1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1530 mm
Max. thickness - mild steel: 12 mm
Max. thickness - stainless steel: 9 mm
Strokes: 8 1/min
Cutting angle: 3 °
Number of downholders: 8 pcs.
Back gauge: 500 mm
Motor power: 15 kW
Oiltank: 180 l
Table height: 950 mm
Length: 2200 mm
Width: 1200 mm
Height: 1800 mm
Weight: 3400 kg
Cutting length: 1530 mm
Max. thickness - mild steel: 12 mm
Max. thickness - stainless steel: 9 mm
Strokes: 8 1/min
Cutting angle: 3 °
Number of downholders: 8 pcs.
Back gauge: 500 mm
Motor power: 15 kW
Oiltank: 180 l
Table height: 950 mm
Length: 2200 mm
Width: 1200 mm
Height: 1800 mm
Weight: 3400 kg
Max. thickness - mild steel: 12 mm
Max. thickness - stainless steel: 9 mm
Strokes: 8 1/min
Cutting angle: 3 °
Number of downholders: 8 pcs.
Back gauge: 500 mm
Motor power: 15 kW
Oiltank: 180 l
Table height: 950 mm
Length: 2200 mm
Width: 1200 mm
Height: 1800 mm
Weight: 3400 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1280 mm
Max. thickness - mild steel: 12 mm
Max. thickness - stainless steel: 9 mm
Strokes: 9 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 15 kW
Oiltank: 180 l
Table height: 950 mm
Length: 1950 mm
Width: 1200 mm
Height: 1800 mm
Weight: 3200 kg
Cutting length: 1280 mm
Max. thickness - mild steel: 12 mm
Max. thickness - stainless steel: 9 mm
Strokes: 9 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 15 kW
Oiltank: 180 l
Table height: 950 mm
Length: 1950 mm
Width: 1200 mm
Height: 1800 mm
Weight: 3200 kg
Max. thickness - mild steel: 12 mm
Max. thickness - stainless steel: 9 mm
Strokes: 9 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 15 kW
Oiltank: 180 l
Table height: 950 mm
Length: 1950 mm
Width: 1200 mm
Height: 1800 mm
Weight: 3200 kg
2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 6080 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0.5 - 2.5 °
Number of downholders: 29 pcs.
Pressure of downholder: 58 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 400 l
Support arms: 6 pcs.
Table height: 950 mm
Table width: 650 mm
Table length: 6375 mm
Length: 7400 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2900 mm
Weight: 33820 kg
Cutting length: 6080 mm
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0.5 - 2.5 °
Number of downholders: 29 pcs.
Pressure of downholder: 58 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 400 l
Support arms: 6 pcs.
Table height: 950 mm
Table width: 650 mm
Table length: 6375 mm
Length: 7400 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2900 mm
Weight: 33820 kg
Max. thickness - mild steel: 13 mm
Max. thickness - stainless steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0.5 - 2.5 °
Number of downholders: 29 pcs.
Pressure of downholder: 58 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 37 kW
Oiltank: 400 l
Support arms: 6 pcs.
Table height: 950 mm
Table width: 650 mm
Table length: 6375 mm
Length: 7400 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2900 mm
Weight: 33820 kg
2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 6080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 29 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 5 pcs.
Table height: 900 mm
Table width: 630 mm
Table length: 6370 mm
Length: 7300 mm
Width: 2150 mm
Total width with support arm und protection fence: 3400 mm
Height: 2750 mm
Weight: 25500 kg
Cutting length: 6080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 29 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 5 pcs.
Table height: 900 mm
Table width: 630 mm
Table length: 6370 mm
Length: 7300 mm
Width: 2150 mm
Total width with support arm und protection fence: 3400 mm
Height: 2750 mm
Weight: 25500 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 29 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 5 pcs.
Table height: 900 mm
Table width: 630 mm
Table length: 6370 mm
Length: 7300 mm
Width: 2150 mm
Total width with support arm und protection fence: 3400 mm
Height: 2750 mm
Weight: 25500 kg
2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 20 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 16 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 11 kW
Oiltank: 125 l
Support arms: 3 pcs.
Table height: 820 mm
Table width: 494 mm
Table length: 3280 mm
Length: 4100 mm
Width: 2050 mm
Total width with support arm und protection fence: 3650 mm
Height: 1950 mm
Weight: 7980 kg
Cutting length: 3080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 20 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 16 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 11 kW
Oiltank: 125 l
Support arms: 3 pcs.
