Weight of machine: 12 kg

Roller block, height 980 mm, adjustable, roller width 500 mm

Weight of machine: 7 kg

Height adjustable, 3 pieces available, height 0.94 m

Weight of machine: 10 kg

Sectional area 90° flat: links 130 x 100
Sectional area 45° flat: 200 x 160 mm
Square-section area 90°: 240 mm
Square-section area 45°: links 190 - rechts 160 mm
Square-section area 60°: links 110
Sectional area 90° circular: 255 mm
Sectional area 45° circular: links 210 - rechts 180 mm
Sectional area 60° circular: 135
Cutting speed: 37 x 74 oder 18 - 110 m/min
Saw blade dimensions: 2760 x 27 x 0,9 mm
Space requirement (W x D x H): 1,7 x 1,3 x 1,9 m
Total power: 2,5 kW
Weight of machine: 600 kg
Condition: sehr gut

well-maintained miter saw, little used, top condition

Accessory: Documentation, 4 m roller conveyor left, 3 m roller conveyor right with manual stop, 4 saw blades, various tools

Grinding length: 1500 mm
Grinding width: 600 mm
Grinding hight: 400 mm
Table load: 950 kg
Table size: 1900 x 550 mm
Magnetic table: 1500 x 600 mm
Grinding wheel dimensions: 400 x 100 x 127 mm
Spindle speed: 1000 - 3450 rpm
Spindle drive: 10 - 34 kW
Weight of machine: 6.700 kg

Travel distances 1575 x 560, overhauled by Wema Service in 2012

Accessory: balancing device, 4 grinding wheels, 2 holders

Grinding length: 600 mm
Grinding width: 375 mm
Magnetic table: 600 x 350 mm
Workpiece hight: 375 mm
Weight of machine: 3000 kg

little used, from a workshop for the disabled, travel distances 750 x 350

Accessory: balancing device, 1 grinding wheel, 2 holders

Weight of machine: 18 kg
Space requirement (W x D x H): 0,67 x 0,9 x 0,28 m

was installed in a Schlichter, Profi Packer SCV 5844 Pro Servo, 90° angle 480 x 620 mm

Operating pressure: max. 12.000 bar
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m

The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.

Swing diameter over cross slide: 480 mm
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good

Main drive motor and gearbox overhauled, spindle with new bearings, ball screws X, Z new, scraper sliding plates new, oil mist extraction, chuck Röhm FD-HS 400-3 - ID 414896, hollow clamping cylinder SMW Autoblok type ZHDC-SN125/93, two gear stages

Accessory: towable steady rest max. clamping diameter 245 mm, towable tailstock, 4 driven tools (axial and radial),1 set of jaws

X: 160 mm
Z: 340 mm
Max. tool weight: 20
Tool holder: SK 50
Air pressure: 6
Total power: 0,2 kW
Weight of machine: 160 kg
Space requirement (W x D x H): 0,8 x 1,2 x 1,0 m
Condition: very good

4-6 bar, with PC, monitor and label printer, software: Multivision MVIS II

Accessory: Documentation, label printer

Grinding length: 400 mm
Grinding width: 200 mm
Table size: 450 x 200 mm
Table speed: 1 - 25
Magnetic table: 450 x 200 mm
Grinding wheel dimensions: 250 x 25 mm
Spindle speed: 1.300 / 2.600 rpm
Coolant system: ja
Total power: 4,5 kW
Weight of machine: 1900 kg
Space requirement (W x D x H): 1,9 x 1,5 x 2,45 m
Condition: einsatzbereit

no automatic delivery

Accessory: Documentation, circuit diagram

X: 760 mm
Y: 530 mm
Z: 560 mm
Table size: 1200 x 500 mm
Speed range: 12.000 rpm
Taper fixture: SK 40
Internal coolant: 20 bar
Tool changer: 30 -station
Electrical hand wheel: yes
Chip conveyor: yes
Control: Siemens 828 D
Exhaust unit: yes
Working hour: 17.500 h
Total power: 25 kW
Weight of machine: 8000 kg
Space requirement (W x D x H): 2,4 × 2,0 × 2,8 m
Condition: good, few operating hours

