6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 6010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 1.5 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
Opening of upper beam: 180 mm
Working height: 835 mm
Motor: 2.2 kW
Length with electrical shear: 7200 mm
Width: 1300 mm
Height: 1900 mm
Weight: 2000 kg
Bending length: 6010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 1.5 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
Opening of upper beam: 180 mm
Working height: 835 mm
Motor: 2.2 kW
Length with electrical shear: 7200 mm
Width: 1300 mm
Height: 1900 mm
Weight: 2000 kg
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 1.5 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm
Opening of upper beam: 180 mm
Working height: 835 mm
Motor: 2.2 kW
Length with electrical shear: 7200 mm
Width: 1300 mm
Height: 1900 mm
Weight: 2000 kg
6
Metal working and machine toolsSanding machinesCylindrical grinding machines
ALPA RVC - 250 Rundtischflachschleifmaschine-Magnetdurchmesser 300mm-Magnetdrehtisch / zweistufig-Höhenverstellung per Hand-Schleifhöhe ca. 130mm-Seitliche Schleifscheibenabzieheinichtung-Kühlmitteleinrichtung-Maschinenumhausung-MaschinenfüßeCnj7Zheuvu-Umbau der Elektrik - Neu-Zwei Ersatzschleifscheiben-BedienwerkzeugAbmaße:LxBxH 1,2x1x1,8 Meter /Gewicht 850Kg
ALPA RVC - 250 Rundtischflachschleifmaschine
-Magnetdurchmesser 300mm
-Magnetdrehtisch / zweistufig
-Höhenverstellung per Hand
-Schleifhöhe ca. 130mm
-Seitliche Schleifscheibenabzieheinichtung
-Kühlmitteleinrichtung
-Maschinenumhausung
-Maschinenfüße
Cnj7Zheuvu
-Umbau der Elektrik - Neu
-Zwei Ersatzschleifscheiben
-Bedienwerkzeug
Abmaße:
LxBxH 1,2x1x1,8 Meter /Gewicht 850Kg
-Magnetdurchmesser 300mm
-Magnetdrehtisch / zweistufig
-Höhenverstellung per Hand
-Schleifhöhe ca. 130mm
-Seitliche Schleifscheibenabzieheinichtung
-Kühlmitteleinrichtung
-Maschinenumhausung
-Maschinenfüße
Cnj7Zheuvu
-Umbau der Elektrik - Neu
-Zwei Ersatzschleifscheiben
-Bedienwerkzeug
Abmaße:
LxBxH 1,2x1x1,8 Meter /Gewicht 850Kg
9
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 110 ton
Throat depth: 300 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x20 (28x28) mm
Stroke: 80 mm
Strokes: 17 1/min
Flat steel: 600x15 (400x20) mm
Blade length: 605 mm
Angle steel: 152x152x13 mm
Round / square steel: 50/50 mm
Notcher: 90x52x13 mm
Motor: 5 kW
Length: 2130 mm
Width: 1200 mm
Height: 2200 mm
Weight: 2500 kg
Punching power: 110 ton
Throat depth: 300 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x20 (28x28) mm
Stroke: 80 mm
Strokes: 17 1/min
Flat steel: 600x15 (400x20) mm
Blade length: 605 mm
Angle steel: 152x152x13 mm
Round / square steel: 50/50 mm
Notcher: 90x52x13 mm
Motor: 5 kW
Length: 2130 mm
Width: 1200 mm
Height: 2200 mm
Weight: 2500 kg
Throat depth: 300 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x20 (28x28) mm
Stroke: 80 mm
Strokes: 17 1/min
Flat steel: 600x15 (400x20) mm
Blade length: 605 mm
Angle steel: 152x152x13 mm
Round / square steel: 50/50 mm
Notcher: 90x52x13 mm
Motor: 5 kW
Length: 2130 mm
Width: 1200 mm
Height: 2200 mm
Weight: 2500 kg
3
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 50 ton
Throat depth: 177 mm
Number of stations: 5
Cylinder: 1
Max. diameter at sheet thickness (mild steel): 31 x 12 mm
Strokes: 34 1/min
Flat steel: 350 x 15 mm
Angle steel: 80 x 8 mm
Round / square steel: 35 / 30 mm
Notcher: 10 mm
Bending unit: 100 x 10 mm
Motor: 3 kW
Length: 1300 mm
Width: 1100 mm
Height: 1850 mm
Weight: 950 kg
Punching power: 50 ton
Throat depth: 177 mm
Number of stations: 5
Cylinder: 1
Max. diameter at sheet thickness (mild steel): 31 x 12 mm
Strokes: 34 1/min
Flat steel: 350 x 15 mm
Angle steel: 80 x 8 mm
Round / square steel: 35 / 30 mm
Notcher: 10 mm
Bending unit: 100 x 10 mm
Motor: 3 kW
Length: 1300 mm
Width: 1100 mm
Height: 1850 mm
Weight: 950 kg
Throat depth: 177 mm
Number of stations: 5
Cylinder: 1
Max. diameter at sheet thickness (mild steel): 31 x 12 mm
Strokes: 34 1/min
Flat steel: 350 x 15 mm
Angle steel: 80 x 8 mm
Round / square steel: 35 / 30 mm
Notcher: 10 mm
Bending unit: 100 x 10 mm
Motor: 3 kW
Length: 1300 mm
Width: 1100 mm
Height: 1850 mm
Weight: 950 kg
7
Metal working and machine toolsSheet metal working machinesFeed straighteners
Coil weight: 1250 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 520 mm
