6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
3
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 3100 mm
Sheet thickness (420 N/mm²): 3.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 4300 mm
Width: 1770 mm
Height: 1890 mm
Weight: 4520 kg
Bending length: 3100 mm
Sheet thickness (420 N/mm²): 3.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 4300 mm
Width: 1770 mm
Height: 1890 mm
Weight: 4520 kg
Sheet thickness (420 N/mm²): 3.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 4300 mm
Width: 1770 mm
Height: 1890 mm
Weight: 4520 kg
3
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 2540 mm
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3850 mm
Width: 1700 mm
Height: 1800 mm
Weight: 3400 kg
Bending length: 2540 mm
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3850 mm
Width: 1700 mm
Height: 1800 mm
Weight: 3400 kg
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3850 mm
Width: 1700 mm
Height: 1800 mm
Weight: 3400 kg
9
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 5200x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 360 mm
Cutting capacity 0° square: 360 mm
Cutting capacity 0° flat: 610x360 mm
Cutting capacity 30°: rund 360 mm, quadrat 360 mm, rechteck 570 x 360 mm
Cutting capacity 45°: rund 360 mm, quadrat 360 mm, rechteck 450 x 360 mm
Cutting capacity 60°: rund 325 mm, quadrat 290 mm, rechteck 280 x 360 mm
Working height: 735 mm
Hydraulic motor: 1.5 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 2250 mm
Height: 1870 mm
Weight: 2400 kg
Saw frame: Double column
Band dimensions: 5200x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 360 mm
Cutting capacity 0° square: 360 mm
Cutting capacity 0° flat: 610x360 mm
Cutting capacity 30°: rund 360 mm, quadrat 360 mm, rechteck 570 x 360 mm
Cutting capacity 45°: rund 360 mm, quadrat 360 mm, rechteck 450 x 360 mm
Cutting capacity 60°: rund 325 mm, quadrat 290 mm, rechteck 280 x 360 mm
Working height: 735 mm
Hydraulic motor: 1.5 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 2250 mm
Height: 1870 mm
Weight: 2400 kg
Band dimensions: 5200x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 360 mm
Cutting capacity 0° square: 360 mm
Cutting capacity 0° flat: 610x360 mm
Cutting capacity 30°: rund 360 mm, quadrat 360 mm, rechteck 570 x 360 mm
Cutting capacity 45°: rund 360 mm, quadrat 360 mm, rechteck 450 x 360 mm
Cutting capacity 60°: rund 325 mm, quadrat 290 mm, rechteck 280 x 360 mm
Working height: 735 mm
Hydraulic motor: 1.5 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 2250 mm
Height: 1870 mm
Weight: 2400 kg
2
Metal working and machine toolsLathes
Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
4
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 10 mm
Taper: B 16
Distance spindle - column: 180 mm
Revs: 250 - 3000 r.p.m.
Motor: 0,45 (230V) kW
Quill travel: 50 mm
Distance spindle - table: 105 - 245 mm
Table: 300 x 200 mm
Column diameter: 50 mm
Length: 400 mm
Width: 248 mm
Height: 460 mm
Weight: 30 kg
Drilling capacy mild steel: 10 mm
Taper: B 16
Distance spindle - column: 180 mm
Revs: 250 - 3000 r.p.m.
Motor: 0,45 (230V) kW
Quill travel: 50 mm
Distance spindle - table: 105 - 245 mm
Table: 300 x 200 mm
Column diameter: 50 mm
Length: 400 mm
Width: 248 mm
Height: 460 mm
Weight: 30 kg
Taper: B 16
Distance spindle - column: 180 mm
Revs: 250 - 3000 r.p.m.
Motor: 0,45 (230V) kW
Quill travel: 50 mm
Distance spindle - table: 105 - 245 mm
Table: 300 x 200 mm
Column diameter: 50 mm
Length: 400 mm
Width: 248 mm
Height: 460 mm
Weight: 30 kg
4
Metal working and machine toolsSheet metal working machinesFeed straighteners
Coil weight: 500 kg
Coil outer diameter: 1200 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 550
Max. coil width: 300 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Motor: 0.55 kW
Length: 1400 mm
Width: 1200 mm
Height: 1550 mm
Weight: 190 kg
Coil weight: 500 kg
Coil outer diameter: 1200 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 550
Max. coil width: 300 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Motor: 0.55 kW
Length: 1400 mm
Width: 1200 mm
Height: 1550 mm
Weight: 190 kg
Coil outer diameter: 1200 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 550
Max. coil width: 300 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Motor: 0.55 kW
Length: 1400 mm
Width: 1200 mm
Height: 1550 mm
Weight: 190 kg
4
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18643
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
Ref. no.: 18643
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
3
Metal working and machine toolsPressesWorkshop press
pressing capacity: 20 to
Cylinder fix or moveable: fix
Daylight: 825 mm
Distance between columns: 520 mm
Length: 1150 mm
Width: 500 mm
Height: 1800 (PSS: 1950) mm
pressing capacity: 20 to
Cylinder fix or moveable: fix
Daylight: 825 mm
