11
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
Vollbohren: 150 mmBohrtiefe: 13000 mmWerkstückgewicht: 80 tSteuerung: SiemensTyp: S 7Werkstück-Durchmesser: 1250 mmWerkstückabmessungen min.: 2000 mmAufbohrdurchmesser: 450 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 160 tRaumbedarf ca.: m
Vollbohren: 150 mm
Bohrtiefe: 13000 mm
Werkstückgewicht: 80 t
Steuerung: Siemens
Typ: S 7
Werkstück-Durchmesser: 1250 mm
Werkstückabmessungen min.: 2000 mm
Aufbohrdurchmesser: 450 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 160 t
Raumbedarf ca.: m
Bohrtiefe: 13000 mm
Werkstückgewicht: 80 t
Steuerung: Siemens
Typ: S 7
Werkstück-Durchmesser: 1250 mm
Werkstückabmessungen min.: 2000 mm
Aufbohrdurchmesser: 450 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 160 t
Raumbedarf ca.: m
11
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 250 mmx-Weg: 12000 mmy-Weg: 5850 mmz-Weg: 1600 mmw-Achse: 2000 mmSteuerung: SiemensTyp: 840 D PowerlineDrehzahl: 875 U/minTraghülsenabmessung: 540x560 mmKühlmitteleinrichtung: 1800 lGesamtleistungsbedarf: kWMaschinengewicht ca.: 130 tRaumbedarf ca.: 21x5x10,25 m
Spindeldurchmesser: 250 mm
x-Weg: 12000 mm
y-Weg: 5850 mm
z-Weg: 1600 mm
w-Achse: 2000 mm
Steuerung: Siemens
Typ: 840 D Powerline
Drehzahl: 875 U/min
Traghülsenabmessung: 540x560 mm
Kühlmitteleinrichtung: 1800 l
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 130 t
Raumbedarf ca.: 21x5x10,25 m
x-Weg: 12000 mm
y-Weg: 5850 mm
z-Weg: 1600 mm
w-Achse: 2000 mm
Steuerung: Siemens
Typ: 840 D Powerline
Drehzahl: 875 U/min
Traghülsenabmessung: 540x560 mm
Kühlmitteleinrichtung: 1800 l
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 130 t
Raumbedarf ca.: 21x5x10,25 m
10
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 200 mmx-Weg: 10500 mmy-Weg: 5750 mmz-Weg: 1600 mmw-Achse: 2000 mmSteuerung: SiemensTyp: 840 D SLDrehzahl: 920 U/minTraghülsenabmessung: 540x560 mmKühlmitteleinrichtung: 1500 lGesamtleistungsbedarf: 80 kWMaschinengewicht ca.: 130 tRaumbedarf ca.: 21,9x5x10,75 m
Spindeldurchmesser: 200 mm
x-Weg: 10500 mm
y-Weg: 5750 mm
z-Weg: 1600 mm
w-Achse: 2000 mm
Steuerung: Siemens
Typ: 840 D SL
Drehzahl: 920 U/min
Traghülsenabmessung: 540x560 mm
Kühlmitteleinrichtung: 1500 l
Gesamtleistungsbedarf: 80 kW
Maschinengewicht ca.: 130 t
Raumbedarf ca.: 21,9x5x10,75 m
x-Weg: 10500 mm
y-Weg: 5750 mm
z-Weg: 1600 mm
w-Achse: 2000 mm
Steuerung: Siemens
Typ: 840 D SL
Drehzahl: 920 U/min
Traghülsenabmessung: 540x560 mm
Kühlmitteleinrichtung: 1500 l
Gesamtleistungsbedarf: 80 kW
Maschinengewicht ca.: 130 t
Raumbedarf ca.: 21,9x5x10,75 m
9
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 130 mmx-Weg: 10000 mmy-Weg: 3500 mmz-Weg: 1000 mmSteuerung: HeidenhainTyp: TRT1500 mmWerkstückgewicht: 300 tDrehzahl: 1620 U/minSpindelaufnahme ISO: 50Stützlager: 2Winkelkopf: 2Antriebsleistung: 76 kWPlattenfeld: 109 m²Dicke: 450 mmBohrwerksdrehtisch:: ColgarTischfläche: 2000x2500 mmTischbelastung: 20000 kgVerfahrweg: 2000 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 130 mm
x-Weg: 10000 mm
y-Weg: 3500 mm
z-Weg: 1000 mm
Steuerung: Heidenhain
Typ: TRT1500 mm
Werkstückgewicht: 300 t
Drehzahl: 1620 U/min
Spindelaufnahme ISO: 50
Stützlager: 2
Winkelkopf: 2
Antriebsleistung: 76 kW
Plattenfeld: 109 m²
Dicke: 450 mm
Bohrwerksdrehtisch:: Colgar
Tischfläche: 2000x2500 mm
Tischbelastung: 20000 kg
Verfahrweg: 2000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
x-Weg: 10000 mm
y-Weg: 3500 mm
z-Weg: 1000 mm
Steuerung: Heidenhain
Typ: TRT1500 mm
Werkstückgewicht: 300 t
Drehzahl: 1620 U/min
Spindelaufnahme ISO: 50
Stützlager: 2
Winkelkopf: 2
Antriebsleistung: 76 kW
Plattenfeld: 109 m²
Dicke: 450 mm
Bohrwerksdrehtisch:: Colgar
Tischfläche: 2000x2500 mm
Tischbelastung: 20000 kg
Verfahrweg: 2000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
2
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 130 mmx-Weg: 7700 mmy-Weg: 1500 mmSteuerung: SiemensTyp: Sinumerik 840 CSpindelaufnahme ISO: 130Drehzahl: 1490 U/minAntriebsleistung: 45 kWPlattenfeld: 9000x6000 mmWerkstückgewicht: 100 tGesamtleistungsbedarf: kWRaumbedarf ca.: m
Spindeldurchmesser: 130 mm
x-Weg: 7700 mm
y-Weg: 1500 mm
Steuerung: Siemens
Typ: Sinumerik 840 C
Spindelaufnahme ISO: 130
Drehzahl: 1490 U/min
Antriebsleistung: 45 kW
Plattenfeld: 9000x6000 mm
Werkstückgewicht: 100 t
Gesamtleistungsbedarf: kW
Raumbedarf ca.: m
x-Weg: 7700 mm
y-Weg: 1500 mm
Steuerung: Siemens
Typ: Sinumerik 840 C
Spindelaufnahme ISO: 130
Drehzahl: 1490 U/min
Antriebsleistung: 45 kW
Plattenfeld: 9000x6000 mm
Werkstückgewicht: 100 t
Gesamtleistungsbedarf: kW
Raumbedarf ca.: m
3
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 130 mmx-Weg: 7000 mmy-Weg: 2000 mmAufnahme ISO: 50w-Achse: 1100 mmz-Achse: 350 mmSpannung: 400 VGesamtleistungsbedarf: 30 kWMaschinengewicht ca.: . tRaumbedarf ca.: . m
