Including stabilizer 1100mm

Including stabilizer 1100mm

Including stabilizer 1100mm

Including stabilizer 1100mm

Including stabilizer 1100mm

Including stabilizer 1100mm

Including stabilizer 1100mm

Single max 6650mm
Stair height max 3300mm
Including stabilization bar 700mm

Single max 6650mm
Stair height max 3300mm
Including stabilization bar 700mm

Single max 6650mm
Stair height max 3300mm
Including stabilization bar 700mm

Only maximum 4240mm

Saw blade diameter 210mm
Adjustable cutting angle
Adjustable cutting depth
3 m cable

Top 15mm steel
legs 140x70mm

<p>Including hoses</p>

Brushless motors
Collection tray
Including charger 220V
Including 1x battery max 40V 2.0ah

<p>Cutter diameter 300mm</p>

<p>air hose 15 meters with couplings 3/8"x 50, 300PSI. New in box</p>

<p>air hose 15 meters with couplings 3/8"x 50, 300PSI. New in box</p>

<p>Content tank 100 liters</p>

<p>Do not start</p>

Tank 24 liters

3x bottles of compressor oil
100 liter tank capacity

<p>3x bottle of compressor oil</p>
<p>100 liter tank capacity</p>

<p>3x bottle of compressor oil</p>
<p>100 liter tank capacity</p>

KRAUSS MAFFEI KM CX 420-4300

Number of operating hours: 37,589 hours

Screw diameter: 80 mm
Injection volume: 1810 cm3
Injection pressure: 2205 bar
Closing force: 420 T
Opening stroke: 1020 mm
Platform dimensions: 1270 x 1200 mm
Distance between columns: 800 x 800 mm
Maximum opening: 1400 mm
Hydraulic ejection stroke: 250 mm
Hydraulic ejection force: 95.4 KN

Oil tank capacity: 1075 L

BLOW MOULDING MACHINE KAUTEX KBS2 – 61/60


Year 1998
Tonnage: 60 tons
Tray dimensions: 700 x 1000 mm
Max mold height: 1250 mm
Max mold width: 800 mm
Minimum mold thickness: 620 mm
Max mold opening stroke: 675 mm
Screw diameter: 100 mm
L/D ratio: 20
Maximum extrudable weight in PE: 9000 Gr
Maximum injectable volume: 12 liters
Number of parison regulation points: 64
Die Min/max diameter: 100/230

Machine: DEMAG 650T
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg

Souflleuse MOB 20 litres

Type: MOB 20 liters
Year: 1990 redone in 2000
Passage between column: 425 x 400 mm
Minimum thickness: 210 mm
Opening stroke: 660 mm
Screw diameter: 80 mm – L/D: 25 mm
Parison: 14 points
1 core

Hz : 50
Brand : Hydrovane
Series : Série HV
Description : Hydrovane Hypac (Série HV)
Compressed air gas
Minimum pressure (Bar g) : 6
Min/Max pressure (Bar g) : 8 à 10
Engine power (kW) : 11
Noise level (DB) : 69
Lenght (millimètres) : 825
Width (millimètre) : 1135
Size (millimètres) : 1390
air exits (fingers) : 0.75
Weight (kilograms) : 412
Speed (T/MN) : 1450
Oil capacity (l) : 7
Cooling system : with air
Cleaned air (mg/m3) : <1
Air production = 1.74 m3/mins
Speed (rpm): 1450
Use pressure: 10 Bar g,
Air production = 1.5 m3/mins

Working hours : 32 385 hours
230v - 1 - 50 HZ - PE
Very good condition

SUMITOMO ELECTRICAL 75 TONS

- Year : 2000
- Type : SE75S
- In between columns : 360 x 360 mm
- Opening stroke : 300 mm
- Screw diameter :25 mm
- Injection volume : 56 cm3

-INJECTION UNIT:
Plasticising capacity: (PS) 50 gr/s
Screw speed: 250 rpm
Ration length diameter: 23 mm
Injection pressure: 2200 bar
Number of temperature zones: 4
Scew diametre: 52 mm
Maximum injection rate: 190 cc/s
Injection volume: 640 cm3
- CLOSING UNIT:

Plates dimensions: 870 x 790 mm
In between columns 570 x 510 mm
Thickness mould mini/max: 200 / 630 mm

COMMENTS:
NEGRI-BOSSI 210 T : Very good condition
Working Hour: 34808