Cutting length: 3100 mm
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Cutting angle: 1 °
Back gauge: 750 mm
Motor power: 7 kW
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg

Saw frame: Pivot frame
Band dimensions: 3660x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 320x300 mm
Working height: 640 mm
Hydraulic motor: 0.37 kW
Motor: 2 kW
Coolant pump motor: 0.12 kW
Length: 1900 mm
Width: 850 mm
Height: 1300 mm
Weight: 770 kg

Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm

Ref. no.: 17146
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm

Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar

Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg

Linde Cryoline MT1250 Freezing tunnel, Serial: 5-199, 2016, Linde CRYOLINE MT 1250 Cryogen/Nitrogen Tunnel Freezer, a top-of-the-line freezing solution for your industrial needs. This machine boasts a cooling capacity of 100 kW/29.41 tons, ensuring efficient and rapid freezing of your products. The fully stainless steel construction, including a fine stainless steel mesh belt, guarantees durability and hygiene compliance. With a net belt width of 1250 mm and a freezing belt length of 4000 mm, this freezer can accommodate a wide range of products with a maximum height of 100 mm. Equipped with 6 internal high-speed fans that are adjustable, you have full control over the freezing process. The holding time can be set between 0.5 and 20 minutes, providing flexibility based on your specific requirements. The stainless steel switch-board cabinet features a Siemens PLC and HMI Simatic touchscreen for easy operation and monitoring. This Cryoline MT 1250 Cooling Tunnel, manufactured in 2016, o

Schleiflänge: 2500 mm
Schleifbreite: 600 mm
Werkstückhöhe: 800 mm
Tischabmessung: 2500x600 mm
Vertikalweg: 800 mm
Ausladung: 650 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Blechbreite: 4050 mm
Blechstärke: 20 mm
Ständerweite: 4100 mm
Ständerdurchgang: 4200 mm
Hubzahl: 10-20 Hub/min
Arbeitsdruck: 250 bar
Gesamtleistungsbedarf: 85 kW
Maschinengewicht ca.: 43,6 t
Raumbedarf ca.: 5,5x2,8x2,9 m

x-Weg: 13000 mm
y-Weg: 2750 mm
z-Weg: 3000 mm
Drehzahl: 600 U/min
Spindelaufnahme ISO: 50
Fräskopf: 4
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Kernbohrdurchmesser - max.: 200 mm
Bohrtiefe: 3500 mm
Umlaufdurchmesser: 700 mm
Drehzahl: 475 U/min
Lünette: 275 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Kernbohrdurchmesser - max.: 200 mm
Bohrtiefe: 2500 mm
Umlaufdurchmesser: 700 mm
Drehzahl: 475 U/min
Lünette: 370 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2100 kg

Grote AC60M LH sandwich cutter, Serial: 1204501, 2020, Stainless sandwich cutter, belt dimensions 2600mm x 160mm, variable speed main belt and top hold down belt, cuts any sandwich in half accurately and cleanly using a mechanical blade, up to 60 sandwich per minute, mobile, 3Ph

Eillert G1500 belt slicer, stainless frame, 250mm belt width, 3Ph, mobile, with hold down belt, iceberg lettuce, carrots, cucumbers etc, 1Ph

Saw frame: Double column
Band dimensions: 3270 x 27 x 0,9 mm
Band speed continous: 40 - 80 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 330 x 290 mm
Cutting capacity 45°: round 210 mm, square 210 mm, rectangular 210 x 260 mm
Cutting capacity 60°: round 110 mm, square 110 mm, rectangular 110 x 150 mm
Working height: 840 mm
Hydraulic motor: 0.75 kW
Motor: 1.5 kW
Coolant pump motor: 0.06 kW
Length: 3070 mm
Width: 2060 mm
Height: 1930 mm
Transport dimensions: 2400 x 1700 x 1700 mm
Weight: 1210 kg

pressing capacity: 80 to
Tonnage rating point: 4 mm
Table length: 600 mm
Table width: 900 mm
Hole in table: 200 mm
Stroke: 1 - 110 mm
Strokes: 60 1/min
Ram guides: 6
Ram adjustment: 80 mm
Ram hole: 50 mm
Throat depth: 300 mm
Daylight: 400 mm
Motor: 7.5 kW
Length: 1600 mm
Width: 1500 mm
Height: 2750 mm
Weight: 5700 kg