Distance between columns: 520 mm
Length: 1150 mm
Width: 500 mm
Height: 1800 (PSS: 1950) mm
Cylinder fix or moveable: fix
Daylight: 825 mm
Distance between columns: 520 mm
Length: 1150 mm
Width: 500 mm
Height: 1800 (PSS: 1950) mm
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
15
Metal working and machine toolsSanding machinesSurface grinding machines
ELB - SWN 5 VA II Flachschleifmaschine
-Schleifbereich X/Y/Z 525x375x255mm
-Magnetplatte 700x300mm
-Tischaufspannfläche 900x250mm
-Tischlängshub 10-625mm
-Tischbelastung max. 280Kg
-Tischvorschub 1-30 m/min
-Pendelschleifen 3-30 m/min
-Abstand - Tisch bis Spindelmitte 525mm
-Vertikal Vorschubgeschwindigkeit 2-180 mm/min
-Zustellgröße - regelbar 0,001-2mm
-Schleifscheibendrehzahl 3000 U/min
-Kühlmitteleinrichtung
-Maschinenfüße
-Dokumentation
-KOMPLETTE TECHNISCHE DATEN SIEHE FOTOS
Abmaße:
LxBxH 2,7x2,2x2 Meter / Gewicht 3500Kg
ELB - SWN 5 VA II Flachschleifmaschine
-Schleifbereich X/Y/Z 525x375x255mm
-Magnetplatte 700x300mm
-Tischaufspannfläche 900x250mm
-Tischlängshub 10-625mm
-Tischbelastung max. 280Kg
-Tischvorschub 1-30 m/min
-Pendelschleifen 3-30 m/min
-Abstand - Tisch bis Spindelmitte 525mm
-Vertikal Vorschubgeschwindigkeit 2-180 mm/min
-Zustellgröße - regelbar 0,001-2mm
-Schleifscheibendrehzahl 3000 U/min
-Kühlmitteleinrichtung
-Maschinenfüße
-Dokumentation
-KOMPLETTE TECHNISCHE DATEN SIEHE FOTOS
Abmaße:
LxBxH 2,7x2,2x2 Meter / Gewicht 3500Kg
-Schleifbereich X/Y/Z 525x375x255mm
-Magnetplatte 700x300mm
-Tischaufspannfläche 900x250mm
-Tischlängshub 10-625mm
-Tischbelastung max. 280Kg
-Tischvorschub 1-30 m/min
-Pendelschleifen 3-30 m/min
-Abstand - Tisch bis Spindelmitte 525mm
-Vertikal Vorschubgeschwindigkeit 2-180 mm/min
-Zustellgröße - regelbar 0,001-2mm
-Schleifscheibendrehzahl 3000 U/min
-Kühlmitteleinrichtung
-Maschinenfüße
-Dokumentation
-KOMPLETTE TECHNISCHE DATEN SIEHE FOTOS
Abmaße:
LxBxH 2,7x2,2x2 Meter / Gewicht 3500Kg
5
Metal working and machine toolsCutting machines and equipmentLaser cutting machines
Laser power: 3 kW
Manual table / shuttle table: Manual table
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 8 mm
Max. thickness - aluminium: 8 mm
Max. Application Range - Copper: 5 mm
Max. Application Range - Brass: 8 mm
Cutting area: 3.048 x 1.530 mm
X-axis: 3048 mm
Y-axis: 1530 mm
Z-Axis: 125 mm
Max. Sheet size: 3.048 x 1.524 mm
Max. sheet weight: 127 kg/m²
Max speed x-axes: 90 m/min
Max speed y-axes: 90 m/min
Max. speed simultaneous: 127 m/min
Max. acceleration: 14 m/s²
Positioning accuracy: +/- 0,05 mm
Repeat accuracy: +/- 0,05 mm
Total space length U: 5310 mm
Total space width G: 2810 mm
Height: 1860 mm
Weight: 6600 kg
Laser power: 3 kW
Manual table / shuttle table: Manual table
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 8 mm
Max. thickness - aluminium: 8 mm
Max. Application Range - Copper: 5 mm
Max. Application Range - Brass: 8 mm
Cutting area: 3.048 x 1.530 mm
X-axis: 3048 mm
Y-axis: 1530 mm
Z-Axis: 125 mm
Max. Sheet size: 3.048 x 1.524 mm
Max. sheet weight: 127 kg/m²
Max speed x-axes: 90 m/min
Max speed y-axes: 90 m/min
Max. speed simultaneous: 127 m/min
Max. acceleration: 14 m/s²
Positioning accuracy: +/- 0,05 mm
Repeat accuracy: +/- 0,05 mm
Total space length U: 5310 mm
Total space width G: 2810 mm
Height: 1860 mm
Weight: 6600 kg
Manual table / shuttle table: Manual table
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 8 mm
Max. thickness - aluminium: 8 mm
Max. Application Range - Copper: 5 mm
Max. Application Range - Brass: 8 mm
Cutting area: 3.048 x 1.530 mm
X-axis: 3048 mm
Y-axis: 1530 mm
Z-Axis: 125 mm
Max. Sheet size: 3.048 x 1.524 mm
Max. sheet weight: 127 kg/m²
Max speed x-axes: 90 m/min
Max speed y-axes: 90 m/min
Max. speed simultaneous: 127 m/min
Max. acceleration: 14 m/s²
Positioning accuracy: +/- 0,05 mm
Repeat accuracy: +/- 0,05 mm
Total space length U: 5310 mm
Total space width G: 2810 mm
Height: 1860 mm
Weight: 6600 kg
5
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 18 mm
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Feeds: manual mm/r
Column diameter: 82 mm
Distance spindle - table: 180 - 870 mm
Table: 340 x 280 mm
Quill travel: 100 mm
Length: 705 mm
Width: 355 mm
Height: 1825 mm
Weight: 195 kg
Drilling capacy mild steel: 18 mm
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Feeds: manual mm/r
Column diameter: 82 mm
Distance spindle - table: 180 - 870 mm
Table: 340 x 280 mm
Quill travel: 100 mm
Length: 705 mm
Width: 355 mm
Height: 1825 mm
Weight: 195 kg
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Feeds: manual mm/r
Column diameter: 82 mm
Distance spindle - table: 180 - 870 mm
Table: 340 x 280 mm
Quill travel: 100 mm
Length: 705 mm
Width: 355 mm
Height: 1825 mm
Weight: 195 kg
4
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 30 mm
Taper: MK 3
Distance spindle - column: 300 mm
Revs: 0 - 4000 r.p.m.
