14
Metal working and machine toolsOther
Temperature range: in Helium 2275 ° C
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good
High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.
Temperature range: in Helium 2275 ° C
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good
High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good
High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.
10
Metal working and machine toolsPressesOther
Druck: 630 KNStänderweite: 800 mmHub: 150 mmTischfläche: 720x550 mmStößelfläche: 720x520 mmEinbauhöhe: 420 mmEilsenkgeschwindigkeit: 394 mm/secArbeitsgeschwindigkeit: 71/17 mm/secRücklaufgeschwindigkeit: 390 mm/secVerstellwege der Hublage: 120 mmGesamtleistungsbedarf: 15 kWMaschinengewicht ca.: tRaumbedarf ca.: m
Druck: 630 KN
Ständerweite: 800 mm
Hub: 150 mm
Tischfläche: 720x550 mm
Stößelfläche: 720x520 mm
Einbauhöhe: 420 mm
Eilsenkgeschwindigkeit: 394 mm/sec
Arbeitsgeschwindigkeit: 71/17 mm/sec
Rücklaufgeschwindigkeit: 390 mm/sec
Verstellwege der Hublage: 120 mm
Gesamtleistungsbedarf: 15 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Ständerweite: 800 mm
Hub: 150 mm
Tischfläche: 720x550 mm
Stößelfläche: 720x520 mm
Einbauhöhe: 420 mm
Eilsenkgeschwindigkeit: 394 mm/sec
Arbeitsgeschwindigkeit: 71/17 mm/sec
Rücklaufgeschwindigkeit: 390 mm/sec
Verstellwege der Hublage: 120 mm
Gesamtleistungsbedarf: 15 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsAccessories and spare parts
Luftfördermenge: 2500 m³/hSaugkraft: . kPaAntriebsleistung: 1,1 kW
Luftfördermenge: 2500 m³/h
Saugkraft: . kPa
Antriebsleistung: 1,1 kW
Saugkraft: . kPa
Antriebsleistung: 1,1 kW
7
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 42 mm
Taper: MK 4
Distance spindle - column: 280 – 1.100 mm
Revs: 44 – 1.500 (12) r.p.m.
Tapping capacity: Stahl: M 25, Guss: M 38
Distance table - spindle underside: 470 – 1.270 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 2.2 kW
Column diameter: 260 mm
Quill travel: 280 mm
Table: 1.725 x 715 x 180 mm
Box table dimensions: 635 x 520 x 415 mm
max. height: 2530 mm
Length: 1880 mm
Width: 870 mm
Height: 2210 mm
Weight: 1800 kg
Drilling capacy mild steel: 42 mm
Taper: MK 4
Distance spindle - column: 280 – 1.100 mm
Revs: 44 – 1.500 (12) r.p.m.
Tapping capacity: Stahl: M 25, Guss: M 38
Distance table - spindle underside: 470 – 1.270 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 2.2 kW
Column diameter: 260 mm
Quill travel: 280 mm
Table: 1.725 x 715 x 180 mm
Box table dimensions: 635 x 520 x 415 mm
max. height: 2530 mm
Length: 1880 mm
Width: 870 mm
Height: 2210 mm
Weight: 1800 kg
Taper: MK 4
Distance spindle - column: 280 – 1.100 mm
Revs: 44 – 1.500 (12) r.p.m.