Table height: 820 mm
Table width: 494 mm
Table length: 3280 mm
Length: 4100 mm
Width: 2050 mm
Total width with support arm und protection fence: 3650 mm
Height: 1950 mm
Weight: 7980 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 20 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 16 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 11 kW
Oiltank: 125 l
Support arms: 3 pcs.
Table height: 820 mm
Table width: 494 mm
Table length: 3280 mm
Length: 4100 mm
Width: 2050 mm
Total width with support arm und protection fence: 3650 mm
Height: 1950 mm
Weight: 7980 kg
2
Metal working and machine toolsLathes
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7.5 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7.5 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7.5 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 400 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X Achse
Stroke: 365 mm
Inside distance between side frames: 3400 mm
Gap in side frame: 510 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 1050 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 37 kW
Length: 5750 mm
Width: 2110 mm
Height: 3640 mm
Weight: 27760 kg
pressing capacity: 400 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X Achse
Stroke: 365 mm
Inside distance between side frames: 3400 mm
Gap in side frame: 510 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 1050 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 37 kW
Length: 5750 mm
Width: 2110 mm
Height: 3640 mm
Weight: 27760 kg
Bending length: 4050 mm
Axes: Y1 / Y2 / X Achse
Stroke: 365 mm
Inside distance between side frames: 3400 mm
Gap in side frame: 510 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 1050 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 37 kW
Length: 5750 mm
Width: 2110 mm
Height: 3640 mm
Weight: 27760 kg
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18591
Manufacturer: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.
These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.
Typical features of this series include:
* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements
The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.
ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
Ref. no.: 18591
Manufacturer: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.
These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.
Typical features of this series include:
* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements
The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.
ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
Manufacturer: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.
These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.
Typical features of this series include:
* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements
The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.
ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
3
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 2500 mm
Max. bending capacity - mild steel: 27
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 27
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
Max. bending capacity - mild steel: 27
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
5
Metal working and machine toolsPressesWorkshop press
pressing capacity: 80 to
Cylinder fix or moveable: horizontal moveable
Stroke: 250 mm
Distance between columns: 1040 mm
Distance between table and toolholder: 865 mm
Piston diameter: 200x120 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1710 mm
Width: 700 mm
Height: 2100 mm
Weight: 835 kg
pressing capacity: 80 to
Cylinder fix or moveable: horizontal moveable
Stroke: 250 mm
Distance between columns: 1040 mm
Distance between table and toolholder: 865 mm
Piston diameter: 200x120 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1710 mm
Width: 700 mm
Height: 2100 mm
Weight: 835 kg
Cylinder fix or moveable: horizontal moveable
Stroke: 250 mm
Distance between columns: 1040 mm
Distance between table and toolholder: 865 mm
Piston diameter: 200x120 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1710 mm
Width: 700 mm
Height: 2100 mm
Weight: 835 kg
8
Metal working and machine toolsPressesEccentric presses
pressing capacity: 40 to
Tonnage rating point: 4 mm
Table length: 630 mm
Table width: 450 mm
Hole in table: 160 mm
Stroke: 3 - 75 mm
Strokes: 154 1/min
Ram: 415 x 275 mm
Ram guides: 8
Ram adjustment: 75 mm
Ram hole: 40 mm
Throat depth: 230 mm
Daylight: 293 mm
Motor: 4 kW
Length: 1174 mm
Width: 1540 mm
Height: 2200 mm
Weight: 2850 kg
pressing capacity: 40 to
Tonnage rating point: 4 mm
Table length: 630 mm
Table width: 450 mm
Hole in table: 160 mm
Stroke: 3 - 75 mm
Strokes: 154 1/min
Ram: 415 x 275 mm
Ram guides: 8
Ram adjustment: 75 mm
Ram hole: 40 mm
Throat depth: 230 mm
Daylight: 293 mm
Motor: 4 kW
Length: 1174 mm
Width: 1540 mm
Height: 2200 mm
Weight: 2850 kg
Tonnage rating point: 4 mm
Table length: 630 mm
Table width: 450 mm
Hole in table: 160 mm
Stroke: 3 - 75 mm
Strokes: 154 1/min
Ram: 415 x 275 mm
Ram guides: 8
Ram adjustment: 75 mm
Ram hole: 40 mm
Throat depth: 230 mm
Daylight: 293 mm
Motor: 4 kW
Length: 1174 mm
Width: 1540 mm
Height: 2200 mm
Weight: 2850 kg
5
Metal working and machine toolsAccessories and spare parts
Jaw opening: 120 mm
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
Jaw opening: 120 mm
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
6
Metal working and machine toolsAccessories and spare parts
Jaw opening: 80 mm
jaw height: 28 mm
Opening of upper beam: 120 mm
Weight: 12 kg
Jaw opening: 80 mm
jaw height: 28 mm
Opening of upper beam: 120 mm
Weight: 12 kg
jaw height: 28 mm
Opening of upper beam: 120 mm
Weight: 12 kg
8
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 30 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: Stufe 1: 125 - 2000, Stufe 2: 250 - 4000 r.p.m.
