IWM SAN100 SP Sanitiser tunnel, 2010, stainless, aperture 600mm x 600mm, belt dimensions 1800mm x 600mm, with recirculation tank, filter, level sensor, 3Ph

Allfill SHA15 Auger filler , Refurbed in 2023, touch screen control, stainless, auger filler variable speed or continuous fill, 75Kg stainless hopper with 50mm stainless screw discharge, with level detection, with foot pedal, Previously used inline with elevator screw for filling the hopper, 3Ph

Injectstar Vacuum tumbler, Stainless, 1200L tumbler, variable speed, timer controls, with vacuum, 3Ph

Ruhle MKR130 Tumbler, 2015, Stainless, 130l tumbler, 3Kw, mobile, 3Ph

Cintex Sentry Metal detector, Stainless, belt dimensions 1400mm x 290mm, aperture 400mm x 220mm, intralox belt, mobile, 3Ph

Logopak 920 IIP labeller, Serial: 2040294, 2004, Print and apply labelling system, high speed pallet labelling, with label and ribbon rolls of up to 1200m, up to 240 pallets per hour, touch screen controls, with manual, 3Ph

Nederman CARZ FL200 Explosion isolation flap valve, Serial: S12044, 2017, Explosion isolation flap valve, see plate for spec

Daikin ERQ200A7W1B Condensing unit, Serial: 8008515, 2020, condensing unit, Gas R410A, 3Ph

Arnott 90 degree conveyor, 2019, Stainless, 90 degree, slat chain conveyor, variable speed, with side guides, belt width 250mm, length 2400mm to the bend and 1000mm after bend, mobile, 3Ph

Zumex Speed Pro self service Juicer, Serial: 436746, 2016, Stainless juicer, capable of very quick performance and can juice 40fruits a minute while still producing an incredibly high yield, up to 4.5L of juice per min, mobile, 1Ph

Riggs 1000 Three head filler, Serial: TT1737, 2014, Stainless, Three head filling machine, with 200L stainless tank with level detection, comes with a spare set of pistons so can fill from 25ml - 5L, height adjustable filling heads, with boxes of spare parts, manuals and drawings

MEP AVT400 Capping machine, Serial: 271221, 2021, Stainless capper, Robust and easy to use capping machine suitable for applying ROPP, screw caps onto bottles with screw thread necks. Max bottle diameter 195mm, max bottle height 355mm, Up to 400 - 600 bottles per hour, mobile, 1Ph

Kiesel RG0 Wine tank agitator, Serial: 10640, 2020, Stainless propeller mixer, 600mm shaft length, 0.37Kw motor, up to 15,000L tank, 1400RPM, 3Ph

Letina PZP1100 Variable capacity tank, Serial: 146720, 2020, Stainless, Variable capacity tank, max capacity 1100L, with floating lid and inflatable gasket achieves an air tight seal

STS STP01 Power clamp drum tipper, Power clamp drum tipper can lift and tip drums and barrels from 50L to 220L, the unit is pneumatic-hydraulic powered, 350Kgs SWL, mobile

AC Hydraulic DT300H Hydraulic drum trolley, Serial: 281280, Hydraulic drum trolley, designed to lift 200l drums, equipped with a gripping device, mobile

Alfa Laval LKH-UP70 Centrifugal pump, Year 2023, Serial: 298034, Stainless centrifugal pump, 22Kw motor, 3Ph

Arnott Stainless conveyor, 2019, Stainless, slat band conveyor, belt dimensions 1000mm x 250mm, mobile

Woods 56JM/20/4/6/10-36 flow extract fan, Year 2021, 560mm fan diameter, 1420 rev/min, see plate for spec, 5 in stock, 3Ph

DTB washing conveyor, Stainless, belt dimensions 1200mm x 300mm, with jet spray mounted on top of the conveyor with recirculation tank and pump for washing products, previously used for olives, 3Ph

Grundfos CHI2-30 A-W-G Pump, 2010, 2900RPM, 2.5M3/H, rated head 19M, 19mm impeller, max operating pressure 10bar, 3Ph (two in stock)

Hache 1720E Turbidimeter, Hach 1720E Continuous-reading Nephelometric Low Range Process Turbidimeter, Continuously flowing sample flows through the patented bubble removal system, which vents entrained air from the sample stream and eliminates the most significant interference in low level turbidity measurement. The 1720E Turbidimeter is not affected by variations in flow and pressure, The 1720E Turbidimeter uses the sc200 Controller to receive data from up to two sensors. A built-in data logger collects turbidity measurement at user selectable intervals (1-15 minutes), along with calibration and verification points, alarm history, and instrument setup changes for 6 months.