Max. coil width: 300 mm
Min. coil width for version with pneumatic downholder: 80 mm
Motor: 0.75 kW
Length: 1800 mm
Width: 1400 mm
Height: 1700 mm
Weight: 420 kg
Coil weight: 1250 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 520 mm
Max. coil width: 300 mm
Min. coil width for version with pneumatic downholder: 80 mm
Motor: 0.75 kW
Length: 1800 mm
Width: 1400 mm
Height: 1700 mm
Weight: 420 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 520 mm
Max. coil width: 300 mm
Min. coil width for version with pneumatic downholder: 80 mm
Motor: 0.75 kW
Length: 1800 mm
Width: 1400 mm
Height: 1700 mm
Weight: 420 kg
1
Metal working and machine toolsSheet metal working machinesPunching
Punching power: 80 ton
Throat depth: 510 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 40 1/min
Motor: 9 kW
Length: 1700 mm
Width: 1300 mm
Height: 2050 mm
Weight: 1715 kg
Punching power: 80 ton
Throat depth: 510 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 40 1/min
Motor: 9 kW
Length: 1700 mm
Width: 1300 mm
Height: 2050 mm
Weight: 1715 kg
Throat depth: 510 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 40 1/min
Motor: 9 kW
Length: 1700 mm
Width: 1300 mm
Height: 2050 mm
Weight: 1715 kg
2
Metal working and machine toolsSheet metal working machinesFeed straighteners
Coil weight: 4000 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 4000 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
2
Metal working and machine toolsSheet metal working machinesFeed straighteners
Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
2
Metal working and machine toolsSheet metal working machinesFeed straighteners
Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
2
Metal working and machine toolsSheet metal working machinesFeed straighteners
Coil weight: 1250 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 1250 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
1
Metal working and machine toolsSheet metal working machines
Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 21 mm
Bevel angle: 60 °
Spindle speed (load-free): 1300-1560 rpm
Bevel of tube outer edge: 300 m/min
Motor: 1.6 kW
Length: 441 mm
Width: 366 mm
Height: 339 mm
Weight: 23 kg
Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 21 mm
Bevel angle: 60 °
Spindle speed (load-free): 1300-1560 rpm
Bevel of tube outer edge: 300 m/min
Motor: 1.6 kW
Length: 441 mm
Width: 366 mm
Height: 339 mm
Weight: 23 kg
Suitable for tubes: 1
Max. bevel width: 21 mm
Bevel angle: 60 °
Spindle speed (load-free): 1300-1560 rpm
Bevel of tube outer edge: 300 m/min
Motor: 1.6 kW
Length: 441 mm
Width: 366 mm
Height: 339 mm
Weight: 23 kg
6
Metal working and machine toolsDeburring machines
Working width: 1300
Sheet thickness range - mild steel: 150 mm
Brush diameter: 150 mm
Vacuum area: 250x350 mm
Table height: 945 mm
Motor: 0.75 kW
Length: 1400 mm
Width: 1000 mm
Height: 1450 mm
Weight: 300 kg
Working width: 1300
Sheet thickness range - mild steel: 150 mm
Brush diameter: 150 mm
Vacuum area: 250x350 mm
Table height: 945 mm
Motor: 0.75 kW
Length: 1400 mm
Width: 1000 mm
Height: 1450 mm
Weight: 300 kg
Sheet thickness range - mild steel: 150 mm
Brush diameter: 150 mm
Vacuum area: 250x350 mm
Table height: 945 mm
Motor: 0.75 kW
Length: 1400 mm
Width: 1000 mm
Height: 1450 mm
Weight: 300 kg
2
Metal working and machine toolsLathes
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
5
Metal working and machine toolsLathes
Swing over bed: 730 mm
Distance between centers: 2000 mm
Centre height: 365 mm
Spindle bore: 155 mm
swing over cross slide: 500 mm
Width of bed: 400 mm
Spindle taper: 160 M
Spindle speed steps: 12
Spindle revs: 16 - 800 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 9 mm/r
Cross feed range: 0.02 - 4.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 90 mm
Inch thread range: 60 - 1/3 Tpi
Module thread range: 0.125 - 22.5
DP thread range: 240 - 1 1/3
Cross slide travel: 390 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Swing over bed: 730 mm
Distance between centers: 2000 mm
Centre height: 365 mm
Spindle bore: 155 mm
swing over cross slide: 500 mm
Width of bed: 400 mm
Spindle taper: 160 M
Spindle speed steps: 12
Spindle revs: 16 - 800 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 9 mm/r