Motor: 0,9 / 1,45 kW kW
Tapping capacity: M20
Feeds: 0 - 300 mm/r
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 820 mm
Width: 520 mm
Height: 1900 mm
Weight: 320 kg
Drilling capacy mild steel: 30 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: Stufe 1: 125 - 2000, Stufe 2: 250 - 4000 r.p.m.
Motor: 0,9 / 1,45 kW kW
Tapping capacity: M20
Feeds: 0 - 300 mm/r
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 820 mm
Width: 520 mm
Height: 1900 mm
Weight: 320 kg
Taper: MK 3
Distance spindle - column: 280 mm
Revs: Stufe 1: 125 - 2000, Stufe 2: 250 - 4000 r.p.m.
Motor: 0,9 / 1,45 kW kW
Tapping capacity: M20
Feeds: 0 - 300 mm/r
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 820 mm
Width: 520 mm
Height: 1900 mm
Weight: 320 kg
5
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 30
Upper roll diameter: 148 mm
Lower roll diameter: 118 mm
Driven rolls: 2
Motor power: 0.7 / 0,85 kW
Speed: 2/4 m/min
Flat steel vertical position (section / min. diameter): 50x10 mm / 1.800 mm, 20x6 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 80x15 mm / 700 mm, 30 x 6 mm / 400 mm
Square bar (section / min. diameter): 30x30 mm / 900 mm, 10x10 mm / 200 mm
Round bar (section / min. diameter): Ø 30 mm / 900 mm, Ø 10 mm / 200 mm
Tube (section / min. diameter): Ø 60x1,5 mm / 1.000 mm, Ø 25x1,5 mm / 600 mm, 1 1/2"x2,9 mm / 600 mm, 1/4"x1,8 mm / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 50x30x3 mm / 1.200 mm, 40x20x2 mm / 800 mm
Form tube square (section / min. diameter): 40x40x3 mm / 1.200 mm, 30x30x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 40x40x5 mm / 600 mm, 30x30x4 mm / 300 mm
Angle leg inside (section / min. diameter): 35x35x5 mm / 600 mm, 30x30x4 mm / 400 mm
Length: 600 mm
Width: 800 mm
Height: 1450 mm
Weight: 220 kg
Shaft diameter: 30
Upper roll diameter: 148 mm
Lower roll diameter: 118 mm
Driven rolls: 2
Motor power: 0.7 / 0,85 kW
Speed: 2/4 m/min
Flat steel vertical position (section / min. diameter): 50x10 mm / 1.800 mm, 20x6 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 80x15 mm / 700 mm, 30 x 6 mm / 400 mm
Square bar (section / min. diameter): 30x30 mm / 900 mm, 10x10 mm / 200 mm
Round bar (section / min. diameter): Ø 30 mm / 900 mm, Ø 10 mm / 200 mm
Tube (section / min. diameter): Ø 60x1,5 mm / 1.000 mm, Ø 25x1,5 mm / 600 mm, 1 1/2"x2,9 mm / 600 mm, 1/4"x1,8 mm / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 50x30x3 mm / 1.200 mm, 40x20x2 mm / 800 mm
Form tube square (section / min. diameter): 40x40x3 mm / 1.200 mm, 30x30x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 40x40x5 mm / 600 mm, 30x30x4 mm / 300 mm
Angle leg inside (section / min. diameter): 35x35x5 mm / 600 mm, 30x30x4 mm / 400 mm
Length: 600 mm
Width: 800 mm
Height: 1450 mm
Weight: 220 kg
Upper roll diameter: 148 mm
Lower roll diameter: 118 mm
Driven rolls: 2
Motor power: 0.7 / 0,85 kW
Speed: 2/4 m/min
Flat steel vertical position (section / min. diameter): 50x10 mm / 1.800 mm, 20x6 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 80x15 mm / 700 mm, 30 x 6 mm / 400 mm
Square bar (section / min. diameter): 30x30 mm / 900 mm, 10x10 mm / 200 mm
Round bar (section / min. diameter): Ø 30 mm / 900 mm, Ø 10 mm / 200 mm
Tube (section / min. diameter): Ø 60x1,5 mm / 1.000 mm, Ø 25x1,5 mm / 600 mm, 1 1/2"x2,9 mm / 600 mm, 1/4"x1,8 mm / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 50x30x3 mm / 1.200 mm, 40x20x2 mm / 800 mm
Form tube square (section / min. diameter): 40x40x3 mm / 1.200 mm, 30x30x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 40x40x5 mm / 600 mm, 30x30x4 mm / 300 mm
