pressing capacity: 70 to
Stroke: 500 mm
Ram: 700x350 mm
Table: 700x500 mm
Daylight: 500 mm
Throat depth: 250 mm
Rapid speed: 24 mm/s
Working speed: 5 mm/s
Motor: 4 kW
Length: 1500 mm
Width: 1000 mm
Height: 2500 mm
Weight: 2100 kg

Koenig and Bauer Alphajet Into Inkjet printer, Serial: MID060, 2020, Stainless inkjet printer, auto jet closure, heated ink chamber, touch screen controls, extremely low solvent consumption - 2ml/h (at 20'C) high quality bar codes and 2D codings, 1Ph

AirMac cft 203 compressor

380 volt

Wohlenberg 115 CutTec paper cutting guillotine

Available immediately from stock.
Description:
– Color screen
- Chromed air table
– Positioning of items using the hand wheel
– Optimized cutting cycle
– Smoothly adjustable pressing pressure
– Automated knife change from the front
– Quick replacement of knives
–
Technical data:
Cutting length: 1150 mm
Maximum stack height: 165 mm
Input depth: 1150 mm

Wohlenberg 76 Paper Cutting Machine (1995)

The Wohlenberg 76 paper cutting machine, built in 1995, is a reliable and accurate cutting solution for printing companies. With a cutting width of 76 cm and a maximum stacking height of 10 cm, this machine is ideal for processing various print formats. Equipped with hydraulic drive, a digital display, and extensive safety features, the Wohlenberg 76 offers both ease of use and safety. The machine weighs approximately 1500 kg, which contributes to its stability and precision.

Danmatic Decor Unit 900 topping conveyor, 2018, Stainless, décor unit 900, is designed for decoration of buns, rolls, full dough sheet products and more, with spray glaze jets, brand new HMI touch screen Siemens panel, belt dimensions 2600mm x 880mm, mobile, 3Ph

Danmatic Spray unit spray glazing machine, 2017, stainless, spray glazing machine, belt dimensions 2150mm x 820mm, stainless mesh belt, four top mounted spray jets, adjustable pressure controls, can work with a great variety of liquids from pure water to oil and glaze egg, mobile, 3Ph

SR Pack Flighted elevator conveyor Stainless, elevates from 300mm to 900mm, belt width 400mm, 0.3Kw, 3Ph

Anritsu SV Checkweigher, Serial: 4600060685, 2007, Stainless checkweigher, belt dimensions 900mm x 250mm, checkweigher platform 220mm x 250mm, from 12g - 3000g, 1Ph

Doyon FC2E Pizza oven, Serial: 7096, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph

Doyon FC2E Pizza oven, Serial: 7097, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph

Doyon FC2E Pizza oven, Serial: 7092, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph

pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2480 mm
Weight: 1870 kg

KÖLSCH Universalfräsmaschine UNI1-UNI4<br /><br />Universalfräsmaschine geeignet für Teilkreis- und Vollkreisarbeiten<br />Lochbilder setzen mit integriertem Teiltisch und Koordinatenfrässystem

Messplatte / Montagelineale / Messleiste
3 x Längen in Holz Transportkiste
1 x 2700mm
2 x 1600mm
Gesamtgewicht ca. 150 Kg
Rm3tbzht

DONAU DR 40z Schnellradialbohrmaschine<br /><br />Technische Daten:<br />- Bohrleistung ins volle Stahl ST 60: 40 mm<br />- Bohrleistung GG 25: 50 mm<br />- Gewindeschneiden ST60: M 33<br />- Gewindeschneiden GG 25: M 45<br />- Bohrspindelaufnahme: MK<br />- Spindeldurchmesser: 55 mm<br />- Pinolenhub: 200 mm<br />- 18 Bohrspindeldrehzahlen 35-1800 U/min<br />- Bohrvorschübe 0,075 - 0,60 mm/U<br />- Höhenverstellung der Bohrsäule: 450 mm<br />- Bohrradius min/max: 305 / 1005 mm<br />- Tischgröße: 1200 x 600 mm<br />- Antrieb 400 V / 6 kW<br />- Platzbedarf: ca. B 1900 x H 2800 T 2300 mm<br />- Gewicht: ca.1800 kg