Drilling capacy mild steel: 50 mm
Taper: MK 4
Distance spindle - column: 400 mm
Revs: 45 - 1.115 (9) r.p.m.
Motor: 2.9 kW
Tapping capacity: M36
Feeds: 0,08 - 0,35 (4) mm/r
max. drilling depth: 230 mm
Column diameter: 200 mm
Distance spindle - table: 50 - 850 mm
Distance spindle-base: 1290 mm
Table: 550 x 550 mm
Base dimensions: 1ß6ß x 600 mm
Length: 600 mm
Width: 1200 mm
Height: 2500 mm
Weight: 710 kg

Campo Vibratory conveyor, Stainless, vibro conveyor, conveyor dimensions 1500mm x 500mm, on stainless frame, with dewatering mesh, side discharge, 3Ph

Cutting length: 2025 mm
Max. thickness - mild steel: 3 mm
Back gauge: 500 mm
Motor power: 4 kW
Length: 2500 mm
Width: 1720 mm
Height: 1200 mm
Weight: 1100 kg

NNP cooking kettles, Stainless, cooking and mixing system on skid, two 350L mixing tanks, with Alfa Laval GM1 centrifugal pump and Randolph 600 series peristaltic pump, jacketed tanks, adjustable temperature and variable speed pumps, 3Ph

C and C Cresco Pallet wrapper, Serial: C1900145M, 2019, pallet wrapper, diameter turntable 1650mm, adjustable speed and tension controls, capacity 2000Kgs, with ramp, 1Ph

Agnelli Automatic sheeter, Stainless, Automatic sheeter and kneader, Produces pasta sheets, Up to 250Kgs per hour, Stainless 200Kg agitated hopper, 250mm sheets, variable speed, with spare belt, 3Ph

LR CR-210 Vacuum pump, Liquid ring vacuum pump, Speed 1450, Press/Vac 720mm, Motor 7.5Kw, 3Ph

NNP Stainless conveyor, Stainless, belt dimensions 1750mm x 260mm, side guides, 3Ph

Eriez 56C Vibratory conveyor, Stainless, dimensions 900mm x 450mm, discharge height 1500mm, mobile, 1Ph

Signode 5FAM case taper Top case taper, top and bottom grip belts with side guides, max box 550mm W x 600mm H, 3Ph

Bending length: 3050 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 18 mm

Bending length: 3050 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 11 mm

Bending length: 2500 mm
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm

Bending length: 2500 mm
Max. bending capacity - mild steel: 14
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 8.4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 9 mm

Bending length: 2500 mm
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4.9 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6 mm

Leonhardt AG2 Twin head dosing machine, Serial: 1401449, 2016, Industrial dosing machine, 150Kg stainless agitated hopper, dosing area 200 -750 ccm per cycle and pump position, 6Kw max output, with level sensor, siemens HMI controls, mobile, with manuals and drawings, 3Ph

X: 760 mm
Y: 530 mm
Z: 560 mm
Table size: 1200 x 500 mm
Speed range: 12.000 rpm
Taper fixture: SK 40
Internal coolant: 20 bar
Tool changer: 30 -station
Electrical hand wheel: yes
Chip conveyor: yes
Control: Siemens 828 D
Exhaust unit: yes
Working hour: 17.500 h
Total power: 25 kW
Weight of machine: 8000 kg
Space requirement (W x D x H): 2,4 × 2,0 × 2,8 m
Condition: good, few operating hours

4th axis, swivel table

Accessory: documentation, no further accessories

Robopac Ariane 6050/2TA Lsealer shrink tunnel KN055476 L sealer sealing bars 600mm x 500mm, into shrink tunnel aperture 450mm x 200mm, adjustable controls, mobile, 3Ph

Bending length: 1500 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4 mm

Ref. no.: 18404
Hersteller: ARBURG
Year of construction: 2001

Clamping unit
Clamping force: 130 ton
Opening stroke: 500 mm
Distance between tie bars: 420 x420 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 605 x 605 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 230 cm³
Shot weight: 210 g
Injection pressure: 1670 bar

Measurements and weight
Dimensions: 4,68 x 1,3 x 2,2 m
Machine weight: 4080 kg

Additional information & extras
Core pull: 1 pcs

Bending length: 2000 mm
Max. bending capacity - mild steel: 11
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6.4 mm
Upper roll diameter: 225 mm
Lower roll diameter: 215 mm
Lateral roll diameter: 165 mm
Bending speed: 8 m/min
Length: 3950 mm
Width: 1200 mm
Height: 1200 mm
Weight: 4450 kg

Bending length: 2050 mm
Max. bending capacity - mild steel: 4
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3800 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2450 kg