Spindeldurchmesser: 130 mm
x-Weg: 7000 mm
y-Weg: 2000 mm
Aufnahme ISO: 50
w-Achse: 1100 mm
z-Achse: 350 mm
Spannung: 400 V
Gesamtleistungsbedarf: 30 kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m
x-Weg: 7000 mm
y-Weg: 2000 mm
Aufnahme ISO: 50
w-Achse: 1100 mm
z-Achse: 350 mm
Spannung: 400 V
Gesamtleistungsbedarf: 30 kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m
5
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 125 mmx-Weg: 2500 mmy-Weg: 1900 mmw-Achse: 1100 mmPlanschieberweg: mmBohrwerksdrehtisch:: 1800x1300 mmTisch verstellbar: 1000 mmDigitalanzeige: PfillipsGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 125 mm
x-Weg: 2500 mm
y-Weg: 1900 mm
w-Achse: 1100 mm
Planschieberweg: mm
Bohrwerksdrehtisch:: 1800x1300 mm
Tisch verstellbar: 1000 mm
Digitalanzeige: Pfillips
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
x-Weg: 2500 mm
y-Weg: 1900 mm
w-Achse: 1100 mm
Planschieberweg: mm
Bohrwerksdrehtisch:: 1800x1300 mm
Tisch verstellbar: 1000 mm
Digitalanzeige: Pfillips
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
9
Metal working and machine toolsMachining centersVertical machining centers
x-Weg: 400 mmy-Weg: 300 mmz-Weg: 300 mmSteuerung: JasnacWerkzeugaufnahme: BT30Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 400 mm
y-Weg: 300 mm
z-Weg: 300 mm
Steuerung: Jasnac
Werkzeugaufnahme: BT30
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
y-Weg: 300 mm
z-Weg: 300 mm
Steuerung: Jasnac
Werkzeugaufnahme: BT30
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
11
Metal working and machine toolsMachining centersMachining centers horizontal
x-Weg: 2120 mmy-Weg: 1000 mmz-Weg: 850 mmSteuerung: FanucTischfläche: 3600x1300 mmTeilapparat: CNCWerkzeugwechsler: 60 PosGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 2120 mm
y-Weg: 1000 mm
z-Weg: 850 mm
Steuerung: Fanuc
Tischfläche: 3600x1300 mm
Teilapparat: CNC
Werkzeugwechsler: 60 Pos
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
y-Weg: 1000 mm
z-Weg: 850 mm
Steuerung: Fanuc
Tischfläche: 3600x1300 mm
Teilapparat: CNC
Werkzeugwechsler: 60 Pos
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
7
Metal working and machine toolsLathesHeavy-duty lathes
Drehdurchmesser über Bett: 2100 mmDrehdurchmesser über Support: 1300 mmDrehlänge: 6800 mmWerkstückgewicht: 25000 kgHauptantriebsmotor: 140 kWSteuerung: SiemensTyp: 840 CPlanscheibe: 1100 mmBettbreite: 2500 mmLünette: 600 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser über Bett: 2100 mm
Drehdurchmesser über Support: 1300 mm
Drehlänge: 6800 mm
Werkstückgewicht: 25000 kg
Hauptantriebsmotor: 140 kW
Steuerung: Siemens
Typ: 840 C
Planscheibe: 1100 mm
Bettbreite: 2500 mm
Lünette: 600 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Drehdurchmesser über Support: 1300 mm
Drehlänge: 6800 mm
Werkstückgewicht: 25000 kg
Hauptantriebsmotor: 140 kW
Steuerung: Siemens
Typ: 840 C
Planscheibe: 1100 mm
Bettbreite: 2500 mm
Lünette: 600 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsLathesCenter lathes and spindle lathes
Drehdurchmesser über Bett: 1740 mmDrehdurchmesser über Support: 1300 mmDrehlänge: 15200 mmDrehzahl: 4-180 U/minLünette: 860Planscheibe: 1500 mmPinolendurchmesser: 220 mmBettbreite: 1025 mmGesamtleistungsbedarf: 37 kWMaschinengewicht ca.: t
Drehdurchmesser über Bett: 1740 mm
Drehdurchmesser über Support: 1300 mm
Drehlänge: 15200 mm
Drehzahl: 4-180 U/min
Lünette: 860
Planscheibe: 1500 mm
Pinolendurchmesser: 220 mm
Bettbreite: 1025 mm
Gesamtleistungsbedarf: 37 kW
Maschinengewicht ca.: t
Drehdurchmesser über Support: 1300 mm
Drehlänge: 15200 mm
Drehzahl: 4-180 U/min
Lünette: 860
Planscheibe: 1500 mm
Pinolendurchmesser: 220 mm
Bettbreite: 1025 mm
Gesamtleistungsbedarf: 37 kW
Maschinengewicht ca.: t
10
Metal working and machine toolsLathesLathes
Planscheibendurchmesser: 1100 mmUmlaufdurchmesser: 1250 mmDrehhöhe: 1300 mmSteuerung: SiemensTyp: 805Werkstückgewicht: 4000 kgWerkzeugwechsler: 10Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Planscheibendurchmesser: 1100 mm
Umlaufdurchmesser: 1250 mm
Drehhöhe: 1300 mm
Steuerung: Siemens
Typ: 805
Werkstückgewicht: 4000 kg
Werkzeugwechsler: 10
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Umlaufdurchmesser: 1250 mm
Drehhöhe: 1300 mm
Steuerung: Siemens
Typ: 805
Werkstückgewicht: 4000 kg
Werkzeugwechsler: 10
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsLathesAutomatic bar lathes
Drehdurchmesser: 80 mmDrehlänge: . mmSteuerung: Siemens C 200Werkzeugwechseleinrichtung: 14Umlaufdurchmesser: 130 mmSpindeldurchlass: 42 mmRevolverkopf: 2Gesamtleistungsbedarf: kWMaschinengewicht ca.: t
Drehdurchmesser: 80 mm
Drehlänge: . mm
Steuerung: Siemens C 200
Werkzeugwechseleinrichtung: 14