CNC-Werkzeugfräsmaschine HERMLE UWF 902 - S

-Steuerung / Heidenhain TNC 426
-Verfahrwege X/Y/Z 600-450-500mm
-Drehzahlbereich 20-6300 U/min
-Vorschubbereich 1-10000mm/Min
-Werkzeugaufnahme SK 40
-Vertikal / Horizontalfräseinrichtung
-Kühlmitteleinrichtung
-Bohrpinole
-Maschinenumhausung
-Winkeltisch
-Dokumentation

Abmaße:
LxBxH ca. 4x2,8x2,4 Meter
Bb9I9Vd0Rs3
Gewicht ca. 4000Kg

Kraftformer / ECKOLD KF 324 / incl. 3 Satz Werkzeuge

-Ausladung - horizontal 340mm
-Ausladung - vertikal 245mm
-Arbeitshub 8mm
-Arbeitstakte pro Minute 400
-Leistung des Antriebsmotors 1,5 KW

-Verformbare Blechdicke:
-Stahl 400N/mm2 max: 2mm
-Alu 250/mm2 max: 2,5mm
Bbw8Lxeib
-Edelstahl/600N/mm2 max. 1,5mm
-Stösselverstellung über Handrad

Inclusive 3xWerkzeuge:
-Spannwerkzeug kpl. LFS 60S
-Z / Glättwerkzeug TP25 S /starr
-Plastikformer kpl. PFW 60 S
-Dokumentation
-Maschine anschlussfertig

Abmaße:
LxBxH 1,4x0,8x1,7 Meter
Gewicht ca. 550Kg

Leit u. Zugspindeldrehmaschine / WEILER COMMODOR 180 GSD (Vorführmaschine)
Begf9Au

-Spitzenweite 1000mm
-Spitzenhöhe 180mm
-Stangendurchlass 56mm
-Umlauf. über Bett 380mm
-Umlauf. über Planschieber 215mm
-Drehzahlbereich / Getriebemaschine 25-2000U/min
-Automatische Längs/Planvorschübe
-Gewinde /Metrisch /Zoll/Diametral
-Pinolenkegel MK4
-Pinolenhub 150mm

-3 - Achsdigitalanzeige
-Kühlmitteleinrichtung
-Multifix mit Einsätzen
-Dreibackenfutter - 200mm
-Arbeitslicht
-Spänerückwand
-Dokumentation



Abmaße:
LxBxH 2,6x1,4x1,7Meter /Gewicht: 1900Kg

NOVOPRESS - hydraulische Lochstanze

-Drei Stanzwerkzeuge
-Hydraulik samt Fussschalter separat
-Längenmesssysthem
-Schutzgitter

Gsuoykwqx
Abmaße:
LxBxH 1,7x1,2x1,7 Meter
Gewicht ca. 700Kg

LÄPPMASCHINE Hahn & Kolb LHD 0


-Läppscheibendurchmesser max. 400mm
-Max. Werkstückhöhe 100mm
-Max. Entfernung zwischen den Gussläppscheiben 80mm
-Drehzahlbereich 40/80/160 U/min
-Drehzahl / Hauptantriebsmotor 700/1400/2800 U/min
-Gesamtleistung 1,8-2,7KW
-Abdreheinrichtung handbetätigt
-Originaldokumentation
-Gut erhaltener Originalzustand


Abmaße:
LxBxH 1,4x1,3x1,9 Meter / Gewicht: 1600Kg
Bb0J3K9T

ATLANTIC HPA 30-135 / Guter Zustand unter Strom

-Druckkraft 135 Tonnen
-Abkantlänge 3050mm
-Durchgang zwischen den Ständern 2550mm
-Komplette Oberwange/Werkzeuge u. separate Segmente in verschiedenen Längen
-Zwei Matritzen
-Motorische Höhenverstellung
-Hinteranschlag manuell
-Frontauflage 2x
-Fußschalter / Handschalter
-unter Strom vorführbereit


