2
Metal working and machine toolsLathes
Swing over bed: 630 mm
Distance between centers: 2000 mm
Centre height: 315 mm
Spindle bore: 103 mm
swing over cross slide: 430 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 11
Spindle taper: 120 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 16 - 63, 63 - 250, 315 - 1.250 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: 060 - 1/4 Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 3310 kg
Swing over bed: 630 mm
Distance between centers: 2000 mm
Centre height: 315 mm
Spindle bore: 103 mm
swing over cross slide: 430 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 11
Spindle taper: 120 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 16 - 63, 63 - 250, 315 - 1.250 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: 060 - 1/4 Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 3310 kg
Distance between centers: 2000 mm
Centre height: 315 mm
Spindle bore: 103 mm
swing over cross slide: 430 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 11
Spindle taper: 120 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 16 - 63, 63 - 250, 315 - 1.250 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: 060 - 1/4 Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 3310 kg
6
Metal working and machine toolsLathes
Swing over bed: 325 mm
Distance between centers: 1000 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Spindle speed steps: 12
Spindle revs: Array rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: Array
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Length: 2150 mm
Width: 950 mm
Height: 1350 mm
Weight: 770 kg
Swing over bed: 325 mm
Distance between centers: 1000 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Spindle speed steps: 12
Spindle revs: Array rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: Array
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Length: 2150 mm
Width: 950 mm
Height: 1350 mm
Weight: 770 kg
Distance between centers: 1000 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Spindle speed steps: 12
Spindle revs: Array rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: Array
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Length: 2150 mm
Width: 950 mm
Height: 1350 mm
Weight: 770 kg
1
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 170 ton
Min. angle steel: 40x40x4 mm
Max. angle steel: 65x65x7 mm
Amount of punching units: 2
Max. diameter at sheet thickness (mild steel): 25/5 bzw- 18/7 mm
Cutting power: 350 to
Motor: 5 kW
Max. pressure: 265 bar
Oiltank: 70 l
Punching power: 170 ton
Min. angle steel: 40x40x4 mm
Max. angle steel: 65x65x7 mm
Amount of punching units: 2
Max. diameter at sheet thickness (mild steel): 25/5 bzw- 18/7 mm
Cutting power: 350 to
Motor: 5 kW
Max. pressure: 265 bar
Oiltank: 70 l
Min. angle steel: 40x40x4 mm
Max. angle steel: 65x65x7 mm
Amount of punching units: 2
Max. diameter at sheet thickness (mild steel): 25/5 bzw- 18/7 mm
Cutting power: 350 to
Motor: 5 kW
Max. pressure: 265 bar
Oiltank: 70 l
5
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 - 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 - 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 - 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 6200 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3200 kg
Bending length: 6200 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3200 kg
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3200 kg
6
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 5020 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 3 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
Bending length: 5020 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 3 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 3 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
4
Metal working and machine toolsPressesEccentric presses
pressing capacity: 250 to
Tonnage rating point: 8 mm