Umlaufdurchmesser: 130 mm
Spindeldurchlass: 42 mm
Revolverkopf: 2
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Drehlänge: . mm
Steuerung: Siemens C 200
Werkzeugwechseleinrichtung: 14
Umlaufdurchmesser: 130 mm
Spindeldurchlass: 42 mm
Revolverkopf: 2
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
8
Metal working and machine toolsLathesCNC lathes
Drehdurchmesser: 1130 mmDrehlänge: 1800 mmSteuerung: SiemensTyp: 810Drehdurchmesser über Support: 780 mmBettbreite: 710 mmPlanschieber: 1000 mmDrehzahl: 4,5-355 U/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser: 1130 mm
Drehlänge: 1800 mm
Steuerung: Siemens
Typ: 810
Drehdurchmesser über Support: 780 mm
Bettbreite: 710 mm
Planschieber: 1000 mm
Drehzahl: 4,5-355 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Drehlänge: 1800 mm
Steuerung: Siemens
Typ: 810
Drehdurchmesser über Support: 780 mm
Bettbreite: 710 mm
Planschieber: 1000 mm
Drehzahl: 4,5-355 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
5
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg
10
Metal working and machine toolsMachining centersMachining centers horizontal
x-Weg: 2400 mmy-Weg: 1000 mmz-Weg: 1250 mmSteuerung: SiemensTyp: 840 CPalettengröße: 1250x800 mmAnzahl der Paletten: 4Drehtisch: 360 °Drehzahl: 4-5800 U/minTischbelastung: 3000 kgSpindelaufnahme ISO: 50Werkzeugwechsler: 161 Pos.Spindeldurchmesser: 130 mmFräsantrieb: 45 kWGesamtleistungsbedarf: kWMaschinengewicht ca.: 39 tRaumbedarf ca.: 8x7x4,2 m
x-Weg: 2400 mm
y-Weg: 1000 mm
z-Weg: 1250 mm
Steuerung: Siemens
Typ: 840 C
Palettengröße: 1250x800 mm
Anzahl der Paletten: 4
Drehtisch: 360 °
Drehzahl: 4-5800 U/min
Tischbelastung: 3000 kg
Spindelaufnahme ISO: 50
Werkzeugwechsler: 161 Pos.
Spindeldurchmesser: 130 mm
Fräsantrieb: 45 kW
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 39 t
Raumbedarf ca.: 8x7x4,2 m
y-Weg: 1000 mm
z-Weg: 1250 mm
Steuerung: Siemens
Typ: 840 C
Palettengröße: 1250x800 mm
Anzahl der Paletten: 4
Drehtisch: 360 °
Drehzahl: 4-5800 U/min
Tischbelastung: 3000 kg
Spindelaufnahme ISO: 50
Werkzeugwechsler: 161 Pos.
Spindeldurchmesser: 130 mm
Fräsantrieb: 45 kW
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 39 t
Raumbedarf ca.: 8x7x4,2 m
10
Packaging machineryPacking machines
Dimensions of the bars: Ø 35 mm - 2.200
Set: 2 x 5
Space requirement (W x D x H): in box 1,45 x 2,38 x 0,38 m
Dimensions of the bars: Ø 35 mm - 2.200
Set: 2 x 5
Space requirement (W x D x H): in box 1,45 x 2,38 x 0,38 m
Set: 2 x 5
Space requirement (W x D x H): in box 1,45 x 2,38 x 0,38 m
1
Metal working and machine toolsSheet metal working machinesPunching
Punching power: 80 ton
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 40 1/min
Motor: 9 kW
Length: 1700 mm
Width: 1300 mm
Height: 2050 mm
Weight: 1715 kg
Punching power: 80 ton
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 40 1/min
Motor: 9 kW
Length: 1700 mm
Width: 1300 mm
Height: 2050 mm
Weight: 1715 kg
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 40 1/min
Motor: 9 kW
Length: 1700 mm
Width: 1300 mm
Height: 2050 mm
Weight: 1715 kg
2
Metal working and machine toolsLathes
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 75 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 25-100, 100-400, 500-2000 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 2950 kg
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 75 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 25-100, 100-400, 500-2000 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 2950 kg
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 75 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 25-100, 100-400, 500-2000 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 2950 kg
3
Metal working and machine toolsAccessories and spare partsOther
Diameter: 200 mm
Weight of machine: 20 kg
hight 105 mm, mounting via 4 x M12, hole distance 95 mm, outlet 55 mm
Diameter: 200 mm
Weight of machine: 20 kg
hight 105 mm, mounting via 4 x M12, hole distance 95 mm, outlet 55 mm
Weight of machine: 20 kg
hight 105 mm, mounting via 4 x M12, hole distance 95 mm, outlet 55 mm
3
Packaging machineryPacking machines
Working height: 820 mm
Weight of machine: 890 kg
Space requirement (W x D x H): 2,0 x 1,0 x 0,82 m
Condition: the plate is top
nice solid surface plate, welding table
Working height: 820 mm
Weight of machine: 890 kg
Space requirement (W x D x H): 2,0 x 1,0 x 0,82 m
Condition: the plate is top
nice solid surface plate, welding table
Weight of machine: 890 kg
Space requirement (W x D x H): 2,0 x 1,0 x 0,82 m
Condition: the plate is top
nice solid surface plate, welding table
8
Woodworking machinerySawingVertical band saws
Troath: 500 mm
Table size: 700 x 700 mm
Workpiece hight: 300 mm
Tape speed: 19 - 2.900 m/min m/min.