Gxb82Nm
Abmaße:
LxBxH 4x1,8x2,4Meter / Gewicht ca. 8,5 tonnen

Zahnrad Abwälzfräsmaschine LIEBHERR / LORENZ S800

-Funktionsvideo au Anfrage

-Max. Werkstück mit Gegenhalter 600mm
-Max. Werkstück mit zurückgezogenem Gegenhalter 800mm
-Max. Weg des Frässchlittens 360mm
-Grösste fräsbare Teilung bei grösstem Werkstück 5Pi im normalen Leistungsbereich 8Pi
-Aufnahmekegel / Frässpindel MK5
-Fräsdorn 22/27/32/40mm
-Max. Fräserdurchmesser 186mm
-Max. Fräserlänge 170mm
-Max. Fräserverschiebung 80mm
-Fräserdrehzahlen 40-220 U/min
-Vorschübe stufenlos regelbar / Vertikal
-Vorschübe stufenlos regelbar / Horizontal
-Vorschübe stufenlos regelbar /Tangential
-Aufspanntisch ohne wasserrand 550mm
-Aufspanntischbohrung 100mm
-Aufspannkegeldorn MK 5
-Aufspanndorn 36mm

ZUBEHÖR:
-1xPalette Wechselräder
-1xPalette Abwälzfräser
-1xPalette Aufspanndorne
-Dokumentation / Maschinenfüße

Abmaße:
LxBxH 3,6x1,8x1,9 Meter / Gewicht 5500Kg


Won93G8C

TRAUB TNS 65 D / 5 - Achs CNC Drehmaschine

-KOMPLETTE TECHNISCHE DATEN siehe "Datenblätter"
-Steuerung TX8 D
-Baujahr 1994
-C - Achse
-Stangendurchlass 65mm
-Hydraulischer Stangenlademagazin
-Diverse angetriebene Werkzeuge
-Werkzeughalter
-Dreibackenfutter
-Dokumentation

Bitivuxdo0

DELTA LC 400 - Rundtischflachschleifmaschine<br /><br />-Schleifdurchmesser 400mm<br />B0Okfavpsm<br />-Schleifhöhe ca. 220mm<br />-Drehzahlbereich 2850U/min<br />-Schleifscheibenabmessung 200x80mm(Korund)<br />-Höhenverstellung über Handrad<br />-Feinzustellung über Handrad<br />-Antriebsleistung ca. 3KW<br />-Kühlmitteleinrichtung<br />-Maschinenumhausung<br />-Dokumentation<br /><br />Abmaße:<br />LxBxH 1,1x0,8x1,8Meter /Gewicht 750Kg

Metos Proveno CoolPro 80E combi kettle, Stainless, 80L, combi kettle, jacketed, 20.75Kw, temp range from 0'C to 120'C, with variable speed agitation, adjustable timer and temperature settings and more, with manual, 3Ph

Groen DH/1-40 Boiling pan kettle, Serial: 77863, Stainless tipping kettle, jacketed, Natural gas, Heat input 24.5Kw, with lid, 1Ph

Cutting length: 3100 mm
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Cutting angle: 1 °
Back gauge: 750 mm
Motor power: 7 kW
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg

Saw frame: Pivot frame
Band dimensions: 3660x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 320x300 mm
Working height: 640 mm
Hydraulic motor: 0.37 kW
Motor: 2 kW
Coolant pump motor: 0.12 kW
Length: 1900 mm
Width: 850 mm
Height: 1300 mm
Weight: 770 kg

Bending length: 2550 mm
Max. bending capacity - mild steel: 15
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 4760 mm
Width: 1660 mm
Height: 1155 mm
Weight: 8950 kg