Angle leg inside (section / min. diameter): 35x35x5 mm / 600 mm, 30x30x4 mm / 400 mm
Length: 600 mm
Width: 800 mm
Height: 1450 mm
Weight: 220 kg
10
Food machinesMixing machinery
DC Norris 2700 Industrial Wok, Serial: 2827, 2013, Stainless, 150L capacity, tilting, HMI Touch screen controls, tilting for discharge, comes with a thermal oil heater for the jacket, 3Ph
DC Norris 2700 Industrial Wok, Serial: 2827, 2013, Stainless, 150L capacity, tilting, HMI Touch screen controls, tilting for discharge, comes with a thermal oil heater for the jacket, 3Ph
8
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 50 mm
Strokes: 15 1/min
Cutting angle: 1.5 °
Number of downholders: 16 pcs.
Pressure of downholder: 14 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 15 kW
Oiltank: 200 l
Support arms: 2 pcs.
Table height: 865 mm
Table width: 500 mm
Table length: 3515 mm
Length: 4110 mm
Width: 2200 mm
Total width with support arm und protection fence: 3700 mm
Height: 2100 mm
Weight: 7300 kg
5
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 50
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
Shaft diameter: 50
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
10
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 205 mmx-Weg: 10000 mmy-Weg: 2500 mmw-Achse: 500 mmSpindelweg: 1250 mmSteuerung: HeidenhainTyp: TNC 355Spindelaufnahme ISO: 50Getriebestufen: 2Vorschub - selbsttätig: 0-3000 mmSpindelantrieb: 37 kWGesamtleistungsbedarf: 70 kWMaschinengewicht ca.: tRaumbedarf ca.: 14,1x3,2x5,6 m
Spindeldurchmesser: 205 mm
x-Weg: 10000 mm
y-Weg: 2500 mm
w-Achse: 500 mm
Spindelweg: 1250 mm
Steuerung: Heidenhain
Typ: TNC 355
Spindelaufnahme ISO: 50
Getriebestufen: 2
Vorschub - selbsttätig: 0-3000 mm
Spindelantrieb: 37 kW
Gesamtleistungsbedarf: 70 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 14,1x3,2x5,6 m
x-Weg: 10000 mm
y-Weg: 2500 mm
w-Achse: 500 mm
Spindelweg: 1250 mm
Steuerung: Heidenhain
Typ: TNC 355
Spindelaufnahme ISO: 50
Getriebestufen: 2
Vorschub - selbsttätig: 0-3000 mm
Spindelantrieb: 37 kW
Gesamtleistungsbedarf: 70 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 14,1x3,2x5,6 m
Metal working and machine toolsSheet metal working machinesPipe-bending machines
Rohrdurchmesser: . mmWandstärke: 15 St52 und Edelstahl mmBiegeradius min.: 6-120 mmBiegewinkel max.: 150 °Maschinengewicht ca.: 1,7 KgRaumbedarf ca.: 2000x2000x1300 m
Rohrdurchmesser: . mm
Wandstärke: 15 St52 und Edelstahl mm
Biegeradius min.: 6-120 mm
Biegewinkel max.: 150 °
Maschinengewicht ca.: 1,7 Kg
Raumbedarf ca.: 2000x2000x1300 m
Wandstärke: 15 St52 und Edelstahl mm
Biegeradius min.: 6-120 mm
Biegewinkel max.: 150 °
Maschinengewicht ca.: 1,7 Kg
Raumbedarf ca.: 2000x2000x1300 m
Metal working and machine toolsSheet metal working machinesPiercing presses
Rohrdurchmesser: 40-168 mmWandstärke: . mmBiegeradius min.: ohne Rohr 190 mmNachdruckvorrichtung: mitElektromotor: 30 kWSpannung: 380 VBetriebsdruck: 200 barDoppelregelpumpe: je. 46 l/mPumpensteuerung: 4/3 Wege VentilePumpendruckmittel: Hydrauliköl der HLP 300 ltr.Antrieb: Hydraulikzyl. RollenketteE-Steuerung: Tastatur, Steuerung SPSGesamtleistungsbedarf: kWMaschinengewicht ca.: 22 tRaumbedarf ca.: 30 m2 m
Rohrdurchmesser: 40-168 mm
Wandstärke: . mm
Biegeradius min.: ohne Rohr 190 mm
Nachdruckvorrichtung: mit
Elektromotor: 30 kW
Spannung: 380 V
Betriebsdruck: 200 bar
Doppelregelpumpe: je. 46 l/m
Pumpensteuerung: 4/3 Wege Ventile
Pumpendruckmittel: Hydrauliköl der HLP 300 ltr.
