Spindeldurchmesser: 130 mm
x-Weg: 10000 mm
y-Weg: 3500 mm
z-Weg: 1000 mm
Steuerung: Heidenhain
Typ: TRT1500 mm
Werkstückgewicht: 300 t
Drehzahl: 1620 U/min
Spindelaufnahme ISO: 50
Stützlager: 2
Winkelkopf: 2
Antriebsleistung: 76 kW
Plattenfeld: 109 m²
Dicke: 450 mm
Bohrwerksdrehtisch:: Colgar
Tischfläche: 2000x2500 mm
Tischbelastung: 20000 kg
Verfahrweg: 2000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Spindeldurchmesser: 205 mm
x-Weg: 10000 mm
y-Weg: 2500 mm
w-Achse: 500 mm
Spindelweg: 1250 mm
Steuerung: Heidenhain
Typ: TNC 355
Spindelaufnahme ISO: 50
Getriebestufen: 2
Vorschub - selbsttätig: 0-3000 mm
Spindelantrieb: 37 kW
Gesamtleistungsbedarf: 70 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 14,1x3,2x5,6 m

Spindeldurchmesser: 125 mm
x-Weg: 2500 mm
y-Weg: 1900 mm
w-Achse: 1100 mm
Planschieberweg: mm
Bohrwerksdrehtisch:: 1800x1300 mm
Tisch verstellbar: 1000 mm
Digitalanzeige: Pfillips
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Drehdurchmesser über Bett: 3050 mm
Drehdurchmesser über Support: 2500 mm
Drehlänge: 21200 mm
Steuerung: Siemens
Typ: 840D
Drehzahl: 0,236-60 U/min
Planscheibe: 2000 mm
Hauptantriebsmotor: 200 kW
Reitstockpinolendurchmesser: 900 mm
Lünette: 750 mm
mitlaufende Lünette: 2000 mm
Dicke: 330 mm
Werkstückgewicht: 200 t
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Drehdurchmesser über Bett: 2200 mm
Drehdurchmesser über Support: 2200 mm
Drehlänge: 10000-11000 mm
Steuerung: Sinumerik 840 D
Werkstückgewicht: 70.000 kg
Planscheibe: 2000 mm
Lünette: 2
Drehmoment: 125000 Nm
Vorschub: 0,3-4000 mm/min
Eilgang: 4000 mm/min
Gesamtleistungsbedarf: 110 kW
Maschinengewicht ca.: 120 t
Raumbedarf ca.: 22x6,2x2,9 m

Drehdurchmesser über Bett: 2100 mm
Drehdurchmesser über Support: 1300 mm
Drehlänge: 6800 mm
Werkstückgewicht: 25000 kg
Hauptantriebsmotor: 140 kW
Steuerung: Siemens
Typ: 840 C
Planscheibe: 1100 mm
Bettbreite: 2500 mm
Lünette: 600 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Drehdurchmesser über Support: 760 mm
Drehlänge: 2500 mm
Spindelbohrung: 104 mm
Drehzahl: 3,55-710 U/min
Planscheibe: 1000 mm
Drehdurchmesser in der Kröpfung: 1345 mm
Länge der Kröpfung: 400 mm
Werkstückgewicht: 10000 kg
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 10 t
Raumbedarf ca.: 8x2x1,8 m

Planscheibendurchmesser: 2500 mm
Umlaufdurchmesser: 2865 mm
Drehhöhe: 3000 mm
Steuerung: R & D
Typ: MTC 4
Support: 2
Supportverstellung: 1500 mm
Drehzahl: 140 U/min
Werkzeugwechseleinrichtung: 12 Pos.
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Planscheibendurchmesser: 2200 mm
Umlaufdurchmesser: 2500 mm
Drehhöhe: 1600 mm
Steuerung: Siemens
Gesamtleistungsbedarf: 100 kW
Maschinengewicht ca.: 35 t
Raumbedarf ca.: m