Cross feed range: 0.02 - 4.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 90 mm
Inch thread range: 60 - 1/3 Tpi
Module thread range: 0.125 - 22.5
DP thread range: 240 - 1 1/3
Cross slide travel: 390 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Distance between centers: 2000 mm
Centre height: 365 mm
Spindle bore: 155 mm
swing over cross slide: 500 mm
Width of bed: 400 mm
Spindle taper: 160 M
Spindle speed steps: 12
Spindle revs: 16 - 800 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 9 mm/r
Cross feed range: 0.02 - 4.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 90 mm
Inch thread range: 60 - 1/3 Tpi
Module thread range: 0.125 - 22.5
DP thread range: 240 - 1 1/3
Cross slide travel: 390 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 225 mm
Motor power: 11 kW
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 200 to
Stroke: 500 mm
Space between columns: 1250x1000 mm
Daylight: 600 mm
Rapid speed: 25 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 1550 mm
Width: 1300 mm
Height: 2700 mm
pressing capacity: 200 to
Stroke: 500 mm
Space between columns: 1250x1000 mm
Daylight: 600 mm
Rapid speed: 25 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 1550 mm
Width: 1300 mm
Height: 2700 mm
Stroke: 500 mm
Space between columns: 1250x1000 mm
Daylight: 600 mm
Rapid speed: 25 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 1550 mm
Width: 1300 mm
Height: 2700 mm
6
Metal working and machine toolsPressesWorkshop press
pressing capacity: 160 to
Cylinder fix or moveable: horizontal moveable
Stroke: 400 mm
Daylight: 900 mm
Distance between columns: 1100 mm
Working speed: 6 mm/s
Retraction speed: 9.8 mm/s
Motor power: 5 kW
Length: 1400 mm
Width: 1000 mm
Height: 2500 mm
Weight: 1300 kg
pressing capacity: 160 to
Cylinder fix or moveable: horizontal moveable
Stroke: 400 mm
Daylight: 900 mm
Distance between columns: 1100 mm
Working speed: 6 mm/s
Retraction speed: 9.8 mm/s
Motor power: 5 kW
Length: 1400 mm
Width: 1000 mm
Height: 2500 mm
Weight: 1300 kg
Cylinder fix or moveable: horizontal moveable
Stroke: 400 mm
Daylight: 900 mm
Distance between columns: 1100 mm
Working speed: 6 mm/s
Retraction speed: 9.8 mm/s
Motor power: 5 kW
Length: 1400 mm
Width: 1000 mm
Height: 2500 mm
Weight: 1300 kg
5
Metal working and machine toolsSawingBelt saws
Saw frame: Pivot frame
Band dimensions: 2730x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 230 mm
Cutting capacity 0° square: 230 mm
Cutting capacity 0° flat: 320x130 mm
Cutting capacity 45°: rund 210 mm, quadrat 180 mm, rechteck 230 x 160 mm
Cutting capacity 60°: rund 120 mm, quadrat 100 mm, rechteck 120 x 100 mm
Cutting capacity - 45°: rund 180 mm, quadrat 150 mm, rechteck 230 x 100 mm
Working height: 760 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Motor: 1.3 kW
Length: 1350 mm
Width: 700 mm
Height: 1300 mm
Weight: 430 kg
Saw frame: Pivot frame
Band dimensions: 2730x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 230 mm
Cutting capacity 0° square: 230 mm
Cutting capacity 0° flat: 320x130 mm
Cutting capacity 45°: rund 210 mm, quadrat 180 mm, rechteck 230 x 160 mm
Cutting capacity 60°: rund 120 mm, quadrat 100 mm, rechteck 120 x 100 mm
Cutting capacity - 45°: rund 180 mm, quadrat 150 mm, rechteck 230 x 100 mm
Working height: 760 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Motor: 1.3 kW
Length: 1350 mm
Width: 700 mm
Height: 1300 mm
Weight: 430 kg
Band dimensions: 2730x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 230 mm
Cutting capacity 0° square: 230 mm
Cutting capacity 0° flat: 320x130 mm
Cutting capacity 45°: rund 210 mm, quadrat 180 mm, rechteck 230 x 160 mm
Cutting capacity 60°: rund 120 mm, quadrat 100 mm, rechteck 120 x 100 mm
Cutting capacity - 45°: rund 180 mm, quadrat 150 mm, rechteck 230 x 100 mm
Working height: 760 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Motor: 1.3 kW
Length: 1350 mm
Width: 700 mm
Height: 1300 mm
Weight: 430 kg
1
Metal working and machine toolsSawingOther
Weight of machine: 12 kg
Roller block, height 980 mm, adjustable, roller width 500 mm
Weight of machine: 12 kg
Roller block, height 980 mm, adjustable, roller width 500 mm
Roller block, height 980 mm, adjustable, roller width 500 mm
1
Metal working and machine toolsSawingOther
Weight of machine: 7 kg