Heidelberg windmill

Machine size 26x38cm

Weight 600gsm

Speed 5000 sheets/h

Weight 1400kg

Power supply 400V

pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1000 mm
Stroke: 300 mm
Distance between columns: 1020 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Table: 600x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg

Swing over bed: 760 mm
Distance between centers: 3000 mm
Centre height: 380 mm
Spindle bore: 132 mm
swing over cross slide: 520 mm
Width of bed: 560 mm
Spindle nose / DIN55027: 11
Spindle taper: 140 M
Spindle speed steps: 17
Spindle revs: 7,5 - 1015 rpm
Number of feeds: 150
Longitudinal feed range: 0.039 - 18 mm/r
Cross feed range: 0.02 - 9 mm/r
Metric thread range: 0.5 - 180 mm
Inch thread range: 60 - 1/6 Tpi
Module thread range: 0.125 - 45
DP thread range: Array
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 15 kW
Weight: 4470 kg

Drilling capacy mild steel: 50 mm
Taper: MK 5
Distance spindle - column: 360 – 1.250 mm
Revs: 44 – 1.206 (12) r.p.m.
Tapping capacity: Steel/Cast: M40/M50
Distance table - spindle underside: 441 – 1.345 mm
automatic feed: 0,06 – 0,2 (3) mm/min
Spindle motor: 3.7 kW
Column diameter: 300 mm
Quill travel: 270 mm
Table: 1.785 x 785 x 190 mm
Box table dimensions: 635 x 520 x 420 mm
max. height: 2645 mm
Length: 2060 mm
Width: 995 mm
Height: 2240 mm
Weight: 2300 kg

Internal grinding diameter min.: 1 mm
Internal grinding diameter max: 50 mm
Grinding length: 200 mm
Centre height: 132 mm
Tool spindle speed: 150 - 1.500 rpm
Table speed: continuous adjustment up to 10
Dressing device: yes
Spindle speed: 16.500 - 120.000 rpm
Internal grinding spindle: 16.500, 22.000, 33.000 rpm
Paper belt filter: yes
Total power: 3 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 1,8 x 1,1 x 1,8 m
Condition: good

Well-maintained machine from a German automobile manufacturer

Accessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures

Drilling capacy mild steel: 40 mm
Taper: MK 4
Distance spindle - column: 360 mm
Revs: 38 - 1.270 (9) r.p.m.
Motor: 2.2 kW
Tapping capacity: M32
Feeds: 0,10 - 0,40 (4) mm/r
max. drilling depth: 200 mm
Column diameter: 175 mm
Distance spindle - table: 35 - 835 mm
Distance spindle-base: 1240 mm
Table: 550 x 550 mm
Base dimensions: 950 x 550 mm
Length: 550 mm
Width: 950 mm
Height: 2363 mm
Weight: 610 kg

pressing capacity: 40 to
Cylinder fix or moveable: fix
Daylight: 900 mm
Distance between columns: 900 mm
Working speed: 5 mm/s
Length: 1600 mm
Width: 700 mm
Height: 2050 (PSS: 2250) mm

pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Daylight: 750 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2560 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2350 kg

pressing capacity: 30 to
Cylinder fix or moveable: horizontal moveable
Stroke: 200 mm
Distance between columns: 775 mm
Piston diameter: 125x80 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1500 mm
Width: 700 mm
Height: 1800 mm
Weight: 400 kg

Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 6

x-Weg: 710 mm
y-Weg: 510 mm
z-Weg: 510 mm
Steuerung: Mazatrol M 32
Palettengröße: 500x500 mm
Spindelaufnahme ISO: 40
Drehzahl: 50-10000 U/min
Spindelleistung: 7,35 KW
Werkzeugmagazin:: 60
Kühlung durch die Spindel: bar
Anzahl der Paletten: 6
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 8,5 t
Raumbedarf ca.: m

x-Weg: 630 mm
y-Weg: 700 mm
z-Weg: 630 mm
Steuerung: Meldas M650
Aufnahme: HSK-A63
Tischabmessung: 450x450 mm
Tischbelastung: 400 kg
Spindeldrehanzahl: 300 - 20.000 min-1
Gesamtleistungsbedarf: 30 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

x-Weg: 2000 mm
y-Weg: 500 mm
z-Weg: 480 mm
Steuerung: Heidenhain
Typ: TNC 407
Spindelaufnahme ISO: 40
Spindeldrehzahlen: 6000 U/min
Vorschub: 15 m/min
Werkzeugwechsler: 40
Kühlung durch die Spindel: 10 bar
Handrad: elekt.
Teilapparat -schwenkbar: CNC
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m