2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg
2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 4100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 350 mm
Strokes: 8 1/min
Cutting angle: 1.75 °
Number of downholders: 18 pcs.
Pressure of downholder: 62 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 3 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 4520 mm
Length: 5350 mm
Width: 2250 mm
Total width with support arm und protection fence: 3650 mm
Height: 2250 mm
Weight: 16300 kg
Cutting length: 4100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 350 mm
Strokes: 8 1/min
Cutting angle: 1.75 °
Number of downholders: 18 pcs.
Pressure of downholder: 62 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 3 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 4520 mm
Length: 5350 mm
Width: 2250 mm
Total width with support arm und protection fence: 3650 mm
Height: 2250 mm
Weight: 16300 kg
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 350 mm
Strokes: 8 1/min
Cutting angle: 1.75 °
Number of downholders: 18 pcs.
Pressure of downholder: 62 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 3 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 4520 mm
Length: 5350 mm
Width: 2250 mm
Total width with support arm und protection fence: 3650 mm
Height: 2250 mm
Weight: 16300 kg
2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg
2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg
2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 4100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 12 1/min
Cutting angle: 1.5 °
Number of downholders: 20 pcs.
Pressure of downholder: 17 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 3 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 4510 mm
Length: 5230 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2150 mm
Weight: 11460 kg
Cutting length: 4100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 12 1/min
Cutting angle: 1.5 °
Number of downholders: 20 pcs.
Pressure of downholder: 17 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 3 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 4510 mm
Length: 5230 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2150 mm
Weight: 11460 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 12 1/min
Cutting angle: 1.5 °
Number of downholders: 20 pcs.
Pressure of downholder: 17 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 3 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 4510 mm
Length: 5230 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2150 mm
Weight: 11460 kg
6
Metal working and machine toolsSheet metal working machinesBeading machines
Max. thickness - mild steel: 4 mm
Throat depth: 200 mm
Shaft length: 300 mm
Tools: 4 pcs.
Rolls diameter: 126 mm
Motor: 2.2 kW
Revs: 10 1/min
Length: 1475 mm
Width: 550 mm
Height: 1200 mm
Weight: 460 kg
Max. thickness - mild steel: 4 mm
Throat depth: 200 mm
Shaft length: 300 mm
Tools: 4 pcs.
Rolls diameter: 126 mm
Motor: 2.2 kW
Revs: 10 1/min
Length: 1475 mm
Width: 550 mm
Height: 1200 mm
Weight: 460 kg
Throat depth: 200 mm
Shaft length: 300 mm
Tools: 4 pcs.
Rolls diameter: 126 mm
Motor: 2.2 kW
Revs: 10 1/min
Length: 1475 mm
Width: 550 mm
Height: 1200 mm
Weight: 460 kg
4
Metal working and machine toolsSheet metal working machinesBeading machines
Max. thickness - mild steel: 2.5 mm
Throat depth: 160 mm
Shaft length: 250 mm
Tools: 4 pcs.
Rolls diameter: 96 mm
Motor: 1.5 kW
Revs: 13 1/min
Length: 1475 mm
Width: 550 mm
Height: 1200 mm
Weight: 320 kg
Max. thickness - mild steel: 2.5 mm
Throat depth: 160 mm
Shaft length: 250 mm
Tools: 4 pcs.
Rolls diameter: 96 mm
Motor: 1.5 kW
Revs: 13 1/min
Length: 1475 mm
Width: 550 mm
Height: 1200 mm
Weight: 320 kg
Throat depth: 160 mm
Shaft length: 250 mm
Tools: 4 pcs.
Rolls diameter: 96 mm
Motor: 1.5 kW
Revs: 13 1/min
Length: 1475 mm
Width: 550 mm
Height: 1200 mm
Weight: 320 kg
2
Metal working and machine toolsSheet metal working machinesBeading machines
Max. thickness - mild steel: 1.2 mm
Throat depth: 100 mm
Shaft length: 140 mm
Tools: 7 pcs.
Rolls diameter: 62 mm
Length: 560 mm
Width: 220 mm
Height: 500 mm
Weight: 50 kg
Max. thickness - mild steel: 1.2 mm
Throat depth: 100 mm
Shaft length: 140 mm
Tools: 7 pcs.
Rolls diameter: 62 mm
Length: 560 mm
Width: 220 mm
Height: 500 mm
Weight: 50 kg
Throat depth: 100 mm
Shaft length: 140 mm
Tools: 7 pcs.
Rolls diameter: 62 mm
Length: 560 mm
Width: 220 mm
Height: 500 mm
Weight: 50 kg
5
Metal working and machine toolsSheet metal working machinesPlasma cutting machines
Working area: 1500x3000 mm
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: 1/10 mm
Volume water tray:: 630 lt
Max. weight on table: 400 kg/m²
Length: 3560 mm
Width: 1960 mm
Height: 1500 mm
Weight: 650 kg
Working area: 1500x3000 mm
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: 1/10 mm
Volume water tray:: 630 lt
Max. weight on table: 400 kg/m²
Length: 3560 mm
Width: 1960 mm
Height: 1500 mm
Weight: 650 kg
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: 1/10 mm
Volume water tray:: 630 lt
Max. weight on table: 400 kg/m²
Length: 3560 mm
Width: 1960 mm
Height: 1500 mm
Weight: 650 kg
5
Metal working and machine toolsSheet metal working machinesPlasma cutting machines
Working area: 1250x2500 mm
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: 1/10 mm
Volume water tray:: 470 lt
Max. weight on table: 500 kg/m²
Length: 3060 mm
Width: 1760 mm
Height: 1500 mm
Weight: 500 kg
Working area: 1250x2500 mm
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: 1/10 mm
Volume water tray:: 470 lt
Max. weight on table: 500 kg/m²
Length: 3060 mm
Width: 1760 mm
Height: 1500 mm
Weight: 500 kg
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: 1/10 mm
Volume water tray:: 470 lt
Max. weight on table: 500 kg/m²
Length: 3060 mm
Width: 1760 mm
Height: 1500 mm
Weight: 500 kg
5
Metal working and machine toolsSheet metal working machinesPlasma cutting machines
Working area: 1000x2000 mm
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: unter 1/10 mm
Volume water tray:: 300 lt
Max. weight on table: 400 kg/m²
Length: 2560 mm
Width: 1460 mm
Height: 1500 mm
Weight: 400 kg
Working area: 1000x2000 mm
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: unter 1/10 mm
Volume water tray:: 300 lt
Max. weight on table: 400 kg/m²
Length: 2560 mm
Width: 1460 mm
Height: 1500 mm
Weight: 400 kg
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: unter 1/10 mm
Volume water tray:: 300 lt
Max. weight on table: 400 kg/m²
Length: 2560 mm
Width: 1460 mm
Height: 1500 mm
Weight: 400 kg
6
Metal working and machine toolsLathes
Swing over bed: 1020 mm
Distance between centers: 2000 mm
Centre height: 510 mm
Spindle bore: 358 mm
swing over cross slide: 770 mm
Width of bed: 560 mm
Spindle taper: 361 M
Spindle speed steps: 12
Spindle revs: 6,3 - 315 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 505 mm
Top slide travel: 270 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 18 kW
Weight: 6400 kg
Swing over bed: 1020 mm
Distance between centers: 2000 mm
Centre height: 510 mm
Spindle bore: 358 mm
swing over cross slide: 770 mm
Width of bed: 560 mm
Spindle taper: 361 M
Spindle speed steps: 12
Spindle revs: 6,3 - 315 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 505 mm
Top slide travel: 270 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 18 kW
Weight: 6400 kg
Distance between centers: 2000 mm
Centre height: 510 mm
Spindle bore: 358 mm
swing over cross slide: 770 mm
Width of bed: 560 mm
Spindle taper: 361 M
Spindle speed steps: 12
Spindle revs: 6,3 - 315 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 505 mm
Top slide travel: 270 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 18 kW
Weight: 6400 kg
5
Metal working and machine toolsLathes
Swing over bed: 800 mm
Distance between centers: 2000 mm
Centre height: 400 mm
Spindle bore: 260 mm
swing over cross slide: 560 mm
Width of bed: 560 mm
Spindle taper: 318 M
Spindle speed steps: 12
Spindle revs: 8 - 400 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Weight: 6000 kg
Swing over bed: 800 mm
Distance between centers: 2000 mm
Centre height: 400 mm
Spindle bore: 260 mm
swing over cross slide: 560 mm
Width of bed: 560 mm
Spindle taper: 318 M
Spindle speed steps: 12
Spindle revs: 8 - 400 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Weight: 6000 kg
Distance between centers: 2000 mm
Centre height: 400 mm
Spindle bore: 260 mm
swing over cross slide: 560 mm
Width of bed: 560 mm
Spindle taper: 318 M
Spindle speed steps: 12
Spindle revs: 8 - 400 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Weight: 6000 kg
5
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 150 to
Bending length: 1520 mm
Stroke: 300 mm
rapid speed Y-axis: 9 mm/s
Working speed Y-axis: 5
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
pressing capacity: 150 to
Bending length: 1520 mm
Stroke: 300 mm
rapid speed Y-axis: 9 mm/s
Working speed Y-axis: 5
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
Bending length: 1520 mm
Stroke: 300 mm
rapid speed Y-axis: 9 mm/s
Working speed Y-axis: 5
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
9
Printing machineryOther
Iram 16 paperdrill
4 drillhead
Iram 16 paperdrill
4 drillhead
4 drillhead
9
Metal working and machine toolsSawingBelt saws
Saw frame: Pivot frame
Band dimensions: 3160x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 270 mm
Cutting capacity 0° square: 270 mm
Cutting capacity 0° flat: 340 x 220 mm
Cutting capacity 45°: round 230 mm, square 200 mm, flat 220 x 200 mm
Cutting capacity 60°: round 150 mm, square 150 mm, flat 150 x 100 mm
Cutting capacity - 45°: round 180 mm, square 160 mm, flat 210 x 100 mm
Working height: 910 mm
Hydraulic motor: 0.37 kW
Motor: 1.5 kW
Coolant pump motor: 0.12 kW
Length: 1730 mm
Width: 770 mm
Height: 1460 mm
Weight: 476 kg
Saw frame: Pivot frame
Band dimensions: 3160x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 270 mm
Cutting capacity 0° square: 270 mm
Cutting capacity 0° flat: 340 x 220 mm
Cutting capacity 45°: round 230 mm, square 200 mm, flat 220 x 200 mm
Cutting capacity 60°: round 150 mm, square 150 mm, flat 150 x 100 mm
Cutting capacity - 45°: round 180 mm, square 160 mm, flat 210 x 100 mm
Working height: 910 mm
Hydraulic motor: 0.37 kW
Motor: 1.5 kW
Coolant pump motor: 0.12 kW
Length: 1730 mm
Width: 770 mm
Height: 1460 mm
Weight: 476 kg
Band dimensions: 3160x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 270 mm
Cutting capacity 0° square: 270 mm
Cutting capacity 0° flat: 340 x 220 mm
Cutting capacity 45°: round 230 mm, square 200 mm, flat 220 x 200 mm
Cutting capacity 60°: round 150 mm, square 150 mm, flat 150 x 100 mm
Cutting capacity - 45°: round 180 mm, square 160 mm, flat 210 x 100 mm
Working height: 910 mm
Hydraulic motor: 0.37 kW
Motor: 1.5 kW
Coolant pump motor: 0.12 kW
Length: 1730 mm
Width: 770 mm
Height: 1460 mm
Weight: 476 kg
_thumb.jpeg "Show advert")
13
Printing machineryOther
Bobst domino 100- m Folder gluer Bobst.
folding gluing machine
Maximum open blank width: 1000 mm, Straight Line
4 HSS gluing guns
No gluing Disk
Bobst domino 100- m Folder gluer Bobst.