Antrieb: Hydraulikzyl. Rollenkette
E-Steuerung: Tastatur, Steuerung SPS
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 22 t
Raumbedarf ca.: 30 m2 m
Wandstärke: . mm
Biegeradius min.: ohne Rohr 190 mm
Nachdruckvorrichtung: mit
Elektromotor: 30 kW
Spannung: 380 V
Betriebsdruck: 200 bar
Doppelregelpumpe: je. 46 l/m
Pumpensteuerung: 4/3 Wege Ventile
Pumpendruckmittel: Hydrauliköl der HLP 300 ltr.
Antrieb: Hydraulikzyl. Rollenkette
E-Steuerung: Tastatur, Steuerung SPS
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 22 t
Raumbedarf ca.: 30 m2 m
10
Metal working and machine toolsDrilling machines and boring millsTable boring mills
Spindeldurchmesser: 125 mmx-Weg: 2000 mmy-Weg: 1100 mmz-Weg: SK 50 mmSpindelaufnahme: Philips 2500Digitalanzeige: PfillipsDrehzahl: 925 U/minSpindelhub: 800 mmTisch: 1000x1400 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 125 mm
x-Weg: 2000 mm
y-Weg: 1100 mm
z-Weg: SK 50 mm
Spindelaufnahme: Philips 2500
Digitalanzeige: Pfillips
Drehzahl: 925 U/min
Spindelhub: 800 mm
Tisch: 1000x1400 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
x-Weg: 2000 mm
y-Weg: 1100 mm
z-Weg: SK 50 mm
Spindelaufnahme: Philips 2500
Digitalanzeige: Pfillips
Drehzahl: 925 U/min
Spindelhub: 800 mm
Tisch: 1000x1400 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
1
Food machinesBeverage productionPumps
Fristam RPE752 Centrifugal pump, 2018, Stainless centrifugal pump, 2900 RPM, 11Kw, impeller diameter 200mm, 3Ph
Fristam RPE752 Centrifugal pump, 2018, Stainless centrifugal pump, 2900 RPM, 11Kw, impeller diameter 200mm, 3Ph
6
Food machinesMeat processing
Mueller P7505 Pure steam generator, Serial: 394131-1, 2009, Stainless steam generator, 5700Kgs per hour, Allen Bradley touch screen controls, two in stock, 3Ph
Mueller P7505 Pure steam generator, Serial: 394131-1, 2009, Stainless steam generator, 5700Kgs per hour, Allen Bradley touch screen controls, two in stock, 3Ph
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18586
Manufacturer: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg
Further information:
👉
Fully electric machine offering maximum precision, lowest energy consumption and highest process stability
his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.
With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.
Key features:
* Solid and durable construction for long-term operation
* High injection performance and process stability
* Reliable KraussMaffei MC5 control system
* Suitable for continuous industrial use
* Good availability of spare parts
The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.
Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.
The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.
Ref. no.: 18586
Manufacturer: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg
Further information:
👉
Fully electric machine offering maximum precision, lowest energy consumption and highest process stability
his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.
With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.
Key features:
* Solid and durable construction for long-term operation
* High injection performance and process stability
* Reliable KraussMaffei MC5 control system
* Suitable for continuous industrial use
* Good availability of spare parts
The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.
Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.