Ref. no.: 17146
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm

Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar

Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg

Linde Cryoline MT1250 Freezing tunnel, Serial: 5-199, 2016, Linde CRYOLINE MT 1250 Cryogen/Nitrogen Tunnel Freezer, a top-of-the-line freezing solution for your industrial needs. This machine boasts a cooling capacity of 100 kW/29.41 tons, ensuring efficient and rapid freezing of your products. The fully stainless steel construction, including a fine stainless steel mesh belt, guarantees durability and hygiene compliance. With a net belt width of 1250 mm and a freezing belt length of 4000 mm, this freezer can accommodate a wide range of products with a maximum height of 100 mm. Equipped with 6 internal high-speed fans that are adjustable, you have full control over the freezing process. The holding time can be set between 0.5 and 20 minutes, providing flexibility based on your specific requirements. The stainless steel switch-board cabinet features a Siemens PLC and HMI Simatic touchscreen for easy operation and monitoring. This Cryoline MT 1250 Cooling Tunnel, manufactured in 2016, o

pressing capacity: 40 to
Stroke: 500 mm
Ram: 700x350 mm
Table: 700x500 mm
Daylight: 500 mm
Throat depth: 250 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1500 mm
Width: 1000 mm
Height: 2500 mm
Weight: 1500 kg

Bending length: 3100 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 360 mm
Lower roll diameter: 360 mm
Lateral roll diameter: 270 mm
Max. opening: 60 mm
Working height: 1510 mm
Motor power: 22 kW
Length: 5560 mm
Width: 2060 mm
Height: 2050 mm
Weight: 16750 kg

Bending length: 3100 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 300 mm
Lower roll diameter: 300 mm
Lateral roll diameter: 240 mm
Max. opening: 50 mm
Working height: 1140 mm
Motor power: 18.5 kW
Length: 5310 mm
Width: 1660 mm
Height: 1140 mm
Weight: 11100 kg

Bending length: 3100 mm
Max. bending capacity - mild steel: 13
Max. plate thickness without prebending - mild steel: 12 mm
Max. plate thickness with prebending - mild steel: 8 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 5310 mm
Width: 1660 mm
Height: 1590 mm
Weight: 10050 kg

Bending length: 3100 mm
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 240 mm
Lower roll diameter: 240 mm
Lateral roll diameter: 190 mm
Working height: 825 mm
Motor power: 11 kW
Length: 4880 mm
Width: 1160 mm
Height: 1200 mm
Weight: 6450 kg

Bending length: 2030 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 5 mm
Upper roll diameter: 170 mm
Motor power: 4 kW
Length: 3600 mm
Width: 1020 mm
Height: 1120 mm
Weight: 2400 kg

Bending length: 1530 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 4 mm
Upper roll diameter: 150 mm
Motor power: 4 kW
Length: 3100 mm
Width: 1120 mm
Height: 1020 mm
Weight: 2100 kg

Bending length: 2050 mm
Max. bending capacity - mild steel: 30
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5000 mm
Width: 2000 mm
Height: 1900 mm
Weight: 11000 kg

Bending length: 2550 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5500 mm
Width: 2000 mm
Height: 1900 mm
Weight: 13000 kg

Bending length: 3100 mm
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 6000 mm
Width: 2200 mm
Height: 1900 mm
Weight: 15000 kg

Bending length: 2050 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1550 mm
Weight: 6100 kg

Bending length: 2050 mm
Max. bending capacity - mild steel: 13
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1470 mm
Weight: 5450 kg

Bending length: 3100 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1550 mm
Weight: 7685 kg

Bending length: 2550 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4800 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6170 kg

Bending length: 2050 mm
Max. bending capacity - mild steel: 11
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 9 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 9 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Upper roll diameter: 220 mm
Lower roll diameter: 220 mm
Lateral roll diameter: 160 mm
Bending speed: 1,5-6 m/min
Motor power: 5.5 kW
Length: 4400 mm
Width: 1150 mm
Height: 1250 mm
Weight: 4080 kg

Bending length: 3100 mm
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6850 kg

Bending length: 2550 mm
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 220 mm
Lower roll diameter: 220 mm
Lateral roll diameter: 160 mm
Bending speed: 1,5-6 m/min
Motor power: 5.5 kW
Length: 4900 mm
Width: 1150 mm
Height: 1250 mm
Weight: 4600 kg

Bending length: 1550 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg