8
Metal working and machine toolsSawing
Cutting diameter: 100 mm
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
Cutting diameter: 100 mm
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
4
Packaging machineryPacking machines
Vibration monitoring: yes
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
Vibration monitoring: yes
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
5
Metal working and machine toolsMilling machinesOther
X: 500 mm
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
X: 500 mm
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
7
Packaging machineryPacking machines
Weight of machine: 7 kg
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
Weight of machine: 7 kg
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
12
Metal working and machine toolsDrilling machines and boring millsTapping machines
Table size: 260 x 290 mm
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
Table size: 260 x 290 mm
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
4
Packaging machineryPacking machines
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
3
Packaging machineryPacking machines
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
6
Metal working and machine toolsSheet metal working machinesPunching machines
Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
4
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
5
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
5
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
10
Metal working and machine toolsCutting machines and equipmentLaser cutting machines
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect
Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1
Accessory: cooling unit
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect
Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1
Accessory: cooling unit
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect
Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1
Accessory: cooling unit
4
Packaging machineryPacking machines
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
6
Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
5
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
5
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
1
Solar module Maysun Solar, MSE-07 370 Wp - full black, mono PU module, 1755 mm x 1038 mm x 30 mm, length of connection cable 110 cm, collection only
Solar module Maysun Solar, MSE-07 370 Wp - full black, mono PU module, 1755 mm x 1038 mm x 30 mm, length of connection cable 110 cm, collection only
11
Metal working and machine toolsMilling machinesOther
X: 560 mm
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good
less operating hours, can be inspected under power
Accessory: complete documentation
X: 560 mm
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good
less operating hours, can be inspected under power
Accessory: complete documentation
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good
less operating hours, can be inspected under power
Accessory: complete documentation
10
Metal working and machine toolsWelding machinesOther
Max. welding current: 200 A
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
Max. welding current: 200 A
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
8
Metal working and machine toolsDrilling machines and boring mills
Mounting table: 300 x 400 mm
Quill ram: 120 mm
Speed range: 5800 rpm
Gearbox stages: 2
Feed: 0,001 - 3,5 m/min
Rapid: 3,5 m/min
Taper fixture: MK 3
Drilling performance: 25 mm
Thread cutting device: with foot switch
Coolant system: yes
Total power: 1,5 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,66 x 0,44 x 1,95 m
Condition: very good
High-performance drilling machine, machine number 511
Accessory: documentation, coolant equipment
Mounting table: 300 x 400 mm
Quill ram: 120 mm
Speed range: 5800 rpm
Gearbox stages: 2
Feed: 0,001 - 3,5 m/min
Rapid: 3,5 m/min
Taper fixture: MK 3
Drilling performance: 25 mm
Thread cutting device: with foot switch
Coolant system: yes
Total power: 1,5 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,66 x 0,44 x 1,95 m
Condition: very good
High-performance drilling machine, machine number 511
Accessory: documentation, coolant equipment
Quill ram: 120 mm
Speed range: 5800 rpm
Gearbox stages: 2
Feed: 0,001 - 3,5 m/min
Rapid: 3,5 m/min
Taper fixture: MK 3
Drilling performance: 25 mm
Thread cutting device: with foot switch
Coolant system: yes
Total power: 1,5 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,66 x 0,44 x 1,95 m
Condition: very good
High-performance drilling machine, machine number 511
Accessory: documentation, coolant equipment
9
Metal working and machine toolsWelding machinesRobots
Load capacity: 16 kg
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
Load capacity: 16 kg
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
14
Metal working and machine toolsMilling machines
X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
14
Metal working and machine toolsMilling machinesOther
X: 1050 mm
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
X: 1050 mm
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
12
Woodworking machinerySawingBelt saws
Cutting diameter: 400 mm
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 saw blades, documentation
Cutting diameter: 400 mm
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 saw blades, documentation
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 saw blades, documentation
13
Metal working and machine toolsSurface finishing
Ultrasonic power: 8,4 kW
Component weight max.: 5000 kg
Volume: 2000 ltr
Heating capacity: 51 kW
Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm
Space requirement (W x D x H): 12 x 3,2 x 2,1 m
Total power: 60 kW
Condition: very good
mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use
Ultrasonic power: 8,4 kW
Component weight max.: 5000 kg
Volume: 2000 ltr
Heating capacity: 51 kW
Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm
Space requirement (W x D x H): 12 x 3,2 x 2,1 m
Total power: 60 kW
Condition: very good
mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use
Component weight max.: 5000 kg
Volume: 2000 ltr
Heating capacity: 51 kW
Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm
Space requirement (W x D x H): 12 x 3,2 x 2,1 m
Total power: 60 kW
Condition: very good
mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use
11
Food machinesPackaging machinery
Flexipak rotary pot sealer, 2013, stainless rotary pot sealer, twin station sealer, previously used to seal a 60mm diameter pot, also comes with plate for an 80mm square pot, adjustable temp controls, with foot pedal, 1Ph
Flexipak rotary pot sealer, 2013, stainless rotary pot sealer, twin station sealer, previously used to seal a 60mm diameter pot, also comes with plate for an 80mm square pot, adjustable temp controls, with foot pedal, 1Ph
11
Plastic processing machinesCalender
Walzenbreite: 450 mmWalzendurchmesser - oben: 203 mmWalzendurchmesser - unten: 203 mmLeistung: 8,8 kw
Walzenbreite: 450 mm
Walzendurchmesser - oben: 203 mm
Walzendurchmesser - unten: 203 mm
Leistung: 8,8 kw
Walzendurchmesser - oben: 203 mm
Walzendurchmesser - unten: 203 mm
Leistung: 8,8 kw
10
Plastic processing machinesPresses
Druck: 650 tDurchgangsbreite: 920 mmHub: 1500 mmTischfläche: 2000x1500 mmStößelfläche: 2000x1500 mmEinbauhöhe: 2100 mmHydraulik: 250 barSchließgeschwindigkeit: 500 mm/secPreßgeschwindigkeit: 0,5-10,4 mm/secLoch im Stößel Durchmesser/Tiefe: mmÖffnungsgeschwindigkeit: 250 mm/250Gesamtleistungsbedarf: kWMaschinengewicht ca.: 47 tRaumbedarf ca.: m
Druck: 650 t
Durchgangsbreite: 920 mm
Hub: 1500 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 250 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: m
Durchgangsbreite: 920 mm
Hub: 1500 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 250 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: m
7
Metal working and machine toolsFlow forming machines
Arbeitsbereich: 12-60 mmGeschwindigkeit: 60/120 m/minStangenlängen: 4000 mmVorschub: 0-5 mm/UWalzkraft: 500-40000 NGewicht: 1200 kgGesamtleistungsbedarf: 3 kW
Arbeitsbereich: 12-60 mm
Geschwindigkeit: 60/120 m/min
Stangenlängen: 4000 mm
Vorschub: 0-5 mm/U
Walzkraft: 500-40000 N
Gewicht: 1200 kg
Gesamtleistungsbedarf: 3 kW
Geschwindigkeit: 60/120 m/min
Stangenlängen: 4000 mm
Vorschub: 0-5 mm/U
Walzkraft: 500-40000 N
Gewicht: 1200 kg
Gesamtleistungsbedarf: 3 kW
3
Metal working and machine toolsOther
Tischdurchmesser: 900 mmTischbelastung: 3000 kgEinbauhöhe: 580Hub: 95-800 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 8 tRaumbedarf ca.: m
Tischdurchmesser: 900 mm
Tischbelastung: 3000 kg
Einbauhöhe: 580
Hub: 95-800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 8 t
Raumbedarf ca.: m
Tischbelastung: 3000 kg