Table length: 1400 mm
Table width: 800 mm
Hole in table: 250 mm
Stroke: 23 - 220 mm
Strokes: 25 - 50 1/min
Ram: 950x620 mm
Ram guides: 8
Ram adjustment: 120 mm
Throat depth: 410 mm
Distance between columns: 820 mm
Motor: 33 kW
Length: 1600 mm
Width: 2900 mm
Height: 4250 mm
Weight: 25000 kg
pressing capacity: 250 to
Tonnage rating point: 8 mm
Table length: 1400 mm
Table width: 800 mm
Hole in table: 250 mm
Stroke: 23 - 220 mm
Strokes: 25 - 50 1/min
Ram: 950x620 mm
Ram guides: 8
Ram adjustment: 120 mm
Throat depth: 410 mm
Distance between columns: 820 mm
Motor: 33 kW
Length: 1600 mm
Width: 2900 mm
Height: 4250 mm
Weight: 25000 kg
Tonnage rating point: 8 mm
Table length: 1400 mm
Table width: 800 mm
Hole in table: 250 mm
Stroke: 23 - 220 mm
Strokes: 25 - 50 1/min
Ram: 950x620 mm
Ram guides: 8
Ram adjustment: 120 mm
Throat depth: 410 mm
Distance between columns: 820 mm
Motor: 33 kW
Length: 1600 mm
Width: 2900 mm
Height: 4250 mm
Weight: 25000 kg
4
Metal working and machine toolsPressesEccentric presses
pressing capacity: 200 to
Tonnage rating point: 7 mm
Table length: 1350 mm
Table width: 800 mm
Hole in table: 250 mm
Stroke: 18 - 180 mm
Strokes: 35 - 50 1/min
Ram: 900x570 mm
Ram guides: 8
Ram adjustment: 110 mm
Throat depth: 410 mm
Distance between columns: 820 mm
Motor: 22 kW
Length: 1500 mm
Width: 2633 mm
Height: 3950 mm
Weight: 20000 kg
pressing capacity: 200 to
Tonnage rating point: 7 mm
Table length: 1350 mm
Table width: 800 mm
Hole in table: 250 mm
Stroke: 18 - 180 mm
Strokes: 35 - 50 1/min
Ram: 900x570 mm
Ram guides: 8
Ram adjustment: 110 mm
Throat depth: 410 mm
Distance between columns: 820 mm
Motor: 22 kW
Length: 1500 mm
Width: 2633 mm
Height: 3950 mm
Weight: 20000 kg
Tonnage rating point: 7 mm
Table length: 1350 mm
Table width: 800 mm
Hole in table: 250 mm
Stroke: 18 - 180 mm
Strokes: 35 - 50 1/min
Ram: 900x570 mm
Ram guides: 8
Ram adjustment: 110 mm
Throat depth: 410 mm
Distance between columns: 820 mm
Motor: 22 kW
Length: 1500 mm
Width: 2633 mm
Height: 3950 mm
Weight: 20000 kg
4
Metal working and machine toolsPressesEccentric presses
pressing capacity: 125 to
Tonnage rating point: 5.5 mm
Table length: 1100 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 150 mm
Strokes: 42 - 65 1/min
Ram: 700x400 mm
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 610 mm
Motor: 15 kW
Length: 1400 mm
Width: 2200 mm
Height: 3120 mm
Weight: 12500 kg
pressing capacity: 125 to
Tonnage rating point: 5.5 mm
Table length: 1100 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 150 mm
Strokes: 42 - 65 1/min
Ram: 700x400 mm
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 610 mm
Motor: 15 kW
Length: 1400 mm
Width: 2200 mm
Height: 3120 mm
Weight: 12500 kg
Tonnage rating point: 5.5 mm
Table length: 1100 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 150 mm
Strokes: 42 - 65 1/min
Ram: 700x400 mm
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 610 mm
Motor: 15 kW
Length: 1400 mm
Width: 2200 mm
Height: 3120 mm
Weight: 12500 kg
4
Metal working and machine toolsPressesEccentric presses
pressing capacity: 70 to
Tonnage rating point: 4 mm
Table length: 920 mm
Table width: 500 mm
Hole in table: 180 mm
Stroke: 12 - 120 mm
Strokes: 50 - 80 1/min
Ram guides: 8
Ram adjustment: 80 mm
Throat depth: 260 mm
Distance between columns: 560 mm
Motor: 7 kW
Length: 1225 mm
Width: 1865 mm
Height: 3060 mm
Weight: 7000 kg
pressing capacity: 70 to
Tonnage rating point: 4 mm
Table length: 920 mm
Table width: 500 mm
Hole in table: 180 mm
Stroke: 12 - 120 mm
Strokes: 50 - 80 1/min
Ram guides: 8
Ram adjustment: 80 mm
Throat depth: 260 mm
Distance between columns: 560 mm
Motor: 7 kW
Length: 1225 mm
Width: 1865 mm
Height: 3060 mm
Weight: 7000 kg
Tonnage rating point: 4 mm
Table length: 920 mm
Table width: 500 mm
Hole in table: 180 mm
Stroke: 12 - 120 mm
Strokes: 50 - 80 1/min
Ram guides: 8
Ram adjustment: 80 mm
Throat depth: 260 mm
Distance between columns: 560 mm