Motor: 3 kW
Tapping capacity: M30x3,5
Feeds: 0,10 / 0,16 / 0,25 mm/r
Column diameter: 125 mm
Distance spindle - table: 150 - 700 mm
Table: 590 x 450 mm
Quill travel: 125 mm
Length: 900 mm
Width: 610 mm
Height: 1980 mm
Weight: 385 kg
Drilling capacy mild steel: 30 mm
Taper: MK 3
Distance spindle - column: 300 mm
Revs: 0 - 4000 r.p.m.
Motor: 3 kW
Tapping capacity: M30x3,5
Feeds: 0,10 / 0,16 / 0,25 mm/r
Column diameter: 125 mm
Distance spindle - table: 150 - 700 mm
Table: 590 x 450 mm
Quill travel: 125 mm
Length: 900 mm
Width: 610 mm
Height: 1980 mm
Weight: 385 kg
Taper: MK 3
Distance spindle - column: 300 mm
Revs: 0 - 4000 r.p.m.
Motor: 3 kW
Tapping capacity: M30x3,5
Feeds: 0,10 / 0,16 / 0,25 mm/r
Column diameter: 125 mm
Distance spindle - table: 150 - 700 mm
Table: 590 x 450 mm
Quill travel: 125 mm
Length: 900 mm
Width: 610 mm
Height: 1980 mm
Weight: 385 kg
7
Metal working and machine toolsSawingBelt saws
Saw frame: Pivot frame
Band dimensions: 3120 x 27 x 0,9 mm
Band speed continous: 15 - 101 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 310 x 240 mm
Cutting capacity 45°: round 230 mm, square 230 mm, rectangular 230x230 mm
Cutting capacity 60°: round 140 mm, square 140 mm, rectangular 140x140 mm
Cutting capacity - 45°: round 200 mm, square 170 mm, rectangular 220x100 mm
Min. rest piece length: 240 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Motor: 1 kW
Coolant pump motor: 0.12 kW
Torque feeding carriage motor: 1.95 Nm
Torque motor for automatic bow rotation: 1.95 Nm
Length: 5150 mm
Width: 3200 mm
Height: 1950 mm
Transport dimensions: 5000 x 2200 x 1900 mm
Weight: 2150 kg
Saw frame: Pivot frame
Band dimensions: 3120 x 27 x 0,9 mm
Band speed continous: 15 - 101 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 310 x 240 mm
Cutting capacity 45°: round 230 mm, square 230 mm, rectangular 230x230 mm
Cutting capacity 60°: round 140 mm, square 140 mm, rectangular 140x140 mm
Cutting capacity - 45°: round 200 mm, square 170 mm, rectangular 220x100 mm
Min. rest piece length: 240 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Motor: 1 kW
Coolant pump motor: 0.12 kW
Torque feeding carriage motor: 1.95 Nm
Torque motor for automatic bow rotation: 1.95 Nm
Length: 5150 mm
Width: 3200 mm
Height: 1950 mm
Transport dimensions: 5000 x 2200 x 1900 mm
Weight: 2150 kg
Band dimensions: 3120 x 27 x 0,9 mm
Band speed continous: 15 - 101 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 310 x 240 mm
Cutting capacity 45°: round 230 mm, square 230 mm, rectangular 230x230 mm
Cutting capacity 60°: round 140 mm, square 140 mm, rectangular 140x140 mm
Cutting capacity - 45°: round 200 mm, square 170 mm, rectangular 220x100 mm
Min. rest piece length: 240 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Motor: 1 kW
Coolant pump motor: 0.12 kW
Torque feeding carriage motor: 1.95 Nm
Torque motor for automatic bow rotation: 1.95 Nm
Length: 5150 mm
Width: 3200 mm
Height: 1950 mm
Transport dimensions: 5000 x 2200 x 1900 mm
Weight: 2150 kg
3
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18565
Hersteller: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
Ref. no.: 18565
Hersteller: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
Hersteller: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
5
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 5200x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 650x460 mm
Cutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3100 mm
Width: 1000 mm
Height: 1800 mm
Weight: 1520 kg
Saw frame: Double column
Band dimensions: 5200x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 650x460 mm
Cutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3100 mm
Width: 1000 mm
Height: 1800 mm
Weight: 1520 kg
Band dimensions: 5200x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 650x460 mm
Cutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3100 mm
Width: 1000 mm
Height: 1800 mm
Weight: 1520 kg
6
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 6300x41x1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 440 mm
Cutting capacity 0° square: 440 mm
Cutting capacity 0° flat: 640 x 440 mm
Cutting capacity 45°: round 440 mm, rectangular 400 x 440 mm, square 400 mm
Cutting capacity 60°: round 250 mm, rectangular 250 x 440 mm, square 250mm
Cutting capacity - 45°: round 390 mm, rectangular 390 x 440 mm, square 390 mm
Working height: 860 mm
Hydraulic motor: 1.1 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3150 mm
Width: 1850 mm
Height: 2115 mm
Weight: 2050 kg
Saw frame: Double column
Band dimensions: 6300x41x1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 440 mm
Cutting capacity 0° square: 440 mm
Cutting capacity 0° flat: 640 x 440 mm
Cutting capacity 45°: round 440 mm, rectangular 400 x 440 mm, square 400 mm
Cutting capacity 60°: round 250 mm, rectangular 250 x 440 mm, square 250mm