Total power: 1,1 kW
Weight of machine: 920 kg
Space requirement (W x D x H): 1,2 x 1,0 x 2,2 m
Table can be swiveled in all directions, 3 gear levels/speeds - in the individual levels, controllable speed setting
Accessory: Work light, belt welding device
Troath: 500 mm
Table size: 700 x 700 mm
Workpiece hight: 300 mm
Tape speed: 19 - 2.900 m/min m/min.
Total power: 1,1 kW
Weight of machine: 920 kg
Space requirement (W x D x H): 1,2 x 1,0 x 2,2 m
Table can be swiveled in all directions, 3 gear levels/speeds - in the individual levels, controllable speed setting
Accessory: Work light, belt welding device
Table size: 700 x 700 mm
Workpiece hight: 300 mm
Tape speed: 19 - 2.900 m/min m/min.
Total power: 1,1 kW
Weight of machine: 920 kg
Space requirement (W x D x H): 1,2 x 1,0 x 2,2 m
Table can be swiveled in all directions, 3 gear levels/speeds - in the individual levels, controllable speed setting
Accessory: Work light, belt welding device
14
Metal working and machine toolsSheet metal working machinesPress brakes
Pressure: 50 t
Working length: 2550 mm
Distance between columns: 2050 mm
Bending power: bei 1 m - bis 10 mm
Space requirement (W x D x H): 2,9 x 1,6 x 2,3 m
Weight of machine: 4.200 kg
Total power: 4,5 kW
Condition: very good
hardly used, very good condition, all cylinders are tight, press control type PSSAS
Accessory: Various bending tools, documentation, stand for tools
Pressure: 50 t
Working length: 2550 mm
Distance between columns: 2050 mm
Bending power: bei 1 m - bis 10 mm
Space requirement (W x D x H): 2,9 x 1,6 x 2,3 m
Weight of machine: 4.200 kg
Total power: 4,5 kW
Condition: very good
hardly used, very good condition, all cylinders are tight, press control type PSSAS
Accessory: Various bending tools, documentation, stand for tools
Working length: 2550 mm
Distance between columns: 2050 mm
Bending power: bei 1 m - bis 10 mm
Space requirement (W x D x H): 2,9 x 1,6 x 2,3 m
Weight of machine: 4.200 kg
Total power: 4,5 kW
Condition: very good
hardly used, very good condition, all cylinders are tight, press control type PSSAS
Accessory: Various bending tools, documentation, stand for tools
11
Packaging machineryPacking machines
Processing diameter: 320 mm
Coolant system: yes
Mitre cut: 45 -/+ degree
Saw blade dimensions: 4860 x 34 x 1,1 mm
Stop: with ruler 450 mm
Total power: 2,8 kW
Weight of machine: 1500 kg
Space requirement (W x D x H): 2,95 x 1,6 x 1,8 m
Condition: good
on wheels, column-guided, good condition, ready to use
Accessory: 4 band saw blades
Processing diameter: 320 mm
Coolant system: yes
Mitre cut: 45 -/+ degree
Saw blade dimensions: 4860 x 34 x 1,1 mm
Stop: with ruler 450 mm
Total power: 2,8 kW
Weight of machine: 1500 kg
Space requirement (W x D x H): 2,95 x 1,6 x 1,8 m
Condition: good
on wheels, column-guided, good condition, ready to use
Accessory: 4 band saw blades
Coolant system: yes
Mitre cut: 45 -/+ degree
Saw blade dimensions: 4860 x 34 x 1,1 mm
Stop: with ruler 450 mm
Total power: 2,8 kW
Weight of machine: 1500 kg
Space requirement (W x D x H): 2,95 x 1,6 x 1,8 m
Condition: good
on wheels, column-guided, good condition, ready to use
Accessory: 4 band saw blades
12
Metal working and machine toolsMilling machinesOther
X: 750 mm
Y: 500 mm
Z: 500 mm
Table size: 490 x 950 mm
Speed range: 9.000 rpm
Taper fixture: SK 40
Internal coolant supply: yes
Tool changer: 20 -station
Control: Heidenhain 426 / 430 CB
Control on: 36299 h
Program run: 16867 h
Total power: 25 kW
Condition: good, ready for immediate use
Weight of machine: 4000 kg
Space requirement (W x D x H): 2,7 x 2,2 x 2,4 m
Coolant pan, no chip conveyor
Accessory: Documentation, 9 SK40 recordings
X: 750 mm
Y: 500 mm
Z: 500 mm
Table size: 490 x 950 mm
Speed range: 9.000 rpm
Taper fixture: SK 40
Internal coolant supply: yes
Tool changer: 20 -station
Control: Heidenhain 426 / 430 CB
Control on: 36299 h
Program run: 16867 h
Total power: 25 kW
Condition: good, ready for immediate use
Weight of machine: 4000 kg
Space requirement (W x D x H): 2,7 x 2,2 x 2,4 m
Coolant pan, no chip conveyor
Accessory: Documentation, 9 SK40 recordings
Y: 500 mm
Z: 500 mm
Table size: 490 x 950 mm
Speed range: 9.000 rpm
Taper fixture: SK 40
Internal coolant supply: yes
Tool changer: 20 -station
Control: Heidenhain 426 / 430 CB
Control on: 36299 h
Program run: 16867 h
Total power: 25 kW
Condition: good, ready for immediate use
Weight of machine: 4000 kg
Space requirement (W x D x H): 2,7 x 2,2 x 2,4 m
Coolant pan, no chip conveyor
Accessory: Documentation, 9 SK40 recordings
14
Metal working and machine toolsMilling machines
X: 560 mm
Y: 320 mm
Z: 400 mm
Mounting table: 450 x 950 mm
Quill ram: 100 mm
Speed range: 25 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 3 kW
Total power: 3,5 kW
Weight of machine: 1.800 kg
Space requirement (W x D x H): 1,5 x 1,8 x 1,8 m
automatic feed in all axes, beautiful machine in good condition, ready for immediate use
Accessory: Vice, counterholder, various holders, various collets, documentation
X: 560 mm
Y: 320 mm
Z: 400 mm
Mounting table: 450 x 950 mm
Quill ram: 100 mm
Speed range: 25 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 3 kW
Total power: 3,5 kW
Weight of machine: 1.800 kg
Space requirement (W x D x H): 1,5 x 1,8 x 1,8 m
automatic feed in all axes, beautiful machine in good condition, ready for immediate use
Accessory: Vice, counterholder, various holders, various collets, documentation
Y: 320 mm
Z: 400 mm
Mounting table: 450 x 950 mm
Quill ram: 100 mm
Speed range: 25 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 3 kW
Total power: 3,5 kW
Weight of machine: 1.800 kg
Space requirement (W x D x H): 1,5 x 1,8 x 1,8 m
automatic feed in all axes, beautiful machine in good condition, ready for immediate use
Accessory: Vice, counterholder, various holders, various collets, documentation
4
Packaging machineryPacking machines
Trunk length: 3
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m
Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.