Height adjustable, 3 pieces available, height 0.94 m
Weight of machine: 7 kg
Height adjustable, 3 pieces available, height 0.94 m
Height adjustable, 3 pieces available, height 0.94 m
1
Metal working and machine toolsSawingOther
Weight of machine: 10 kg
Weight of machine: 10 kg
14
Woodworking machinerySawingBelt saws
Sectional area 90° flat: links 130 x 100
Sectional area 45° flat: 200 x 160 mm
Square-section area 90°: 240 mm
Square-section area 45°: links 190 - rechts 160 mm
Square-section area 60°: links 110
Sectional area 90° circular: 255 mm
Sectional area 45° circular: links 210 - rechts 180 mm
Sectional area 60° circular: 135
Cutting speed: 37 x 74 oder 18 - 110 m/min
Saw blade dimensions: 2760 x 27 x 0,9 mm
Space requirement (W x D x H): 1,7 x 1,3 x 1,9 m
Total power: 2,5 kW
Weight of machine: 600 kg
Condition: sehr gut
well-maintained miter saw, little used, top condition
Accessory: Documentation, 4 m roller conveyor left, 3 m roller conveyor right with manual stop, 4 saw blades, various tools
Sectional area 90° flat: links 130 x 100
Sectional area 45° flat: 200 x 160 mm
Square-section area 90°: 240 mm
Square-section area 45°: links 190 - rechts 160 mm
Square-section area 60°: links 110
Sectional area 90° circular: 255 mm
Sectional area 45° circular: links 210 - rechts 180 mm
Sectional area 60° circular: 135
Cutting speed: 37 x 74 oder 18 - 110 m/min
Saw blade dimensions: 2760 x 27 x 0,9 mm
Space requirement (W x D x H): 1,7 x 1,3 x 1,9 m
Total power: 2,5 kW
Weight of machine: 600 kg
Condition: sehr gut
well-maintained miter saw, little used, top condition
Accessory: Documentation, 4 m roller conveyor left, 3 m roller conveyor right with manual stop, 4 saw blades, various tools
Sectional area 45° flat: 200 x 160 mm
Square-section area 90°: 240 mm
Square-section area 45°: links 190 - rechts 160 mm
Square-section area 60°: links 110
Sectional area 90° circular: 255 mm
Sectional area 45° circular: links 210 - rechts 180 mm
Sectional area 60° circular: 135
Cutting speed: 37 x 74 oder 18 - 110 m/min
Saw blade dimensions: 2760 x 27 x 0,9 mm
Space requirement (W x D x H): 1,7 x 1,3 x 1,9 m
Total power: 2,5 kW
Weight of machine: 600 kg
Condition: sehr gut
well-maintained miter saw, little used, top condition
Accessory: Documentation, 4 m roller conveyor left, 3 m roller conveyor right with manual stop, 4 saw blades, various tools
5
Metal working and machine toolsSanding machinesSurface grinding machines
Grinding length: 1500 mm
Grinding width: 600 mm
Grinding hight: 400 mm
Table load: 950 kg
Table size: 1900 x 550 mm
Magnetic table: 1500 x 600 mm
Grinding wheel dimensions: 400 x 100 x 127 mm
Spindle speed: 1000 - 3450 rpm
Spindle drive: 10 - 34 kW
Weight of machine: 6.700 kg
Travel distances 1575 x 560, overhauled by Wema Service in 2012
Accessory: balancing device, 4 grinding wheels, 2 holders
Grinding length: 1500 mm
Grinding width: 600 mm
Grinding hight: 400 mm
Table load: 950 kg
Table size: 1900 x 550 mm
Magnetic table: 1500 x 600 mm
Grinding wheel dimensions: 400 x 100 x 127 mm
Spindle speed: 1000 - 3450 rpm
Spindle drive: 10 - 34 kW
Weight of machine: 6.700 kg
Travel distances 1575 x 560, overhauled by Wema Service in 2012
Accessory: balancing device, 4 grinding wheels, 2 holders
Grinding width: 600 mm
Grinding hight: 400 mm
Table load: 950 kg
Table size: 1900 x 550 mm
Magnetic table: 1500 x 600 mm
Grinding wheel dimensions: 400 x 100 x 127 mm
Spindle speed: 1000 - 3450 rpm
Spindle drive: 10 - 34 kW
Weight of machine: 6.700 kg
Travel distances 1575 x 560, overhauled by Wema Service in 2012
Accessory: balancing device, 4 grinding wheels, 2 holders
5
Metal working and machine toolsSanding machinesSurface grinding machines
Grinding length: 600 mm
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg
little used, from a workshop for the disabled, travel distances 750 x 350
Accessory: balancing device, 1 grinding wheel, 2 holders
Grinding length: 600 mm
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg
little used, from a workshop for the disabled, travel distances 750 x 350
Accessory: balancing device, 1 grinding wheel, 2 holders
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg
little used, from a workshop for the disabled, travel distances 750 x 350
Accessory: balancing device, 1 grinding wheel, 2 holders