Motor: 7 kW
Length: 1225 mm
Width: 1865 mm
Height: 3060 mm
Weight: 7000 kg
4
Metal working and machine toolsPressesEccentric presses
pressing capacity: 160 to
Table length: 1100 mm
Table width: 700 mm
Hole in table: 210 mm
Stroke: 15 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram adjustment: 95 mm
Throat depth: 325 mm
Length: 2400 mm
Width: 1430 mm
Height: 3200 mm
Weight: 9950 kg
pressing capacity: 160 to
Table length: 1100 mm
Table width: 700 mm
Hole in table: 210 mm
Stroke: 15 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram adjustment: 95 mm
Throat depth: 325 mm
Length: 2400 mm
Width: 1430 mm
Height: 3200 mm
Weight: 9950 kg
Table length: 1100 mm
Table width: 700 mm
Hole in table: 210 mm
Stroke: 15 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram adjustment: 95 mm
Throat depth: 325 mm
Length: 2400 mm
Width: 1430 mm
Height: 3200 mm
Weight: 9950 kg
1
Metal working and machine toolsPressesEccentric presses
pressing capacity: 80 to
Table length: 900 mm
Table width: 540 mm
Hole in table: 180 mm
Stroke: 4 - 102 mm
Strokes: 54 1/min
Ram: 490x325 mm
Throat depth: 280 mm
Daylight: 380 mm
Motor: 7.5 kW
Length: 2010 mm
Width: 1390 mm
Height: 2750 mm
Weight: 5400 kg
pressing capacity: 80 to
Table length: 900 mm
Table width: 540 mm
Hole in table: 180 mm
Stroke: 4 - 102 mm
Strokes: 54 1/min
Ram: 490x325 mm
Throat depth: 280 mm
Daylight: 380 mm
Motor: 7.5 kW
Length: 2010 mm
Width: 1390 mm
Height: 2750 mm
Weight: 5400 kg
Table length: 900 mm
Table width: 540 mm
Hole in table: 180 mm
Stroke: 4 - 102 mm
Strokes: 54 1/min
Ram: 490x325 mm
Throat depth: 280 mm
Daylight: 380 mm
Motor: 7.5 kW
Length: 2010 mm
Width: 1390 mm
Height: 2750 mm
Weight: 5400 kg
1
Metal working and machine toolsPressesEccentric presses
pressing capacity: 63 to
Table length: 750 mm
Table width: 500 mm
Hole in table: 170 mm
Stroke: 4 - 102 mm
Strokes: 54 1/min
Ram: 490x325 mm
Ram adjustment: 90 mm
Throat depth: 270 mm
Distance between columns: 440 mm
Motor: 7 kW
Length: 1800 mm
Width: 1150 mm
Height: 2750 mm
Weight: 4100 kg
pressing capacity: 63 to
Table length: 750 mm
Table width: 500 mm
Hole in table: 170 mm
Stroke: 4 - 102 mm
Strokes: 54 1/min
Ram: 490x325 mm
Ram adjustment: 90 mm
Throat depth: 270 mm
Distance between columns: 440 mm
Motor: 7 kW
Length: 1800 mm
Width: 1150 mm
Height: 2750 mm
Weight: 4100 kg
Table length: 750 mm
Table width: 500 mm
Hole in table: 170 mm
Stroke: 4 - 102 mm
Strokes: 54 1/min
Ram: 490x325 mm
Ram adjustment: 90 mm
Throat depth: 270 mm
Distance between columns: 440 mm
Motor: 7 kW
Length: 1800 mm
Width: 1150 mm
Height: 2750 mm
Weight: 4100 kg
2
Metal working and machine toolsPressesEccentric presses
pressing capacity: 60 to
Tonnage rating point: 3.5 mm
Table length: 500 mm
Table width: 700 mm
Hole in table: 190 mm
Stroke: 1 - 100 mm
Strokes: 65 1/min
Ram guides: 4
Ram adjustment: 70 mm
Ram hole: 45 mm
Throat depth: 260 mm
Daylight: 365 mm
Motor: 5.5 kW
Length: 1250 mm
Width: 1350 mm
Height: 2400 mm
Weight: 3500 kg
pressing capacity: 60 to
Tonnage rating point: 3.5 mm
Table length: 500 mm
Table width: 700 mm
Hole in table: 190 mm
Stroke: 1 - 100 mm
Strokes: 65 1/min
Ram guides: 4
Ram adjustment: 70 mm
Ram hole: 45 mm
Throat depth: 260 mm
Daylight: 365 mm
Motor: 5.5 kW
Length: 1250 mm
Width: 1350 mm
Height: 2400 mm
Weight: 3500 kg
Tonnage rating point: 3.5 mm
Table length: 500 mm
Table width: 700 mm
Hole in table: 190 mm
Stroke: 1 - 100 mm
Strokes: 65 1/min
Ram guides: 4
Ram adjustment: 70 mm
Ram hole: 45 mm
Throat depth: 260 mm
Daylight: 365 mm
Motor: 5.5 kW
Length: 1250 mm
Width: 1350 mm
Height: 2400 mm
Weight: 3500 kg
1
Metal working and machine toolsPressesEccentric presses
pressing capacity: 40 to
Tonnage rating point: 2.5 mm
Table length: 450 mm
Table width: 650 mm
Hole in table: 150 mm
Stroke: 1 - 80 mm
Strokes: 125 1/min
Ram guides: 4
Ram adjustment: 75 mm
Ram hole: 40 mm
Throat depth: 225 mm
Daylight: 300 mm
Motor: 4 kW