Accessory: options: more trunk supports
Trunk length: 3
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m
Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.
Accessory: options: more trunk supports
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m
Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.
Accessory: options: more trunk supports
5
Packaging machineryPacking machines
Suction nozzle diameter: 160 mm
Volume flow: 1780 m³/h
Filter surface: 11,5 sqmtr.
Total power: 2,2 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 1,3 x 0,86 x 1,96 m
Condition: very good
for continuous operation, for vacuuming dry wood dust and wood chips
Accessory: Documentation, 4 used collection bags
Suction nozzle diameter: 160 mm
Volume flow: 1780 m³/h
Filter surface: 11,5 sqmtr.
Total power: 2,2 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 1,3 x 0,86 x 1,96 m
Condition: very good
for continuous operation, for vacuuming dry wood dust and wood chips
Accessory: Documentation, 4 used collection bags
Volume flow: 1780 m³/h
Filter surface: 11,5 sqmtr.
Total power: 2,2 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 1,3 x 0,86 x 1,96 m
Condition: very good
for continuous operation, for vacuuming dry wood dust and wood chips
Accessory: Documentation, 4 used collection bags
14
Metal working and machine toolsLathesCNC lathes
Turning diameter: 284 mm
Turning length: 406 mm
X: 218 mm
Z: 406 mm
Speed range: 6.000 rpm
Spindle bore: 45 mm
Turret: 12 -station
Driven tools: yes
Tool holder: VDI 30
Control: Siemens 810 D
Electrical hand wheel: yes
Chip conveyor: yes
Total power: 25 kW
Weight of machine: 2.694 kg
Space requirement (W x D x H): 3,0 x 1,55 x 1,8 m
Spindle re-stored in 2024, Siemens options: Shopturn, peripheral connection, ShopTurn Work Step programming, transmit and shell surface transformation
Accessory: Documentation, no other accessories
Turning diameter: 284 mm
Turning length: 406 mm
X: 218 mm
Z: 406 mm
Speed range: 6.000 rpm
Spindle bore: 45 mm
Turret: 12 -station
Driven tools: yes
Tool holder: VDI 30
Control: Siemens 810 D
Electrical hand wheel: yes
Chip conveyor: yes
Total power: 25 kW
Weight of machine: 2.694 kg
Space requirement (W x D x H): 3,0 x 1,55 x 1,8 m
Spindle re-stored in 2024, Siemens options: Shopturn, peripheral connection, ShopTurn Work Step programming, transmit and shell surface transformation
Accessory: Documentation, no other accessories
Turning length: 406 mm
X: 218 mm
Z: 406 mm
Speed range: 6.000 rpm
Spindle bore: 45 mm
Turret: 12 -station
Driven tools: yes
Tool holder: VDI 30
Control: Siemens 810 D
Electrical hand wheel: yes
Chip conveyor: yes
Total power: 25 kW
Weight of machine: 2.694 kg
Space requirement (W x D x H): 3,0 x 1,55 x 1,8 m
Spindle re-stored in 2024, Siemens options: Shopturn, peripheral connection, ShopTurn Work Step programming, transmit and shell surface transformation
Accessory: Documentation, no other accessories
5
Food machinesMixing machinery
Cleveland Bratt pan, Stainless, tilting, gas heated bratt pan, capacity 130L, 1Ph
Cleveland Bratt pan, Stainless, tilting, gas heated bratt pan, capacity 130L, 1Ph
5
Food machinesMixing machinery
Cleveland Bratt pan, Stainless, tilting, gas heated bratt pan, capacity 130L, 1Ph
Cleveland Bratt pan, Stainless, tilting, gas heated bratt pan, capacity 130L, 1Ph
5
Food machinesAccessories and spare parts
Toyota LWE130 Powered pallet truck, 2015, max capacity 1300kgs, fork length 1150mm, 1Ph
Toyota LWE130 Powered pallet truck, 2015, max capacity 1300kgs, fork length 1150mm, 1Ph
1
Metal working and machine toolsSheet metal working machinesPunching
Punching power: 110 ton
Throat depth: 500 mm
Max. diameter at sheet thickness (mild steel): 40x20 mm
Max. number of strokes at 20 mm stroke: 28 1/min
Motor: 9 kW
Length: 2080 mm
Width: 1300 mm
Height: 2050 mm
Weight: 3150 kg
Punching power: 110 ton
Throat depth: 500 mm
Max. diameter at sheet thickness (mild steel): 40x20 mm
Max. number of strokes at 20 mm stroke: 28 1/min
Motor: 9 kW
Length: 2080 mm
Width: 1300 mm
Height: 2050 mm
Weight: 3150 kg
Throat depth: 500 mm
Max. diameter at sheet thickness (mild steel): 40x20 mm
Max. number of strokes at 20 mm stroke: 28 1/min
Motor: 9 kW
Length: 2080 mm
Width: 1300 mm
Height: 2050 mm
Weight: 3150 kg
2
Metal working and machine toolsLathes
Swing over bed: 600 mm
Distance between centers: 2000 mm
Centre height: 300 mm
Spindle bore: 80 mm
swing over cross slide: 400 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 90 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 8-62, 62-500, 250-2.000 rpm
Number of feeds: 160
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: 120 - 1/4 Tpi
Module thread range: 0.125 - 30
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Length: 3600 mm
Width: 1500 mm
Height: 1650 mm
Weight: 3110 kg
Swing over bed: 600 mm
Distance between centers: 2000 mm
Centre height: 300 mm
Spindle bore: 80 mm
swing over cross slide: 400 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 90 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 8-62, 62-500, 250-2.000 rpm
Number of feeds: 160
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: 120 - 1/4 Tpi
Module thread range: 0.125 - 30