4
Packaging machineryPacking machines
Weight of machine: 18 kg
Space requirement (W x D x H): 0,67 x 0,9 x 0,28 m
was installed in a Schlichter, Profi Packer SCV 5844 Pro Servo, 90° angle 480 x 620 mm
Weight of machine: 18 kg
Space requirement (W x D x H): 0,67 x 0,9 x 0,28 m
was installed in a Schlichter, Profi Packer SCV 5844 Pro Servo, 90° angle 480 x 620 mm
Space requirement (W x D x H): 0,67 x 0,9 x 0,28 m
was installed in a Schlichter, Profi Packer SCV 5844 Pro Servo, 90° angle 480 x 620 mm
7
Food machinesPackaging machinery
Translyft Rotary table scissor lift, Translyft 3Tonne hydraulic scissor lift with rotary table, table diameter 1300mm, mounted on weigh cells with a scale, 3Ph
Translyft Rotary table scissor lift, Translyft 3Tonne hydraulic scissor lift with rotary table, table diameter 1300mm, mounted on weigh cells with a scale, 3Ph
5
Food machinesBakery-, pastry equipmentMixers
Silverson GX High shear mixer, Stainless, high shear mixer, shaft length 1300mm, head diameter 150mm, 7.5Kw, 3Ph
Silverson GX High shear mixer, Stainless, high shear mixer, shaft length 1300mm, head diameter 150mm, 7.5Kw, 3Ph
6
Food machinesOther
Bouwpaco Stainless conveyor, Stainless, Intralox belt, belt dimensions 2200mm x 1300mm, stainless side guides, 3Ph
Bouwpaco Stainless conveyor, Stainless, Intralox belt, belt dimensions 2200mm x 1300mm, stainless side guides, 3Ph
7
Food machinesCatering technologyWashing machines
IWM EDI13A Utensil washer, 2011, stainless utensil washer, ideal for trays, pots, pans, pan washer cycle 2mins to 10mins, cleaning chamber 1300mm L x 700mm W x 800mm H, 13.7Kw, 3Ph
IWM EDI13A Utensil washer, 2011, stainless utensil washer, ideal for trays, pots, pans, pan washer cycle 2mins to 10mins, cleaning chamber 1300mm L x 700mm W x 800mm H, 13.7Kw, 3Ph
8
Packaging machineryPacking machines
Operating pressure: max. 12.000 bar
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m
The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.
Operating pressure: max. 12.000 bar
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m
The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m
The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 100 to
Stroke: 300 mm
Ram: 680x420 mm
Table: 1100x600 mm
Daylight: 500 mm
Rapid speed: 175 mm/s
Working speed: 55 mm/s
Retraction speed: 37 mm/s
Motor: 7.5 kW
Length: 1900 mm
Width: 1300 mm
Height: 2750 mm
Weight: 5400 kg
pressing capacity: 100 to
Stroke: 300 mm
Ram: 680x420 mm
Table: 1100x600 mm
Daylight: 500 mm
Rapid speed: 175 mm/s
Working speed: 55 mm/s
Retraction speed: 37 mm/s
Motor: 7.5 kW
Length: 1900 mm
Width: 1300 mm
Height: 2750 mm
Weight: 5400 kg
Stroke: 300 mm
Ram: 680x420 mm
Table: 1100x600 mm
Daylight: 500 mm
Rapid speed: 175 mm/s
Working speed: 55 mm/s
Retraction speed: 37 mm/s
Motor: 7.5 kW
Length: 1900 mm
Width: 1300 mm
Height: 2750 mm
Weight: 5400 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 200 to
Stroke: 500 mm
Table: 1000x600 mm
Daylight: 640 mm
Rapid speed: 21 mm/s
Working speed: 2 mm/s
Motor: 5.5 kW
Length: 1800 mm
Width: 1300 mm
Height: 2500 mm
Weight: 6400 kg
pressing capacity: 200 to
Stroke: 500 mm
Table: 1000x600 mm
Daylight: 640 mm
Rapid speed: 21 mm/s
Working speed: 2 mm/s
Motor: 5.5 kW
Length: 1800 mm
Width: 1300 mm
Height: 2500 mm
Weight: 6400 kg
Stroke: 500 mm
Table: 1000x600 mm
Daylight: 640 mm
Rapid speed: 21 mm/s
Working speed: 2 mm/s
Motor: 5.5 kW
Length: 1800 mm
Width: 1300 mm
Height: 2500 mm
Weight: 6400 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 40 to
Stroke: 500 mm
Table: 700x500 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1400 mm
Width: 900 mm
Height: 2200 mm
Weight: 1300 kg
pressing capacity: 40 to
Stroke: 500 mm
Table: 700x500 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1400 mm
Width: 900 mm
Height: 2200 mm
Weight: 1300 kg
Stroke: 500 mm
Table: 700x500 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1400 mm
Width: 900 mm
Height: 2200 mm
Weight: 1300 kg
14
Metal working and machine toolsLathesCNC lathes
Swing diameter over cross slide: 480 mm
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good
Main drive motor and gearbox overhauled, spindle with new bearings, ball screws X, Z new, scraper sliding plates new, oil mist extraction, chuck Röhm FD-HS 400-3 - ID 414896, hollow clamping cylinder SMW Autoblok type ZHDC-SN125/93, two gear stages