Tapping capacity: Stahl: M 25, Guss: M 38
Distance table - spindle underside: 470 – 1.270 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 2.2 kW
Column diameter: 260 mm
Quill travel: 280 mm
Table: 1.725 x 715 x 180 mm
Box table dimensions: 635 x 520 x 415 mm
max. height: 2530 mm
Length: 1880 mm
Width: 870 mm
Height: 2210 mm
Weight: 1800 kg
8
Metal working and machine toolsLathes
Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: Array
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: Array
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: Array
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 320 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X
Stroke: 365 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1770 mm
Height: 2850 mm
Weight: 20000 kg
pressing capacity: 320 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X
Stroke: 365 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1770 mm
Height: 2850 mm
Weight: 20000 kg
Bending length: 4050 mm
Axes: Y1 / Y2 / X
Stroke: 365 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1770 mm
Height: 2850 mm
Weight: 20000 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 600 to
Bending length: 6050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 5100 mm
Gap in side frame: 510 mm
Daylight: 700 mm
Power concept: hydraulic
rapid speed Y-axis: 80 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 80
Back gauge travel X-axis: 750 mm
Oiltank: 280 l
Motor: 2 x 11 kW kW
Length: 7600 mm
Width: 2650 mm
Height: 3950 mm
Weight: 52500 kg
pressing capacity: 600 to
Bending length: 6050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 5100 mm
Gap in side frame: 510 mm
Daylight: 700 mm
Power concept: hydraulic
rapid speed Y-axis: 80 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 80
Back gauge travel X-axis: 750 mm
Oiltank: 280 l
Motor: 2 x 11 kW kW
Length: 7600 mm
Width: 2650 mm
Height: 3950 mm
Weight: 52500 kg
Bending length: 6050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 5100 mm
Gap in side frame: 510 mm
Daylight: 700 mm
Power concept: hydraulic
rapid speed Y-axis: 80 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 80
Back gauge travel X-axis: 750 mm
Oiltank: 280 l
Motor: 2 x 11 kW kW
Length: 7600 mm
Width: 2650 mm
Height: 3950 mm
Weight: 52500 kg
1
Metal working and machine toolsSheet metal working machines
pressing capacity: 100 to
Stroke: 500 mm
Ram: 600 x 900 mm
Table: 700 x 1100 mm
Daylight: 750 mm
Throat depth: 320 mm
Rapid speed: 100 mm/s
Working speed: 8 mm/s
Retraction speed: 165 mm/s
Motor: 11 kW
Working pressure: 240 bar
Die cushion pressing force: 30 to
Die cushion stroke: 200 mm
Table Drill Ø: 120 mm
Draw cushion working pressure: 170 bar
Draw cushion retraction speed: 52 mm/sec.
Draw cushion surface: 700 x 400 mm
Length: 2100 mm
Width: 1900 mm
Height: 3350 mm
Weight: 7300 kg
pressing capacity: 100 to
Stroke: 500 mm
Ram: 600 x 900 mm
Table: 700 x 1100 mm
Daylight: 750 mm
Throat depth: 320 mm
Rapid speed: 100 mm/s
Working speed: 8 mm/s
Retraction speed: 165 mm/s
Motor: 11 kW
Working pressure: 240 bar
Die cushion pressing force: 30 to
Die cushion stroke: 200 mm
Table Drill Ø: 120 mm
Draw cushion working pressure: 170 bar
Draw cushion retraction speed: 52 mm/sec.
Draw cushion surface: 700 x 400 mm
Length: 2100 mm
Width: 1900 mm
Height: 3350 mm
Weight: 7300 kg
Stroke: 500 mm
Ram: 600 x 900 mm
Table: 700 x 1100 mm
Daylight: 750 mm
Throat depth: 320 mm
Rapid speed: 100 mm/s
Working speed: 8 mm/s
Retraction speed: 165 mm/s
Motor: 11 kW
Working pressure: 240 bar
Die cushion pressing force: 30 to
Die cushion stroke: 200 mm
Table Drill Ø: 120 mm
Draw cushion working pressure: 170 bar
Draw cushion retraction speed: 52 mm/sec.