folding gluing machine
Maximum open blank width: 1000 mm, Straight Line
4 HSS gluing guns
No gluing Disk
folding gluing machine
Maximum open blank width: 1000 mm, Straight Line
4 HSS gluing guns
No gluing Disk
5
Metal working and machine toolsLathes
Swing over bed: 800 mm
Distance between centers: 2000 mm
Centre height: 400 mm
Spindle bore: 315 mm
swing over cross slide: 560 mm
Width of bed: 560 mm
Spindle taper: 318 M
Spindle speed steps: 12
Spindle revs: 8 - 400 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Weight: 6100 kg
Swing over bed: 800 mm
Distance between centers: 2000 mm
Centre height: 400 mm
Spindle bore: 315 mm
swing over cross slide: 560 mm
Width of bed: 560 mm
Spindle taper: 318 M
Spindle speed steps: 12
Spindle revs: 8 - 400 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Weight: 6100 kg
Distance between centers: 2000 mm
Centre height: 400 mm
Spindle bore: 315 mm
swing over cross slide: 560 mm
Width of bed: 560 mm
Spindle taper: 318 M
Spindle speed steps: 12
Spindle revs: 8 - 400 rpm
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Weight: 6100 kg
6
Printing machineryCutting machines
Polar 78 E papercutter
Complete with tools
Polar 78 E papercutter
Complete with tools
Complete with tools
10
Metal working and machine toolsLathesCenter lathes and spindle lathes
WEILER COMMODOR L&Z Spindeldrehmaschine-Drehlänge 1000mm-Drehdurchmesser max. 160mmStangendurchlass 56mm-Drehzahlbereich 25-2000 U/min-Automatische Längs / Planvorschübe-Gewinde Metrisch / Zoll /usw.-Reitstock Mk4-Dreibackenfutter ca. 250mm-Multifixgrundhalter mit Einsatz-Kühlmitteleinrichtung-Elektrischer Futterschutz-Spänerückwand-Maschinendokumentation-Guter betriebsbereiter ZustandAbmaße:GpdpzgLxBxH 2,5x1,3x1,7 Meter / Gewicht 1500Kg
WEILER COMMODOR L&Z Spindeldrehmaschine
-Drehlänge 1000mm
-Drehdurchmesser max. 160mm
Stangendurchlass 56mm
-Drehzahlbereich 25-2000 U/min
-Automatische Längs / Planvorschübe
-Gewinde Metrisch / Zoll /usw.
-Reitstock Mk4
-Dreibackenfutter ca. 250mm
-Multifixgrundhalter mit Einsatz
-Kühlmitteleinrichtung
-Elektrischer Futterschutz
-Spänerückwand
-Maschinendokumentation
-Guter betriebsbereiter Zustand
Abmaße:
Gpdpzg
LxBxH 2,5x1,3x1,7 Meter / Gewicht 1500Kg
-Drehlänge 1000mm
-Drehdurchmesser max. 160mm
Stangendurchlass 56mm
-Drehzahlbereich 25-2000 U/min
-Automatische Längs / Planvorschübe
-Gewinde Metrisch / Zoll /usw.
-Reitstock Mk4
-Dreibackenfutter ca. 250mm
-Multifixgrundhalter mit Einsatz
-Kühlmitteleinrichtung
-Elektrischer Futterschutz
-Spänerückwand
-Maschinendokumentation
-Guter betriebsbereiter Zustand
Abmaße:
Gpdpzg
LxBxH 2,5x1,3x1,7 Meter / Gewicht 1500Kg
8
Metal working and machine toolsSanding machinesSurface grinding machines
Grinding length: 1500 mm
Grinding width: 600 mm
Grinding hight: 400 mm
Table load: 950 kg
Table size: 1900 x 550 mm
Magnetic table: 1500 x 600 mm
Grinding wheel dimensions: 400 x 100 x 127 mm
Spindle speed: 1000 - 3450 rpm
Spindle drive: 10 - 34 kW
Weight of machine: 6.700 kg
Travel distances 1575 x 560, overhauled by Wema Service in 2012
Accessory: balancing device, 4 grinding wheels, 2 holders
Grinding length: 1500 mm
Grinding width: 600 mm
Grinding hight: 400 mm
Table load: 950 kg
Table size: 1900 x 550 mm
Magnetic table: 1500 x 600 mm
Grinding wheel dimensions: 400 x 100 x 127 mm
Spindle speed: 1000 - 3450 rpm
Spindle drive: 10 - 34 kW
Weight of machine: 6.700 kg
Travel distances 1575 x 560, overhauled by Wema Service in 2012
Accessory: balancing device, 4 grinding wheels, 2 holders
Grinding width: 600 mm
Grinding hight: 400 mm
Table load: 950 kg
Table size: 1900 x 550 mm
Magnetic table: 1500 x 600 mm
Grinding wheel dimensions: 400 x 100 x 127 mm
Spindle speed: 1000 - 3450 rpm
Spindle drive: 10 - 34 kW
Weight of machine: 6.700 kg
Travel distances 1575 x 560, overhauled by Wema Service in 2012
Accessory: balancing device, 4 grinding wheels, 2 holders
8