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Length: 3600 mm
Width: 1500 mm
Height: 1650 mm
Weight: 3110 kg
Distance between centers: 2000 mm
Centre height: 300 mm
Spindle bore: 80 mm
swing over cross slide: 400 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 90 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 8-62, 62-500, 250-2.000 rpm
Number of feeds: 160
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: 120 - 1/4 Tpi
Module thread range: 0.125 - 30
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Length: 3600 mm
Width: 1500 mm
Height: 1650 mm
Weight: 3110 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1550 mm
Max. bending capacity - mild steel: 4.5
Max. plate thickness without prebending - mild steel: 4.5 mm
Max. plate thickness with prebending - mild steel: 3.5 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2.5 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3300 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2370 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 4.5
Max. plate thickness without prebending - mild steel: 4.5 mm
Max. plate thickness with prebending - mild steel: 3.5 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2.5 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3300 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2370 kg
Max. bending capacity - mild steel: 4.5
Max. plate thickness without prebending - mild steel: 4.5 mm
Max. plate thickness with prebending - mild steel: 3.5 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2.5 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3300 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2370 kg
2
Metal working and machine toolsPressesEccentric presses
pressing capacity: 15 to
Tonnage rating point: 1.4 mm
Table length: 320 mm
Table width: 490 mm
Hole in table: 130 mm
Stroke: 1 - 40 mm
Strokes: 200 1/min
Ram guides: 4
Ram adjustment: 40 mm
Ram hole: 30 mm
Throat depth: 200 mm
Daylight: 215 mm
Motor: 1.5 kW
Length: 1160 mm
Width: 1180 mm
Height: 1730 mm
Weight: 922 kg
pressing capacity: 15 to
Tonnage rating point: 1.4 mm
Table length: 320 mm
Table width: 490 mm
Hole in table: 130 mm
Stroke: 1 - 40 mm
Strokes: 200 1/min
Ram guides: 4
Ram adjustment: 40 mm
Ram hole: 30 mm
Throat depth: 200 mm
Daylight: 215 mm
Motor: 1.5 kW
Length: 1160 mm
Width: 1180 mm
Height: 1730 mm
Weight: 922 kg
Tonnage rating point: 1.4 mm
Table length: 320 mm
Table width: 490 mm
Hole in table: 130 mm
Stroke: 1 - 40 mm
Strokes: 200 1/min
Ram guides: 4
Ram adjustment: 40 mm
Ram hole: 30 mm
Throat depth: 200 mm
Daylight: 215 mm
Motor: 1.5 kW
Length: 1160 mm
Width: 1180 mm
Height: 1730 mm
Weight: 922 kg
1
Metal working and machine toolsSheet metal working machinesPunching
Punching power: 50 ton
Throat depth: 130 mm
Max. diameter at sheet thickness (mild steel): 13/27 mm
Max. number of strokes at 20 mm stroke: 23 1/min
Motor: 3 kW
Length: 1100 mm
Width: 900 mm
Height: 1550 mm
Weight: 355 kg
Punching power: 50 ton
Throat depth: 130 mm
Max. diameter at sheet thickness (mild steel): 13/27 mm
Max. number of strokes at 20 mm stroke: 23 1/min
Motor: 3 kW
Length: 1100 mm
Width: 900 mm
Height: 1550 mm
Weight: 355 kg
Throat depth: 130 mm
Max. diameter at sheet thickness (mild steel): 13/27 mm
Max. number of strokes at 20 mm stroke: 23 1/min
Motor: 3 kW
Length: 1100 mm
Width: 900 mm
Height: 1550 mm
Weight: 355 kg
6
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1900 mm
Width: 1350 mm
Height: 1260 mm
Weight: 1060 kg
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1900 mm
Width: 1350 mm
Height: 1260 mm
Weight: 1060 kg
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1900 mm
Width: 1350 mm
Height: 1260 mm
Weight: 1060 kg
8
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 4380x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 325 mm
Cutting capacity 0° square: 325 mm
Cutting capacity 0° flat: 400x315 mm
Cutting capacity 30°: rund 325 mm, quadrat 315 mm, rechteck 380 x 315 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 315 mm
Cutting capacity 60°: rund 190 mm, quadrat 190 mm, rechteck 160 x 325 mm
Working height: 655 mm
Hydraulic motor: 1.1 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 2130 mm
Width: 2150 mm
Height: 1650 mm
Weight: 1860 kg
Saw frame: Double column
Band dimensions: 4380x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 325 mm
Cutting capacity 0° square: 325 mm
Cutting capacity 0° flat: 400x315 mm
Cutting capacity 30°: rund 325 mm, quadrat 315 mm, rechteck 380 x 315 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 315 mm
Cutting capacity 60°: rund 190 mm, quadrat 190 mm, rechteck 160 x 325 mm
Working height: 655 mm
Hydraulic motor: 1.1 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 2130 mm
Width: 2150 mm
Height: 1650 mm
Weight: 1860 kg
Band dimensions: 4380x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 325 mm
Cutting capacity 0° square: 325 mm
Cutting capacity 0° flat: 400x315 mm
Cutting capacity 30°: rund 325 mm, quadrat 315 mm, rechteck 380 x 315 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 315 mm
Cutting capacity 60°: rund 190 mm, quadrat 190 mm, rechteck 160 x 325 mm
Working height: 655 mm