Planscheibendurchmesser: 5300 mm
Umlaufdurchmesser: 6300 mm
Drehhöhe: 2800 mm
Supportverstellung: 1700 mm
Tischbelastung: 50 t
Drehzahl: 0,3-14 U/min
Vorschub: 0,056-10 mm/U
Digitalanzeige: Sony
Support: 2
Gesamtleistungsbedarf: 120 kW
Maschinengewicht ca.: 187 t
Raumbedarf ca.: m

Planscheibendurchmesser: 2500 mm
Umlaufdurchmesser: 2900 mm
Drehhöhe: 1650 mm
Vertikalverstellung der Supporte: 850 mm
Seitensupport - Horizontalverstellung: 900 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: mm

Drehdurchmesser: 710 mm
Drehlänge: 2000 mm
Steuerung: Heidenhain
Typ: Manuel Plus
Drehdurchmesser über Support: 410 mm
x-Weg: 385 mm
Drehzahl: 9-1800 U/min
Getriebestufen: 2
Antriebsleistung - Werkstück: 22 kW
Drehmoment: 2500 Nm
Spindeldurchmesser: 160 mm
Spindeldurchlass: 92 mm
Gesamtleistungsbedarf: 49 KVA
Maschinengewicht ca.: 5,6 t
Raumbedarf ca.: 5x2x2,2 m

pressing capacity: 200 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R-axis
Stroke: 210 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 445 mm
Power concept: hydraulic
rapid speed Y-axis: 100 mm/s
Working speed Y-axis: 7
Retractionspeed Y-axis: 73
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 858 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 3750 mm
Width: 1390 mm
Height: 2500 mm
Weight: 8160 kg

Swing over bed: 330 mm
Distance between centers: 1000 mm
Centre height: 167 mm
Spindle bore: 38 mm
swing over cross slide: 210 mm
Spindle speed steps: 12
Spindle revs: 40 - 2500 rpm
Number of feeds: 16
Longitudinal feed range: 0.03 - 1 mm/r
Metric thread range: 0.2 - 14 mm
Inch thread range: 2 - 56 TPI Tpi
Cross slide travel: 190 mm
Top slide travel: 92 mm
Tailstock quill diameter: 42 mm
Tailstock quill taper: 3 MK
Tailstock travel: 110 mm
Motor power: 2 kW
Length: 1900 mm
Width: 1000 mm
Height: 1550 mm
Weight: 685 kg

x-Weg: 3000 mm
y-Weg: 2500 mm
z-Weg: 1000 mm
Steuerung: Siemens
Typ: 840 D
Vorschub: 5-30.000 mm/min
Tischfläche: 2000x2170 mm
Tischbelastung: 1500 Kg/m²
T-Nuten: 22 H9
Ständerdurchgang: 2500 mm
Spindeldrehzahlen: 6000 U/min
Spindelmotor: 36 kW
Spindelaufnahme: HSK 100
Werkzeugwechsler: 30
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: 8x6,4x4,4 m

Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm

Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm

Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. coil width for version with pneumatic downholder: 80 mm
Length: 1600 mm
Width: 1550 mm
Height: 2000 mm
Weight: 580 kg

Drilling capacy mild steel: 32 mm
Spindle cone: MK 4
Distance spindle - column: 300 - 1.000 mm
Revs: 32 - 2.500 (16) r.p.m.
Distance table - spindle underside: 530 - 1.000 mm
Spindle motor: 2.2 kW
Column diameter: 240 mm
Quill travel: 250 mm
Feeds: 0,10 - 1,25 (8) mm/r
Length: 1760 mm
Width: 800 mm
Height: 2080 mm
Weight: 1600 kg

Nilpeter FA 2500

Year 2002
6 color

Unwind,
Fife Web Guide Splice Table,
Versatec Web tension Control
6 x Flexo Print Units,
DPL UV Drying system,
Kelva Webcleaner K-15
Hot air dryers
Lamination Unwind,
3 x Rotary Die Slots,
Touch Screen Control,
Slitting Unit
Product Rewind
BST Powerscope digital 4000 Web Inspection Camera,

