Stock LM 123


A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.

Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.

Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.

A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).

Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt

pressing capacity: 160 to
Cylinder fix or moveable: horizontal moveable
Stroke: 400 mm
Daylight: 900 mm
Distance between columns: 1450 mm
Working speed: 7,4 / 11,8 mm/s
Retraction speed: 9.8 mm/s
Table: 1450 x 450 mm
Motor power: 5 kW
Length: 1640 mm
Width: 1000 mm
Height: 2550 mm
Weight: 1300 kg

pressing capacity: 40 to
Cylinder fix or moveable: fix
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 900 mm
Rapid speed: 29 mm/s
Working speed: 4 mm/s
Length: 1600 mm
Width: 1000 mm
Height: 2350 mm
Weight: 790 kg

pressing capacity: 70 to
Cylinder fix or moveable: fix
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 900 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Length: 1700 mm
Width: 1000 mm
Height: 2400 mm
Weight: 980 kg

pressing capacity: 70 to
Cylinder fix or moveable: horizontal moveable
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 900 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Length: 1700 mm
Width: 1000 mm
Height: 2400 mm
Weight: 1050 kg

pressing capacity: 70 to
Cylinder fix or moveable: fix
Stroke: 350 mm
Distance between columns: 900 mm
Rapid speed: 29 mm/s
Working speed: 3 mm/s
Length: 1700 mm
Width: 700 mm
Height: 2100 mm
Weight: 650 kg

pressing capacity: 70 to
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Distance between columns: 900 mm
Rapid speed: 29 mm/s
Working speed: 3 mm/s
Horizontal movable cylinder: 550 mm
Length: 1700 mm
Width: 700 mm
Height: 2100 mm
Weight: 720 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 1050 mm
Rapid speed: 25 mm/s
Working speed: 2 mm/s
Length: 1900 mm
Width: 1200 mm
Height: 2450 mm
Weight: 1300 kg

pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 1050 mm
Rapid speed: 25 mm/s
Working speed: 2 mm/s
Length: 1900 mm
Width: 1200 mm
Height: 2450 mm
Weight: 1770 kg

pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 1550 mm
Rapid speed: 25 mm/s
Working speed: 2 mm/s
Length: 2400 mm
Width: 1200 mm
Height: 2450 mm
Weight: 1960 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 350 mm
Distance between columns: 1050 mm
Rapid speed: 28 mm/s
Working speed: 2 mm/s
Length: 1900 mm
Width: 850 mm
Height: 2250 mm
Weight: 1030 kg

pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Distance between columns: 1050 mm
Rapid speed: 28 mm/s
Working speed: 2 mm/s
Horizontal movable cylinder: 650 mm
Length: 1950 mm
Width: 1000 mm
Height: 2250 mm
Weight: 1220 kg

pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Distance between columns: 1500 mm
Rapid speed: 28 mm/s
Working speed: 2 mm/s
Horizontal movable cylinder: 1150 mm
Length: 2400 mm
Width: 1000 mm
Height: 2250 mm
Weight: 1500 kg

pressing capacity: 150 to
Cylinder fix or moveable: fix
Stroke: 350 mm
Distance between columns: 1500 mm
Rapid speed: 22 mm/s
Working speed: 3 mm/s
Length: 2500 mm
Width: 1200 mm
Height: 2500 mm
Weight: 2450 kg

pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Distance between columns: 1500 mm
Rapid speed: 22 mm/s
Working speed: 3 mm/s
Horizontal movable cylinder: 1000 mm
Length: 2500 mm
Width: 1200 mm
Height: 2500 mm
Weight: 2500 kg

pressing capacity: 150 to
Stroke: 500 mm
Table: 1.550 x 2.000 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2350 mm
Width: 2000 mm
Height: 2500 mm
Weight: 4100 kg

pressing capacity: 150 to
Stroke: 500 mm
Table: 2.500 x 2.050 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1400 mm
Hydraulicaly movable stand: 1600 mm
Length: 2900 mm
Width: 2500 mm
Height: 2500 mm
Weight: 5200 kg

pressing capacity: 200 to
Stroke: 500 mm
Table: 2.500 x 2.050 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1450 mm
Hydraulicaly movable stand: 1600 mm
Length: 2950 mm
Width: 2500 mm
Height: 2600 mm
Weight: 6500 kg

pressing capacity: 200 to
Stroke: 500 mm
Table: 3.000 x 2.550 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2550 mm
Horizontal movable cylinder: 1900 mm
Hydraulicaly movable stand: 2000 mm
Length: 3550 mm
Width: 3000 mm
Height: 2600 mm
Weight: 8500 kg

pressing capacity: 300 to
Cylinder fix or moveable: fix
Stroke: 500 mm
Distance between columns: 1500 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Length: 2800 mm
Width: 1500 mm
Height: 3200 mm
Weight: 6000 kg

pressing capacity: 300 to
Stroke: 500 mm
Table: 4.000 x 2.550 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2550 mm
Horizontal movable cylinder: 1.8 mm
Hydraulicaly movable stand: 2.8 mm
Length: 3550 mm
Width: 4000 mm
Height: 2600 mm
Weight: 15000 kg