Length: 1350 mm
Width: 1370 mm
Height: 2160 mm
Weight: 2100 kg
pressing capacity: 40 to
Tonnage rating point: 2.5 mm
Table length: 450 mm
Table width: 650 mm
Hole in table: 150 mm
Stroke: 1 - 80 mm
Strokes: 125 1/min
Ram guides: 4
Ram adjustment: 75 mm
Ram hole: 40 mm
Throat depth: 225 mm
Daylight: 300 mm
Motor: 4 kW
Length: 1350 mm
Width: 1370 mm
Height: 2160 mm
Weight: 2100 kg
Tonnage rating point: 2.5 mm
Table length: 450 mm
Table width: 650 mm
Hole in table: 150 mm
Stroke: 1 - 80 mm
Strokes: 125 1/min
Ram guides: 4
Ram adjustment: 75 mm
Ram hole: 40 mm
Throat depth: 225 mm
Daylight: 300 mm
Motor: 4 kW
Length: 1350 mm
Width: 1370 mm
Height: 2160 mm
Weight: 2100 kg
5
Metal working and machine toolsPressesEccentric presses
pressing capacity: 20 to
Tonnage rating point: 1.7 mm
Table length: 360 mm
Table width: 550 mm
Hole in table: 140 mm
Stroke: 1 - 50 mm
Strokes: 160 1/min
Ram guides: 4
Ram adjustment: 40 mm
Ram hole: 35 mm
Throat depth: 200 mm
Daylight: 240 mm
Motor: 2.2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1860 mm
Weight: 1250 kg
pressing capacity: 20 to
Tonnage rating point: 1.7 mm
Table length: 360 mm
Table width: 550 mm
Hole in table: 140 mm
Stroke: 1 - 50 mm
Strokes: 160 1/min
Ram guides: 4
Ram adjustment: 40 mm
Ram hole: 35 mm
Throat depth: 200 mm
Daylight: 240 mm
Motor: 2.2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1860 mm
Weight: 1250 kg
Tonnage rating point: 1.7 mm
Table length: 360 mm
Table width: 550 mm
Hole in table: 140 mm
Stroke: 1 - 50 mm
Strokes: 160 1/min
Ram guides: 4
Ram adjustment: 40 mm
Ram hole: 35 mm
Throat depth: 200 mm
Daylight: 240 mm
Motor: 2.2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1860 mm
Weight: 1250 kg
1
Metal working and machine toolsSheet metal working machinesNibbling machines
Punching power: 30 ton
Working area: 2500x1250 mm
X-axis movement (+repositioning): 2500 mm
Y-axis movement: 1250 mm
speed of X-axis: 116 m/Min
speed of Y-axis: 80 m/min
speed combined X+Y: 140 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 425 1/min
Max. strokes at marking: 3200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 120 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 15 kW
Height: 2310 mm
Width without light barrier: 5360 mm
Width with light barrier: 7360 mm
Length without light barrier: 5750 mm
Length with light barrier: 6800 mm
Weight: 12960 kg
Punching power: 30 ton
Working area: 2500x1250 mm
X-axis movement (+repositioning): 2500 mm
Y-axis movement: 1250 mm
speed of X-axis: 116 m/Min
speed of Y-axis: 80 m/min
speed combined X+Y: 140 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 425 1/min
Max. strokes at marking: 3200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 120 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 15 kW
Height: 2310 mm
Width without light barrier: 5360 mm
Width with light barrier: 7360 mm
Length without light barrier: 5750 mm
Length with light barrier: 6800 mm
Weight: 12960 kg
Working area: 2500x1250 mm
X-axis movement (+repositioning): 2500 mm
Y-axis movement: 1250 mm
speed of X-axis: 116 m/Min
speed of Y-axis: 80 m/min
speed combined X+Y: 140 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 425 1/min
Max. strokes at marking: 3200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 120 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 15 kW
Height: 2310 mm
Width without light barrier: 5360 mm
Width with light barrier: 7360 mm
Length without light barrier: 5750 mm
Length with light barrier: 6800 mm
Weight: 12960 kg
1
Metal working and machine toolsSheet metal working machinesNibbling machines
Punching power: 20 ton
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Height: 2310 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Weight: 11000 kg
Punching power: 20 ton
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Height: 2310 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Weight: 11000 kg
