Lathe GALLIC (Batch - 1 )
Distance between points: 1000mm

Lathe H.ERNAULT BATIGNOLLES ( Batch - 1)
Distance between points: 1000mm

Lathe CAZENEUVE HB575
Distance between points: 1000mm
+ With visual

MILLING MACHINE GAMBIN 11M ( Batch -1)
With visual

MILLING MACHINE KONDIA Type FV-1

MILLING MACHINE HURON KU5 ( Batch -1)
With visual

Vertical injection moulding machine REP super Sancar
Pression fermeture : 200 T hydraulique
Volume injectable : 630 cm3
Passage moule maxi : 570 mm
Epaisseur moule maxi : 515 mm
Pression sur la matière : 1200 kg
Dimensions :
Hauteur : 3,30m
Largeur : 2,50 m
Profondeur : 1,30 m
Dimensions plateaux :
Fixe : 560 x 510 mm
Mobile : 530 x 510 mm

Injection moulding machine SANDRETTO serie 9 - 165 T
Reference serie 9 165/650
Year 2001
Screw diameter : 38mm
Injectable volume : 250 cm3
Injection Pressure : 2597 bars
Injection speed : 106 cm3/sec
Distance between tie bar : 460 x 460 mm
Platen dimension : 690 x 690 mm
Mold thickness : mini : 155 – maxi : 560 mm
Interface robot
3 core pull
1 air valve
+ SEPRO robot

Billion 200 T injection molding machine
Model : H780 / 200
Year : 1998
Screw diameter: 50mm
Injectable volume : 422 cm3
Injection pressure: 1843 bars
L / D: 22.3
Clamping force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Distance between tie bars (h x v): 610mm x 610mm
Ejection stroke: 150mm
Dimension : 6,1 m x 1,9m x 2,35m
Weight : 9.5 t

Injection moulding machine SANDRETTO serie 9
Clamping force : 230 T
Year : 2001
Screw diameter is 50 mm.
Volume injectable : 475 cm3
Platen dimensions : 860 x 860 mm
Distance between tie bar is : 570 x 570 mm
Dimension are : 6,67 m x 2,22 m x 1,82 m
Weight of the machine : 10 200 KG

Billion 140 T HERCULE injection molding machine
Model : H780 / 140
Year : 2000
Screw diameter: 45mm
Injectable volume : 220 cm3
Injection pressure: 2100 bars
Clamping force: 1400 KN
Platen dimension : 650 x 650 mm
Distance between tie bar : 430 x 430 mm
Platen dimensions (h x v): 610mm x 610mm
Dimension : 5,1 m x 1,8 m x 2,20m
Weight : 7 T

SANDRETTO serie 8 790-200
Clamping force : 200 T
Distance between tie bar : 510 x 510 mm
Mould thickness min / max : 210 - 630 mm
Opening strocke : 550 mm
Injectable volume : 546 cm3
Presure on the plastic material max : 1450 bars
Screw diameter : 55 mm

Injection moulding machine in good condition BM BIRAGHI sintesi 150
Screw diameter : 50 mm
Clamping force : 150 T
Distance between tie bar : 460 x 460 mm
470 mm opening stroke
150 mm min opening mould

Injection moulding machine KRAUSS MAFFEI KM 65-1350
Clamping force : 65 T
Year 1996
Screw diameter : 30 mm
With EUROMAP 12

Billion 50 T PROXIMA injection molding machine
Model : H200/50
DIXIT 2 command
Year : 2001
Screw diameter: 30 mm
Injectable volume : 106 cm3
Injection pressure: 1910 bars
Clamping force: 500 KN
Platen dimension : 580 x 520 mm
Platen dimension : 580 mm x 520 mm
Mould thickness min/max : 180mm x 360 mm
Dimension : 3,52 m x 1,17 m x 1,72 m
Weight : 3,5 T
45000 working hours

INJECTION MOULDING MACHINE KRAUSS MAFFEI 500 H 3500 C1
Working hours : 51 850 hours
Clamping force : 500 T
Year : 2000
Screw diameter : 90 mm
Miximum injection volume : 1953 cm3
Injection pressure max : 1742 bars
Platen dimension : 1270 x 1200 mm
Distance between tie bar : 900 x 800 mm
Mould min thickness : 480 mm
Opening strocke max : 1170 mm
Distance max between platen : 1650 mm
Ejection stroke : 250 mm
Equipement :
Number of heating zone 20 zones
2 core pul on moving platen
2 core pull on fix platen

HMI / new control unit
New metering motor
Locking unit redone
Machine calibration done
New hydraulic hoses

NEGRI BOSSI 480 T
Clamping Force: 480T
reference : 4800 H 3800
Screw diameter: 90 mm
L/D ratio: 20
Maximum material pressure: 1500 bar
Injection volume : 2160 cm3
Injection capacity: 2270 g
Injection speed: 500mm/s
Plastification: 105 g/s
Clearence between tie bars (H x V): 710 x 800
Platen dimensions (H x V): 1190 x 1150
Max mold thickness: 850mm
Minimum mold thickness: 200mm
Ejection stroke: 300mm
Air cores: 2
Hydraulic cores: 2
+ 1 Wittmann Robot
Working hours : 70 000 h

Sandretto injection moulding machine MEGA T 610 T
Reference : 4435 - 610
Command : SEF 100

year :1996
Working hours : 47 200 h
Screw diameter : 80 mm
Volume injectable : 2237 cm3
Injection pressure : 1960 bars
Distance between tie bar : 850 x 850 mm
Platen dimensions : 1260 x 1260 mm
Mould thickness : min : 300 – max : 1000 mm