Hydraulic motor: 1.1 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 2130 mm
Width: 2150 mm
Height: 1650 mm
Weight: 1860 kg
7
Metal working and machine toolsSawingBelt saws
Saw frame: Pivot frame
Band dimensions: 3660x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 320x300 mm
Working height: 640 mm
Hydraulic motor: 0.37 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 1900 mm
Width: 850 mm
Height: 1300 mm
Weight: 770 kg
Saw frame: Pivot frame
Band dimensions: 3660x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 320x300 mm
Working height: 640 mm
Hydraulic motor: 0.37 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 1900 mm
Width: 850 mm
Height: 1300 mm
Weight: 770 kg
Band dimensions: 3660x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 320x300 mm
Working height: 640 mm
Hydraulic motor: 0.37 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 1900 mm
Width: 850 mm
Height: 1300 mm
Weight: 770 kg
2
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 10430x54x1,6 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 750 mm
Cutting capacity 0° flat: 1300x700 mm
Cutting capacity 45°: rechteck 850 x 750 mm
Cutting capacity 60°: rechteck 570 x 750 mm
Cutting capacity - 45°: rechteck 850 x 750 mm
Working height: 930 mm
Hydraulic motor: 4 kW
Motor: 11 kW
Coolant pump motor: 0.12 kW
Length: 5500 mm
Width: 2280 mm
Height: 3400 mm
Weight: 8500 kg
Saw frame: Double column
Band dimensions: 10430x54x1,6 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 750 mm
Cutting capacity 0° flat: 1300x700 mm
Cutting capacity 45°: rechteck 850 x 750 mm
Cutting capacity 60°: rechteck 570 x 750 mm
Cutting capacity - 45°: rechteck 850 x 750 mm
Working height: 930 mm
Hydraulic motor: 4 kW
Motor: 11 kW
Coolant pump motor: 0.12 kW
Length: 5500 mm
Width: 2280 mm
Height: 3400 mm
Weight: 8500 kg
Band dimensions: 10430x54x1,6 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 750 mm
Cutting capacity 0° flat: 1300x700 mm
Cutting capacity 45°: rechteck 850 x 750 mm
Cutting capacity 60°: rechteck 570 x 750 mm
Cutting capacity - 45°: rechteck 850 x 750 mm
Working height: 930 mm
Hydraulic motor: 4 kW
Motor: 11 kW
Coolant pump motor: 0.12 kW
Length: 5500 mm
Width: 2280 mm
Height: 3400 mm
Weight: 8500 kg
5
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 6000x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 540 mm
Cutting capacity 0° square: 540 mm
Cutting capacity 0° flat: 750x540 mm
Cutting capacity 45°: rund 510 mm, quadrat 450 mm, rechteck 450 x 540 mm
Cutting capacity 60°: rund 270 mm, quadrat 250 mm, rechteck 250 x 540 mm
Working height: 695 mm
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3000 mm
Width: 1300 mm
Height: 2150 mm
Weight: 2445 kg
Saw frame: Double column
Band dimensions: 6000x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 540 mm
Cutting capacity 0° square: 540 mm
Cutting capacity 0° flat: 750x540 mm
Cutting capacity 45°: rund 510 mm, quadrat 450 mm, rechteck 450 x 540 mm
Cutting capacity 60°: rund 270 mm, quadrat 250 mm, rechteck 250 x 540 mm
Working height: 695 mm
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3000 mm
Width: 1300 mm
Height: 2150 mm
Weight: 2445 kg
Band dimensions: 6000x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 540 mm
Cutting capacity 0° square: 540 mm
Cutting capacity 0° flat: 750x540 mm
Cutting capacity 45°: rund 510 mm, quadrat 450 mm, rechteck 450 x 540 mm
Cutting capacity 60°: rund 270 mm, quadrat 250 mm, rechteck 250 x 540 mm
Working height: 695 mm
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3000 mm
Width: 1300 mm
Height: 2150 mm
Weight: 2445 kg
6
Metal working and machine toolsSheet metal working machinesFeed straighteners
Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. coil width for version with pneumatic downholder: 80 mm
Length: 1600 mm
Width: 1550 mm
Height: 2000 mm
Weight: 580 kg
Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. coil width for version with pneumatic downholder: 80 mm
Length: 1600 mm
Width: 1550 mm
Height: 2000 mm
Weight: 580 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. coil width for version with pneumatic downholder: 80 mm
Length: 1600 mm
Width: 1550 mm
Height: 2000 mm
Weight: 580 kg
8
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3200 mm
Max. thickness - mild steel: 2 mm
Max. thickness - stainless steel: 1.2 mm
Length: 3650 mm
Width: 1700 mm
Height: 1300 mm
Weight: 3100 kg
Cutting length: 3200 mm
Max. thickness - mild steel: 2 mm
Max. thickness - stainless steel: 1.2 mm
Length: 3650 mm
Width: 1700 mm
Height: 1300 mm
Weight: 3100 kg
Max. thickness - mild steel: 2 mm
Max. thickness - stainless steel: 1.2 mm
Length: 3650 mm
Width: 1700 mm
Height: 1300 mm
Weight: 3100 kg
3
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 130 ton
Throat depth: 600 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 50x18 mm
Stroke: 80 mm
Flat steel: 600x18 (max. 600x20 mit Deformation) mm
Angle steel: 120x120x11 (max. 150x150x15 mit Deformation) mm
Round / square steel: 45/40 mm
Notcher: 130x12 mm
Bending unit: 250x12 mm
Motor: 15 kW
Punching power: 130 ton
Throat depth: 600 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 50x18 mm
Stroke: 80 mm