The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.
Manufacturer: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg
Further information:
👉
Fully electric machine offering maximum precision, lowest energy consumption and highest process stability
his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.
With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.
Key features:
* Solid and durable construction for long-term operation
* High injection performance and process stability
* Reliable KraussMaffei MC5 control system
* Suitable for continuous industrial use
* Good availability of spare parts
The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.
Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.
The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.
5
Food machinesPackaging machinery
Siat Pallet wrapper, Serial: 14365, 2002, turntable pallet wrapper, 1650mm diameter turntable, variable speed and tension controls, 3Ph
Siat Pallet wrapper, Serial: 14365, 2002, turntable pallet wrapper, 1650mm diameter turntable, variable speed and tension controls, 3Ph
8
Food machinesMeat processing
BWT VT2000 Pure steam generator, Serial: V16010, 2016, BTW Vapotron VT2000, max output 2200 Kg/hour steam, with Elmo Rietschle vac pump, all mounted on stainless skid, two in stock
BWT VT2000 Pure steam generator, Serial: V16010, 2016, BTW Vapotron VT2000, max output 2200 Kg/hour steam, with Elmo Rietschle vac pump, all mounted on stainless skid, two in stock
4
Food machinesBeverage productionPumps
Becker VT4.8 Vacuum pump, 2014, see plate for spec, 15 in stock
Becker VT4.8 Vacuum pump, 2014, see plate for spec, 15 in stock
7
Food machinesPackaging machinery
Seal It Systems ET-900L semi automatic heat seal machine, Serial: 590, 2015, semi auto heat sealer, pot sealer, currently set for 130mm diameter pots, with adjustable temperature control, with counter, 1Ph
Seal It Systems ET-900L semi automatic heat seal machine, Serial: 590, 2015, semi auto heat sealer, pot sealer, currently set for 130mm diameter pots, with adjustable temperature control, with counter, 1Ph
5
Food machinesOther
Spirotech Screw conveyor, 2018, Stainless, screw diameter 300mm, screw length 3100mm, 3Kw, 3Ph
Spirotech Screw conveyor, 2018, Stainless, screw diameter 300mm, screw length 3100mm, 3Kw, 3Ph
5
Food machinesOther
Spirotech screw conveyor, 2018, Stainless screw conveyor, 50Kg hopper, screw diameter 300mm, screw length 2300mm, 2.2Kw, 3Ph
Spirotech screw conveyor, 2018, Stainless screw conveyor, 50Kg hopper, screw diameter 300mm, screw length 2300mm, 2.2Kw, 3Ph
5
Food machinesBakery-, pastry equipmentMixers
Tatham 1500Kg Twin shaft paddle mixer, Serial: CO1040, Stainless, 1200Kg max batch size, twin shaft paddle mixer, New motors, new gearbox, new chains, with stainless holding hopper at base
Tatham 1500Kg Twin shaft paddle mixer, Serial: CO1040, Stainless, 1200Kg max batch size, twin shaft paddle mixer, New motors, new gearbox, new chains, with stainless holding hopper at base
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 100 to
Stroke: 600 mm
Table: 900 x 500 mm
Daylight: 800 mm
Throat depth: 400 mm
Rapid speed: 220 mm/s
Working speed: 1 - 20 mm/s
Retraction speed: 250 mm/s
Motor: 14 kW
Working pressure: 30 - 239 bar
Length: 1900 mm
Width: 1700 mm
Height: 4400 mm
Weight: 6000 kg
pressing capacity: 100 to
Stroke: 600 mm
Table: 900 x 500 mm
Daylight: 800 mm
Throat depth: 400 mm
Rapid speed: 220 mm/s
Working speed: 1 - 20 mm/s
Retraction speed: 250 mm/s
Motor: 14 kW
Working pressure: 30 - 239 bar
Length: 1900 mm
Width: 1700 mm
Height: 4400 mm
