Hache 1720E Turbidimeter, Hach 1720E Continuous-reading Nephelometric Low Range Process Turbidimeter, Continuously flowing sample flows through the patented bubble removal system, which vents entrained air from the sample stream and eliminates the most significant interference in low level turbidity measurement. The 1720E Turbidimeter is not affected by variations in flow and pressure, The 1720E Turbidimeter uses the sc200 Controller to receive data from up to two sensors. A built-in data logger collects turbidity measurement at user selectable intervals (1-15 minutes), along with calibration and verification points, alarm history, and instrument setup changes for 6 months.

Europ-Plast VCPA315 centrifugal extraction fan, Serial: V9064, 2010, chemical resistant centrifugal extraction fan, 5.5Kw, all fans are manufacturered as direct drive assemblies and all casings are fully welded and come standard with chemical resistant vapor seals

Longwood D screen Fine screen, 2010, Dscreen simple design, operation and maintenance make it the ideal choice for reliable stand alone water filtration, fully enclosed unit, self cleaning screen, 0.8mm screens, Length 1200mm, width 1023mm, 0.37Kw motor, two available

Longwood Rotapak150 Screw compactor, 2010, screw compactor, screenings handling equipment, screw diameter 150mm, capacity 0.5M3/hr, 1.5Kw motor, 3Ph

Lowara 10HM02P11T5RVBE Multistage pump, Serial: 20170110, 2010, Horizontal multistage pump, mounted on stainless frame with Xylem flow meter, 1.23Kw, see plate for full spec

Sigma S2CAHM07120PVT Metering pump, Serial: 2010132518, 2010, 0.25Kw, Metering pumps, 3 in stock

Hoval Air receiver tank, 2010, capacity 500L, working temp -10'C to 45'C, max working pressure 10Bar,

AVK Flanged gate valve, 2010, flanged gate valves with handwheels, 10+ in stock, various sizes

Punching power: 110 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 420/20 bzw. 28/28 mm
Stroke: 80 mm
Strokes: 28 1/min
Flat steel: 600x15 / 400x20 mm
Angle steel: 152x152x13 mm
Round / square steel: 50 mm
Notcher: 13x52x90 mm
Motor: 9 kW
Length: 2690 mm
Width: 1400 mm
Height: 2200 mm
Weight: 3300 kg

Bending length: 1550 mm
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 180 mm
Lower roll diameter: 180 mm
Lateral roll diameter: 150 mm
Bending speed: 1,5 / 6 m/min
Motor power: 5 kW
Length: 3900 mm
Width: 1150 mm
Height: 1250 mm
Weight: 3250 kg

Length: 835 mm

Saw frame: Double column
Band dimensions: 5750 x 41 x 1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 420 mm
Cutting capacity 0° square: 420 mm
Cutting capacity 0° flat: 420 x 420 mm
Working height: 805 mm
Hydraulic motor: 1.1 kW
Motor: 5.5 kW
Servomotor: 1 kW
Coolant pump motor: 0.12 kW
Length: 2860 mm
Width: 1980 mm
Height: 2100 mm
Weight: 3700 kg

Cauhe VA (1450 x 1850 mm) Die Cutter / Cauhe VA Heavy-Duty Large Format Die Cutter

Very neat machine, rarely used.

Max format: (1450 x 1850 mm)
Model: VA
Year: 2008

Available immediately!

Bending length: 2040 mm
Sheet thickness (420 N/mm²): 3 mm
Max. thickness - stainless steel: 2 mm
Max. thickness - aluminium: 4.5 mm
Antrieb: Motorized
Motor bending beam: 1.5 kW
Upper beam motor: 1.1 kW
Back gauge: 750 mm
Opening of upper beam: 140 mm
Bending speed: 50 °/sek
Length: 3060 mm
Width: 1650 mm
Height: 1500 mm
Weight: 2730 kg

Polar 92 XT

Year: 2007
Touch screen control

Normal and small clamping plate
Knife change tools
Spare knives
Big right side table
P-net Netwerk integration P-N V1.1.2

Walther CN - 550 -PN Gleitschleifanlage u. Rösler Z300 Turbo Floc Zentrifuge<br /><br />-Walther Trowal CN-550-PN<br />-1460 U/min<br />-550 Liter Fassungsvermögen<br />-Motor 3,5 KW<br />-Pneumatischer Schallschutzdeckel<br />-Schaltschrank<br />-Schmutzwasser / Ablasseinrichtung<br />-Compound - Gleitsteine 2xBoxen<br />-Dokumentation<br />-Abmaße: LxBxH 2x1,8x1,8 Meter / Gewicht 1500Kg<br /><br />-Rösler - Z300 Turbo-Floc / Zentrifuge<br />-Baujahr 1996<br />-Rotordrehzahl 3160 U/min<br />-Leistung 4 KW<br />-Max. Durchsatzleistung 800 / Liter/ Stunde<br />-Dokumentation<br />-Abmaße LxBxH 1,7x1x1,6 Meter / Gewicht 400Kg<br /><br />Bvticjyuvm