Einbauhöhe: 580
Hub: 95-800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 8 t
Raumbedarf ca.: m
10
Metal working and machine toolsMeasuring machinesPre-setting tools
Länge: 800 mmMessbereich X-Achse: 520 mmTischgröße: 700 mmGewicht: 900 kg
Länge: 800 mm
Messbereich X-Achse: 520 mm
Tischgröße: 700 mm
Gewicht: 900 kg
Messbereich X-Achse: 520 mm
Tischgröße: 700 mm
Gewicht: 900 kg
10
Metal working and machine toolsGear cutting machinesGear grinding machines
Raddurchmesser - max.: 1500 mmRadbreite: 550 mmModul - max.: 25Modul - min.: 2Werkstückgewicht max.: 6000 kgZähnezahl - max.: 432Zähnezahl - min.: 12Tischdurchmesser: 990 mmSchleifscheibe Abmessung: 400 mmGesamtleistungsbedarf: 75 kWMaschinengewicht ca.: 20,5 tRaumbedarf ca.: m
Raddurchmesser - max.: 1500 mm
Radbreite: 550 mm
Modul - max.: 25
Modul - min.: 2
Werkstückgewicht max.: 6000 kg
Zähnezahl - max.: 432
Zähnezahl - min.: 12
Tischdurchmesser: 990 mm
Schleifscheibe Abmessung: 400 mm
Gesamtleistungsbedarf: 75 kW
Maschinengewicht ca.: 20,5 t
Raumbedarf ca.: m
Radbreite: 550 mm
Modul - max.: 25
Modul - min.: 2
Werkstückgewicht max.: 6000 kg
Zähnezahl - max.: 432
Zähnezahl - min.: 12
Tischdurchmesser: 990 mm
Schleifscheibe Abmessung: 400 mm
Gesamtleistungsbedarf: 75 kW
Maschinengewicht ca.: 20,5 t
Raumbedarf ca.: m
3
Metal working and machine toolsGear cutting machinesGear milling machines
Raddurchmesser - max.: 2000 mmRadbreite: . mmModul - max.: 22größter Fräserdurchmesser: 250 mmFräserdrehzahlen: 16-92 U/minGesamtleistungsbedarf: 13 kWMaschinengewicht ca.: tRaumbedarf ca.: m
Raddurchmesser - max.: 2000 mm
Radbreite: . mm
Modul - max.: 22
größter Fräserdurchmesser: 250 mm
Fräserdrehzahlen: 16-92 U/min
Gesamtleistungsbedarf: 13 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Radbreite: . mm
Modul - max.: 22
größter Fräserdurchmesser: 250 mm
Fräserdrehzahlen: 16-92 U/min
Gesamtleistungsbedarf: 13 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsCutting machines and equipmentWater-jet cutting equipment and machines
x-Weg: 6000 mmy-Weg: 3000 mmz-Weg: 230 mmPumpenleistung: 3600 barWerkstückdicke - max.: 200 mmTischbelastung: 28 tVorschub: 84 m/minTisch: 6000x300 mmSteuerung: By VisionGesamtleistungsbedarf: kWMaschinengewicht ca.: 16,7 tRaumbedarf ca.: m
x-Weg: 6000 mm
y-Weg: 3000 mm
z-Weg: 230 mm
Pumpenleistung: 3600 bar
Werkstückdicke - max.: 200 mm
Tischbelastung: 28 t
Vorschub: 84 m/min
Tisch: 6000x300 mm
Steuerung: By Vision
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 16,7 t
Raumbedarf ca.: m
y-Weg: 3000 mm
z-Weg: 230 mm
Pumpenleistung: 3600 bar
Werkstückdicke - max.: 200 mm
Tischbelastung: 28 t
Vorschub: 84 m/min
Tisch: 6000x300 mm
Steuerung: By Vision
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 16,7 t
Raumbedarf ca.: m
10
Metal working and machine toolsCutting machines and equipmentWater-jet cutting equipment and machines
x-Weg: 4000 mmy-Weg: 3000 mmz-Weg: 230 mmPumpenleistung: 3600 barWerkstückdicke - max.: 200 mmTischbelastung: 14 tVorschub: 84 m/minTisch: 4000x300 mmSteuerung: By VisionGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 4000 mm
y-Weg: 3000 mm
z-Weg: 230 mm
Pumpenleistung: 3600 bar
Werkstückdicke - max.: 200 mm
Tischbelastung: 14 t
Vorschub: 84 m/min
Tisch: 4000x300 mm
Steuerung: By Vision
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
y-Weg: 3000 mm
z-Weg: 230 mm
Pumpenleistung: 3600 bar
Werkstückdicke - max.: 200 mm
Tischbelastung: 14 t
Vorschub: 84 m/min
Tisch: 4000x300 mm
Steuerung: By Vision
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsCutting machines and equipmentWater-jet cutting equipment and machines
x-Weg: 4000 mmy-Weg: 2200 mmz-Weg: 250 mmPumpenleistung: 3400 barBetriebsstunden: 22000 hWerkstückdicke - max.: 200 mmTischbelastung: 4 t/m²Vorschub: 84 m/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 4000 mm
y-Weg: 2200 mm
z-Weg: 250 mm
Pumpenleistung: 3400 bar
Betriebsstunden: 22000 h
Werkstückdicke - max.: 200 mm
Tischbelastung: 4 t/m²
Vorschub: 84 m/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
y-Weg: 2200 mm
z-Weg: 250 mm
Pumpenleistung: 3400 bar
Betriebsstunden: 22000 h
Werkstückdicke - max.: 200 mm
Tischbelastung: 4 t/m²
Vorschub: 84 m/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
8
Commercial vehiclesTrailersLow loader trailer
Anzahl Achsen: 2 St.Länge: 7,7 mGesamtgewicht: 20 tAchslast vorne: 10 tAchslast hinten: 10 tBreite: 2,5 m
Anzahl Achsen: 2 St.