Cutting capacity - 45°: round 390 mm, rectangular 390 x 440 mm, square 390 mm
Working height: 860 mm
Hydraulic motor: 1.1 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3150 mm
Width: 1850 mm
Height: 2115 mm
Weight: 2050 kg
Band dimensions: 6300x41x1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 440 mm
Cutting capacity 0° square: 440 mm
Cutting capacity 0° flat: 640 x 440 mm
Cutting capacity 45°: round 440 mm, rectangular 400 x 440 mm, square 400 mm
Cutting capacity 60°: round 250 mm, rectangular 250 x 440 mm, square 250mm
Cutting capacity - 45°: round 390 mm, rectangular 390 x 440 mm, square 390 mm
Working height: 860 mm
Hydraulic motor: 1.1 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3150 mm
Width: 1850 mm
Height: 2115 mm
Weight: 2050 kg
6
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 4800x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 380 mm
Cutting capacity 0° square: 380 mm
Cutting capacity 0° flat: 520x380 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 380 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 930 mm
Height: 1660 mm
Weight: 1330 kg
Saw frame: Double column
Band dimensions: 4800x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 380 mm
Cutting capacity 0° square: 380 mm
Cutting capacity 0° flat: 520x380 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 380 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 930 mm
Height: 1660 mm
Weight: 1330 kg
Band dimensions: 4800x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 380 mm
Cutting capacity 0° square: 380 mm
Cutting capacity 0° flat: 520x380 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 380 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 930 mm
Height: 1660 mm
Weight: 1330 kg
2
Metal working and machine toolsSheet metal working machinesBending machines
Bending length: 350 - 2800 mm
Max. sheet length: 3050 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 500 to
Pressure force: 1000 to
Sheet thickness (420 N/mm²): 3.2 mm
Sheet thickness (600 N/mm²): 2.2 mm
Sheet thickness (260 N/mm²): 4 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
Bending length: 350 - 2800 mm
Max. sheet length: 3050 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 500 to
Pressure force: 1000 to
Sheet thickness (420 N/mm²): 3.2 mm
Sheet thickness (600 N/mm²): 2.2 mm
Sheet thickness (260 N/mm²): 4 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
Max. sheet length: 3050 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 500 to
Pressure force: 1000 to
Sheet thickness (420 N/mm²): 3.2 mm
Sheet thickness (600 N/mm²): 2.2 mm
Sheet thickness (260 N/mm²): 4 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
2
Metal working and machine toolsSheet metal working machines
Suitable for plates: 1
Max. bevel width: 66 mm
Bevel angle: 60 °
Spindle speed (load-free): 300-800 rpm
Feed speed: 0 - 1,2 mm/min
Max. cutting depth: 6 mm
Motor: 6.5 kW
Length: 1179 mm
Width: 853 mm
Height: 1524 mm
Weight: 320 kg
Suitable for plates: 1
Max. bevel width: 66 mm
Bevel angle: 60 °
Spindle speed (load-free): 300-800 rpm
Feed speed: 0 - 1,2 mm/min
Max. cutting depth: 6 mm
Motor: 6.5 kW
Length: 1179 mm
Width: 853 mm
Height: 1524 mm
Weight: 320 kg
Max. bevel width: 66 mm
Bevel angle: 60 °
Spindle speed (load-free): 300-800 rpm
Feed speed: 0 - 1,2 mm/min
Max. cutting depth: 6 mm
Motor: 6.5 kW
Length: 1179 mm
Width: 853 mm
Height: 1524 mm
Weight: 320 kg
1
Metal working and machine toolsSheet metal working machines
Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 21 mm
Bevel angle: 60 °
Spindle speed (load-free): 2820 rpm
Motor: 1.1 kW
Weight: 20 kg
Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 21 mm
Bevel angle: 60 °
Spindle speed (load-free): 2820 rpm
Motor: 1.1 kW
Weight: 20 kg
Suitable for tubes: 1
Max. bevel width: 21 mm
Bevel angle: 60 °
Spindle speed (load-free): 2820 rpm
Motor: 1.1 kW
Weight: 20 kg
1
Metal working and machine toolsSheet metal working machines
Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 18 mm
Bevel angle: 60 °
Bevel radius: 2-5 mm
Spindle speed (load-free): 1800-5850 rpm
Min. diameter of bevel: 40 mm
Motor: 2.2 kW
Length: 585 mm
Width: 156 mm
Height: 238 mm
Weight: 10 kg
Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 18 mm
Bevel angle: 60 °
Bevel radius: 2-5 mm
Spindle speed (load-free): 1800-5850 rpm
Min. diameter of bevel: 40 mm
Motor: 2.2 kW
Length: 585 mm
Width: 156 mm
Height: 238 mm
Weight: 10 kg
Suitable for tubes: 1
Max. bevel width: 18 mm
Bevel angle: 60 °
Bevel radius: 2-5 mm
Spindle speed (load-free): 1800-5850 rpm
Min. diameter of bevel: 40 mm
Motor: 2.2 kW
Length: 585 mm
Width: 156 mm
Height: 238 mm
Weight: 10 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1530 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 12 mm
Strokes: 7 1/min
Cutting angle: 3 °
Number of downholders: 8 pcs.