Metal working and machine toolsSanding machinesSurface grinding machines
Grinding length: 600 mm
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg
little used, from a workshop for the disabled, travel distances 750 x 350
Accessory: balancing device, 1 grinding wheel, 2 holders
Grinding length: 600 mm
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg
little used, from a workshop for the disabled, travel distances 750 x 350
Accessory: balancing device, 1 grinding wheel, 2 holders
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg
little used, from a workshop for the disabled, travel distances 750 x 350
Accessory: balancing device, 1 grinding wheel, 2 holders
10
Metal working and machine toolsLathesCNC lathes
Drehdurchmesser: . mmDrehlänge: . mmSteuerung: Fanuc MonfortsSpindeldurchlass: . mmDrehzahl: U/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser: . mm
Drehlänge: . mm
Steuerung: Fanuc Monforts
Spindeldurchlass: . mm
Drehzahl: U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Drehlänge: . mm
Steuerung: Fanuc Monforts
Spindeldurchlass: . mm
Drehzahl: U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
6
Food machinesBakery-, pastry equipmentCutting machines
Hubert Cloix PC120FA Pastocooker, Serial: 1464, 2012, Stainless, 120L Pastocooker, with agitation and scrape surface, refrigerated water cooling, temperature control, previously used for custard, cream, and other cake products, mobile, 3Ph
Hubert Cloix PC120FA Pastocooker, Serial: 1464, 2012, Stainless, 120L Pastocooker, with agitation and scrape surface, refrigerated water cooling, temperature control, previously used for custard, cream, and other cake products, mobile, 3Ph
7
Food machinesBakery-, pastry equipmentCutting machines
Hubert Cloix PC60FA Pastocooker, Serial: 1053, 2012, Stainless, 60L Pastocooker, with agitation and scrape surface, refrigerated air cooling, temperature control, previously used for custard, cream, and other cake products, mobile, 3Ph
Hubert Cloix PC60FA Pastocooker, Serial: 1053, 2012, Stainless, 60L Pastocooker, with agitation and scrape surface, refrigerated air cooling, temperature control, previously used for custard, cream, and other cake products, mobile, 3Ph
7
Food machinesConfectionery production
Chocolate tanks chocolate kettle 200l chocolate kettle, stainless bowl and agitator, digital temp control, side bottom discharge, 3Ph
Chocolate tanks chocolate kettle 200l chocolate kettle, stainless bowl and agitator, digital temp control, side bottom discharge, 3Ph
4
Food machinesOther
Cox and plant Vibratory conveyor, Stainless, conveyor dimensions 1600mm x 350mm, adjustable vibration control, 1Ph
Cox and plant Vibratory conveyor, Stainless, conveyor dimensions 1600mm x 350mm, adjustable vibration control, 1Ph
14
Food machinesOther
Ambit Cook and quench system, Wash Cook and Quench system, 2017, Stainless, Four tank washing line with cook and quench system, previously used for cooking 500Kg Chickpeas per batch, consists of four washing tanks, elevator conveyor, cook and quench system, discharge table, 3Ph
Ambit Cook and quench system, Wash Cook and Quench system, 2017, Stainless, Four tank washing line with cook and quench system, previously used for cooking 500Kg Chickpeas per batch, consists of four washing tanks, elevator conveyor, cook and quench system, discharge table, 3Ph
5
Food machinesAccessories and spare parts
Videojet VJ9950 Thermal print and apply machine. The 9550 is a smarter print and apply labeler, direct apply label placement, up to 150 packs per min, 1Ph
Videojet VJ9950 Thermal print and apply machine. The 9550 is a smarter print and apply labeler, direct apply label placement, up to 150 packs per min, 1Ph
3
Food machinesMeat processing
Protech three station sinks, Stainless, wall mounted sinks, knee operated, three available
Protech three station sinks, Stainless, wall mounted sinks, knee operated, three available