Weight: 6000 kg
Stroke: 600 mm
Table: 900 x 500 mm
Daylight: 800 mm
Throat depth: 400 mm
Rapid speed: 220 mm/s
Working speed: 1 - 20 mm/s
Retraction speed: 250 mm/s
Motor: 14 kW
Working pressure: 30 - 239 bar
Length: 1900 mm
Width: 1700 mm
Height: 4400 mm
Weight: 6000 kg
8
Metal working and machine toolsMachining centersMachining centers horizontal
x-Achse: 1000 mmy-Achse: 500 mmz-Achse: 500 mmTeilapparat: CNCAchsen: 4Spindelaufnahme ISO: 40Tischfläche: 1200x508 mmTischbelastung: 600 kgSteuerung: Fadal CNC 88 HSNummer:: 9505858Drehzahl: 40-7500 U/minWerkzeugwechsler: 21
x-Achse: 1000 mm
y-Achse: 500 mm
z-Achse: 500 mm
Teilapparat: CNC
Achsen: 4
Spindelaufnahme ISO: 40
Tischfläche: 1200x508 mm
Tischbelastung: 600 kg
Steuerung: Fadal CNC 88 HS
Nummer:: 9505858
Drehzahl: 40-7500 U/min
Werkzeugwechsler: 21
y-Achse: 500 mm
z-Achse: 500 mm
Teilapparat: CNC
Achsen: 4
Spindelaufnahme ISO: 40
Tischfläche: 1200x508 mm
Tischbelastung: 600 kg
Steuerung: Fadal CNC 88 HS
Nummer:: 9505858
Drehzahl: 40-7500 U/min
Werkzeugwechsler: 21
Metal working and machine toolsMachining centersMachining centers horizontal
Nummer:: 012005057812Steuerung: Siemens Sinumerik 840Werkzeugwechsler: 24-fachAchsen: 3Sonstiges:: CPU ist defekt
Nummer:: 012005057812
Steuerung: Siemens Sinumerik 840
Werkzeugwechsler: 24-fach
Achsen: 3
Sonstiges:: CPU ist defekt
Steuerung: Siemens Sinumerik 840
Werkzeugwechsler: 24-fach
Achsen: 3
Sonstiges:: CPU ist defekt
10
Metal working and machine toolsSanding machinesSurface grinding machines
Schleiflänge: 1200 mmSchleifbreite: 600 mmWerkstückhöhe: mmSteuerung: mit Steuerung
Schleiflänge: 1200 mm
Schleifbreite: 600 mm
Werkstückhöhe: mm
Steuerung: mit Steuerung
Schleifbreite: 600 mm
Werkstückhöhe: mm
Steuerung: mit Steuerung
10
Metal working and machine toolsSheet metal working machinesPress brakes
Druck: 120 tAbkantlänge: . mmStänderweite: 2550 mmHub: 200 mmGesamtleistungsbedarf: kWBetriebsstunden: 2500 hMaschinengewicht ca.: 8,3 tRaumbedarf ca.: m
Druck: 120 t
Abkantlänge: . mm
Ständerweite: 2550 mm
Hub: 200 mm
Gesamtleistungsbedarf: kW
Betriebsstunden: 2500 h
Maschinengewicht ca.: 8,3 t
Raumbedarf ca.: m
Abkantlänge: . mm
Ständerweite: 2550 mm
Hub: 200 mm
Gesamtleistungsbedarf: kW
Betriebsstunden: 2500 h
Maschinengewicht ca.: 8,3 t
Raumbedarf ca.: m
10
Metal working and machine toolsLathesLathes
Drehdurchmesser über Bett: . mmDrehdurchmesser über Support: . mmDrehlänge: . mmDurchlass: 80 mmNummer:: 40 940-001Drehdurchmesser: 600 mmKoordinatenbereich: mit Koordinatenauszug mm
Drehdurchmesser über Bett: . mm
Drehdurchmesser über Support: . mm
Drehlänge: . mm
Durchlass: 80 mm
Nummer:: 40 940-001
Drehdurchmesser: 600 mm
Koordinatenbereich: mit Koordinatenauszug mm
Drehdurchmesser über Support: . mm
Drehlänge: . mm
Durchlass: 80 mm
Nummer:: 40 940-001
Drehdurchmesser: 600 mm
Koordinatenbereich: mit Koordinatenauszug mm
10
Metal working and machine toolsLathesLathes
Drehdurchmesser: 890 mmDrehlänge: 3000 mmDrehdurchmesser über Support: 550 mmSteuerung: Fagor 8055i ATCRevolver: 8Reitstock: MK 6Drehdurchmesser in der Kröpfung: 1220 mmLänge der Kröpfung: 450 mmSpindeldurchlass: 106 mmDrehzahl: 15-1480 U/minDreibackenfutter: 400 mmLünette: 300 mm
Drehdurchmesser: 890 mm
Drehlänge: 3000 mm
Drehdurchmesser über Support: 550 mm
Steuerung: Fagor 8055i ATC
Revolver: 8
Reitstock: MK 6
Drehdurchmesser in der Kröpfung: 1220 mm
Länge der Kröpfung: 450 mm
Spindeldurchlass: 106 mm
Drehzahl: 15-1480 U/min
Dreibackenfutter: 400 mm
Lünette: 300 mm
Drehlänge: 3000 mm
Drehdurchmesser über Support: 550 mm
Steuerung: Fagor 8055i ATC
Revolver: 8