Back gauge: 500 mm
Motor power: 22.5 kW
Oiltank: 250 l
Table height: 950 mm
Length: 2350 mm
Width: 1400 mm
Height: 2000 mm
Weight: 5200 kg
Cutting length: 1530 mm
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 12 mm
Strokes: 7 1/min
Cutting angle: 3 °
Number of downholders: 8 pcs.
Back gauge: 500 mm
Motor power: 22.5 kW
Oiltank: 250 l
Table height: 950 mm
Length: 2350 mm
Width: 1400 mm
Height: 2000 mm
Weight: 5200 kg
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 12 mm
Strokes: 7 1/min
Cutting angle: 3 °
Number of downholders: 8 pcs.
Back gauge: 500 mm
Motor power: 22.5 kW
Oiltank: 250 l
Table height: 950 mm
Length: 2350 mm
Width: 1400 mm
Height: 2000 mm
Weight: 5200 kg
8
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18591
Hersteller: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Ref. no.: 18591
Hersteller: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Hersteller: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
10
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18494
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
Ref. no.: 18494
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
6
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18589
Hersteller: NETSTAL
Year of construction: 2015
Clamping unit
Clamping force: 175 ton
Opening stroke: 450 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 500 mm
Mould height max.: 800 mm
Platen size (h x v): 830 x 845 mm
Injection unit
Screw diameter: 40 mm
Injection volume: 201 cm³
Shot weight: 193 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 7,1x2,2x2,0 m
Machine weight: 12750 kg
Ref. no.: 18589
Hersteller: NETSTAL
Year of construction: 2015
Clamping unit
Clamping force: 175 ton
Opening stroke: 450 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 500 mm
Mould height max.: 800 mm
Platen size (h x v): 830 x 845 mm
Injection unit
Screw diameter: 40 mm
Injection volume: 201 cm³
Shot weight: 193 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 7,1x2,2x2,0 m
Machine weight: 12750 kg
Hersteller: NETSTAL
Year of construction: 2015
Clamping unit
Clamping force: 175 ton
Opening stroke: 450 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 500 mm
Mould height max.: 800 mm
Platen size (h x v): 830 x 845 mm
Injection unit
Screw diameter: 40 mm
Injection volume: 201 cm³
Shot weight: 193 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 7,1x2,2x2,0 m
Machine weight: 12750 kg
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18588
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
Ref. no.: 18588
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
8
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 30 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: Stufe 1: 125 - 4000, Stufe 2: 250 - 4000 r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
Feeds: 0 - 300 mm/r
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 820 mm
Width: 520 mm
Height: 1900 mm
Weight: 320 kg
Drilling capacy mild steel: 30 mm
Taper: MK 3
Distance spindle - column: 280 mm
Revs: Stufe 1: 125 - 4000, Stufe 2: 250 - 4000 r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
Feeds: 0 - 300 mm/r
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 820 mm
Width: 520 mm
Height: 1900 mm
Weight: 320 kg
Taper: MK 3
Distance spindle - column: 280 mm
Revs: Stufe 1: 125 - 4000, Stufe 2: 250 - 4000 r.p.m.
Motor: 0,9 / 1,45 kW
Tapping capacity: M20
Feeds: 0 - 300 mm/r
Distance spindle - table: 240 - 790 mm
Table: 420 x 340 mm
Quill travel: 125 mm
Length: 820 mm
Width: 520 mm
Height: 1900 mm
Weight: 320 kg
4
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 13 mm
Taper: MK 2
Distance spindle - column: 220 mm
Revs: 40 - 4000 r.p.m.
Motor: 0,54 (230 V, frequency controlled) kW
Tapping capacity: M 10 (depends on gradient)
Quill travel: 60 mm
Distance spindle - table: 85 - 370 mm
Distance spindle-base: 420 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 520 mm
Width: 400 mm
Height: 850 mm
Weight: 62 kg
Drilling capacy mild steel: 13 mm
Taper: MK 2
Distance spindle - column: 220 mm
Revs: 40 - 4000 r.p.m.
Motor: 0,54 (230 V, frequency controlled) kW
Tapping capacity: M 10 (depends on gradient)
Quill travel: 60 mm
Distance spindle - table: 85 - 370 mm
Distance spindle-base: 420 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 520 mm
Width: 400 mm
Height: 850 mm
Weight: 62 kg
Taper: MK 2
Distance spindle - column: 220 mm
Revs: 40 - 4000 r.p.m.