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Height: 2310 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Weight: 11000 kg
2
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 1020 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. bending angle: 135 °
Length: 1348 mm
Width: 850 mm
Height: 1175 mm
Weight: 285 kg
Bending length: 1020 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. bending angle: 135 °
Length: 1348 mm
Width: 850 mm
Height: 1175 mm
Weight: 285 kg
Sheet thickness (420 N/mm²): 1.5 mm
Max. bending angle: 135 °
Length: 1348 mm
Width: 850 mm
Height: 1175 mm
Weight: 285 kg
1
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 2540 mm
Sheet thickness (420 N/mm²): 3.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Motor: 3 kW
Length: 3850 mm
Width: 1700 mm
Height: 1860 mm
Weight: 3700 kg
Bending length: 2540 mm
Sheet thickness (420 N/mm²): 3.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Motor: 3 kW
Length: 3850 mm
Width: 1700 mm
Height: 1860 mm
Weight: 3700 kg
Sheet thickness (420 N/mm²): 3.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Motor: 3 kW
Length: 3850 mm
Width: 1700 mm
Height: 1860 mm
Weight: 3700 kg
6
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 30 to
Bending length: 1250 mm
Axes: X and Y axis
Stroke: 150 mm
Inside distance between side frames: 1010 mm
Gap in side frame: 255 mm
Daylight: 265 mm
Power concept: hydraulic
rapid speed Y-axis: 210 mm/s
Working speed Y-axis: 10
Motor power: 3 kW
Length: 1760 mm
Width: 1375 mm
Height: 2135 mm
Weight: 1700 kg
pressing capacity: 30 to
Bending length: 1250 mm
Axes: X and Y axis
Stroke: 150 mm
Inside distance between side frames: 1010 mm
Gap in side frame: 255 mm
Daylight: 265 mm
Power concept: hydraulic
rapid speed Y-axis: 210 mm/s
Working speed Y-axis: 10
Motor power: 3 kW
Length: 1760 mm
Width: 1375 mm
Height: 2135 mm
Weight: 1700 kg
Bending length: 1250 mm
Axes: X and Y axis
Stroke: 150 mm
Inside distance between side frames: 1010 mm
Gap in side frame: 255 mm
Daylight: 265 mm
Power concept: hydraulic
rapid speed Y-axis: 210 mm/s
Working speed Y-axis: 10
Motor power: 3 kW
Length: 1760 mm
Width: 1375 mm
Height: 2135 mm
Weight: 1700 kg
5
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 120 to
Bending length: 3050 mm
Axes: Y1 / Y2 and X-axis
Stroke: 180 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 375 mm
Power concept: hydraulic
rapid speed Y-axis: 120 mm/s
Working speed Y-axis: 9
Retractionspeed Y-axis: 77
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 878 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 11 kW
Length: 3750 mm
Width: 1230 mm
Height: 2400 mm
Weight: 5900 kg
pressing capacity: 120 to
Bending length: 3050 mm
Axes: Y1 / Y2 and X-axis
Stroke: 180 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 375 mm
Power concept: hydraulic
rapid speed Y-axis: 120 mm/s
Working speed Y-axis: 9
Retractionspeed Y-axis: 77
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 878 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 11 kW
Length: 3750 mm
Width: 1230 mm
Height: 2400 mm
Weight: 5900 kg
Bending length: 3050 mm
Axes: Y1 / Y2 and X-axis
Stroke: 180 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 375 mm
Power concept: hydraulic
rapid speed Y-axis: 120 mm/s
Working speed Y-axis: 9
Retractionspeed Y-axis: 77
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 878 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 11 kW
Length: 3750 mm
Width: 1230 mm
Height: 2400 mm
Weight: 5900 kg
3
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 220 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2 x 11 kW
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
pressing capacity: 220 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2 x 11 kW
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2 x 11 kW
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
3