Draw cushion surface: 700 x 400 mm
Length: 2100 mm
Width: 1900 mm
Height: 3350 mm
Weight: 7300 kg
1
Metal working and machine toolsAccessories and spare partsOther
Working height: 610 - 920 mm
Maximal table load: 700 kg
width of rolls: 350 mm
diameter of rolls: 52 mm
number of rolls: 1
Weight: 20 kg
Working height: 610 - 920 mm
Maximal table load: 700 kg
width of rolls: 350 mm
diameter of rolls: 52 mm
number of rolls: 1
Weight: 20 kg
Maximal table load: 700 kg
width of rolls: 350 mm
diameter of rolls: 52 mm
number of rolls: 1
Weight: 20 kg
1
Metal working and machine toolsAccessories and spare partsOther
Working height: 530 - 870 mm
Maximal table load: 700 kg
width of rolls: 2 x 125 mm
diameter of rolls: 52 mm
number of rolls: 2
Weight: 20 kg
Working height: 530 - 870 mm
Maximal table load: 700 kg
width of rolls: 2 x 125 mm
diameter of rolls: 52 mm
number of rolls: 2
Weight: 20 kg
Maximal table load: 700 kg
width of rolls: 2 x 125 mm
diameter of rolls: 52 mm
number of rolls: 2
Weight: 20 kg
2
Metal working and machine toolsAccessories and spare parts
V-Size: 16 mm
Length: 835 mm
Height: 80 mm
V-Size: 16 mm
Length: 835 mm
Height: 80 mm
Length: 835 mm
Height: 80 mm
8
Metal working and machine toolsSheet metal working machines
pressing capacity: 150 to
Stroke: 500 mm
Table: 2.500 x 2.050 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1400 mm
Hydraulicaly movable stand: 1600 mm
Length: 2900 mm
Width: 2500 mm
Height: 2500 mm
Weight: 5200 kg
pressing capacity: 150 to
Stroke: 500 mm
Table: 2.500 x 2.050 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1400 mm
Hydraulicaly movable stand: 1600 mm
Length: 2900 mm
Width: 2500 mm
Height: 2500 mm
Weight: 5200 kg
Stroke: 500 mm
Table: 2.500 x 2.050 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1400 mm
Hydraulicaly movable stand: 1600 mm
Length: 2900 mm
Width: 2500 mm
Height: 2500 mm
Weight: 5200 kg
3
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 50 mm
Taper: MK 4
Distance spindle - column: 350 mm
Revs: 93 - 152 - 204 - 298 - 443 - 695 - 970 - 1.420 r.p.m.
Motor power: 3 kW
Tapping capacity: M35
Feeds: 0,1 / 0,18 / 0,24 mm/r
max. drilling depth: 180 mm
Column diameter: 150 mm
Length: 480 mm
Width: 755 mm
Height: 2265 mm
Weight: 435 kg
Drilling capacy mild steel: 50 mm
Taper: MK 4
Distance spindle - column: 350 mm
Revs: 93 - 152 - 204 - 298 - 443 - 695 - 970 - 1.420 r.p.m.
Motor power: 3 kW
Tapping capacity: M35
Feeds: 0,1 / 0,18 / 0,24 mm/r
max. drilling depth: 180 mm
Column diameter: 150 mm
Length: 480 mm
Width: 755 mm
Height: 2265 mm
Weight: 435 kg
Taper: MK 4
Distance spindle - column: 350 mm
Revs: 93 - 152 - 204 - 298 - 443 - 695 - 970 - 1.420 r.p.m.
Motor power: 3 kW
Tapping capacity: M35
Feeds: 0,1 / 0,18 / 0,24 mm/r
max. drilling depth: 180 mm
Column diameter: 150 mm
Length: 480 mm
Width: 755 mm
Height: 2265 mm
Weight: 435 kg
3
Metal working and machine toolsPressesWorkshop press
pressing capacity: 100 to
Cylinder fix or moveable: fix
Bending length: 1500 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 680 mm
Rapid speed: 10 mm/s
Working speed: 5 mm/s
Max. bending capacity (mild steel): 6 mm
Table: 500x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2500 kg
pressing capacity: 100 to
Cylinder fix or moveable: fix
Bending length: 1500 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 680 mm
Rapid speed: 10 mm/s
Working speed: 5 mm/s
Max. bending capacity (mild steel): 6 mm
Table: 500x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2500 kg
Cylinder fix or moveable: fix
Bending length: 1500 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 680 mm
Rapid speed: 10 mm/s
Working speed: 5 mm/s
Max. bending capacity (mild steel): 6 mm
Table: 500x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2500 kg
2
Metal working and machine toolsLathes
Swing over bed: 400 mm
Distance between centers: 750 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 18-98, 48-265, 144-790, 385-2.120 U/min rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: Array
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 7.5 kW
Weight: 1530 kg
Swing over bed: 400 mm
Distance between centers: 750 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 18-98, 48-265, 144-790, 385-2.120 U/min rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: Array
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 7.5 kW
Weight: 1530 kg
Distance between centers: 750 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 18-98, 48-265, 144-790, 385-2.120 U/min rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: Array
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 7.5 kW
Weight: 1530 kg
2
Metal working and machine toolsLathes
Swing over bed: 1090 mm
Distance between centers: 3000 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 240
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8050 kg
Swing over bed: 1090 mm
Distance between centers: 3000 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 240
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8050 kg
Distance between centers: 3000 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 240
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8050 kg
7
Metal working and machine toolsLathes
Swing over bed: 1090 mm
Distance between centers: 3000 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
Swing over bed: 1090 mm
Distance between centers: 3000 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
Distance between centers: 3000 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
2
Metal working and machine toolsLathes
Swing over bed: 890 mm
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 7500 kg
Swing over bed: 890 mm
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 7500 kg
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 7500 kg
2
Metal working and machine toolsLathes
Swing over bed: 890 mm
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
Swing over bed: 890 mm
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
Distance between centers: 3000 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
1
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 80 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2400 kg
Punching power: 80 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2400 kg
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2400 kg
5