Motor: 0,54 (230 V, frequency controlled) kW
Tapping capacity: M 10 (depends on gradient)
Quill travel: 60 mm
Distance spindle - table: 85 - 370 mm
Distance spindle-base: 420 mm
Table: 300 x 250 mm
Column diameter: 70 mm
Length: 520 mm
Width: 400 mm
Height: 850 mm
Weight: 62 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 2050 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 750 mm
Motor power: 3 kW
Table height: 800 mm
Table width: 520 mm
Length: 2720 mm
Width: 1575 mm
Height: 1230 mm
Weight: 1900 kg
Cutting length: 2050 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 750 mm
Motor power: 3 kW
Table height: 800 mm
Table width: 520 mm
Length: 2720 mm
Width: 1575 mm
Height: 1230 mm
Weight: 1900 kg
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 750 mm
Motor power: 3 kW
Table height: 800 mm
Table width: 520 mm
Length: 2720 mm
Width: 1575 mm
Height: 1230 mm
Weight: 1900 kg
Metal working and machine toolsSheet metal working machinesPipe-bending machines
Rohrdurchmesser: . mmWandstärke: 15 St52 und Edelstahl mmBiegeradius min.: 6-120 mmBiegewinkel max.: 150 °Maschinengewicht ca.: 1,7 KgRaumbedarf ca.: 2000x2000x1300 m
Rohrdurchmesser: . mm
Wandstärke: 15 St52 und Edelstahl mm
Biegeradius min.: 6-120 mm
Biegewinkel max.: 150 °
Maschinengewicht ca.: 1,7 Kg
Raumbedarf ca.: 2000x2000x1300 m
Wandstärke: 15 St52 und Edelstahl mm
Biegeradius min.: 6-120 mm
Biegewinkel max.: 150 °
Maschinengewicht ca.: 1,7 Kg
Raumbedarf ca.: 2000x2000x1300 m
7
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 42 mm
Taper: MK 4
Distance spindle - column: 280 – 1.100 mm
Revs: 44 – 1.500 (12) r.p.m.
Tapping capacity: Steel: M 25, Cast Iron: M 38
Distance table - spindle underside: 470 – 1.270 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 2.2 kW
Column diameter: 260 mm
Quill travel: 280 mm
Table: 1.725 x 715 x 180 mm
Box table dimensions: 635 x 520 x 415 mm
max. height: 2530 mm
Length: 1880 mm
Width: 870 mm
Height: 2210 mm
Weight: 1800 kg
Drilling capacy mild steel: 42 mm
Taper: MK 4
Distance spindle - column: 280 – 1.100 mm
Revs: 44 – 1.500 (12) r.p.m.
Tapping capacity: Steel: M 25, Cast Iron: M 38
Distance table - spindle underside: 470 – 1.270 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 2.2 kW
Column diameter: 260 mm
Quill travel: 280 mm
Table: 1.725 x 715 x 180 mm
Box table dimensions: 635 x 520 x 415 mm
max. height: 2530 mm
Length: 1880 mm
Width: 870 mm
Height: 2210 mm
Weight: 1800 kg
Taper: MK 4
Distance spindle - column: 280 – 1.100 mm
Revs: 44 – 1.500 (12) r.p.m.
Tapping capacity: Steel: M 25, Cast Iron: M 38
Distance table - spindle underside: 470 – 1.270 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 2.2 kW
Column diameter: 260 mm
Quill travel: 280 mm
Table: 1.725 x 715 x 180 mm
Box table dimensions: 635 x 520 x 415 mm
max. height: 2530 mm
Length: 1880 mm
Width: 870 mm
Height: 2210 mm
Weight: 1800 kg
1
Food machinesBeverage productionPumps
Fristam RPE752 Centrifugal pump, 2018, Stainless centrifugal pump, 2900 RPM, 11Kw, impeller diameter 200mm, 3Ph
Fristam RPE752 Centrifugal pump, 2018, Stainless centrifugal pump, 2900 RPM, 11Kw, impeller diameter 200mm, 3Ph
12
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18587
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 416 cm³
Shot weight: 375 g
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Ref. no.: 18587
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 416 cm³
Shot weight: 375 g
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 416 cm³
Shot weight: 375 g
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18586
Hersteller: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 450 mm
Distance between tie bars: 560 x 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Opening width: 1050 mm
Platen size (h x v): 790 x 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,10 x 1,90 x 2,10 m
Machine weight: 8400 kg
Robot
Producer: Krauss Maffei
Type: LRX-100
Year: 2012
Ref. no.: 18586
Hersteller: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 450 mm
Distance between tie bars: 560 x 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Opening width: 1050 mm
Platen size (h x v): 790 x 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,10 x 1,90 x 2,10 m
Machine weight: 8400 kg
Robot
Producer: Krauss Maffei
Type: LRX-100
Year: 2012
Hersteller: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 450 mm
Distance between tie bars: 560 x 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Opening width: 1050 mm
Platen size (h x v): 790 x 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,10 x 1,90 x 2,10 m
Machine weight: 8400 kg
Robot
Producer: Krauss Maffei
Type: LRX-100