4th axis, swivel table

Accessory: documentation, no further accessories

Cutting diameter: 175 mm
Saw blade dimensions: bore 30, min. 450, max. 550 mm
Speed range: 2800 rpm
Working height: 820 mm
Suction stub: 1 x 120 - 1 x 150
Total power: 5,5 kW
Weight of machine: 400 kg
Space requirement (W x D x H): 1,4 x 1,0 x 1,8 m
Condition: very good

Roller conveyor left 2 m, roller conveyor with automatic stop right 4.5 m (4m section length),was rarely used, from a workshop for the disabled

Accessory: documentation

Internal grinding diameter min.: 1 mm
Internal grinding diameter max: 50 mm
Grinding length: 200 mm
Centre height: 132 mm
Tool spindle speed: 150 - 1.500 rpm
Table speed: continuous adjustment up to 10
Dressing device: yes
Spindle speed: 16.500 - 120.000 rpm
Internal grinding spindle: 16.500, 22.000, 33.000 rpm
Paper belt filter: yes
Total power: 3 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 1,8 x 1,1 x 1,8 m
Condition: good

Well-maintained machine from a German automobile manufacturer

Accessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures

Dimensions of the bars: Ø 35 mm - 2.200
Set: 2 x 5
Space requirement (W x D x H): in box 1,45 x 2,38 x 0,38 m

Swing diameter over bed: 430 mm
Workpiece weight: max. 30 kg
Swing diameter over cross slide: 210 mm
Length between centres: 700 mm
Turning length: max. 510 mm
Speed range: 6.300 rpm
Collet chuck: for 173 E collets
Spindle bore: 45 mm
Jaw chuck Ø max.: 160
Turret: 12 -station
Driven tools: no
Tailstock: yes
Control: Siemens 810 D
Chip conveyor: no
Total power: 17 kW
Weight of machine: 2.600 kg
Space requirement (W x D x H): 2,7 x 2,0 x 2,0 m
Condition: very good
Hours of operation: 24.602 h

Well-maintained machine, rarely used, from a workshop for the disabled, the arm in the parts catcher machine has been removed. This was sent to us via DHL and got lost. Search request with DHL is still ongoing

Accessory: Documentation

Diameter: 200 mm
Weight of machine: 20 kg

hight 105 mm, mounting via 4 x M12, hole distance 95 mm, outlet 55 mm

Working height: 820 mm
Weight of machine: 890 kg
Space requirement (W x D x H): 2,0 x 1,0 x 0,82 m
Condition: the plate is top

nice solid surface plate, welding table

Troath: 500 mm
Table size: 700 x 700 mm
Workpiece hight: 300 mm
Tape speed: 19 - 2.900 m/min m/min.
Total power: 1,1 kW
Weight of machine: 920 kg
Space requirement (W x D x H): 1,2 x 1,0 x 2,2 m

Table can be swiveled in all directions, 3 gear levels/speeds - in the individual levels, controllable speed setting

Accessory: Work light, belt welding device

Pressure: 50 t
Working length: 2550 mm
Distance between columns: 2050 mm
Bending power: bei 1 m - bis 10 mm
Space requirement (W x D x H): 2,9 x 1,6 x 2,3 m
Weight of machine: 4200 kg
Total power: 4,5 kW
Condition: very good

hardly used, very good condition, all cylinders are tight, press control type PSSAS

Accessory: Various bending tools, documentation, stand for tools

Processing diameter: 320 mm
Coolant system: yes
Mitre cut: 45 -/+ degree
Saw blade dimensions: 4860 x 34 x 1,1 mm
Stop: with ruler 450 mm
Total power: 2,8 kW
Weight of machine: 1500 kg
Space requirement (W x D x H): 2,95 x 1,6 x 1,8 m
Condition: good

on wheels, column-guided, good condition, ready to use

Accessory: 4 band saw blades

Planing length: 375
Planing width: 500 mm
Lifting speed: 19 - 190
Distance between table und ram: 390
Table size: 350 x 315 mm
Total power: 1,8 / 2,2 kW
Weight of machine: 1100 kg
Space requirement (W x D x H): 1,25 x 1,5 x 1,5 m
Condition: good

Swing diameter over cross slide: 190 mm
Length between centres: 800 mm
X: 180 mm
Z: 800 mm
Speed range: 3.500 rpm
Spindle bore: 43 mm
Tailstock: yes
Quill mounting cone: MK3
Quill ram: 75 mm
Quill diameter: 50 mm
Multifix: B - 4 quadruple
Coolant system: yes
Chucks: Röhm Ø 160 mm 3 jaws
Control: Heidenhain MANUALplus
Total power: 11 kW
Weight of machine: 1200 kg
Space requirement (W x D x H): 2,3 x 1,205 x 1,5 m
Condition: good