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 220 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 11 kW
Length: 4250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 12250 kg
pressing capacity: 220 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 11 kW
Length: 4250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 12250 kg
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 11 kW
Length: 4250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 12250 kg
3
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 135 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2x4 kW
Length: 4200 mm
Width: 1680 mm
Height: 2750 mm
Weight: 9500 kg
pressing capacity: 135 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2x4 kW
Length: 4200 mm
Width: 1680 mm
Height: 2750 mm
Weight: 9500 kg
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2x4 kW
Length: 4200 mm
Width: 1680 mm
Height: 2750 mm
Weight: 9500 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 320 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 37 kW
Length: 4300 mm
Width: 1820 mm
Height: 3330 mm
Weight: 17100 kg
pressing capacity: 320 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 37 kW
Length: 4300 mm
Width: 1820 mm
Height: 3330 mm
Weight: 17100 kg
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 37 kW
Length: 4300 mm
Width: 1820 mm
Height: 3330 mm
Weight: 17100 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 220 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 22 kW
Length: 5250 mm
Width: 1770 mm
Height: 3000 mm
Weight: 14750 kg
pressing capacity: 220 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 22 kW
Length: 5250 mm
Width: 1770 mm
Height: 3000 mm
Weight: 14750 kg
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 22 kW
Length: 5250 mm
Width: 1770 mm
Height: 3000 mm
Weight: 14750 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 220 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 140 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 22 kW
Length: 4250 mm
Width: 1770 mm
Height: 3000 mm
Weight: 12600 kg
pressing capacity: 220 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 140 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 22 kW
Length: 4250 mm
Width: 1770 mm
Height: 3000 mm
Weight: 12600 kg
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 140 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 22 kW
Length: 4250 mm
Width: 1770 mm
Height: 3000 mm
Weight: 12600 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 175 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 12780 kg
pressing capacity: 175 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 12780 kg
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 12780 kg
3
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2100 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2100 kg
Sheet thickness (420 N/mm²): 2.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2100 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 135 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge travel X-axis: 500 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 4250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 9580 kg
pressing capacity: 135 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge travel X-axis: 500 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 4250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 9580 kg
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge travel X-axis: 500 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 4250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 9580 kg
5
Metal working and machine toolsSheet metal working machinesSwivel bending machines
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
4
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 100 to
Bending length: 2550 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2200 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 11 kW
Length: 3800 mm