Accessory: towable steady rest max. clamping diameter 245 mm, towable tailstock, 4 driven tools (axial and radial),1 set of jaws
Swing diameter over cross slide: 480 mm
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good
Main drive motor and gearbox overhauled, spindle with new bearings, ball screws X, Z new, scraper sliding plates new, oil mist extraction, chuck Röhm FD-HS 400-3 - ID 414896, hollow clamping cylinder SMW Autoblok type ZHDC-SN125/93, two gear stages
Accessory: towable steady rest max. clamping diameter 245 mm, towable tailstock, 4 driven tools (axial and radial),1 set of jaws
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good
Main drive motor and gearbox overhauled, spindle with new bearings, ball screws X, Z new, scraper sliding plates new, oil mist extraction, chuck Röhm FD-HS 400-3 - ID 414896, hollow clamping cylinder SMW Autoblok type ZHDC-SN125/93, two gear stages
Accessory: towable steady rest max. clamping diameter 245 mm, towable tailstock, 4 driven tools (axial and radial),1 set of jaws
2
Metal working and machine toolsSheet metal working machines
pressing capacity: 200 to
Stroke: 500 mm
Table: 2.000 x 1.550 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2400 mm
Width: 2000 mm
Height: 2600 mm
Weight: 4800 kg
pressing capacity: 200 to
Stroke: 500 mm
Table: 2.000 x 1.550 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2400 mm
Width: 2000 mm
Height: 2600 mm
Weight: 4800 kg
Stroke: 500 mm
Table: 2.000 x 1.550 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2400 mm
Width: 2000 mm
Height: 2600 mm
Weight: 4800 kg
3
Metal working and machine toolsOther
Werkzeugschrank / Schubladenschrank / ZeichnungsschrankDjnzttAnzahl der Schubladen / 14 StückAbmaße: LxBxH 1830x1430x1300mmGewicht ca. 650Kg
Werkzeugschrank / Schubladenschrank / Zeichnungsschrank
Djnztt
Anzahl der Schubladen / 14 Stück
Abmaße: LxBxH 1830x1430x1300mm
Gewicht ca. 650Kg
Djnztt
Anzahl der Schubladen / 14 Stück
Abmaße: LxBxH 1830x1430x1300mm
Gewicht ca. 650Kg
4
Metal working and machine toolsOther
Stangenlademagazin/Tal AUTO 65-32LxBxH ca. 5000x1000x1500mmGewicht ca. 600 kgAnsteuerung über CNC-Maschine(war an einer traub-cnc maschine angebaut)B0doi8oziqStangen -Durchmesser ca. 5-65mmStangenlänge ca. 4 meterHöhenverstellung ca. 1000-1300mmStromversorgung 380 VoltMax. Vorschubweg ca. 4000mmMax. Stangengewicht ca. 150 kg
Stangenlademagazin/Tal AUTO 65-32
LxBxH ca. 5000x1000x1500mm
Gewicht ca. 600 kg
Ansteuerung über CNC-Maschine
(war an einer traub-cnc maschine angebaut)
B0doi8oziq
Stangen -Durchmesser ca. 5-65mm
Stangenlänge ca. 4 meter
Höhenverstellung ca. 1000-1300mm
Stromversorgung 380 Volt
Max. Vorschubweg ca. 4000mm
Max. Stangengewicht ca. 150 kg
LxBxH ca. 5000x1000x1500mm
Gewicht ca. 600 kg
Ansteuerung über CNC-Maschine
(war an einer traub-cnc maschine angebaut)
B0doi8oziq
Stangen -Durchmesser ca. 5-65mm
Stangenlänge ca. 4 meter
Höhenverstellung ca. 1000-1300mm
Stromversorgung 380 Volt
Max. Vorschubweg ca. 4000mm
Max. Stangengewicht ca. 150 kg
3
Metal working and machine toolsDrilling machines and boring millsHighspeed radial drilling machines
DONAU DR 23 / Schnellradialbohrmaschine-Bohrleistung / Stahl ca. 28mm-Ausladung 700mm-Spindelkonus MK3-Drehzahlbereich 70-1550 U/min / Getriebeschaltung-Vorschubbereich 0,075 - 0,3mm-Bohrtiefe 130mm-Gewindeschneideinrichtung-Hydraulische Klemmung-Seitliche Aufspannfläche für grössere Werkstücke-Bohrfutter-DokumentationAbmaße:LxBxH 2x1,7x1,9 Meter /Gewicht 2000Kg
DONAU DR 23 / Schnellradialbohrmaschine
-Bohrleistung / Stahl ca. 28mm
-Ausladung 700mm
-Spindelkonus MK3
-Drehzahlbereich 70-1550 U/min / Getriebeschaltung
-Vorschubbereich 0,075 - 0,3mm
-Bohrtiefe 130mm
-Gewindeschneideinrichtung
-Hydraulische Klemmung
-Seitliche Aufspannfläche für grössere Werkstücke
-Bohrfutter
-Dokumentation
Abmaße:
LxBxH 2x1,7x1,9 Meter /Gewicht 2000Kg
-Bohrleistung / Stahl ca. 28mm
-Ausladung 700mm
-Spindelkonus MK3
-Drehzahlbereich 70-1550 U/min / Getriebeschaltung
-Vorschubbereich 0,075 - 0,3mm
-Bohrtiefe 130mm
-Gewindeschneideinrichtung
-Hydraulische Klemmung
-Seitliche Aufspannfläche für grössere Werkstücke
-Bohrfutter
-Dokumentation
Abmaße:
LxBxH 2x1,7x1,9 Meter /Gewicht 2000Kg