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 80 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2070 kg
Punching power: 80 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2070 kg
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2070 kg
5
Metal working and machine toolsPressesWorkshop press
pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1520 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Table: 600x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1520 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Table: 600x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
Cylinder fix or moveable: fix
Bending length: 1520 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 10 mm
Table: 600x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
2
Metal working and machine toolsSheet metal working machinesBending machines
Bending length: 350 - 2250 mm
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
Bending length: 350 - 2250 mm
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
11
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18142
Manufacturer: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
Ref. no.: 18142
Manufacturer: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
Manufacturer: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
13
Plastic processing machinesInjection molding machinesMulti-component injection molding machines
Ref. no.: 18092
Manufacturer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
Further information:
ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine
This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout.
Motor and Hydraulic System
The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other.
Operating Principle
The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle.
Applications
Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.
Ref. no.: 18092
Manufacturer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
Further information:
ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine
This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout.
Motor and Hydraulic System
The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other.
Operating Principle
The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle.
Applications
Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.
Manufacturer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
Further information:
ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine
This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout.
Motor and Hydraulic System
The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other.
Operating Principle
The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle.
Applications
Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.
11
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 17507
Manufacturer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
Ref. no.: 17507
Manufacturer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
Manufacturer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 16369
Manufacturer: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Further information:
BATTENFELD EM 75/120 UNILOG B4
All-Electric Precision Injection Moulding Machine
The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.
All major machine movements are driven by modern servo motors, providing:
* very low energy consumption
* high repeatability and precision
* smooth and quiet machine operation
* low maintenance requirements
* stable and accurate production performance
The machine is especially suitable for:
* technical plastic components
* electronic parts
* precision moulded products
* small and medium-sized production runs
Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.
Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:
* user-friendly operation
* precise process control
* stable cycle times
* accurate servo axis management
The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:
* a clean electrical cabinet
* well-maintained mechanical components
* properly kept servo-electric units
* a clean injection unit
The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.
Ref. no.: 16369
Manufacturer: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Further information:
BATTENFELD EM 75/120 UNILOG B4
All-Electric Precision Injection Moulding Machine
The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.
All major machine movements are driven by modern servo motors, providing:
* very low energy consumption
* high repeatability and precision
* smooth and quiet machine operation
* low maintenance requirements
* stable and accurate production performance
The machine is especially suitable for:
* technical plastic components
* electronic parts
* precision moulded products
* small and medium-sized production runs
Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.
Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:
* user-friendly operation
* precise process control
* stable cycle times
* accurate servo axis management
The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:
* a clean electrical cabinet
* well-maintained mechanical components
* properly kept servo-electric units
* a clean injection unit
The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.
Manufacturer: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Further information:
BATTENFELD EM 75/120 UNILOG B4
All-Electric Precision Injection Moulding Machine
The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.
All major machine movements are driven by modern servo motors, providing:
* very low energy consumption
* high repeatability and precision
* smooth and quiet machine operation
* low maintenance requirements
* stable and accurate production performance
The machine is especially suitable for:
* technical plastic components
* electronic parts
* precision moulded products
* small and medium-sized production runs
Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.
Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:
* user-friendly operation
* precise process control
* stable cycle times
* accurate servo axis management
The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:
* a clean electrical cabinet
* well-maintained mechanical components
* properly kept servo-electric units
* a clean injection unit
The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.