Width: 1670 mm
Height: 2850 mm
Weight: 7800 kg
pressing capacity: 100 to
Bending length: 2550 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2200 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 11 kW
Length: 3800 mm
Width: 1670 mm
Height: 2850 mm
Weight: 7800 kg
Bending length: 2550 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2200 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 11 kW
Length: 3800 mm
Width: 1670 mm
Height: 2850 mm
Weight: 7800 kg
7
Metal working and machine toolsSheet metal working machinesSlitting and cut-to-length lines
Max. sheet width: 1250 mm
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Number of blade pairs: 2 Stk.
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
Max. sheet width: 1250 mm
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Number of blade pairs: 2 Stk.
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
Max. thickness - mild steel: 1.25 mm
Max. thickness / pair of blades (mildsteel): 1,25 mm bei 1 Messerpaar, 1 mm bei 2 Messerpaaren, 0,8 mm bei 3 Messerpaaren
Number of blade pairs: 2 Stk.
Motor: 0.37 kW
Speed: 36 m/min
Shaft diameter: 70
Length: 1900 mm
Width: 1600 mm
Height: 1000 mm
Weight: 350 kg
2
Metal working and machine toolsSheet metal working machinesBending machines
Bending length: 350 - 2250 mm
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
Bending length: 350 - 2250 mm
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
11
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18142
Hersteller: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
Ref. no.: 18142
Hersteller: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
Hersteller: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
11
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18140
Hersteller: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
Ref. no.: 18140
Hersteller: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
Hersteller: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18138
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
Ref. no.: 18138
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
13
Plastic processing machinesInjection molding machinesMulti-component injection molding machines
Ref. no.: 18092
Hersteller: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
Ref. no.: 18092
Hersteller: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
Hersteller: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 17514
Hersteller: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
Ref. no.: 17514
Hersteller: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
Hersteller: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
1
Metal working and machine toolsSanding machinesAccessories and spare parts
Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function
Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function
9
Metal working and machine toolsAccessories and spare partsOther
Deposit: 1000,00 EUR
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
Deposit: 1000,00 EUR
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
14
Metal working and machine toolsLathesTurret lathes
Turning diameter: 340 mm
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: good
Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest
Turning diameter: 340 mm
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: good
Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: good
Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest
12
Metal working and machine toolsDrilling machines and boring millsTapping machines
Table size: 260 x 290 mm
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
Table size: 260 x 290 mm
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
Taper fixture: drill chuck
Coolant system: yes
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
4
Packaging machineryPacking machines
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