Year: 2012
5
Food machinesOther
Spirotech screw conveyor, 2018, Stainless screw conveyor, 50Kg hopper, screw diameter 300mm, screw length 2300mm, 2.2Kw, 3Ph
Spirotech screw conveyor, 2018, Stainless screw conveyor, 50Kg hopper, screw diameter 300mm, screw length 2300mm, 2.2Kw, 3Ph
Metal working and machine toolsMachining centersMachining centers horizontal
Nummer:: 012005057812Steuerung: Siemens Sinumerik 840Werkzeugwechsler: 24-fachAchsen: 3Sonstiges:: CPU ist defekt
Nummer:: 012005057812
Steuerung: Siemens Sinumerik 840
Werkzeugwechsler: 24-fach
Achsen: 3
Sonstiges:: CPU ist defekt
Steuerung: Siemens Sinumerik 840
Werkzeugwechsler: 24-fach
Achsen: 3
Sonstiges:: CPU ist defekt
Temperatur max.: 1150 GradGröße der Öffnung: . mmTiefe der Kammer: . mm
Temperatur max.: 1150 Grad
Größe der Öffnung: . mm
Tiefe der Kammer: . mm
Größe der Öffnung: . mm
Tiefe der Kammer: . mm
8
Food machinesAccessories and spare parts
Logopak 410 IIIF Labeller, Serial: LP10021552, Logopak print and apply labeller, mounted on variable speed conveyor, conveyor 700mm x 300mm, previously used on labels 100mm x 60mm,
Logopak 410 IIIF Labeller, Serial: LP10021552, Logopak print and apply labeller, mounted on variable speed conveyor, conveyor 700mm x 300mm, previously used on labels 100mm x 60mm,
5
Metal working and machine toolsSheet metal working machinesPlasma cutting machines
Working area: 3020 x 1520 mm
Plasma source: Kjellberg Smart Focus 300
Max. thickness - mild steel: 80 mm
Max. piercing thickness - mild steel: 40 mm
Recommended thickness (unalloyed steel):: 60 mm
Current: 300 A
Current / power-on time: 100 % A
Positioning speed: 24 m/min
Repeat accuracy: < 1/10 mm
Max. weight on table: 400 kg/m²
Working area: 3020 x 1520 mm
Plasma source: Kjellberg Smart Focus 300
Max. thickness - mild steel: 80 mm
Max. piercing thickness - mild steel: 40 mm
Recommended thickness (unalloyed steel):: 60 mm
Current: 300 A
Current / power-on time: 100 % A
Positioning speed: 24 m/min
Repeat accuracy: < 1/10 mm
Max. weight on table: 400 kg/m²
Plasma source: Kjellberg Smart Focus 300
Max. thickness - mild steel: 80 mm
Max. piercing thickness - mild steel: 40 mm
Recommended thickness (unalloyed steel):: 60 mm
Current: 300 A
Current / power-on time: 100 % A
Positioning speed: 24 m/min
Repeat accuracy: < 1/10 mm
Max. weight on table: 400 kg/m²
6
Food machinesBakery-, pastry equipmentCutting machines
Food Tools CS4AAC round cake slicer, Serial: 5253, 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with three cutting inserts and spare blade, mobile
Food Tools CS4AAC round cake slicer, Serial: 5253, 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with three cutting inserts and spare blade, mobile
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
 (1)_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
12
Metal working and machine toolsLathesCenter lathes and spindle lathes
Leit u. Zugspindeldrehmaschine "DREHMA - D410x1500mm-Vorführmaschine - Bj 2025-CE - Kennung-Digitalanzeige-Drehdurchmesser über Bett 410mm-Drehlänge 1500mm-Drehdurchmesser über Support 255mm-Drehdurchmesser in der Kröpfung 580mm-Spindeldurchlass 52mm-Drehzahlbereich 45-1800 U/minCsbr T Iowatv Ss Ewyogr-Automatische Längs / Planvorschübe-Gewinde / Zoll / Metrisch etc.-Reitstock Mk4-Zentralschmierung-Antriebsleistung 3,5 KW-Feste / Mitlaufende Lünette-Multifixhalter mit 4xEinsätzen-Dreibackenfutter 200mm-Vierbackenfutter 250mm-Planscheibe-Futterschutz-Frontarbeitsschutzeinrichtung-Kühlmitteleinrichtung-Arbeitsleuchte-Mitlaufende Spitze-MaschinenfüßeAbmaße:LxBxH 2,5x1x1,6 Meter / Gewicht 1800Kg
Leit u. Zugspindeldrehmaschine "DREHMA - D410x1500mm
-Vorführmaschine - Bj 2025
-CE - Kennung
-Digitalanzeige
-Drehdurchmesser über Bett 410mm
-Drehlänge 1500mm
-Drehdurchmesser über Support 255mm
-Drehdurchmesser in der Kröpfung 580mm
-Spindeldurchlass 52mm
-Drehzahlbereich 45-1800 U/min
Csbr T Iowatv Ss Ewyogr
-Automatische Längs / Planvorschübe
-Gewinde / Zoll / Metrisch etc.
-Reitstock Mk4
-Zentralschmierung
-Antriebsleistung 3,5 KW
-Feste / Mitlaufende Lünette
-Multifixhalter mit 4xEinsätzen
-Dreibackenfutter 200mm
-Vierbackenfutter 250mm
-Planscheibe
-Futterschutz
-Frontarbeitsschutzeinrichtung
-Kühlmitteleinrichtung
-Arbeitsleuchte
-Mitlaufende Spitze
-Maschinenfüße
Abmaße:
LxBxH 2,5x1x1,6 Meter / Gewicht 1800Kg
-Vorführmaschine - Bj 2025
-CE - Kennung
-Digitalanzeige
-Drehdurchmesser über Bett 410mm
-Drehlänge 1500mm
-Drehdurchmesser über Support 255mm
-Drehdurchmesser in der Kröpfung 580mm
-Spindeldurchlass 52mm
-Drehzahlbereich 45-1800 U/min
Csbr T Iowatv Ss Ewyogr
-Automatische Längs / Planvorschübe
-Gewinde / Zoll / Metrisch etc.