Handwheels for X and Z, spindle and axes run smoothly, guides look good

Accessory: Documentation, 16 pcs. Multifix B tool holder, machine feet

X: 750 mm
Y: 500 mm
Z: 500 mm
Table size: 490 x 950 mm
Speed range: 9.000 rpm
Taper fixture: SK 40
Internal coolant supply: yes
Tool changer: 20 -station
Control: Heidenhain 426 / 430 CB
Control on: 36299 h
Program run: 16867 h
Total power: 25 kW
Condition: good, ready for immediate use
Weight of machine: 4000 kg
Space requirement (W x D x H): 2,7 x 2,2 x 2,4 m

Coolant pan, no chip conveyor

Accessory: Documentation, 9 SK40 recordings

X: 560 mm
Y: 320 mm
Z: 400 mm
Mounting table: 450 x 950 mm
Quill ram: 100 mm
Speed range: 25 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 3 kW
Total power: 3,5 kW
Weight of machine: 1.800 kg
Space requirement (W x D x H): 1,5 x 1,8 x 1,8 m

automatic feed in all axes, beautiful machine in good condition, ready for immediate use

Accessory: Vice, counterholder, various holders, various collets, documentation

Air pressure: 6 bar
Transport speed: 3 - 30 mtr/min
Welding frame dimension: 580 x 440 mm
Film core diameter: 76 mm
Max. film roll diameter: 300 mm
Max. product hight: 180 mm
Film thickness: 7 to 60 mµ
Max. film width: 550 mm
Cyclic output: 40 cycle/min
Total power: 3,7 kW
Weight of machine: 560 kg
Space requirement (W x D x H): 2.05 x 1.72 x 1.48 m
Condition: good

Fully automatic angle welding machine, permanently heated welding knife, DELTA color touchscreen, horizontal and vertical photocells, film material polyolefin fine shrink films, PVC, PLA and other organic films, with labeler / barcode printer SATO M8485Se

Accessory: no other accessories, documentation

Trunk length: 3
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m

Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.

Accessory: options: more trunk supports

Suction nozzle diameter: 160 mm
Volume flow: 1780 m³/h
Filter surface: 11,5 sqmtr.
Total power: 2,2 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 1,3 x 0,86 x 1,96 m
Condition: very good

for continuous operation, for vacuuming dry wood dust and wood chips

Accessory: Documentation, 4 used collection bags

Turning diameter: 284 mm
Turning length: 406 mm
X: 218 mm
Z: 406 mm
Speed range: 6.000 rpm
Spindle bore: 45 mm
Turret: 12 -station
Driven tools: yes
Tool holder: VDI 30
Control: Siemens 810 D
Electrical hand wheel: yes
Chip conveyor: yes
Total power: 25 kW
Weight of machine: 2.694 kg
Space requirement (W x D x H): 3,0 x 1,55 x 1,8 m

Spindle re-stored in 2024, Siemens options: Shopturn, peripheral connection, ShopTurn Work Step programming, transmit and shell surface transformation

Accessory: Documentation, no other accessories

Planing length: 375
Planing width: 500 mm
Lifting speed: 19 - 190
Distance between table und ram: 390
Table size: 350 x 315 mm
Total power: 1,8 / 2,2 kW
Weight of machine: 1100 kg
Space requirement (W x D x H): 1,25 x 1,5 x 1,5 m
Condition: good

good condition, runs very quietly

Accessory: various cranks

Air pressure: 6 bar
Transport speed: 3 - 30 mtr/min.
Welding frame dimension: 580 x 440 mm
Film core diameter: 76 mm
Max. film roll diameter: 300 mm
Max. product hight: 180 mm
Film thickness: 7 to 60 mµ
Max. film width: 550 mm
Cyclic output: 40 cycle/min
Total power: 3,7 kW
Weight of machine: 560 kg
Space requirement (W x D x H): 2,05 x 1,72 x 1,48 m
Condition: good

Fully automatic angle sealing machine with integrated shrink tunnel, permanently heated sealing knife, DELTA color touch screen, horizontal and vertical photocells, foil material polyolefin fine shrink foils, PVC, PLA and other organic foils