Flat steel: 600x18 (max. 600x20 mit Deformation) mm
Angle steel: 120x120x11 (max. 150x150x15 mit Deformation) mm
Round / square steel: 45/40 mm
Notcher: 130x12 mm
Bending unit: 250x12 mm
Motor: 15 kW
Throat depth: 600 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 50x18 mm
Stroke: 80 mm
Flat steel: 600x18 (max. 600x20 mit Deformation) mm
Angle steel: 120x120x11 (max. 150x150x15 mit Deformation) mm
Round / square steel: 45/40 mm
Notcher: 130x12 mm
Bending unit: 250x12 mm
Motor: 15 kW
9
Printing machineryFlexographic and gravure printing
Flexo wash pk13o washing device
Dimensions inside 120 x 80 cm
Flexo wash pk13o washing device
Dimensions inside 120 x 80 cm
Dimensions inside 120 x 80 cm
2
Metal working and machine toolsPressesEccentric presses
pressing capacity: 30 to
Tonnage rating point: 2 mm
Table length: 400 mm
Table width: 600 mm
Hole in table: 150 mm
Stroke: 1 - 60 mm
Strokes: 140 1/min
Ram guides: 4
Ram adjustment: 60 mm
Ram hole: 40 mm
Throat depth: 200 mm
Daylight: 300 mm
Motor: 3 kW
Length: 1300 mm
Width: 1150 mm
Height: 2050 mm
Weight: 1670 kg
pressing capacity: 30 to
Tonnage rating point: 2 mm
Table length: 400 mm
Table width: 600 mm
Hole in table: 150 mm
Stroke: 1 - 60 mm
Strokes: 140 1/min
Ram guides: 4
Ram adjustment: 60 mm
Ram hole: 40 mm
Throat depth: 200 mm
Daylight: 300 mm
Motor: 3 kW
Length: 1300 mm
Width: 1150 mm
Height: 2050 mm
Weight: 1670 kg
Tonnage rating point: 2 mm
Table length: 400 mm
Table width: 600 mm
Hole in table: 150 mm
Stroke: 1 - 60 mm
Strokes: 140 1/min
Ram guides: 4
Ram adjustment: 60 mm
Ram hole: 40 mm
Throat depth: 200 mm
Daylight: 300 mm
Motor: 3 kW
Length: 1300 mm
Width: 1150 mm
Height: 2050 mm
Weight: 1670 kg
14
Packaging machineryPacking machines
Air pressure: 6 bar
Transport speed: 3 - 30 mtr/min.
Welding frame dimension: 580 x 440 mm
Film core diameter: 76 mm
Max. film roll diameter: 300 mm
Max. product hight: 180 mm
Film thickness: 7 to 60 mµ
Max. film width: 550 mm
Cyclic output: 40 cycle/min
Total power: 3,7 kW
Weight of machine: 560 kg
Space requirement (W x D x H): 2,05 x 1,72 x 1,48 m
Condition: good
Fully automatic angle sealing machine with integrated shrink tunnel, permanently heated sealing knife, DELTA color touch screen, horizontal and vertical photocells, foil material polyolefin fine shrink foils, PVC, PLA and other organic foils
Accessory: no other accessories, documentation
Air pressure: 6 bar
Transport speed: 3 - 30 mtr/min.
Welding frame dimension: 580 x 440 mm
Film core diameter: 76 mm
Max. film roll diameter: 300 mm
Max. product hight: 180 mm
Film thickness: 7 to 60 mµ
Max. film width: 550 mm
Cyclic output: 40 cycle/min
Total power: 3,7 kW
Weight of machine: 560 kg
Space requirement (W x D x H): 2,05 x 1,72 x 1,48 m
Condition: good
Fully automatic angle sealing machine with integrated shrink tunnel, permanently heated sealing knife, DELTA color touch screen, horizontal and vertical photocells, foil material polyolefin fine shrink foils, PVC, PLA and other organic foils
Accessory: no other accessories, documentation
Transport speed: 3 - 30 mtr/min.
Welding frame dimension: 580 x 440 mm
Film core diameter: 76 mm
Max. film roll diameter: 300 mm
Max. product hight: 180 mm
Film thickness: 7 to 60 mµ
Max. film width: 550 mm
Cyclic output: 40 cycle/min
Total power: 3,7 kW
Weight of machine: 560 kg
Space requirement (W x D x H): 2,05 x 1,72 x 1,48 m
Condition: good
Fully automatic angle sealing machine with integrated shrink tunnel, permanently heated sealing knife, DELTA color touch screen, horizontal and vertical photocells, foil material polyolefin fine shrink foils, PVC, PLA and other organic foils
Accessory: no other accessories, documentation
14
Metal working and machine toolsMilling machines
X: 300 mm
Y: 160 mm
Z: 340 mm
Speed range: 40 - 2000 rpm
Mounting table: 600 x 210 mm
Taper fixture: SK 40
Control: TNC 113 Digitalanzeige
Total power: 1,5 / 1,9 kW
Weight of machine: 1050 kg
Space requirement (W x D x H): 1,2 x 1,0 x 1,9 m
Condition: good
Rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head on spindle head movable 100 mm
Accessory: machine feet, documentation, counterholder, no other accessories
X: 300 mm
Y: 160 mm
Z: 340 mm
Speed range: 40 - 2000 rpm
Mounting table: 600 x 210 mm
Taper fixture: SK 40
Control: TNC 113 Digitalanzeige
Total power: 1,5 / 1,9 kW
Weight of machine: 1050 kg
Space requirement (W x D x H): 1,2 x 1,0 x 1,9 m
Condition: good
Rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head on spindle head movable 100 mm
Accessory: machine feet, documentation, counterholder, no other accessories
Y: 160 mm
Z: 340 mm
Speed range: 40 - 2000 rpm
Mounting table: 600 x 210 mm
Taper fixture: SK 40
Control: TNC 113 Digitalanzeige
Total power: 1,5 / 1,9 kW
Weight of machine: 1050 kg
Space requirement (W x D x H): 1,2 x 1,0 x 1,9 m
Condition: good
Rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head on spindle head movable 100 mm
Accessory: machine feet, documentation, counterholder, no other accessories
8
Food machinesMeat processing
NNP Dairy trolleys, 8x dairy trolleys, dimensions 680mm L x 420mm W x 1300mm H, Mobile
NNP Dairy trolleys, 8x dairy trolleys, dimensions 680mm L x 420mm W x 1300mm H, Mobile