2
Metal working and machine toolsLathesOther
punch set
punch set
4
Packaging machineryPacking machines
Vibration monitoring: yes
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
Vibration monitoring: yes
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
4
Packaging machineryPacking machines
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
3
Packaging machineryPacking machines
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
10
Metal working and machine toolsMeasuring machinesPre-setting tools
Länge: 800 mmMessbereich X-Achse: 520 mmTischgröße: 700 mmGewicht: 900 kg
Länge: 800 mm
Messbereich X-Achse: 520 mm
Tischgröße: 700 mm
Gewicht: 900 kg
Messbereich X-Achse: 520 mm
Tischgröße: 700 mm
Gewicht: 900 kg
10
Metal working and machine toolsSawingCircular saws
Sägeblattdurchmesser: 450 mmSchnittdurchmesser: 150 mmHub: 1300 mmSchnittbereich: 140x140 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Sägeblattdurchmesser: 450 mm
Schnittdurchmesser: 150 mm
Hub: 1300 mm
Schnittbereich: 140x140 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Schnittdurchmesser: 150 mm
Hub: 1300 mm
Schnittbereich: 140x140 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsPressesStraightening presses
Druck: 100 tHub: 300 mmZylinder: 205 MMAbstand Tisch / Stößel: 520 mmTischfläche: 1100X350 mmStößelfläche: 350X350 mmGesamtleistungsbedarf: 7,5 kWMaschinengewicht ca.: tRaumbedarf ca.: m
Druck: 100 t
Hub: 300 mm
Zylinder: 205 MM
Abstand Tisch / Stößel: 520 mm
Tischfläche: 1100X350 mm
Stößelfläche: 350X350 mm
Gesamtleistungsbedarf: 7,5 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Hub: 300 mm
Zylinder: 205 MM
Abstand Tisch / Stößel: 520 mm
Tischfläche: 1100X350 mm
Stößelfläche: 350X350 mm
Gesamtleistungsbedarf: 7,5 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
8
Conveyor technologyCranes
Tragkraft: 5 tHub: 7000 mmSpannweite: 17508 mmHöhe: . mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Tragkraft: 5 t
Hub: 7000 mm
Spannweite: 17508 mm
Höhe: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Hub: 7000 mm
Spannweite: 17508 mm
Höhe: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
4
Metal working and machine toolsMilling machinesTool milling machines
x-Weg: 560 mmy-Weg: 500 mmz-Weg: 450 mmTischfläche: 900x520 mmDrehzahl: 4000 U/minWerkzeugaufnahme: SK 40Steuerung: HeidenhainTyp: TNC 355Handrad: elec.Gesamtleistungsbedarf: kWMaschinengewicht ca.: 2,7 tRaumbedarf ca.: m
x-Weg: 560 mm
y-Weg: 500 mm
z-Weg: 450 mm
Tischfläche: 900x520 mm
Drehzahl: 4000 U/min
Werkzeugaufnahme: SK 40
Steuerung: Heidenhain
Typ: TNC 355
Handrad: elec.
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 2,7 t
Raumbedarf ca.: m
y-Weg: 500 mm
z-Weg: 450 mm
Tischfläche: 900x520 mm
Drehzahl: 4000 U/min
Werkzeugaufnahme: SK 40
Steuerung: Heidenhain
Typ: TNC 355
Handrad: elec.
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 2,7 t
Raumbedarf ca.: m
10
Metal working and machine toolsMilling machinesBed milling machines
x-Weg: 4000 mmy-Weg: 2000 mmz-Weg: 1300 mmSteuerung: HeindenhainTyp: TNC530iTischfläche: 5200x2000 mmTischbelastung: 30000 kgPinolendurchmesser: 230 mmAnzahl der T-Nuten: 11T-Nuten - Breite: 28 mmT-Nuten - Abstand: 175 mmSpindelaufnahme ISO: 50Drehzahl: 40-2000 U/minSpindelantrieb: 30 kWGetriebestufen: 4Gesamtleistungsbedarf: kWMaschinengewicht ca.: 70 tRaumbedarf ca.: 10x5,5x5,8 m
x-Weg: 4000 mm
y-Weg: 2000 mm
z-Weg: 1300 mm
Steuerung: Heindenhain
Typ: TNC530i
Tischfläche: 5200x2000 mm
Tischbelastung: 30000 kg
Pinolendurchmesser: 230 mm
Anzahl der T-Nuten: 11
T-Nuten - Breite: 28 mm