9
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines
TIEFLOCHBOHRMASCHINE / MEWAG - IXION TL 500-Bohrtiefe ca. 500mm-Tischgröße 800x450mm-Tisch drehbar/winkelverstellbar 0- 360 Grad-Bohrhub / Von Hand-Bohrfutter-Diverse TieflochbohrerAbmaße:LxBxH 1,6x0,8x1,6 MeterGewicht: 1300KgNwgphbfb
TIEFLOCHBOHRMASCHINE / MEWAG - IXION TL 500
-Bohrtiefe ca. 500mm
-Tischgröße 800x450mm
-Tisch drehbar/winkelverstellbar 0- 360 Grad
-Bohrhub / Von Hand
-Bohrfutter
-Diverse Tieflochbohrer
Abmaße:
LxBxH 1,6x0,8x1,6 Meter
Gewicht: 1300Kg
Nwgphbfb
-Bohrtiefe ca. 500mm
-Tischgröße 800x450mm
-Tisch drehbar/winkelverstellbar 0- 360 Grad
-Bohrhub / Von Hand
-Bohrfutter
-Diverse Tieflochbohrer
Abmaße:
LxBxH 1,6x0,8x1,6 Meter
Gewicht: 1300Kg
Nwgphbfb
2
Metal working and machine toolsSheet metal working machines
pressing capacity: 300 to
Stroke: 500 mm
Table: 3.000 x 2.050 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1300 mm
Hydraulicaly movable stand: 2000 mm
Length: 3100 mm
Width: 3000 mm
Height: 2600 mm
Weight: 11500 kg
pressing capacity: 300 to
Stroke: 500 mm
Table: 3.000 x 2.050 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1300 mm
Hydraulicaly movable stand: 2000 mm
Length: 3100 mm
Width: 3000 mm
Height: 2600 mm
Weight: 11500 kg
Stroke: 500 mm
Table: 3.000 x 2.050 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1300 mm
Hydraulicaly movable stand: 2000 mm
Length: 3100 mm
Width: 3000 mm
Height: 2600 mm
Weight: 11500 kg
8
Food machinesBakery-, pastry equipmentCutting machines
Polin Multidrop Junior pro-fast depositor Serial: 1303112 2013, The Polin Multidrop® Junior is an automatic depositor, dosing machine and wire cut machine. for processing firm biscuit doughs and soft batters with or without inclusions. 100 program presets, and a wire-cut attachment makes it possible to produce a wide range of butter cookies, sugar cookies, hard biscuits, eclairs, cream puffs, cupcakes, muffins, sponge cakes and more. comes with a new motor, some spares and the manual, 3Ph
Polin Multidrop Junior pro-fast depositor Serial: 1303112 2013, The Polin Multidrop® Junior is an automatic depositor, dosing machine and wire cut machine. for processing firm biscuit doughs and soft batters with or without inclusions. 100 program presets, and a wire-cut attachment makes it possible to produce a wide range of butter cookies, sugar cookies, hard biscuits, eclairs, cream puffs, cupcakes, muffins, sponge cakes and more. comes with a new motor, some spares and the manual, 3Ph
5
Metal working and machine toolsSawingBelt saws
Saw frame: Pivot frame
Band dimensions: 3660x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 320x300 mm
Working height: 640 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Motor: 2 kW
Length: 1900 mm
Width: 850 mm
Height: 1300 mm
Weight: 770 kg
Saw frame: Pivot frame
Band dimensions: 3660x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 320x300 mm
Working height: 640 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Motor: 2 kW
Length: 1900 mm
Width: 850 mm
Height: 1300 mm
Weight: 770 kg
Band dimensions: 3660x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 320x300 mm
Working height: 640 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Motor: 2 kW
Length: 1900 mm
Width: 850 mm
Height: 1300 mm
Weight: 770 kg
13
Plastic processing machinesInjection molding machines
Ref. no.: 17148
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening width: 1008 mm
Platen size (h x v): 1300 x 1460 mm
Injection unit
Screw diameter: 50 + 18 + 25 + 25 + 25 + 25 mm
Injection volume: 422 + 38 + 54 + 54 + 54 +54 cm³
Shot weight: 380 + 35 + 48 +48 + 48 + 48 g
Injection pressure: 2322 + 2500 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22000 + 6600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
Ref. no.: 17148
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening width: 1008 mm
Platen size (h x v): 1300 x 1460 mm
Injection unit
Screw diameter: 50 + 18 + 25 + 25 + 25 + 25 mm
Injection volume: 422 + 38 + 54 + 54 + 54 +54 cm³
Shot weight: 380 + 35 + 48 +48 + 48 + 48 g
Injection pressure: 2322 + 2500 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22000 + 6600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening width: 1008 mm
Platen size (h x v): 1300 x 1460 mm
Injection unit