pressing capacity: 300 to
Stroke: 500 mm
Table: 5.000 x 3.050 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 3050 mm
Horizontal movable cylinder: 2.2 mm
Hydraulicaly movable stand: 3.6 mm
Length: 4000 mm
Width: 5000 mm
Height: 2600 mm
Weight: 18000 kg

pressing capacity: 500 to
Stroke: 500 mm
Table: 5.000 x 2.550 mm
Daylight: 700 mm
Rapid speed: 18 mm/s
Working speed: 3 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2550 mm
Horizontal movable cylinder: 1.7 mm
Hydraulicaly movable stand: 3.6 mm
Length: 5000 mm
Width: 5000 mm
Height: 3000 mm
Weight: 32000 kg

pressing capacity: 600 to
Stroke: 500 mm
Table: 6.000 x 2.550 mm
Daylight: 700 mm
Rapid speed: 18 mm/s
Working speed: 3 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2550 mm
Horizontal movable cylinder: 2200 mm
Hydraulicaly movable stand: 4600 mm
Length: 5000 mm
Width: 6000 mm
Height: 3000 mm
Weight: 43000 kg

pressing capacity: 200 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1900 mm
Piston diameter: 320x210 mm
Working speed: 5 mm/s
Retraction speed: 20 mm/s
Length: 2460 mm
Width: 1600 mm
Height: 2700 mm
Weight: 4800 kg

pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 220x160 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2560 mm
Width: 1000 mm
Height: 2480 mm
Weight: 1755 kg

pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 220x160 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2430 mm
Weight: 1600 kg

pressing capacity: 80 to
Cylinder fix or moveable: horizontal moveable
Stroke: 250 mm
Distance between columns: 1040 mm
Distance between table and toolholder: 865 mm
Piston diameter: 200x120 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1710 mm
Width: 700 mm
Height: 2100 mm
Weight: 835 kg

pressing capacity: 60 to
Cylinder fix or moveable: horizontal moveable
Stroke: 250 mm
Distance between columns: 1040 mm
Piston diameter: 180x120 mm
Working speed: 4 mm/s
Retraction speed: 10 mm/s
Length: 1710 mm
Width: 700 mm
Height: 2100 mm
Weight: 800 kg

pressing capacity: 150 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2500 mm
Width: 1000 mm
Height: 2270 mm
Weight: 2100 kg

pressing capacity: 150 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2050 mm
Width: 1000 mm
Height: 2270 mm
Weight: 1870 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 220x160 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2500 mm
Width: 1000 mm
Height: 2200 mm
Weight: 1600 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 220x160 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2050 mm
Width: 1000 mm
Height: 2200 mm
Weight: 1500 kg

pressing capacity: 80 to
Cylinder fix or moveable: fix
Stroke: 250 mm
Distance between columns: 1040 mm
Piston diameter: 200x120 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1810 mm
Width: 750 mm
Height: 2100 mm
Weight: 835 kg

pressing capacity: 60 to
Cylinder fix or moveable: fix
Stroke: 250 mm
Distance between columns: 1040 mm
Piston diameter: 180x120 mm
Working speed: 4 mm/s
Retraction speed: 10 mm/s
Length: 1710 mm
Width: 700 mm
Height: 2100 mm
Weight: 800 kg

pressing capacity: 30 to
Cylinder fix or moveable: fix
Stroke: 775 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1500 mm
Width: 700 mm
Height: 2015 mm
Weight: 400 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 680 mm
Distance between columns: 1520 mm
Rapid speed: 8 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 500x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2350 mm
Weight: 2500 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Bending length: 1500 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 680 mm
Rapid speed: 10 mm/s
Working speed: 5 mm/s
Max. bending capacity (mild steel): 6 mm
Table: 500x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2500 kg

Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x11 mm
Flat steel: 350x10 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm

pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1520 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Table: 600x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Bending length: 1020 mm
Stroke: 300 mm
Distance between columns: 1020 mm
Distance between table and toolholder: 680 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 6 mm
Table: 500x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2082 kg

Druck: 100 t
Hub: 300 mm
Zylinder: 205 MM
Abstand Tisch / Stößel: 520 mm
Tischfläche: 1100X350 mm
Stößelfläche: 350X350 mm
Gesamtleistungsbedarf: 7,5 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Tragkraft in kg: 2500 kg
Hub: 3200 mm
Gabellänge: 1000 mm
Antriebsart: Gas
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: 4,25 m

Tragkraft in kg: 4000 kg
Hub: 3200 mm
Gabellänge: . mm
Kraftstoffart: Diesel
Maschinengewicht ca.: 6,43 t
Raumbedarf ca.: 4,8x1,5x2,4 m

Backpack leaf blower
Engine: 1 cylinder, 2-stroke, air-cooled. CE approved. Power: 2.5 kW / 6500 r-min
Tank capacity: 1.5 L
fuel ratio: 1:25 gasoline E10

Heidelberg KSBA cilinder

Max size: 46x 58.5 cm
Die cutting cilinder with inking unit

Heidelberg S-cilinder

Format: 54 x 72 cm
No damage
With inking unit.