Categories
-
0
Banderoling machines
-
0
Booklet making machines
-
0
Stapler
-
0
Perfect binder
-
0
Compensating stacker
-
0
Presses
-
0
Saddle stichers
-
0
Cutting machines
-
0
Tables
-
0
Strapping machines
-
0
Accessories and spare parts
Post press machines offers 25
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
8
Post press machinesDie cutter
BOBST SP 102 E
Year 1980
Hour counter: 28.950
achine speed 7500 sheets/hour, max. pressure 250 tons,
workable material: paper 80 - 90 g/m², solid board up to 2000 g/m²,
Can be inspected in production.
BOBST SP 102 E
Year 1980
Hour counter: 28.950
achine speed 7500 sheets/hour, max. pressure 250 tons,
workable material: paper 80 - 90 g/m², solid board up to 2000 g/m²,
Can be inspected in production.
Year 1980
Hour counter: 28.950
achine speed 7500 sheets/hour, max. pressure 250 tons,
workable material: paper 80 - 90 g/m², solid board up to 2000 g/m²,
Can be inspected in production.
12
Post press machinesDie cutter
Nebiolo Atena
Die cutting machine
Max format: 26x76 cm
Nebiolo Atena
Die cutting machine
Max format: 26x76 cm
Die cutting machine
Max format: 26x76 cm
2
Post press machinesDie cutter
Polar Autocut AC25-XT Diecutter
For inline production of die-cut labels, buffering strips, label cutting, die-cutting, banding,
The system containes:
Polar Autocut AC25-XT, Polar Diecutter DC-11, Polar Bundler BD Bander,
More specs on request
Polar Autocut AC25-XT Diecutter
For inline production of die-cut labels, buffering strips, label cutting, die-cutting, banding,
The system containes:
Polar Autocut AC25-XT, Polar Diecutter DC-11, Polar Bundler BD Bander,
More specs on request
For inline production of die-cut labels, buffering strips, label cutting, die-cutting, banding,
The system containes:
Polar Autocut AC25-XT, Polar Diecutter DC-11, Polar Bundler BD Bander,
More specs on request
_thumb.jpeg "Show advert")
2
Post press machinesPile elevators
Polar LW 1000-4 EV lift
Mobile Stack Lift POLAR LW 1000-4 + EV of 1999 (version with side margins for easy storage and material application)
The POLAR Stack Lift LW 1000-4 lift is predominantly employed for handling the medium-size format. Since the material to be cut is lifted automatically, the operator loads the material into the jogger or directly into the cutting machine at an ergonomic height. The lift can also be used for stacking the material. In this case the lift is lowered semi-automatically. This means that the procedure is started manually, but stopped automatically by the light barrier. As it is not necessary to anchor POLAR Stack Lift to the floor they can be easily rearranged.
Customer benefits
Increases the efficiency of the cutting machine by up to 10%, because working height remains constant throughout loading and unloading procedures
Lifting heavy loads is reduced to a minimumOperator's productivity curve remains constant
Substantial reduction of occupational diseases
Technical data
Pallet size : max.800 × 1,200 mm (31.50 × 47.24 in)
Size of platform : 840 × 1,270 mm (33.07 × 50.00 in)
Stroke : max.850 mm (33.46 in)
Lifting height : max. 85 cm
Carrying capacity : max.1,000 kg (2,205 lbs)
Net weight : 550 kg
Floor space (with pallet) : 144x130 cm – height : 150 cm (196 cm with max. lifting height)
Power : 0,75 kW
Polar LW 1000-4 EV lift
Mobile Stack Lift POLAR LW 1000-4 + EV of 1999 (version with side margins for easy storage and material application)
The POLAR Stack Lift LW 1000-4 lift is predominantly employed for handling the medium-size format. Since the material to be cut is lifted automatically, the operator loads the material into the jogger or directly into the cutting machine at an ergonomic height. The lift can also be used for stacking the material. In this case the lift is lowered semi-automatically. This means that the procedure is started manually, but stopped automatically by the light barrier. As it is not necessary to anchor POLAR Stack Lift to the floor they can be easily rearranged.