4
Food machinesMeat processing
NNP Stainless boot rack, Stainless boot rack station, 24 pairs per rack, two racks available, mobile
NNP Stainless boot rack, Stainless boot rack station, 24 pairs per rack, two racks available, mobile
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
8
Packaging machineryPacking machinesPackaging systems
Hugo beck flexo 500S line
Hugo beck flexo 500S line
7
Food machinesAccessories and spare parts
Easiweigh Ace 2V Linear weigher, Serial: 991278, Stainless, single head linear weigher, with foot pedal, 1Ph
Easiweigh Ace 2V Linear weigher, Serial: 991278, Stainless, single head linear weigher, with foot pedal, 1Ph
4
Food machinesPackaging machinery
Thimonnier PC30 BI-active heat sealing tong, Welds all types of laminate materials, sealing bar 300mm, sealing width 12mm, adjustable temp control, 1Ph
Thimonnier PC30 BI-active heat sealing tong, Welds all types of laminate materials, sealing bar 300mm, sealing width 12mm, adjustable temp control, 1Ph
5
Food machinesMeat processing
Alfa Laval TS6MFG Plate heat exchanger, Serial: 30107, 2011, see plate for full spec
Alfa Laval TS6MFG Plate heat exchanger, Serial: 30107, 2011, see plate for full spec
6
Food machinesMeat processing
Sondex S22FG10 Plate heat exchanger, Serial: DIR67234, 2015, stainless plate heat exchanger, normal capacity 600Kw, Max temp 100'C see plate for all spec
Sondex S22FG10 Plate heat exchanger, Serial: DIR67234, 2015, stainless plate heat exchanger, normal capacity 600Kw, Max temp 100'C see plate for all spec
5
Food machinesAccessories and spare parts
Jungheinrich EJCM10 Electric pallet truck, Serial: F5004035, 2022, electric pallet truck, max lift height 1540mm, length of forks 1150mm, mobile, 1Ph to charge
Jungheinrich EJCM10 Electric pallet truck, Serial: F5004035, 2022, electric pallet truck, max lift height 1540mm, length of forks 1150mm, mobile, 1Ph to charge
5
Food machinesCooling technologyRefrigerators
Univap TCM/E 5ED Evaporator with electric defrost unit, 2021 Evaporator with electric defrost unit, comes with controls and external KD external fridge plant
Univap TCM/E 5ED Evaporator with electric defrost unit, 2021 Evaporator with electric defrost unit, comes with controls and external KD external fridge plant
7
Food machinesBeverage productionPumps
Flowtech Flowboost 2V JH1 water pump system with tanks, 2023, Two station pump unit with flow meters, 0.9Kw rating per pump
Flowtech Flowboost 2V JH1 water pump system with tanks, 2023, Two station pump unit with flow meters, 0.9Kw rating per pump
3
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
5
Food machinesAccessories and spare parts
Anritsu SV Checkweigher, 2007, Stainless checkweigher, belt dimensions 900mm x 250mm, checkweigher platform 220mm x 250mm, from 12g - 3000g, 1Ph
Anritsu SV Checkweigher, 2007, Stainless checkweigher, belt dimensions 900mm x 250mm, checkweigher platform 220mm x 250mm, from 12g - 3000g, 1Ph
5
Food machinesAccessories and spare parts
Hovmand Inox 200M3 Lifter, 2015, stainless lifter, previously used for lifting and tipping a bowl, control pad, mobile, 1Ph
Hovmand Inox 200M3 Lifter, 2015, stainless lifter, previously used for lifting and tipping a bowl, control pad, mobile, 1Ph
4
Food machinesOther
Stainless conveyor, Stainless conveyor, belt dimensions 2500mm x 280mm, elevates from 300mm to 1200mm, mobile
Stainless conveyor, Stainless conveyor, belt dimensions 2500mm x 280mm, elevates from 300mm to 1200mm, mobile
8
Packaging machineryPacking machines
Operating pressure: max. 12.000 bar
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m
The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.
Operating pressure: max. 12.000 bar
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m
The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m
The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.
