YVROUD extruder

In good condition
Dimensions: 2780mm x 1020mm x 1820mm

Machine: DEMAG 650T
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg

BATTENFELD FISCHER – VK 1-4

FISCHER BATTENFELD
Reference: VK 1-4
Number Of Heads: 2
Screw diameter: 60mm
L/D: 24
Thickness control: MOOG 32 point
Center distance: 100 mm
Year: 1997
In good working order

Souflleuse MOB 20 litres

Type: MOB 20 liters
Year: 1990 redone in 2000
Passage between column: 425 x 400 mm
Minimum thickness: 210 mm
Opening stroke: 660 mm
Screw diameter: 80 mm – L/D: 25 mm
Parison: 14 points
1 core

Brand: BEMACO
Model: BA 200
Year: 1994
Clamp force: 800
Type: 200 ltr, accumulator head technology
Extruder: 130 mm, 24 L/D
Head: 20 ltr
Min/max Die diameter 120 - 400
Mould platens: 1320 x 800(maximum daylight 1600)
Bottom blow-pin: included
Overall dimensions (length
x width x height 8000 x 4000 x 6500
Control Siemens SIMATIC OP 396
Programmer
Siemens S5 100U/103CPU 32
points

Brand : JUNGHEINRICH
Type : ETV A 13.5 G E 115 - 820 - DZ
Height lifting : 8 300 mm
Battery : OK
Revised material
Correct condition
New stabulizer wheels

Electrical forkliftfenwick T18
Batterie ok
revised material

Hz : 50
Brand : Hydrovane
Series : Série HV
Description : Hydrovane Hypac (Série HV)
Compressed air gas
Minimum pressure (Bar g) : 6
Min/Max pressure (Bar g) : 8 à 10
Engine power (kW) : 11
Noise level (DB) : 69
Lenght (millimètres) : 825
Width (millimètre) : 1135
Size (millimètres) : 1390
air exits (fingers) : 0.75
Weight (kilograms) : 412
Speed (T/MN) : 1450
Oil capacity (l) : 7
Cooling system : with air
Cleaned air (mg/m3) : <1
Air production = 1.74 m3/mins
Speed (rpm): 1450
Use pressure: 10 Bar g,
Air production = 1.5 m3/mins

Working hours : 32 385 hours
230v - 1 - 50 HZ - PE
Very good condition

USED Engel ​D​uo 940M/940H/650 combi M

Year: 2010

BILLION 200 TONS H1300/200 Injection molding machine

For specifications see attached PDF

ARBURG 130 TONS.

- Year 2001
- Type : 470 C - 1300 - 675
- Screw diameter : 40 mm
- 1 corepuller
- Interface robot
- In between columns : 470 x 470 mm

SUMITOMO ELECTRICAL 75 TONS

- Year : 2000
- Type : SE75S
- In between columns : 360 x 360 mm
- Opening stroke : 300 mm
- Screw diameter :25 mm
- Injection volume : 56 cm3

KRAUSSMAFFEI 200 T -

- Type : KM700-200
- Year : 1998
- In between columns : 560 x 560 mm
- Screw diameter : 45 mm
- Ijnection volume : 305 cm3
- 3 core
- Interface robot
- Equiped with a peak cons
- 1 accumulator
- 8 heating zones

NEGRI-BOSSI 370 TONS

Type: 3700H-2200

Specifications see attached PDF

USED NESTAL 150 TONS

N580/150-MP

See attached PDF

BILLION Bi material H6860/2000-550 TONS

Working hours: 32000
Very good condition

INJECTION 1: H6860

Screw diameter: 105 mm
Ration L/D - 20
Injectable volume: Cm3 4546
Injection pressure: 1509 BAR
Max injection ration: 2160 Cm3/s
Max speed screw rotation Min-1 150

INJECTION 2: H200

Screw diameter: 70mm
ration L/D - 23,1
Injectable volume: 1097 Cm3
Injection pressure :1822 BAR
Max injection ration: 845 Cm3/s
Max speed screw rotation Min-1 200

CLAMPING
Clamping force: 550 Tons
MinimumThickness mould: 300 mm
Maximun Thickness mould: 1000 mm
Opening stroke: 1100 mm
Plates dimensions H x V: 1350 x 1350 mm
In between columns H x V : 930 x 930 mm
Maximun distance between pltes : 2100 mm

Weight
Total weight kg: 26500
Clamping weight kg:15000
Injection weight kg: 14800