T-Nuten - Abstand: 175 mm
Spindelaufnahme ISO: 50
Drehzahl: 40-2000 U/min
Spindelantrieb: 30 kW
Getriebestufen: 4
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 70 t
Raumbedarf ca.: 10x5,5x5,8 m
y-Weg: 2000 mm
z-Weg: 1300 mm
Steuerung: Heindenhain
Typ: TNC530i
Tischfläche: 5200x2000 mm
Tischbelastung: 30000 kg
Pinolendurchmesser: 230 mm
Anzahl der T-Nuten: 11
T-Nuten - Breite: 28 mm
T-Nuten - Abstand: 175 mm
Spindelaufnahme ISO: 50
Drehzahl: 40-2000 U/min
Spindelantrieb: 30 kW
Getriebestufen: 4
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 70 t
Raumbedarf ca.: 10x5,5x5,8 m
10
Metal working and machine toolsMilling machinesBed milling machines
x-Weg: 3000 mmy-Weg: 1350 mmz-Weg: 1400 mmSpindelaufnahme ISO: 50Drehzahl: 22-1400 U/minDrehtisch: 800x600 mmTischabmessung: 2500x1200 mmVorschub: 5-3000 mm/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 3000 mm
y-Weg: 1350 mm
z-Weg: 1400 mm
Spindelaufnahme ISO: 50
Drehzahl: 22-1400 U/min
Drehtisch: 800x600 mm
Tischabmessung: 2500x1200 mm
Vorschub: 5-3000 mm/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
y-Weg: 1350 mm
z-Weg: 1400 mm
Spindelaufnahme ISO: 50
Drehzahl: 22-1400 U/min
Drehtisch: 800x600 mm
Tischabmessung: 2500x1200 mm
Vorschub: 5-3000 mm/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
7
Metal working and machine toolsMilling machinesOther
x-Weg: 5000 mmy-Weg: 550 mmz-Weg: 550 mmSteuerung: FanucTyp: Series 15 MTischfläche: 5000x520 mmTischbelastung: 4000 kgPinolenhub: 550 mmAusladung: 580 mmEntfernung Spindel/Tisch: 250-800 mmSpindelaufnahme ISO: 40Spindeldrehzahlen: 40-2000 U/minWerkzeugwechsler: 40Gesamtleistungsbedarf: 55 kWMaschinengewicht ca.: 20 tRaumbedarf ca.: m
x-Weg: 5000 mm
y-Weg: 550 mm
z-Weg: 550 mm
Steuerung: Fanuc
Typ: Series 15 M
Tischfläche: 5000x520 mm
Tischbelastung: 4000 kg
Pinolenhub: 550 mm
Ausladung: 580 mm
Entfernung Spindel/Tisch: 250-800 mm
Spindelaufnahme ISO: 40
Spindeldrehzahlen: 40-2000 U/min
Werkzeugwechsler: 40
Gesamtleistungsbedarf: 55 kW
Maschinengewicht ca.: 20 t
Raumbedarf ca.: m
y-Weg: 550 mm
z-Weg: 550 mm
Steuerung: Fanuc
Typ: Series 15 M
Tischfläche: 5000x520 mm
Tischbelastung: 4000 kg
Pinolenhub: 550 mm
Ausladung: 580 mm
Entfernung Spindel/Tisch: 250-800 mm
Spindelaufnahme ISO: 40
Spindeldrehzahlen: 40-2000 U/min
Werkzeugwechsler: 40
Gesamtleistungsbedarf: 55 kW
Maschinengewicht ca.: 20 t
Raumbedarf ca.: m
6
Metal working and machine toolsDrilling machines and boring millsJig boring mills
x-Weg: 520 mmy-Weg: 400 mmz-Weg: 450 mmSpindelaufnahme ISO: 40Steuerung: TNC 360Kühlmittelbehälter: lGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: 2450x2300x3300 m
x-Weg: 520 mm
y-Weg: 400 mm
z-Weg: 450 mm
Spindelaufnahme ISO: 40
Steuerung: TNC 360
Kühlmittelbehälter: l
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: 2450x2300x3300 m
y-Weg: 400 mm
z-Weg: 450 mm
Spindelaufnahme ISO: 40
Steuerung: TNC 360
Kühlmittelbehälter: l
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: 2450x2300x3300 m
8
Metal working and machine toolsLathesBench lathes
Drehdurchmesser über Bett: max.: 4000 mmDrehdurchmesser über Support: . mmDrehlänge: 7500 mmGeschwindigkeit: 0-750 u/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser über Bett: max.: 4000 mm
Drehdurchmesser über Support: . mm
Drehlänge: 7500 mm
Geschwindigkeit: 0-750 u/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Drehdurchmesser über Support: . mm
Drehlänge: 7500 mm
Geschwindigkeit: 0-750 u/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
9
Metal working and machine toolsLathesCNC lathes