Spiralbohrerschleifmaschine DAREX SP 2500

-Schleifdurchmesser 1,5-16mm
-3x Werkzeugaufnahmen
-1x Ersatzschleifscheibe
-Maschinenunterbau
-Dokumentation

Abmaße:
LxBxH 0,5x0,5x1,6 Meter / Gewicht 80Kg

For Sale: 2x Gardner Denver DLR 300 Pumps with Control Cabinet and Mounting Plates

Brand/Model: Elmo Rietschle / Gardner Denver DLR 300
Year of Manufacture: 2010
Capacity: 300 m³/hour
Pressure: 1.4 bar
Power: 11 kW per pump
Year: 2010
Includes:
Control cabinet with Siemens S7 PLC and pre-installed program
2x Danfoss VLT frequency regulators (11 kW each)
2 mounting plates for pump installation
Condition: Removed in working condition from an industrial facility
A well-maintained set, ideal for various industrial applications.

📩 Contact us for pricing and more details!

D&K Europa System B2 Laminator automatic laminating machine

Technical data:
Max sheet size: 540mm x 740mm
Min sheet size: 210mm x 220mm
Min grammage: 115 gsm
Max grammage: 400 gsm
Operating temperature: 80-145°C
Weight: 750 kg
Power supply 380V
Steel, chrome-plated cylinder
Pneumatic pressure, separation and automatic feeding from a high stack.
Sheet feeding accuracy: ±2.0mm.
Touch panel for easy operation.
Sheet straightening module.

Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm

Drilling capacy mild steel: 30 mm
Taper: MK 3
Distance spindle - column: 250 mm
Revs: 245 - 4000 r.p.m.
Tapping capacity: M25
max. drilling depth: 120 mm
Column diameter: 100 mm
Distance spindle - table: 85 - 635 mm
Distance spindle-base: 1.195 mm
Table: 300 x 270 mm
Base dimensions: 600 x 380 mm
Length: 400 mm
Width: 655 mm
Height: 1185 mm
Weight: 280 kg

Horizon BQ 470

With Nordson
Pur unit

Saw frame: Double column
Band dimensions: 5000 x 34 x 1,1 mm mm
Band speed continous: 20 - 120 m/min
Cutting capacity 0° round: 330 mm
Cutting capacity 0° square: 330 mm
Cutting capacity 0° flat: 350 x 330 mm
Working height: 845 mm
Hydraulic motor: 1.1 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2815 mm
Width: 1935 mm
Height: 1855 mm
Weight: 2560 kg

Saw frame: Double column
Band dimensions: 5750 x 41 x 1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 520 x 460 mm
Working height: 585 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3000 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1650 kg

Horizon BQ 260

Brand: Horizon
Type: BQ 260

Single clamp perfect binder

Citoborma 280

2 head paperdrill

OMM creasing machine

Punching power: 55 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 mm
Angle steel: 120x10 mm
Round / square steel: 40 mm
Notcher: 10 mm
Motor: 5 kW
Length: 1670 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1390 kg

Duplo Docucutter DC-645 Creaser, cutter

Polar RA 2 vibration table

Year of construction: 2008
With extortion



The Polar RA 2 vibrating table is an essential addition to any print shop that strives for maximum efficiency and precision in paper handling. With a size of 72×87 cm, this vibrating table offers enough space to align large stacks of paper quickly and evenly, ensuring flawless processing in subsequent processes.

Key Features:
Air-Driven Roller : The built-in air-pressure roller helps distribute the paper evenly, resulting in a perfectly aligned stack without damage.
Maximum Stack Height of 16.5 cm : The Polar RA 2 can handle stacks up to 16.5 cm high, meaning fewer interruptions and higher productivity.
Chrome Blower Plate : The chrome blower plate reduces friction and protects the paper, while the integrated blowers provide efficient and precise air delivery.
Automatic side flaps :
This vibrating table is ideal for printers and paper converting companies that strive for perfection and reliability in their production processes. The Polar RA 2 ensures consistent quality and optimizes the workflow, saving you time and costs.

Knorr ABS-145-6-R Unloader

Max format: 145 cm
Year 1997
Right side unloader.

Knorr L 1000-6 W lift

Max pallet Weight : 1000 Kg
Pallet size max: Big size: 100 x 145 cm

With photocell for automatic height adjustment/ lifting

Horizon APC-T61 Paper Cutter

Key Features:

Model: Horizon APC-T61
Maximum Cutting Width: 61 cm
Safety: Equipped with photocell safety beam guards
Operation: User-friendly control panel for precise operation
Condition: Fully cleaned, serviced, and tested
Design: Compact and durable construction for long-lasting performance
Additional Details:

Ideal for small to medium-sized print shops and finishing operations
Highly reliable and accurate for cutting paper, card, and similar materials
Ready for immediate use

Polar Mohr 66 Programmable Guillotine (2001)

Key Features:

Model: POLAR 66
Year: 2001
Maximum Cutting Width: 66 cm
Ownership: Single-owner machine since new
Condition: Fully cleaned, checked, serviced, and tested
Programs: Digital programmable control for precision cutting
Safety: Equipped with safety beam guards for operator protection
Accessories:
Two steel side tables
One spare blade