Länge: 7,7 m
Gesamtgewicht: 20 t
Achslast vorne: 10 t
Achslast hinten: 10 t
Breite: 2,5 m
Länge: 7,7 m
Gesamtgewicht: 20 t
Achslast vorne: 10 t
Achslast hinten: 10 t
Breite: 2,5 m
4
Woodworking machineryWindow manufacturing machinesRoller conveyors
Rollenbahnlänge: 3000 mmRollenbreite: 600 mmRollenbahnbreite: 700 mmTragkraft: 2000 kgAbmessungen LxBxH: 3,5x1,2x0,75 m
Rollenbahnlänge: 3000 mm
Rollenbreite: 600 mm
Rollenbahnbreite: 700 mm
Tragkraft: 2000 kg
Abmessungen LxBxH: 3,5x1,2x0,75 m
Rollenbreite: 600 mm
Rollenbahnbreite: 700 mm
Tragkraft: 2000 kg
Abmessungen LxBxH: 3,5x1,2x0,75 m
3
Woodworking machineryWindow manufacturing machinesRoller conveyors
Rollenbahnlänge: 2800 mmRollenbreite: 720 mmRollenbahnbreite: 1000 mmTragkraft: 2000 kgHöhe: 760 mmAbmessungen LxBxH: 2,8x1x0,8 m
Rollenbahnlänge: 2800 mm
Rollenbreite: 720 mm
Rollenbahnbreite: 1000 mm
Tragkraft: 2000 kg
Höhe: 760 mm
Abmessungen LxBxH: 2,8x1x0,8 m
Rollenbreite: 720 mm
Rollenbahnbreite: 1000 mm
Tragkraft: 2000 kg
Höhe: 760 mm
Abmessungen LxBxH: 2,8x1x0,8 m
5
Woodworking machineryWindow manufacturing machinesRoller conveyors
Rollenbahnlänge: 2200 mmRollenbreite: 650 mmRollenbahnbreite: 900 mmTragkraft: 2000 kgAbmessungen LxBxH: 2,2x0,9x0,7 m
Rollenbahnlänge: 2200 mm
Rollenbreite: 650 mm
Rollenbahnbreite: 900 mm
Tragkraft: 2000 kg
Abmessungen LxBxH: 2,2x0,9x0,7 m
Rollenbreite: 650 mm
Rollenbahnbreite: 900 mm
Tragkraft: 2000 kg
Abmessungen LxBxH: 2,2x0,9x0,7 m
6
Woodworking machineryWindow manufacturing machinesRoller conveyors
Arbeitslänge: . mmArbeitsbreite: . mmRollenbreite: . mmRollenbahnlänge: 5500 mmRollenbahnbreite: 1200 mmTragkraft: kg
Arbeitslänge: . mm
Arbeitsbreite: . mm
Rollenbreite: . mm
Rollenbahnlänge: 5500 mm
Rollenbahnbreite: 1200 mm
Tragkraft: kg
Arbeitsbreite: . mm
Rollenbreite: . mm
Rollenbahnlänge: 5500 mm
Rollenbahnbreite: 1200 mm
Tragkraft: kg
5
Woodworking machineryWindow manufacturing machinesRoller conveyors
Arbeitslänge: . mmArbeitsbreite: . mmRollenbreite: . mmRollenbahnlänge: 6000 mmRollenbahnbreite: 1200 mmTragkraft: kg
Arbeitslänge: . mm
Arbeitsbreite: . mm
Rollenbreite: . mm
Rollenbahnlänge: 6000 mm
Rollenbahnbreite: 1200 mm
Tragkraft: kg
Arbeitsbreite: . mm
Rollenbreite: . mm
Rollenbahnlänge: 6000 mm
Rollenbahnbreite: 1200 mm
Tragkraft: kg
3
Metal working and machine toolsWelding machinesOther
Plattenlänge: 4600 mmPlattenbreite: 1620 mmPlattenhöhe: 380 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Plattenlänge: 4600 mm
Plattenbreite: 1620 mm
Plattenhöhe: 380 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Plattenbreite: 1620 mm
Plattenhöhe: 380 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
8
Metal working and machine toolsOther
Druck: 1645 tHub: 1000 mmEinbauhöhe: 3000 mmSenkgeschwindigkeit: 280 mm/secRückzugsgeschwindigkeit: 275/346 mm/secStänderweite: 2520 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: t
Druck: 1645 t
Hub: 1000 mm
Einbauhöhe: 3000 mm
Senkgeschwindigkeit: 280 mm/sec
Rückzugsgeschwindigkeit: 275/346 mm/sec
Ständerweite: 2520 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Hub: 1000 mm
Einbauhöhe: 3000 mm
Senkgeschwindigkeit: 280 mm/sec
Rückzugsgeschwindigkeit: 275/346 mm/sec