Drehdurchmesser: 315 mmDrehlänge: 1000 mmSteuerung: SiemensTyp: Sinumerik 802 DDreh Durchmesser über Schlitten: 160 mmSpindeldurchlaß: 52 mmWerkzeugwechsler: 12Drehzahl: 30-3300 U/minGesamtleistungsbedarf: kWMaschinengewicht ca.: 6 tRaumbedarf ca.: m
Drehdurchmesser: 315 mm
Drehlänge: 1000 mm
Steuerung: Siemens
Typ: Sinumerik 802 D
Dreh Durchmesser über Schlitten: 160 mm
Spindeldurchlaß: 52 mm
Werkzeugwechsler: 12
Drehzahl: 30-3300 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 6 t
Raumbedarf ca.: m
Drehlänge: 1000 mm
Steuerung: Siemens
Typ: Sinumerik 802 D
Dreh Durchmesser über Schlitten: 160 mm
Spindeldurchlaß: 52 mm
Werkzeugwechsler: 12
Drehzahl: 30-3300 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 6 t
Raumbedarf ca.: m
5
Food machinesPackaging machinery
Top and bottom case taper, side grip belts, max box width 450mm, max box height 450mm, with roller infeed and outfeed conveyor, 3Ph
Top and bottom case taper, side grip belts, max box width 450mm, max box height 450mm, with roller infeed and outfeed conveyor, 3Ph
5
Food machinesBakery-, pastry equipmentCutting machines
Grote 613-90 slicer stainless, variety of slicing applications including bulk slicing, stacking and shingling into portions, ideal for meat, cheese, vegetables, fruits and bread products, up to 90strokes per min, variable slice thickness 0.5mm - 12.7mm, cutting area 330mm x 152mm, with mesh outfeed, 1Ph
Grote 613-90 slicer stainless, variety of slicing applications including bulk slicing, stacking and shingling into portions, ideal for meat, cheese, vegetables, fruits and bread products, up to 90strokes per min, variable slice thickness 0.5mm - 12.7mm, cutting area 330mm x 152mm, with mesh outfeed, 1Ph
4
Food machinesBakery-, pastry equipmentCutting machines
Serial: 5250 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts and a spare blade, mobile
Serial: 5250 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts and a spare blade, mobile
5
Food machinesPackaging machinery
Endoline 707 Case taper Top and bottom case taper, max box width 500mm, max box height 500mm, stainless side guides, roller outfeed conveyor, mobile, 3Ph
Endoline 707 Case taper Top and bottom case taper, max box width 500mm, max box height 500mm, stainless side guides, roller outfeed conveyor, mobile, 3Ph
5
Food machinesPackaging machinery
Endoline Case taper Top and bottom case taper, max box width 500mm, max box height 500mm, stainless side guides, roller outfeed conveyor, mobile, 3Ph
Endoline Case taper Top and bottom case taper, max box width 500mm, max box height 500mm, stainless side guides, roller outfeed conveyor, mobile, 3Ph
7
Food machinesOther
Gough Vibratory conveyor Stainless contact parts, variable speed control, overall length 1300mm, conveyor width 520mm, discharge height 770mm, 1Ph
Gough Vibratory conveyor Stainless contact parts, variable speed control, overall length 1300mm, conveyor width 520mm, discharge height 770mm, 1Ph
6
Food machinesPackaging machinery
Top and bottom case taper, side grip belts, max box width 450mm, max box height 400mm, with infeed and outfeed roller conveyor, 3ph
Top and bottom case taper, side grip belts, max box width 450mm, max box height 400mm, with infeed and outfeed roller conveyor, 3ph
8
Food machinesBakery-, pastry equipmentCutting machines
Stainless frame, up to 120 strokes per min, product size 101.6mm x 300mm, slice thickness up to 9.52mm, mobile, 1Ph
Stainless frame, up to 120 strokes per min, product size 101.6mm x 300mm, slice thickness up to 9.52mm, mobile, 1Ph