Screw diameter: 50 + 18 + 25 + 25 + 25 + 25 mm
Injection volume: 422 + 38 + 54 + 54 + 54 +54 cm³
Shot weight: 380 + 35 + 48 +48 + 48 + 48 g
Injection pressure: 2322 + 2500 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22000 + 6600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
11
Metal working and machine toolsAccessories and spare partsOther
X: 160 mm
Z: 340 mm
Max. tool weight: 20
Tool holder: SK 50
Air pressure: 6
Total power: 0,2 kW
Weight of machine: 160 kg
Space requirement (W x D x H): 0,8 x 1,2 x 1,0 m
Condition: very good
4-6 bar, with PC, monitor and label printer, software: Multivision MVIS II
Accessory: Documentation, label printer
X: 160 mm
Z: 340 mm
Max. tool weight: 20
Tool holder: SK 50
Air pressure: 6
Total power: 0,2 kW
Weight of machine: 160 kg
Space requirement (W x D x H): 0,8 x 1,2 x 1,0 m
Condition: very good
4-6 bar, with PC, monitor and label printer, software: Multivision MVIS II
Accessory: Documentation, label printer
Z: 340 mm
Max. tool weight: 20
Tool holder: SK 50
Air pressure: 6
Total power: 0,2 kW
Weight of machine: 160 kg
Space requirement (W x D x H): 0,8 x 1,2 x 1,0 m
Condition: very good
4-6 bar, with PC, monitor and label printer, software: Multivision MVIS II
Accessory: Documentation, label printer
5
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 2550 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5500 mm
Width: 2000 mm
Height: 1900 mm
Weight: 13000 kg
Bending length: 2550 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5500 mm
Width: 2000 mm
Height: 1900 mm
Weight: 13000 kg
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5500 mm
Width: 2000 mm
Height: 1900 mm
Weight: 13000 kg
6
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1550 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 2050 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 4250 mm
Width: 960 mm
Height: 1100 mm
Weight: 2800 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 4250 mm
Width: 960 mm
Height: 1100 mm
Weight: 2800 kg
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 4250 mm
Width: 960 mm
Height: 1100 mm
Weight: 2800 kg
6
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1550 mm
Max. bending capacity - mild steel: 2
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.5 kW
Length: 2130 mm
Width: 700 mm
Height: 1200 mm
Weight: 545 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 2
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.5 kW
Length: 2130 mm
Width: 700 mm
Height: 1200 mm
Weight: 545 kg
Max. bending capacity - mild steel: 2
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.5 kW
Length: 2130 mm
Width: 700 mm
Height: 1200 mm
Weight: 545 kg
1
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 2050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 3200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1500 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 3200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1500 kg
Max. bending capacity - mild steel: 3
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 3200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1500 kg
1
Metal working and machine toolsSawingBelt saws
Saw frame: Pivot frame
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x240 mm
Cutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Length: 2800 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
Saw frame: Pivot frame
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x240 mm
Cutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Length: 2800 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x240 mm
Cutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Length: 2800 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
2
Metal working and machine toolsSawingBelt saws
Saw frame: Pivot frame
Band dimensions: 3120 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm
Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1750 mm
Weight: 420 kg
Saw frame: Pivot frame
Band dimensions: 3120 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm
Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1750 mm
Weight: 420 kg
Band dimensions: 3120 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm
Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1750 mm
Weight: 420 kg