Accessory: no other accessories, documentation

X: 650 mm
Y: 500 mm
Z: 450 mm
Table size: 1.100 x 600 mm
Table load: 450 kg
Speed range: 6.500 rpm
Taper fixture: SK 40
Internal coolant supply: no
Tool changer: 38 -station
Control: Heidenhain 430
Spindle on: 6566 h
Program run: 6051 h
Machine on: 31121 h
Total power: 20 kW
Weight of machine: 5500 kg
Space requirement (W x D x H): 2,3 x 3,1 x 2,3 m
Condition: very good

well-maintained machine, ready for immediate use, the machine does not have a tool changer

Accessory: no further accessories, ducumentation

X: 300 mm
Y: 160 mm
Z: 340 mm
Speed range: 40 - 2000 rpm
Mounting table: 600 x 210 mm
Taper fixture: SK 40
Control: TNC 113 Digitalanzeige
Total power: 1,5 / 1,9 kW
Weight of machine: 1050 kg
Space requirement (W x D x H): 1,2 x 1,0 x 1,9 m
Condition: good

Rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head on spindle head movable 100 mm

Accessory: machine feet, documentation, counterholder, no other accessories

Table size: 560 x 520 mm
Working height: 920 mm
Total power: 1 kW
Weight of machine: 120 kg
Space requirement (W x D x H): 0,72 x 0,53 x 1,04 m

circular saw for wood/plastic, table/cabinet made of aluminum profiles, under table with door, stop/guide

X: 300 mm
Y: 150 mm
Z: 340 mm
Mounting table: 600 x 210 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40
Spindle drive: 1,7 kW
Digital display: 3-Achs DITRON Digital
Total power: 1,7 kW
Weight of machine: 830 kg
Space requirement (W x D x H): 1,2 x 0,9 x 1,7 m
Condition: good

good condition, ready for use

Accessory: Counterholder, dividing device

Total power: 1 kW
Weight of machine: 240 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,2 m

hand-held, for cutting sheet metal

Grinding width: 200 mm
Magnetic table: 500 x 200 mm
Dressing device: yes
Coolant system: yes
Automatic setting: no
Weight of machine: 1850 kg
Space requirement (W x D x H): 1,8 x 1,5 x 2,2 m m
Condition: good, ready for use


Accessory: without documentation, machine feet

Bar length: 3000
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 4,7 x 0,5 x 1,3 m

Guide tubes 10 and 25 mm, was attached to an EMCO lathe ET242

Accessory: Documentation

X: 420 mm
Y: 330 mm
Z: 400 mm
Table size: 850 x 325 mm
Speed range: 0 - 5000 rpm
Taper fixture: SK 40
Rapid: 12 m/min
Tool changer: 12 -station
Tool holder: 40 SK
Max. weight tool: 5 kg
Max. length tool: 220 mm
Tool diameter: 63 mm
Control: Sinumerik 810 M
Hours of operation: 40484 h
Total power: 15 kW
Weight of machine: 3200 kg
Space requirement (W x D x H): 2,4 x 2,3 x 2,45 m
Condition: good, ready for use

one tool station is currently defective, nice compact machine, can be used immediately

Accessory: HILMA SM 125 machine vice, various holders in the magazine, documentation, machine feet

Temperature range: in Helium 2275 ° C
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good

High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.

punch set

Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function

Deposit: 1000,00 EUR
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg

complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.

Working Area: 560 x 400 x 32 mm

Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100

Rotary table: 360 °
Rotary axis Ø: 400 mm
Space requirement (W x D x H): 0,7 x 0,6 x 0,2 m
Weight of machine: 240 kg
Condition: good

Weight of machine: 11 kg
Condition: very good

Size C, Location hole for Multifix on the support, diameter 23 mm

Granite plate: 750/ 500/ 20,5 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good

measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm

Turning diameter: 340 mm
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: good


Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest

Total power: 6,5 - 12 kW
Weight of machine: 160 kg
Space requirement (W x D x H): 0,9 x 0,8 x 1,1 m
Condition: good working condition

arm 350 mm, with cooling, welding time adjustable, U = 1,2 - 2,2, Fr. 50, input one phase 220 V, I = 29 A

Cutting diameter: 340 x 200 mm
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m

semi-automatic operation, robust machine, good condition, ready to use