Polar 115 E

Year: 2001

Chrome table with air
side tables: 2x 1m2 resopal with air

Knife change tools
spare knife

WEILER LZ 330 aus Bildungseinrichtung

-Drehdurchmesser über Bett 330
-Drehdurchmesser über Support 165mm
-Drehlänge 800mm
-Drehzahlbereich / Stufenlos 25-2800 1/min
-Automatische Längs / Planvorschübe
-Antriebsleistung ca. 3Kw

-Multifix mit Einsätzen
- 2x Dreibackenfutter
- 1x Vierbackenfutter
- 1x Planscheibe
- Spannzangeneinrichtung mit Spannzangen
- Diverses Zubehör
- Dokumentation

Abmaße:
LxBxH 1,8x0,7x1,6 Meter / Gewicht 750Kg


Irrtümer / Eingabefehler vorbehalten
Bsc929Gqgbi

Werkzeugfräsmaschine MAHO MH 800

-Verfahrwege X/Y/Z 700-350-450mm
-Tischfläche 940x510mm
-Spindelaufnahme SK 40
-Spindeldrehzahlen 32-1600 U/min
-Automatische Längs / Quervorschübe
-Automatischer Vorschub / Vertikalfräskopf
-Kühlmitteleinrichtung
Cpm3Ylytuw
-Diverse Werkzeugaufnahmen
-Weitere technische Daten / Siehe Fotos

Abmaße:
LxBxH 1.9x1,7x1,9 Meter / Gewicht: 3500Kg

Punching power: 110 ton
Throat depth: 300 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x20 (28x28) mm
Stroke: 80 mm
Strokes: 17 1/min
Flat steel: 600x15 (400x20) mm
Blade length: 605 mm
Angle steel: 152x152x13 mm
Round / square steel: 50/50 mm
Notcher: 90x52x13 mm
Motor: 5 kW
Length: 2130 mm
Width: 1200 mm
Height: 2200 mm
Weight: 2500 kg

Saw frame: Pivot frame
Band dimensions: 5200x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 440 mm
Cutting capacity 0° square: 440 mm
Cutting capacity 0° flat: 610x440 mm
Cutting capacity 45°: rund 410 mm, quadrat 410 mm, rechteck 410 x 440 mm
Cutting capacity 60°: rund 320 mm, quadrat 250 mm, rechteck 250 x 440 mm
Cutting capacity - 45°: rund 410 mm, quadrat 410 mm, rechteck 410 x 440 mm
Cutting capacity - 60°: rund 320 mm, quadrat 285 mm, rechteck 285 x 440 mm
Working height: 860 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2800 mm
Width: 1210 mm
Height: 1870 mm
Weight: 1540 kg

Punching power: 50 ton
Throat depth: 177 mm
Number of stations: 5
Cylinder: 1
Max. diameter at sheet thickness (mild steel): 31 x 12 mm
Strokes: 34 1/min
Flat steel: 350 x 15 mm
Angle steel: 80 x 8 mm
Round / square steel: 35 / 30 mm
Notcher: 10 mm
Bending unit: 100 x 10 mm
Motor: 3 kW
Length: 1300 mm
Width: 1100 mm
Height: 1850 mm
Weight: 950 kg

Description
Automatic production of display cards, calendar backs, game boards or luxury packaging. in large format : 1062x 765 mm

Equiped :

PPA 290 Pallet feeder or manual feeding
Copilot System with touchscreen
Miss cloth control during the separation process
Viscositycontrol
Active Line Module for energetic recovery of operating power in the line network
Safety standard according to CE directives and specifications
Template for preparing rubber pads (devise for fitting teh rubber pad on its plate outside the machine

Technical Details
Case size min: 300 x 210 x 1 mm
Case size max : 1092 x 735 x 4 mm
Cloth width: 295 - 1092 mm
Cloth height: 205 - 765 mm
Mechanical speed max: 40 cycles/min
PressurePressure needed: 25 Nm3/h, 6 bar
Turn-in width, closed: 10 - 20 mm

Machine is in very good conditon and visible in production.

Price, and more pictures on request
Directly available

Bobst Domino 100 M

Maximum open blank width: 1000 mm,
Straight Line, Automatic crash lock bottom,
Glue disc,
HSS point glue unit with 4 glueing heads

Sheet Thickness - mild steel: 0.6 - 4 mm
Max. sheet width: 300 mm
Max. cross-section: 900 mm
Feed roll diameter: 80 mm
Motor torque: 10 Nm
Motor: 2.62 kW
Length: 1000 mm
Width: 800 mm
Height: 1400 mm
Weight: 330 kg

Working width: 650
Sheet thickness range - mild steel: 0,5 - 170 mm
Grinding belt dimensions: 670 x 2200 mm
Suction capacity: 4000 m³/h
Connection for dust collector diam.: 120 mm
Air connection: 6 bar
Noise level: 83 dB
Motor: 22 kW
Length: 2600 mm
Width: 1350 mm
Height: 2100 mm
Weight: 1125 kg