13
Plastic processing machinesInjection molding machines
Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
1
Metal working and machine toolsSheet metal working machinesCircular shears
Max. thickness - mild steel: 2 mm
Throat depth: 700 mm
Motor: 1 kW
Speed: 7 m/min
min / max diameter: 120 / 1.000 mm
gap on blade side: 280 mm
Length: 1400 mm
Width: 400 mm
Height: 1150 mm
Weight: 360 kg
Max. thickness - mild steel: 2 mm
Throat depth: 700 mm
Motor: 1 kW
Speed: 7 m/min
min / max diameter: 120 / 1.000 mm
gap on blade side: 280 mm
Length: 1400 mm
Width: 400 mm
Height: 1150 mm
Weight: 360 kg
Throat depth: 700 mm
Motor: 1 kW
Speed: 7 m/min
min / max diameter: 120 / 1.000 mm
gap on blade side: 280 mm
Length: 1400 mm
Width: 400 mm
Height: 1150 mm
Weight: 360 kg
5
Metal working and machine toolsLathesLathes
Drehdurchmesser: 1020 mmDrehlänge: 4000 mmDrehdurchmesser über Support: 720 mmSteuerung: SiemensTyp: 805Reitstock-Pinolenaufnahme MK: 6Getriebestufen: 2Drehzahl: U/minBettbreite: 560 mmSpindelbohrung: 200 mmWerkstückgewicht: kgPlanscheibe: 1000 mmFabrikat: Forkhardt PSA 1000Dreibackenfutter Forckrath: 500 mmLünette: 500 mmGesamtleistungsbedarf: KVAMaschinengewicht ca.: tRaumbedarf ca.: 7,4x2,5x2,5 m
Drehdurchmesser: 1020 mm
Drehlänge: 4000 mm
Drehdurchmesser über Support: 720 mm
Steuerung: Siemens
Typ: 805
Reitstock-Pinolenaufnahme MK: 6
Getriebestufen: 2
Drehzahl: U/min
Bettbreite: 560 mm
Spindelbohrung: 200 mm
Werkstückgewicht: kg
Planscheibe: 1000 mm
Fabrikat: Forkhardt PSA 1000
Dreibackenfutter Forckrath: 500 mm
Lünette: 500 mm
Gesamtleistungsbedarf: KVA
Maschinengewicht ca.: t
Raumbedarf ca.: 7,4x2,5x2,5 m
Drehlänge: 4000 mm
Drehdurchmesser über Support: 720 mm
Steuerung: Siemens
Typ: 805
Reitstock-Pinolenaufnahme MK: 6
Getriebestufen: 2
Drehzahl: U/min
Bettbreite: 560 mm
Spindelbohrung: 200 mm
Werkstückgewicht: kg
Planscheibe: 1000 mm
Fabrikat: Forkhardt PSA 1000
Dreibackenfutter Forckrath: 500 mm
Lünette: 500 mm
Gesamtleistungsbedarf: KVA
Maschinengewicht ca.: t
Raumbedarf ca.: 7,4x2,5x2,5 m
2
Metal working and machine toolsSheet metal working machines
pressing capacity: 300 to
Stroke: 500 mm
Ram: 1000x500 mm
Table: 1200x800 mm
Daylight: 600 mm
Throat depth: 400 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3100 mm
Weight: 11200 kg
pressing capacity: 300 to
Stroke: 500 mm
Ram: 1000x500 mm
Table: 1200x800 mm
Daylight: 600 mm
Throat depth: 400 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3100 mm
Weight: 11200 kg
Stroke: 500 mm
Ram: 1000x500 mm
Table: 1200x800 mm
Daylight: 600 mm
Throat depth: 400 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3100 mm
Weight: 11200 kg
2
Metal working and machine toolsSheet metal working machines
pressing capacity: 200 to
Stroke: 500 mm
Ram: 870x500 mm
Table: 1000x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 21 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3000 mm
Weight: 8200 kg
pressing capacity: 200 to
Stroke: 500 mm
Ram: 870x500 mm
Table: 1000x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 21 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3000 mm
Weight: 8200 kg
Stroke: 500 mm
Ram: 870x500 mm
Table: 1000x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 21 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3000 mm
Weight: 8200 kg
2
Metal working and machine toolsSheet metal working machines
pressing capacity: 150 to
Stroke: 500 mm
Ram: 800x400 mm
Table: 900x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 2200 mm
Width: 1500 mm
Height: 3000 mm
Weight: 5500 kg
pressing capacity: 150 to
Stroke: 500 mm
Ram: 800x400 mm
Table: 900x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 2200 mm
Width: 1500 mm
Height: 3000 mm
Weight: 5500 kg
Stroke: 500 mm
Ram: 800x400 mm
Table: 900x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 2200 mm
Width: 1500 mm
Height: 3000 mm
Weight: 5500 kg