Interface robot
2 core pull
2 air valve

x-travel: 30000 mm
y-travel: 3600 mm
z-travel: 1900 mm
Control: Heidenhain
Type: TNC 530 i
Milling head - pivoting: CNC
Speed: 4000 rpm
Cone mount: DIN 69871+AD mm
Spindle motor: 46 kW
Feed: 10000mm/min
Rapid traverse: 25000 mm/min
Chip conveyor: 2 pcs.
Panel field: 30000x3000 mm
Total power requirement: 85 kW
Machine weight approx.: t
Space requirement approx.: m

Sheetfed offset machine

2007 Ryobi 524-GX – 4 color- 36 x 52 cm
Ryobimatic
Semi-APC,
PCS-H 4 console

Hans Wahli stream feeder

complete with delivery belt

Polar RAB 4 Jogger

Year: 1998
With automatic side flaps and air removing roller

Polar 78 ES

Year 1996
Chrome air table
Complete with tools and spare knife

Nebiolo Athena die Cutting

size 60×80

Dorit VV3-450 vacuum tumbler, Serial: 941000323, Stainless, 450l vacuum tumbler, variable speed drum, with manual, with vacuum pump, 3Ph

Pokomat P16/320 Injector, Stainless, 16 needle injector, capacity 800Kgs/h, with two sets of needles, belt dimensions 1300mm x 300mm, 3Ph

Frampton FR1-3 Flash roaster, Stainless flash roaster, used when pre cooked meats need to have a roast finish, allows products such as hams to be roasted in under 3mins and still cool enough to be packed, ideal for meats, fish, veg and more, belt dimensions 2100mm x 140mm, variable speed, adjustable temp control, mobile, 3Ph

Bizerba S121 Meat tenderizer Serial: 11437855 2017, can be used as a strip cutter or tenderizing of meat. Ideal for turning fresh meat and cold cuts as well as fruit and veg into fine salads, tabletop, 1Ph

Turbovac TV5575 Dip tank Serial: 20151529 2015, stainless dip tank, shrink tank, platform dimensions 730mm x 535mm, dipping length 300mm, max product height 250mm, max water capacity 130l, max product weight 30Kgs, adjustable temp control, exhaust hood, with outfeed conveyor, mobile, 3Ph

Nock C460 Meat derinder Serial: 1956290 Stainless, cutting width 430mm, cutting speed 19m/min, with 10 spare brand new blades, 0.75Kw, mobile, 3Ph

Temperature range: in Helium 2275 ° C
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good

High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.

Stainless sanitiser tunnel, variable speed, forward / reverse, top mounted jets, side inspection door, conveyor dimensions 3500mm x 300mm, max tray 550mm W x 490mm H, 3Ph

2007, Stainless mixer aerator, 500L, mobile frame, see link for all spec http://www.shufflemix.com/en/aerators/shufflemixer-250-1000/

2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph

Shuffle-mix 250 mixer / aerator, Serial: 200-103 Stainless mixer, 250L, mobile frame, see http://www.shufflemix.com/en/aerators/shufflemixer-250-1000/ for all spec

Seewer Rondo pastry brake, Stainless frame, belt dimensions 3200mm x 640mm, top mounted flour duster, mobile, 3Ph

2016, Stainless lobe pump, 35mm inlet and outlet, 2.2Kw, 3Ph

Bending length: 3200 mm
Sheet thickness (420 N/mm²): 1 mm
Max. thickness - stainless steel: 0.6 mm
Max. thickness - aluminium: 15 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 750 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 4500 mm
Width: 2100 mm
Height: 1650 mm
Weight: 2900 kg

Bending length: 2550 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 750 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 0-20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 3800 mm
Width: 2100 mm
Height: 1650 mm
Weight: 2500 kg

Bending length: 2550 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 1000 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 0-20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 3800 mm
Width: 2350 mm
Height: 1650 mm
Weight: 2500 kg

pressing capacity: 40 to
Table length: 630 mm
Table width: 450 mm
Hole in table: 150 mm
Stroke: 5 - 75 mm
Strokes: 153 1/min
Ram: 415 x 275 mm
Ram adjustment: 68 mm
Ram hole: 40 mm
Throat depth: 230 mm
Daylight: 280 mm
Motor: 4 kW
Length: 1300 mm
Width: 1700 mm
Height: 2150 mm
Weight: 2950 kg

pressing capacity: 600 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 3100 mm
Gap in side frame: 410 mm
Daylight: 700 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 280 l
Motor power: 2 x 11 kW
Length: 5750 mm
Width: 2500 mm
Height: 4000 mm
Weight: 40500 kg

x-travel: 3500 mm
y-travel: 1600 mm
z-travel: 900 mm
Speed: 20-2000 rpm
Spindle mount ISO: SK50
Table dimension: 5000x1000 mm
Control: Heidenhain TNC 426
Spindle drive motor: 22 kW
Rapid traverse: 5000 mm/min
Machine weight approx.: 16 t

Stock LM 123


A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.

Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.

Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.

A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).

Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt

Beck MP 240 X Foil Packaging Machine
Model: Multiplex type MP

Year: 2003

Heidelberg GTP hot foil platen.

Serial GTP 63613
Complete with big hot foil chase

Beck packautomaten,

complete with shrink tunnel

Label Producing BLUMER ATLAS 115,
complete line with die cutting unit D-18 and Bandrolling Machine PB 18.1 incl. strip feeder of Blumer and delivery table behind Blumer, size min: 25×45 mm, max. 150×180 mm,

Top labeller, Stainless, top labelling machine, belt dimensions 1500mm x 90mm, max label width 90mm, height adjustable labelling frame, HMI touch screen control, 1Ph

Stainless elevator screw conveyor, elevates from 500mm to 1800mm, screw diameter 150mm, 3Ph