Tooling:
Print Cylinders
120 z x 6
117 z x 11
113 z x 6
110 z x 6
106 z x 6
102 z x 6
100 z x 6
96 z x 6
93 z x 6
90 z x 6
88 z x 6
84 z x 6
80 z x 6
76 z x 6
74 z x 6
72 z x 6
70 z x 6
68 z x 6
64 z x 6
62 z x 6
60 z x 6
58 z x 6

Mag Cylinders none

Dorner conveyor, 2019, variable speed conveyor, belt dimensions 2500mm x 450mm, belt height 800mm, 1Ph

pressing capacity: 85 to
Stroke: 500 mm
Ram: 700x400 mm
Table: 800x600 mm
Daylight: 600 mm
Throat depth: 300 mm
Rapid speed: 105 mm/s
Reduced speed: 41 mm/s
Working speed: 7 mm/s
Retraction speed: 58 mm/s
Motor: 7.5 kW
Length: 1200 mm
Width: 1600 mm
Height: 2500 mm

Endoline 402 Automatic case gluer, Serial: 160875617-2, 2016, fully automatic case gluer, up to 30cases per min, cases between 160mm - 500mm L, 100mm - 400mm W, 100mm - 500mm H, with Nordson problue gluer, infeed conveyor 2500mm x 500mm, roller conveyor on outfeed section, 3Ph

Load capacity in kg: 2500 kg
Stroke: 2900mm
Fork length: . mm
Total power requirement: kW
Machine weight approx.: 3310 t
Space requirement approx.: m

x-travel: 30000 mm
y-travel: 3600 mm
z-travel: 1900 mm
Control: Heidenhain
Type: TNC 530 i
Milling head - pivoting: CNC
Speed: 4000 rpm
Cone mount: DIN 69871+AD mm
Spindle motor: 46 kW
Feed: 10000mm/min
Rapid traverse: 25000 mm/min
Chip conveyor: 2 pcs.
Panel field: 30000x3000 mm
Total power requirement: 85 kW
Machine weight approx.: t
Space requirement approx.: m

Bending length: 2550 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 750 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 0-20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 3800 mm
Width: 2100 mm
Height: 1650 mm
Weight: 2500 kg

Bending length: 2550 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 1000 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 0-20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 3800 mm
Width: 2350 mm
Height: 1650 mm
Weight: 2500 kg

pressing capacity: 600 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 3100 mm
Gap in side frame: 410 mm
Daylight: 700 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 280 l
Motor power: 2 x 11 kW
Length: 5750 mm
Width: 2500 mm
Height: 4000 mm
Weight: 40500 kg

x-travel: 3500 mm
y-travel: 1600 mm
z-travel: 900 mm
Speed: 20-2000 rpm
Spindle mount ISO: SK50
Table dimension: 5000x1000 mm
Control: Heidenhain TNC 426
Spindle drive motor: 22 kW
Rapid traverse: 5000 mm/min
Machine weight approx.: 16 t

Luftfördermenge: 2500 m³/h
Saugkraft: . kPa
Antriebsleistung: 1,1 kW

pressing capacity: 600 to
Bending length: 6050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 5100 mm
Gap in side frame: 510 mm
Daylight: 700 mm
Power concept: hydraulic
rapid speed Y-axis: 80 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 80
Back gauge travel X-axis: 750 mm
Oiltank: 280 l
Motor power: 2 x 11 kW
Length: 7600 mm
Width: 2650 mm
Height: 3950 mm
Weight: 52500 kg

Cutting length: 2500 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 15 1/min
Cutting angle: 1°50’ °
Number of downholders: 12 pcs.
Pressure of downholder: 8.5 to
Back gauge: 750 mm
Back gauge speed: 120 mm/s
Motor power: 11 kW
Oiltank: 150 l
Table height: 880 mm
Table width: 500 mm
Stroke: 125 mm
Length: 3300 mm
Width: 2615 mm
Height: 1650 mm
Weight: 4940 kg