-Reitstock Mk4
-Zentralschmierung
-Antriebsleistung 3,5 KW
-Feste / Mitlaufende Lünette
-Multifixhalter mit 4xEinsätzen
-Dreibackenfutter 200mm
-Vierbackenfutter 250mm
-Planscheibe
-Futterschutz
-Frontarbeitsschutzeinrichtung
-Kühlmitteleinrichtung
-Arbeitsleuchte
-Mitlaufende Spitze
-Maschinenfüße
Abmaße:
LxBxH 2,5x1x1,6 Meter / Gewicht 1800Kg
8
Metal working and machine toolsLathesCenter lathes and spindle lathes
Drehdurchmesser über Bett: 520 mmDrehdurchmesser über Support: 340 mmDrehlänge: 1000 mmSpindelbohrung: 55 mmPlanscheibe: 400 mmDrehzahl: 33,5-1600 U/minDigitalanzeige: HaidenhainBettbreite: 340 mmDreibackenfutter: 250 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser über Bett: 520 mm
Drehdurchmesser über Support: 340 mm
Drehlänge: 1000 mm
Spindelbohrung: 55 mm
Planscheibe: 400 mm
Drehzahl: 33,5-1600 U/min
Digitalanzeige: Haidenhain
Bettbreite: 340 mm
Dreibackenfutter: 250 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Drehdurchmesser über Support: 340 mm
Drehlänge: 1000 mm
Spindelbohrung: 55 mm
Planscheibe: 400 mm
Drehzahl: 33,5-1600 U/min
Digitalanzeige: Haidenhain
Bettbreite: 340 mm
Dreibackenfutter: 250 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
7
Food machinesBakery-, pastry equipmentCutting machines
OPM ISF120S Spiral mixer, 120L spiral mixer, stainless bowl and spiral, variable speed, forward / reverse, with timer, 3Ph
OPM ISF120S Spiral mixer, 120L spiral mixer, stainless bowl and spiral, variable speed, forward / reverse, with timer, 3Ph
10
Food machinesAccessories and spare parts
Herma 752C labeller, Serial: 80002791, 2019, Stainless, Herma H400 labeller, on height adjustable frame, conveyor dimensions 1100mm x 230mm, with Zodiac HS printer and touch screen, with wiring diagram, 1Ph
Herma 752C labeller, Serial: 80002791, 2019, Stainless, Herma H400 labeller, on height adjustable frame, conveyor dimensions 1100mm x 230mm, with Zodiac HS printer and touch screen, with wiring diagram, 1Ph
6
Food machinesBeverage productionPumps
Alfa Laval SX2-013 Lobe pump, Serial: 423753, Stainless lobe pump, 40mm inlet and outlet, 0.55Kw motor, 3Ph
Alfa Laval SX2-013 Lobe pump, Serial: 423753, Stainless lobe pump, 40mm inlet and outlet, 0.55Kw motor, 3Ph
1
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 110 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 420/20 bzw. 28/28 mm
Stroke: 80 mm
Strokes: 28 1/min
Flat steel: 600x15 / 400x20 mm
Angle steel: 152x152x13 mm
Round / square steel: 50 mm
Notcher: 13x52x90 mm
Motor: 9 kW
Length: 2690 mm
Width: 1400 mm
Height: 2200 mm
Weight: 3300 kg
Punching power: 110 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 420/20 bzw. 28/28 mm
Stroke: 80 mm
Strokes: 28 1/min
Flat steel: 600x15 / 400x20 mm
Angle steel: 152x152x13 mm
Round / square steel: 50 mm
Notcher: 13x52x90 mm
Motor: 9 kW
Length: 2690 mm
Width: 1400 mm
Height: 2200 mm
Weight: 3300 kg
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 420/20 bzw. 28/28 mm
Stroke: 80 mm
Strokes: 28 1/min
Flat steel: 600x15 / 400x20 mm
Angle steel: 152x152x13 mm
Round / square steel: 50 mm
Notcher: 13x52x90 mm
Motor: 9 kW
Length: 2690 mm
Width: 1400 mm
Height: 2200 mm
Weight: 3300 kg
9
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
Opening of upper beam: 190 mm
Working height: 835 mm
Motor: 2.2 kW
Length with electrical shear: 5200 mm
Width: 1300 mm
Height: 1900 mm
Weight: 1550 kg
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
Opening of upper beam: 190 mm
Working height: 835 mm
Motor: 2.2 kW
Length with electrical shear: 5200 mm
Width: 1300 mm
Height: 1900 mm
Weight: 1550 kg
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
Opening of upper beam: 190 mm
Working height: 835 mm
Motor: 2.2 kW
Length with electrical shear: 5200 mm
Width: 1300 mm
Height: 1900 mm
Weight: 1550 kg
2
Metal working and machine toolsSheet metal working machinesBeading machines
Max. thickness - mild steel: 0.8 mm
Throat depth: 80 mm
Shaft length: 110 mm
Tools: 7 pcs.
Rolls diameter: 52 mm
Length: 380 mm
Width: 180 mm
Height: 380 mm
Weight: 30 kg
Max. thickness - mild steel: 0.8 mm
Throat depth: 80 mm
Shaft length: 110 mm
Tools: 7 pcs.
Rolls diameter: 52 mm
Length: 380 mm
Width: 180 mm
Height: 380 mm
Weight: 30 kg
Throat depth: 80 mm
Shaft length: 110 mm
Tools: 7 pcs.
Rolls diameter: 52 mm
Length: 380 mm
Width: 180 mm
Height: 380 mm
Weight: 30 kg
4
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 5750 x 41 x 1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 520 x 460 mm
Working height: 585 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3000 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1650 kg
Saw frame: Double column
Band dimensions: 5750 x 41 x 1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 520 x 460 mm
Working height: 585 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3000 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1650 kg
Band dimensions: 5750 x 41 x 1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 520 x 460 mm
Working height: 585 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3000 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1650 kg