Europ-Plast VCPA315 centrifugal extraction fan, Serial: V9064, 2010, chemical resistant centrifugal extraction fan, 5.5Kw, all fans are manufacturered as direct drive assemblies and all casings are fully welded and come standard with chemical resistant vapor seals

Longwood D screen Fine screen, 2010, Dscreen simple design, operation and maintenance make it the ideal choice for reliable stand alone water filtration, fully enclosed unit, self cleaning screen, 0.8mm screens, Length 1200mm, width 1023mm, 0.37Kw motor, two available

Longwood Rotapak150 Screw compactor, 2010, screw compactor, screenings handling equipment, screw diameter 150mm, capacity 0.5M3/hr, 1.5Kw motor, 3Ph

Lowara 10HM02P11T5RVBE Multistage pump, Serial: 20170110, 2010, Horizontal multistage pump, mounted on stainless frame with Xylem flow meter, 1.23Kw, see plate for full spec

Sigma S2CAHM07120PVT Metering pump, Serial: 2010132518, 2010, 0.25Kw, Metering pumps, 3 in stock

Hoval Air receiver tank, 2010, capacity 500L, working temp -10'C to 45'C, max working pressure 10Bar,

AVK Flanged gate valve, 2010, flanged gate valves with handwheels, 10+ in stock, various sizes

Punching power: 110 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 420/20 bzw. 28/28 mm
Stroke: 80 mm
Strokes: 28 1/min
Flat steel: 600x15 / 400x20 mm
Angle steel: 152x152x13 mm
Round / square steel: 50 mm
Notcher: 13x52x90 mm
Motor: 9 kW
Length: 2690 mm
Width: 1400 mm
Height: 2200 mm
Weight: 3300 kg

Saw frame: Double column
Band dimensions: 5750 x 41 x 1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 420 mm
Cutting capacity 0° square: 420 mm
Cutting capacity 0° flat: 420 x 420 mm
Working height: 805 mm
Hydraulic motor: 1.1 kW
Motor: 5.5 kW
Servomotor: 1 kW
Coolant pump motor: 0.12 kW
Length: 2860 mm
Width: 1980 mm
Height: 2100 mm
Weight: 3700 kg

Bending length: 2040 mm
Sheet thickness (420 N/mm²): 3 mm
Max. thickness - stainless steel: 2 mm
Max. thickness - aluminium: 4.5 mm
Antrieb: Motorized
Motor bending beam: 1.5 kW
Upper beam motor: 1.1 kW
Back gauge: 750 mm
Opening of upper beam: 140 mm
Bending speed: 50 °/sek
Length: 3060 mm
Width: 1650 mm
Height: 1500 mm
Weight: 2730 kg

Polar 92 XT

Year: 2007
Touch screen control

Normal and small clamping plate
Knife change tools
Spare knives
Big right side table
P-net Netwerk integration P-N V1.1.2

Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm

Drilling capacy mild steel: 30 mm
Taper: MK 3
Distance spindle - column: 250 mm
Revs: 245 - 4000 r.p.m.
Tapping capacity: M25
max. drilling depth: 120 mm
Column diameter: 100 mm
Distance spindle - table: 85 - 635 mm
Distance spindle-base: 1.195 mm
Table: 300 x 270 mm
Base dimensions: 600 x 380 mm
Length: 400 mm
Width: 655 mm
Height: 1185 mm
Weight: 280 kg

Saw frame: Double column
Band dimensions: 5000 x 34 x 1,1 mm mm
Band speed continous: 20 - 120 m/min
Cutting capacity 0° round: 330 mm
Cutting capacity 0° square: 330 mm
Cutting capacity 0° flat: 350 x 330 mm
Working height: 845 mm
Hydraulic motor: 1.1 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2815 mm
Width: 1935 mm
Height: 1855 mm
Weight: 2560 kg

Saw frame: Double column
Band dimensions: 5750 x 41 x 1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 520 x 460 mm
Working height: 585 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3000 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1650 kg

Punching power: 55 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 mm
Angle steel: 120x10 mm
Round / square steel: 40 mm
Notcher: 10 mm
Motor: 5 kW
Length: 1670 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1390 kg