Length: 2500 mm
Width: 25 mm
Height: 180 mm

6V Openings: 8/11/12/16/24/36 mm
Length: 2500 mm
Width: 70 mm
Height: 70 mm

pressing capacity: 150 to
Cylinder fix or moveable: fix
Stroke: 350 mm
Distance between columns: 1500 mm
Rapid speed: 22 mm/s
Working speed: 3 mm/s
Length: 2500 mm
Width: 1200 mm
Height: 2500 mm
Weight: 2450 kg

pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Distance between columns: 1500 mm
Rapid speed: 22 mm/s
Working speed: 3 mm/s
Horizontal movable cylinder: 1000 mm
Length: 2500 mm
Width: 1200 mm
Height: 2500 mm
Weight: 2500 kg

pressing capacity: 150 to
Stroke: 500 mm
Table: 1.550 x 2.000 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2350 mm
Width: 2000 mm
Height: 2500 mm
Weight: 4100 kg

pressing capacity: 150 to
Stroke: 500 mm
Table: 2.500 x 2.050 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1400 mm
Hydraulicaly movable stand: 1600 mm
Length: 2900 mm
Width: 2500 mm
Height: 2500 mm
Weight: 5200 kg

pressing capacity: 200 to
Stroke: 500 mm
Table: 2.500 x 2.050 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1450 mm
Hydraulicaly movable stand: 1600 mm
Length: 2950 mm
Width: 2500 mm
Height: 2600 mm
Weight: 6500 kg

pressing capacity: 150 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2500 mm
Width: 1000 mm
Height: 2270 mm
Weight: 2100 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 220x160 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2500 mm
Width: 1000 mm
Height: 2200 mm
Weight: 1600 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 680 mm
Distance between columns: 1520 mm
Rapid speed: 8 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 500x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2350 mm
Weight: 2500 kg

pressing capacity: 100 to
Cylinder fix or moveable: fix
Bending length: 1500 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 680 mm
Rapid speed: 10 mm/s
Working speed: 5 mm/s
Max. bending capacity (mild steel): 6 mm
Table: 500x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2500 kg

pressing capacity: 250 to
Tonnage rating point: 8 mm
Table length: 1400 mm
Table width: 800 mm
Hole in table: 250 mm
Stroke: 23 - 220 mm
Strokes: 25 - 50 1/min
Ram: 950x620 mm
Ram guides: 8
Ram adjustment: 120 mm
Throat depth: 410 mm
Distance between columns: 820 mm
Motor: 33 kW
Length: 1600 mm
Width: 2900 mm
Height: 4250 mm
Weight: 25000 kg

pressing capacity: 125 to
Tonnage rating point: 5.5 mm
Table length: 1100 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 150 mm
Strokes: 42 - 65 1/min
Ram: 700x400 mm
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 610 mm
Motor: 15 kW
Length: 1400 mm
Width: 2200 mm
Height: 3120 mm
Weight: 12500 kg

Punching power: 30 ton
Working area: 2500x1250 mm
X-axis movement (+repositioning): 2500 mm
Y-axis movement: 1250 mm
speed of X-axis: 116 m/Min
speed of Y-axis: 80 m/min
speed combined X+Y: 140 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 425 1/min
Max. strokes at marking: 3200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 120 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 15 kW
Height: 2310 mm
Width without light barrier: 5360 mm
Width with light barrier: 7360 mm
Length without light barrier: 5750 mm
Length with light barrier: 6800 mm
Weight: 12960 kg

Ref. no.: 18142
Hersteller: DEMAG
Year of construction: 1997

Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar

Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg

Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function

Turning diameter: 340 mm
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: good


Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest

Wägebereich: 6000 kg
Breite: 2500 mm
Tiefe: 1250 mm