Reitstock: MK 6
Drehdurchmesser in der Kröpfung: 1220 mm
Länge der Kröpfung: 450 mm
Spindeldurchlass: 106 mm
Drehzahl: 15-1480 U/min
Dreibackenfutter: 400 mm
Lünette: 300 mm
4
Food machinesContainers, shelves and tanks
NNP holding tank, Stainless, 200L holding tank, side bottom discharge, mobile
NNP holding tank, Stainless, 200L holding tank, side bottom discharge, mobile
11
Food machinesPackaging machinery
MG Tech Leanbox Case former, Serial: HO2859, 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph
MG Tech Leanbox Case former, Serial: HO2859, 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph
5
Food machinesCooling technologyRefrigerators
HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph
HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph
5
Food machinesCooling technologyRefrigerators
Galletti LCX082CSG Water chiller, Serial: 16701165, 2016, four fan system, adjustable temperature controls, see plate for all spec, 3Ph
Galletti LCX082CSG Water chiller, Serial: 16701165, 2016, four fan system, adjustable temperature controls, see plate for all spec, 3Ph
6
Food machinesPackaging machinery
Soco T10 Mini Mini Case taper, 2011, top and bottom case taper, side grip belts, comes with spare belts, min box with 60mm to max box width 280mm, max box height 500mm, with 2000mm outfeed roller conveyor, mobile, 3Ph
Soco T10 Mini Mini Case taper, 2011, top and bottom case taper, side grip belts, comes with spare belts, min box with 60mm to max box width 280mm, max box height 500mm, with 2000mm outfeed roller conveyor, mobile, 3Ph
8
Food machinesAccessories and spare parts
Cintex CS4000 Metal detector checkweigher, Stainless, combination metal detector checkweigher, belt dimensions 2100mm x 150mm, aperture 220mm x 100mm, weigh platform 350mm x 150mm, weight range 20g to 1Kg, pneumatic blow reject into reject bins, with spare belts, 1Ph
Cintex CS4000 Metal detector checkweigher, Stainless, combination metal detector checkweigher, belt dimensions 2100mm x 150mm, aperture 220mm x 100mm, weigh platform 350mm x 150mm, weight range 20g to 1Kg, pneumatic blow reject into reject bins, with spare belts, 1Ph
7
Food machinesOther
Polar Systems Vibratory conveyor, 2017, Stainless, vibratory conveyor, vibratory conveyor dimensions 1500mm x 300mm, adjustable vibration controls, 3Ph
Polar Systems Vibratory conveyor, 2017, Stainless, vibratory conveyor, vibratory conveyor dimensions 1500mm x 300mm, adjustable vibration controls, 3Ph
5
Food machinesPackaging machinery
Soco T10 Case taper, Serial: 17395T10, 2017, Top and bottom case taper, side grip belts, max box with 500mm, max box height 550mm, 3Ph
Soco T10 Case taper, Serial: 17395T10, 2017, Top and bottom case taper, side grip belts, max box with 500mm, max box height 550mm, 3Ph
4
Food machinesAccessories and spare parts
Digi DPS-800S Platform scale, Serial: 190282202, Stainless platform scale, touch screen controls, 0.001g to 30Kg, platform 600mm x 500mm, 1Ph
Digi DPS-800S Platform scale, Serial: 190282202, Stainless platform scale, touch screen controls, 0.001g to 30Kg, platform 600mm x 500mm, 1Ph
9
Food machinesPackaging machinery
Food Machinery Co E4230 VFFS bagger, 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph
Food Machinery Co E4230 VFFS bagger, 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph
6
Food machinesOther
NNP flighted elevator conveyor Stainless, variable speed, elevates from 200mm to 1000mm, belt width 450mm, mobile, 3Ph
NNP flighted elevator conveyor Stainless, variable speed, elevates from 200mm to 1000mm, belt width 450mm, mobile, 3Ph