In working conditions
Working hours: 12.022

Clamping force: 3000 kN
Opening stroke: 405 mm.
Ejector stroke: 105 mm.
Ejector force: 20,1 kN

Pump drive power: 37 kW
Screw diameter: 60 mm.
Max. swept volume: 735 mc3
Screw speed max.: 226 r/min
Injection rate: 351 cm3/s
Injection rate increased: 283 cm3/s
Injection pressure: 1481 bar.
Spec. injection pressure increased: 1835 bar
Nozzle stroke: 500 mm.
Nozzle cont. pressure: 110 kN

GENERAL INFORMATIONS

Dimensions: 6200 x 2150 x Ht.2400 mm
Weight: 13500 kg
Engine power: 75 kw

- INJECTION UNIT
Plasticising capacity: (PS) 682 gr
Ration length diameter: 23,7
Injection pressure: 2000 bar
Scew diametre: 60 mm

- CLOSING UNIT
Plates dimensions: 995 x 1050 mm
In between columns: 630 x 630 mm
Clamping force: 280 TONS

COMMENTS
workings hours: 37000
Interface robot - 1 core

-INJECTION UNIT:
Plasticising capacity: (PS) 50 gr/s
Screw speed: 250 rpm
Ration length diameter: 23 mm
Injection pressure: 2200 bar
Number of temperature zones: 4
Scew diametre: 52 mm
Maximum injection rate: 190 cc/s
Injection volume: 640 cm3
- CLOSING UNIT:

Plates dimensions: 870 x 790 mm
In between columns 570 x 510 mm
Thickness mould mini/max: 200 / 630 mm

COMMENTS:
NEGRI-BOSSI 210 T : Very good condition
Working Hour: 34808

Theisen en Bonitz Sprint HP 320

20 stations High pile collating machine
Complete with pumps

Theisen & Bonitz 303 stitching unit
Equipped with 2 Hohner stitching heads and delivery belt.
Max format: 350 x 50 cm

Heidelberg Stahfolder T52-4

Year: 2003
Tremat feeder
Without pumps

Perfect Match
Aquaflex + Aqua

The Dantex Aqua is specifically intended for processing and drying water washable printing plates and has been designed to provide exceptional plate quality, combined with minimal maintenance. It is robustly constructed and provides reliable & consistent operation day after day.

AQUA 760 FEATURES FOR YOUR BENEFIT

Plate size (width x length) mm 762 x 635
Power 8kW (400V 3ph + N + E @12 amps)
Unit dimensions* (L x W x H) mm 4189 x 1500 x 1125
With extended drying 5226 x 1500 x 1125
With extended drying (short version) 4486 x 1500 x 1125
Max. plate thickness 1.7 mm

Processing time: 30 min. (900 mm x 1200 mm x 100 mm / min.)
Fresh water or tank system for washing out flexographic printing plates
Very easy handling and maintenance
Chain drive system
Adjustable surfactant dosage and water flow rate
Double wash head with programmable speed
User friendly interface
Extended drying option

Muller Laconda 620

– 9 stations collating
– Folding stitching unit: HF 33 c
– complete wit pump
– Year 1990

Hugo Beck Flexo 500 S-e + Tunnel

Manufacturer: Hugo Beck
Type: Flexo 500 S-e + SLB 5012 / 25e
Year of construction: 2008

Film wrapping machine with film width max. 500 mm
Product feed manual as stand-alone machine or automatic in line
Material used Film PE, PO, bio-films, half-tube and flat film
Product dimensions Length from 45 mm, width 10 - 450 mm, height max. 250 mm
Shrink tunnel Hugo Beck SLB 5015 / 23e
Input and output belt 100 cm

Heidelberg Sm 52 Platepunch
Year: 2000

Polar LW 1000-4 paper stack lift

Year: 1998
Capacity : 1000 kg
Max pallet size: Pallet size 1200 × 800
Power supply: 380V

Automatic lifting cycle controlled by photocell or manual mode, fast work.