Ständerweite: 2520 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
10
Metal working and machine toolsOther
Druck: 1000 kgWerkstücklänge - max.: 6500 mmMaschinengewicht ca.: 600 tRaumbedarf ca.: 120x30 m
Druck: 1000 kg
Werkstücklänge - max.: 6500 mm
Maschinengewicht ca.: 600 t
Raumbedarf ca.: 120x30 m
Werkstücklänge - max.: 6500 mm
Maschinengewicht ca.: 600 t
Raumbedarf ca.: 120x30 m
6
Metal working and machine toolsOther
Bärgewicht: 480 kgHub: 710 mmAusladung: 550 mmSchlagleistung: 1250 kpmSchlagzahl: 210 Hub/minBärhub: 710 mmArbeitshöhe: 720 mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: 7,4 tRaumbedarf ca.: mDruck: 400 kg
Bärgewicht: 480 kg
Hub: 710 mm
Ausladung: 550 mm
Schlagleistung: 1250 kpm
Schlagzahl: 210 Hub/min
Bärhub: 710 mm
Arbeitshöhe: 720 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: 7,4 t
Raumbedarf ca.: m
Druck: 400 kg
Hub: 710 mm
Ausladung: 550 mm
Schlagleistung: 1250 kpm
Schlagzahl: 210 Hub/min
Bärhub: 710 mm
Arbeitshöhe: 720 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: 7,4 t
Raumbedarf ca.: m
Druck: 400 kg
8
Metal working and machine toolsOther
Nennleistung: 2000 KGBärhub: 1080 mmAusladung: 1100 mmSchlagleistung: 10000 kgmSchlagzahl: 125 Hub/minBärgewicht: 2300 kgArbeitshöhe: 620 mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: tRaumbedarf ca.: m
Nennleistung: 2000 KG
Bärhub: 1080 mm
Ausladung: 1100 mm
Schlagleistung: 10000 kgm
Schlagzahl: 125 Hub/min
Bärgewicht: 2300 kg
Arbeitshöhe: 620 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Bärhub: 1080 mm
Ausladung: 1100 mm
Schlagleistung: 10000 kgm
Schlagzahl: 125 Hub/min
Bärgewicht: 2300 kg
Arbeitshöhe: 620 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
7
Metal working and machine toolsOther
Bärgewicht: 1000 kgHub: 1000 mmAusladung: 800 mmSchlagleistung: 4200 mkpGesamtleistungsbedarf: . kWMaschinengewicht ca.: tRaumbedarf ca.: m
Bärgewicht: 1000 kg
Hub: 1000 mm
Ausladung: 800 mm
Schlagleistung: 4200 mkp
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Hub: 1000 mm
Ausladung: 800 mm
Schlagleistung: 4200 mkp
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
7
Metal working and machine toolsOther
Tragkraft: 12 tWerkstückbreite: 880 mmGesamtleistungsbedarf: 130 kWMaschinengewicht ca.: 63,3 t
Tragkraft: 12 t
Werkstückbreite: 880 mm
Gesamtleistungsbedarf: 130 kW
Maschinengewicht ca.: 63,3 t
Werkstückbreite: 880 mm
Gesamtleistungsbedarf: 130 kW
Maschinengewicht ca.: 63,3 t
2
Metal working and machine toolsSanding machinesCylindrical grinding machines
Schleifdurchmesser: 660 mmSchleiflänge: 2000 mmWerkstückgewicht: 1500 kgSchleifscheibendurchmesser: 400 mmSteuerung: X-As. Diatos 602Gesamtleistungsbedarf: 12/22/30 kWMaschinengewicht ca.: tRaumbedarf ca.: m
Schleifdurchmesser: 660 mm
Schleiflänge: 2000 mm
Werkstückgewicht: 1500 kg
Schleifscheibendurchmesser: 400 mm
Steuerung: X-As. Diatos 602
Gesamtleistungsbedarf: 12/22/30 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Schleiflänge: 2000 mm
Werkstückgewicht: 1500 kg
Schleifscheibendurchmesser: 400 mm
Steuerung: X-As. Diatos 602
Gesamtleistungsbedarf: 12/22/30 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m