Customer benefits
Increases the efficiency of the cutting machine by up to 10%, because working height remains constant throughout loading and unloading procedures
Lifting heavy loads is reduced to a minimumOperator's productivity curve remains constant
Substantial reduction of occupational diseases
Technical data
Pallet size : max.800 × 1,200 mm (31.50 × 47.24 in)
Size of platform : 840 × 1,270 mm (33.07 × 50.00 in)
Stroke : max.850 mm (33.46 in)
Lifting height : max. 85 cm
Carrying capacity : max.1,000 kg (2,205 lbs)
Net weight : 550 kg
Floor space (with pallet) : 144x130 cm – height : 150 cm (196 cm with max. lifting height)
Power : 0,75 kW
Mobile Stack Lift POLAR LW 1000-4 + EV of 1999 (version with side margins for easy storage and material application)
The POLAR Stack Lift LW 1000-4 lift is predominantly employed for handling the medium-size format. Since the material to be cut is lifted automatically, the operator loads the material into the jogger or directly into the cutting machine at an ergonomic height. The lift can also be used for stacking the material. In this case the lift is lowered semi-automatically. This means that the procedure is started manually, but stopped automatically by the light barrier. As it is not necessary to anchor POLAR Stack Lift to the floor they can be easily rearranged.
Customer benefits
Increases the efficiency of the cutting machine by up to 10%, because working height remains constant throughout loading and unloading procedures
Lifting heavy loads is reduced to a minimumOperator's productivity curve remains constant
Substantial reduction of occupational diseases
Technical data
Pallet size : max.800 × 1,200 mm (31.50 × 47.24 in)
Size of platform : 840 × 1,270 mm (33.07 × 50.00 in)
Stroke : max.850 mm (33.46 in)
Lifting height : max. 85 cm
Carrying capacity : max.1,000 kg (2,205 lbs)
Net weight : 550 kg
Floor space (with pallet) : 144x130 cm – height : 150 cm (196 cm with max. lifting height)
Power : 0,75 kW
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
4
Post press machinesBinding machines
Renz AP 300 compact
Wiro punching machine
Year 2019
Renz AP 300 compact
Wiro punching machine
Year 2019
Wiro punching machine
Year 2019
7
Post press machinesOther
Samson 104 L pileturner
Lift capacity 1000 kg.
Min. pile height 320 mm (Including pallet).
Max. Pile height 1300 mm (Including pallet).
Min. paper size 450 mm x 320 mm
Max. Paper size 1200 mm x 800 mm
Power 400volts 3 phase
Weight: 725 kg
Samson 104 L pileturner
Lift capacity 1000 kg.
Min. pile height 320 mm (Including pallet).
Max. Pile height 1300 mm (Including pallet).
Min. paper size 450 mm x 320 mm
Max. Paper size 1200 mm x 800 mm
Power 400volts 3 phase
Weight: 725 kg
Lift capacity 1000 kg.
Min. pile height 320 mm (Including pallet).
Max. Pile height 1300 mm (Including pallet).
Min. paper size 450 mm x 320 mm
Max. Paper size 1200 mm x 800 mm
Power 400volts 3 phase
Weight: 725 kg
_thumb.jpeg "Show advert")
5
Post press machinesCollecting machines
Theisen en Bonitz Sprint B312 VP ( 2008)
Year: 2008
- 12 stations
– format: min. 7x10cm, max. 35x50cm
– paper weight: 18-800g/qm
with Theisen en Bonitz 304 QSM
Theisen & Bonitz 304 QSM
Stitching and folding device:
– Motorized format setting
– 2 Hohner stitching heads
– Friction free Knife Fold (cloth system)
– Automatic layer thickness adjustment
– Front cutting device for cutting to 4 cm,
sections greater than 1.5 cm
– Head and foot trimming each from 3 to 20 mm at about 80 pages,
80 g / sqm.