Becker DVT 3100

Year: 2007

Type: ROTARY VANE PRESSURE/VACUUM PUMP

Nominal pumping speed/volume flow: 100/120 m3/h
Max. vacuum: 600 mbar
Max pressure: 600 mbar
Nominal motor rating:4.4 / 5.45 KW
Nominal motor speed: 1420 / 1720 / min

Hugo Beck Flexo 500 S e

Automatic shrink wrapping machine

Year: 2008
Control: touch screen
Condition: very good

Shrink tunnel also available Hugo Beck SLB 5012/25-e

Manfred rachner R1000 PA R+S

Year: 2002
Type: R1000 PA R+S
Functions: Turning + vibrating + blowing

Hentong ZKT 700 Window patching machine

Paper length 150-600 mm
Paper width: 200-690 mm
Film length 60-330 mm
Film width 30-380 mm

Machine dimensions: 4200 x 1400 x 1500 mm

Rietschle SKG 314-2.02

Type: Side channel blower

Nominal pumping speed/volume flow: 420 m3/h
Max. vacuum: -195 mbar
Max pressure: +230 mbar
Nominal motor rating:4 KW
Nominal motor speed: 2850 /min

Mueller Martini Concept

Year: 1996
Unwind 50 Inch
Printing Units 4 x 24 inch
and 4 x 25 inc

Unigraphica stacker
and a sheeter 2088 for DinA4 or possible to lengthen A3 or A2

There is also a unit available where placemats were printed in the past.

Theisen en Bonitz Flex B315 VP

– T&B Flex 315 VP year 2005
– T&B 304 QSM year 2005

Variable pile up to 30 cm pile height,
stitch, fold, knife trim unit 303 QSM.

Equipped with 2 Hohner stitching heads and delivery belt.
Max format: 350 x 50 cm
In good condition

Baumann BSW 2-500 LV pile turner
Year: 2008

With air and adjustable vibration function.

Format max: ± 620 x 940 mm
Minimum platform opening / pallet height : 440 mm
Maximum platform opening / pallet height : 1200 mm
Max pallet weight: 500 KG

Heidelberg : SM52-4H UV Anicolor
Bouwjaar : 2011
Machine nummer : GS000637
Imperssions: : 48.400.250

• Press Center
• Autom. Roller wash up device for all rollers
• InkStar Compact
• CombiStar Compact combination unit for dampening soulution and ink temperature control, watercooled incl. AlcoSmart
• Heidelberg Autoplate
• Ink chanber for color unit Anicolor
• Delivery: low pile, extended
• powder sprayer: Weko AP 110
• CombiStar DryStar
• PowderStar
• Flexibility Package - that includes:
• Thicker material 0,6 mm (incl. Sheet brake)
• Antistatic Static Star Compact,
• Alcolor Vario
• 2 add. Feeder and delivery stack Waggons
• Instant Gate
• Anicolor watercooled
• IST UV interdeck Dryer
• IST UV Enddryer
• Incl. Offline Automated washers ink Chamber blade

Strapex TP 502

Year 2003
230 volt

Minipack Torre RP 55

MANUAL HEAT-SHRINK - SEALING BAR 540X390 MM

Available dimensions of the sealing bars: 540x390 mm
MAX product size: 500x380x200 mm
Maximum reel dimensions: (Ø x length) Ø250x600 mm
Work Surface Height: 925 mm
Machine dimensions: (open hood) 1260x810x1310 mm
Machine dimensions: (closed hood) 1260x810x1165 mm
Weight: 126 kg

Screw compressor GRASSAIR RLR 30 22 KW

Year: 2005
Max pressure: 9.25 bar
Wieght: 600 kg
Kw: 22

Complete with: Oil Water Separators

ATS US 2000

The powerful, proven and universally applicable standard banding machine with ultrasonic technology.

With box of banding material

Morgana Major

Folding + creasing machine
In good condition

220 volt

Poar D 66 ECO papercutter
Complete with tools and books
in good wokring condition
Year: 2020

Ryobi 522 HE
Year 2006

Ryobimatic Dampening
Technotrans Alpha D. Cooling Device
Double Sheet Control
SAPC Semi -Automatic Plate Change
Automatic Blanket Washing Device
Automatic Ink Roller Washing Device
Impressions: ca. 35 Mio. (53 mio. revolutions)

Hyster E 3.00 XM

Year : 2007
Max. lifting capacity: 3 ton
Weight: ± 5170 kg
Fork lenght: 110 cm

Ryobi 522 HE
Year 2006

Ryobimatic Dampening
Technotrans Alpha D. Cooling Device
Double Sheet Control
SAPC Semi-Automatic Plate Change
Automatic Blanket Washing Device
Automatic Ink Roller Washing Device
Impressions: ca. 35 Mio. (53 million revolutions)

Polar 155 ED cutting line,


Year of manufacture: 1998
- Polar 155 ED with extended table. (Max size behind knife 200 cm)
- Polar charger (left), type: 3BL185-6
- Polar stacker ( right ), type TR160ER-6