Polar Mohr 66 Programmable Guillotine (2001)

Key Features:

Model: POLAR 66
Year: 2001
Maximum Cutting Width: 66 cm
Ownership: Single-owner machine since new
Condition: Fully cleaned, checked, serviced, and tested
Programs: Digital programmable control for precision cutting
Safety: Equipped with safety beam guards for operator protection
Accessories:
Two steel side tables
One spare blade

Polar 115 E

Year: 2001

Chrome table with air
side tables: 2x 1m2 resopal with air

Knife change tools
spare knife

Punching power: 110 ton
Throat depth: 300 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x20 (28x28) mm
Stroke: 80 mm
Strokes: 17 1/min
Flat steel: 600x15 (400x20) mm
Blade length: 605 mm
Angle steel: 152x152x13 mm
Round / square steel: 50/50 mm
Notcher: 90x52x13 mm
Motor: 5 kW
Length: 2130 mm
Width: 1200 mm
Height: 2200 mm
Weight: 2500 kg

Saw frame: Pivot frame
Band dimensions: 5200x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 440 mm
Cutting capacity 0° square: 440 mm
Cutting capacity 0° flat: 610x440 mm
Cutting capacity 45°: rund 410 mm, quadrat 410 mm, rechteck 410 x 440 mm
Cutting capacity 60°: rund 320 mm, quadrat 250 mm, rechteck 250 x 440 mm
Cutting capacity - 45°: rund 410 mm, quadrat 410 mm, rechteck 410 x 440 mm
Cutting capacity - 60°: rund 320 mm, quadrat 285 mm, rechteck 285 x 440 mm
Working height: 860 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2800 mm
Width: 1210 mm
Height: 1870 mm
Weight: 1540 kg

Working width: 650
Sheet thickness range - mild steel: 0,5 - 170 mm
Grinding belt dimensions: 670 x 2200 mm
Suction capacity: 4000 m³/h
Connection for dust collector diam.: 120 mm
Air connection: 6 bar
Noise level: 83 dB
Motor: 22 kW
Length: 2600 mm
Width: 1350 mm
Height: 2100 mm
Weight: 1125 kg

Cutting length: 3100 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 2 °
Number of downholders: 14 pcs.
Pressure of downholder: 61 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3580 mm
Length: 4550 mm
Width: 2250 mm
Total width with support arm und protection fence: 3825 mm
Height: 2250 mm
Weight: 15000 kg

Cutting length: 4100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 350 mm
Strokes: 8 1/min
Cutting angle: 1.75 °
Number of downholders: 18 pcs.
Pressure of downholder: 62 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 3 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 4520 mm
Length: 5350 mm
Width: 2250 mm
Total width with support arm und protection fence: 3650 mm
Height: 2250 mm
Weight: 16300 kg

Cutting length: 3100 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 8 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.75 °
Number of downholders: 16 pcs.
Pressure of downholder: 37 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 30 kW
Oiltank: 330 l
Support arms: 2 pcs.
Table height: 840 mm
Table width: 600 mm
Table length: 3550 mm
Length: 4280 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2350 mm
Weight: 12500 kg

Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Gap in side frame: 50 mm
Strokes: 13 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 22 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 3515 mm
Length: 4200 mm
Width: 2250 mm
Total width with support arm und protection fence: 3600 mm
Height: 2100 mm
Weight: 9300 kg

Cutting length: 4100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 12 1/min
Cutting angle: 1.5 °
Number of downholders: 20 pcs.
Pressure of downholder: 17 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 3 pcs.
Table height: 865 mm
Table width: 580 mm
Table length: 4510 mm
Length: 5230 mm
Width: 2300 mm
Total width with support arm und protection fence: 3600 mm
Height: 2150 mm
Weight: 11460 kg

Max. thickness - mild steel: 4 mm
Throat depth: 200 mm
Shaft length: 300 mm
Tools: 4 pcs.
Rolls diameter: 126 mm
Revs: 10 1/min
Length: 1475 mm
Width: 550 mm
Height: 1200 mm
Weight: 460 kg

Max. thickness - mild steel: 2.5 mm
Throat depth: 160 mm
Shaft length: 250 mm
Tools: 4 pcs.
Rolls diameter: 96 mm
Revs: 13 1/min
Length: 1475 mm
Width: 550 mm
Height: 1200 mm
Weight: 320 kg