– Power: 400 V, 50 Hz
Theisen en Bonitz Sprint B312 VP ( 2008)
Year: 2008
- 12 stations
– format: min. 7x10cm, max. 35x50cm
– paper weight: 18-800g/qm
with Theisen en Bonitz 304 QSM
Theisen & Bonitz 304 QSM
Stitching and folding device:
– Motorized format setting
– 2 Hohner stitching heads
– Friction free Knife Fold (cloth system)
– Automatic layer thickness adjustment
– Front cutting device for cutting to 4 cm,
sections greater than 1.5 cm
– Head and foot trimming each from 3 to 20 mm at about 80 pages,
80 g / sqm.
– Power: 400 V, 50 Hz
Year: 2008
- 12 stations
– format: min. 7x10cm, max. 35x50cm
– paper weight: 18-800g/qm
with Theisen en Bonitz 304 QSM
Theisen & Bonitz 304 QSM
Stitching and folding device:
– Motorized format setting
– 2 Hohner stitching heads
– Friction free Knife Fold (cloth system)
– Automatic layer thickness adjustment
– Front cutting device for cutting to 4 cm,
sections greater than 1.5 cm
– Head and foot trimming each from 3 to 20 mm at about 80 pages,
80 g / sqm.
– Power: 400 V, 50 Hz
2
Post press machinesCollecting machines
Theisen and Bonitz Sprint B312 VP (2008)
12 stations half pile + 304 QSM three-cutter
Year of construction 2008
Theisen and Bonitz Sprint B312 VP (2008)
12 stations half pile + 304 QSM three-cutter
Year of construction 2008
12 stations half pile + 304 QSM three-cutter
Year of construction 2008
6
Post press machinesDie cutter
Round cornering machine polygraph
Knife radius R7
Robust quality
Round cornering machine polygraph
Knife radius R7
Robust quality
Knife radius R7
Robust quality
7
Post press machinesLaminating machines
Stock A134R-R5PS6M / 1650 x 2050P Laming machine
Sheet to board laminating machine for producing displays and packing material
Stock A134R-R5PS6M / 1650 x 2050P Laming machine
Sheet to board laminating machine for producing displays and packing material
Sheet to board laminating machine for producing displays and packing material
7
Post press machinesCollecting machines
Horizon AC 8000 S collating machine
* collating stations
* suctions feeder
* jogger with cris cross
Horizon AC 8000 S collating machine
* collating stations
* suctions feeder
* jogger with cris cross
* collating stations
* suctions feeder
* jogger with cris cross
8
Post press machinesLaminating machines
Sallmetal Laminating machine
S1050
Max Laminating size: 105 cm
Sallmetal Laminating machine
S1050
Max Laminating size: 105 cm
S1050
Max Laminating size: 105 cm
5
Post press machinesOther
Heidelberg GTP Hot Foil
size 34×46
with Hotfoil
Heidelberg GTP Hot Foil
size 34×46
with Hotfoil
size 34×46
with Hotfoil
 Grey cilinder-1_thumb.jpg "Show advert")
 Grey cilinder-3_thumb.jpg "Show advert")
 Grey cilinder-4_thumb.jpg "Show advert")
 Grey cilinder-5_thumb.jpg "Show advert")
 Grey cilinder-6_thumb.jpg "Show advert")
 Grey cilinder-7_thumb.jpg "Show advert")
 Grey cilinder-8_thumb.jpg "Show advert")
 Grey cilinder-9_thumb.jpg "Show advert")
 Grey cilinder-91_thumb.jpg "Show advert")
10
Post press machinesDie cutter
Heidelberg SBB ( 56×82 cm) Gray cylinder
Very nice Heidelberg SBB cylinder
Fitted with safety covers with switches.
Electronics renewed.
Complete with 2 punch frames
Heidelberg SBB ( 56×82 cm) Gray cylinder
Very nice Heidelberg SBB cylinder
Fitted with safety covers with switches.
Electronics renewed.