4
Metal working and machine toolsSawing
Cutting speed: 6 - 30 m/min
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good
fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation
Accessory: 2 saw blades
Cutting speed: 6 - 30 m/min
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good
fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation
Accessory: 2 saw blades
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good
fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation
Accessory: 2 saw blades
14
Metal working and machine toolsLathesCNC lathes
Swing diameter over bed: 490 mm
Length between centres: 1000 mm
Swing diameter over cross slide: 280 mm
Speed range: 1 - 625 / 1 - 3.000 rpm
Gearbox stages: ZF - 2
Spindle bore: 93 mm
Diameter of spindle bearing: Größe 8 - 130 mm
Tailstock taper: MK5 - Hub 160 mm
Control: Siemens Manualturn
Total power: 17 kW
Weight of machine: 3.600 kg
Space requirement (W x D x H): 3,0 x 1,8 x 2,0 m
Working hour: 31556 h
without jaw chuck, contour calculation option and contour handwheel, Multifix mount, spindle head according to DIN 55027
Accessory: Documentation, suction, no other accessories
Swing diameter over bed: 490 mm
Length between centres: 1000 mm
Swing diameter over cross slide: 280 mm
Speed range: 1 - 625 / 1 - 3.000 rpm
Gearbox stages: ZF - 2
Spindle bore: 93 mm
Diameter of spindle bearing: Größe 8 - 130 mm
Tailstock taper: MK5 - Hub 160 mm
Control: Siemens Manualturn
Total power: 17 kW
Weight of machine: 3.600 kg
Space requirement (W x D x H): 3,0 x 1,8 x 2,0 m
Working hour: 31556 h
without jaw chuck, contour calculation option and contour handwheel, Multifix mount, spindle head according to DIN 55027
Accessory: Documentation, suction, no other accessories
Length between centres: 1000 mm
Swing diameter over cross slide: 280 mm
Speed range: 1 - 625 / 1 - 3.000 rpm
Gearbox stages: ZF - 2
Spindle bore: 93 mm
Diameter of spindle bearing: Größe 8 - 130 mm
Tailstock taper: MK5 - Hub 160 mm
Control: Siemens Manualturn
Total power: 17 kW
Weight of machine: 3.600 kg
Space requirement (W x D x H): 3,0 x 1,8 x 2,0 m
Working hour: 31556 h
without jaw chuck, contour calculation option and contour handwheel, Multifix mount, spindle head according to DIN 55027
Accessory: Documentation, suction, no other accessories
14
Woodworking machineryWindow manufacturing machinesComplete production lines
Power: 1.250 / 1.000
Generator type: AVK DSG74M 1-4
Motor type: ERGE
Speed: 1.500 rpm
Voltage: 50 Hz - 400 V
Container (W x D x H): 12,2 x 3,0 x 4,5
Working hour: 128 h
Weight of machine: 11.380 kg
Condition: very good
Not operational, cooling water is leaking from the fuel system (defective immersion sleeve).
Power: 1.250 / 1.000
Generator type: AVK DSG74M 1-4
Motor type: ERGE
Speed: 1.500 rpm
Voltage: 50 Hz - 400 V
Container (W x D x H): 12,2 x 3,0 x 4,5
Working hour: 128 h
Weight of machine: 11.380 kg
Condition: very good
Not operational, cooling water is leaking from the fuel system (defective immersion sleeve).
Generator type: AVK DSG74M 1-4
Motor type: ERGE
Speed: 1.500 rpm
Voltage: 50 Hz - 400 V
Container (W x D x H): 12,2 x 3,0 x 4,5
Working hour: 128 h
Weight of machine: 11.380 kg
Condition: very good
Not operational, cooling water is leaking from the fuel system (defective immersion sleeve).
6
Packaging machineryPacking machines
Total power: 1,4 kW
Weight of machine: 210 kg
Space requirement (W x D x H): 1,2 x 1,2 x 2,05 m
for cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 bar
Accessory: without extraction function
Total power: 1,4 kW
Weight of machine: 210 kg
Space requirement (W x D x H): 1,2 x 1,2 x 2,05 m
for cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 bar
Accessory: without extraction function
Weight of machine: 210 kg
Space requirement (W x D x H): 1,2 x 1,2 x 2,05 m
for cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 bar
Accessory: without extraction function