Complete with 2 punch frames
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
10
Post press machinesLaminating machines
Stock LM 123
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
Stock LM 123
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
8
Powered Feed Roller
Cutting Shear: 3 knife units
Creasing unit: 8 creasing units
Powered Feed Roller
Cutting Shear: 3 knife units
Creasing unit: 8 creasing units
Cutting Shear: 3 knife units
Creasing unit: 8 creasing units
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
10
Post press machinesOther
GTS Countmaster 1053
With stoke inserter
230 volt
Max stack height: 140 mm
Max paper size: 350 x 600 mm
Min paper size: 45
GTS Countmaster 1053
With stoke inserter
230 volt
Max stack height: 140 mm
Max paper size: 350 x 600 mm
Min paper size: 45
 -1_thumb.jpg "Show advert")
 -2_thumb.jpg "Show advert")
 -3_thumb.jpg "Show advert")
 -4_thumb.jpg "Show advert")
 -5_thumb.jpg "Show advert")
 -6_thumb.jpg "Show advert")
 -7_thumb.jpg "Show advert")
8
Post press machinesPile elevators
Ascon
Model: 1000
Year 2002
Automatic rotating
Afmeting 72 x 115 cm
Capacity 1000 kg
Ascon
Model: 1000
Year 2002
Automatic rotating
Afmeting 72 x 115 cm
Capacity 1000 kg
Model: 1000
Year 2002
Automatic rotating
Afmeting 72 x 115 cm
Capacity 1000 kg
4
Post press machinesLaminating machines
Workingwidth 1500 mm
Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct
Workingwidth 1500 mm
Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct
Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct
_thumb.jpeg "Show advert")
3
Post press machinesDie cutter
Cauhe VA ( 1450 x 1850 mm ) die cutting machine
Model VA
Year of construction 2000
Automatic closing window
Hardened die plate
Cauhe VA ( 1450 x 1850 mm ) die cutting machine
Model VA
Year of construction 2000
Automatic closing window
Hardened die plate
Model VA
Year of construction 2000
Automatic closing window
Hardened die plate
10
Post press machinesLaminating machines
Paperplast international Dry 40
Format: 76x102
Consisting of:
Sheet feeder
Calander
Separator Stacker
Offline heater
Paperplast international Dry 40
Format: 76x102
Consisting of:
Sheet feeder
Calander
Separator Stacker
Offline heater
Format: 76x102
Consisting of:
Sheet feeder
Calander
Separator Stacker
Offline heater
8
Post press machinesCollecting machines
Theisen en Bonitz Sprint HP 320
20 stations High pile collating machine
Complete with pumps
Theisen & Bonitz 303 stitching unit
Equipped with 2 Hohner stitching heads and delivery belt.
Max format: 350 x 50 cm
Theisen en Bonitz Sprint HP 320
20 stations High pile collating machine
Complete with pumps
Theisen & Bonitz 303 stitching unit
Equipped with 2 Hohner stitching heads and delivery belt.
Max format: 350 x 50 cm
20 stations High pile collating machine
Complete with pumps
Theisen & Bonitz 303 stitching unit
Equipped with 2 Hohner stitching heads and delivery belt.
Max format: 350 x 50 cm
10
Post press machinesFolding machines
Morgana Digifold Pro
Folding creasing machine
Morgana Digifold Pro
Folding creasing machine
Folding creasing machine
10
Post press machinesCollecting machines
Muller Laconda 620
– 9 stations collating
– Folding stitching unit: HF 33 c
– complete wit pump
– Year 1990
Muller Laconda 620
– 9 stations collating
– Folding stitching unit: HF 33 c
– complete wit pump
– Year 1990
– 9 stations collating
– Folding stitching unit: HF 33 c
– complete wit pump
– Year 1990
6
Post press machinesOther
Hentong ZKT 700 Window patching machine
Paper length 150-600 mm
Paper width: 200-690 mm
Film length 60-330 mm
Film width 30-380 mm
Machine dimensions: 4200 x 1400 x 1500 mm
Hentong ZKT 700 Window patching machine
Paper length 150-600 mm
Paper width: 200-690 mm
Film length 60-330 mm
Film width 30-380 mm
Machine dimensions: 4200 x 1400 x 1500 mm
Paper length 150-600 mm
Paper width: 200-690 mm
Film length 60-330 mm
Film width 30-380 mm
Machine dimensions: 4200 x 1400 x 1500 mm