Please wait...

5
Metal working and machine toolsSheet metal working machinesBending machines

Profile bending machine with manual feed of rolls HESSE by L

HESSE by LFSS PK 35
Shaft diameter: 50 Rolls diameter: 155 mm Driven rolls: 2 Motor power: 1.5 kW Speed: 4 m/min Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm Length: 1050 mm Width: 750 mm Height: 1450 mm Weight: 390 kg
Shaft diameter: 50
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
7
Printing machineryCutting machines

Wohlenberg 76 cut-tec papercutter

Wohlenberg 76 cut-tec
Wohlenberg 76 Paper Cutting Machine (1995) The Wohlenberg 76 paper cutting machine, built in 1995, is a reliable and accurate cutting solution for printing companies. With a cutting width of 76 cm and a maximum stacking height of 10 cm, this machine is ideal for processing various print formats. Equipped with hydraulic drive, a digital display, and extensive safety features, the Wohlenberg 76 offers both ease of use and safety. The machine weighs approximately 1500 kg, which contributes to its stability and precision.
Wohlenberg 76 Paper Cutting Machine (1995)

The Wohlenberg 76 paper cutting machine, built in 1995, is a reliable and accurate cutting solution for printing companies. With a cutting width of 76 cm and a maximum stacking height of 10 cm, this machine is ideal for processing various print formats. Equipped with hydraulic drive, a digital display, and extensive safety features, the Wohlenberg 76 offers both ease of use and safety. The machine weighs approximately 1500 kg, which contributes to its stability and precision.
1
Metal working and machine toolsSheet metal working machinesSection steel shears

Steelworker GEKA HYD 55 S

GEKA HYD 55 S
Punching power: 55 ton Throat depth: 250 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/10 mm Stroke: 20 mm Strokes: 37 1/min Flat steel: 300x15 mm Angle steel: 120x10 mm Round / square steel: 40 mm Notcher: 10 mm Motor: 5 kW Length: 1670 mm Width: 1160 mm Height: 2090 mm Weight: 1390 kg
Punching power: 55 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 mm
Angle steel: 120x10 mm
Round / square steel: 40 mm
Notcher: 10 mm
Motor: 5 kW
Length: 1670 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1390 kg
3
Metal working and machine toolsSheet metal working machinesSection steel shears

Hydraulic steelworker GEKA Bendicrop 60 S

GEKA Bendicrop 60 S
Punching power: 60 ton Throat depth: 250 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40 x 11 mm Strokes: 32 1/min Flat steel: 350 x 15 mm Angle steel: 120 x 10 mm Round / square steel: 45 / 40 mm Notcher: 10 mm Bending unit: max. 150x10 mm Motor: 5.5 kW Length: 1850 mm Width: 1300 mm Height: 2100 mm Weight: 1390 kg
Punching power: 60 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40 x 11 mm
Strokes: 32 1/min
Flat steel: 350 x 15 mm
Angle steel: 120 x 10 mm
Round / square steel: 45 / 40 mm
Notcher: 10 mm
Bending unit: max. 150x10 mm
Motor: 5.5 kW
Length: 1850 mm
Width: 1300 mm
Height: 2100 mm
Weight: 1390 kg
3
Metal working and machine toolsSheet metal working machinesSection steel shears

Steelworker GEKA Bendicrop 50

GEKA Bendicrop 50
Punching power: 50 ton Throat depth: 177 mm Number of stations: 5 Cylinder: 1 Max. diameter at sheet thickness (mild steel): 31 x 12 mm Strokes: 34 1/min Flat steel: 350 x 15 mm Angle steel: 80 x 8 mm Round / square steel: 35 / 30 mm Notcher: 10 mm Bending unit: 100 x 10 mm Motor: 3 kW Length: 1300 mm Width: 1100 mm Height: 1850 mm Weight: 950 kg
Punching power: 50 ton
Throat depth: 177 mm
Number of stations: 5
Cylinder: 1
Max. diameter at sheet thickness (mild steel): 31 x 12 mm
Strokes: 34 1/min
Flat steel: 350 x 15 mm
Angle steel: 80 x 8 mm
Round / square steel: 35 / 30 mm
Notcher: 10 mm
Bending unit: 100 x 10 mm
Motor: 3 kW
Length: 1300 mm
Width: 1100 mm
Height: 1850 mm
Weight: 950 kg
1
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Megabender MG

ERCOLINA Megabender MG 030 V2T
Flexion modulus: 15 cm³ Standard steel tube: 76 x 3 mm Gas tube: 2"1/2 x 4 mm Furniture tube: 76 x 3 mm FE35 (for hydraulic tubes): 70 x 5 mm Stainless steel AISI304-318: 70 x 4 mm Stainless steel AISI308 (food industry): 76 x 1,6 mm Brass soft: 76 x 4 mm Hard copper and aluminium: 76 x 6 mm Soft copper: 76 x 6 mm Conduit tube (TAZ): 73 x 4 mm Mepla, Gebereit and similar: 50 x 4 mm Roundbar solid (S275JO): 45 mm Squarebar solid (S275JO): 40 x 40 mm Flatsteel solid (S275JO): 10 x 90 mm Square profile (S275JO): 30 x 60 x 3 bzw. 60 x 60 x 3 mm T-profile (S275JO): 60 x 60 x 6 mm U-profile (S275JO): 50 x 20 x 6 mm Max. bending radius: 380 mm Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 2/4 r/min Motor: 3.5 kW Length: 370 mm Width: 680 mm Height: 910 mm Weight: 193 kg
Flexion modulus: 15 cm³
Standard steel tube: 76 x 3 mm
Gas tube: 2"1/2 x 4 mm
Furniture tube: 76 x 3 mm
FE35 (for hydraulic tubes): 70 x 5 mm
Stainless steel AISI304-318: 70 x 4 mm
Stainless steel AISI308 (food industry): 76 x 1,6 mm
Brass soft: 76 x 4 mm
Hard copper and aluminium: 76 x 6 mm
Soft copper: 76 x 6 mm
Conduit tube (TAZ): 73 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 45 mm
Squarebar solid (S275JO): 40 x 40 mm
Flatsteel solid (S275JO): 10 x 90 mm
Square profile (S275JO): 30 x 60 x 3 bzw. 60 x 60 x 3 mm
T-profile (S275JO): 60 x 60 x 6 mm
U-profile (S275JO): 50 x 20 x 6 mm
Max. bending radius: 380 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 2/4 r/min
Motor: 3.5 kW
Length: 370 mm
Width: 680 mm
Height: 910 mm
Weight: 193 kg
2
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Topbender TB 6

ERCOLINA Topbender TB 60 T
Flexion modulus: 10 cm³ Standard steel tube: 60 x 4 mm Gas tube: 2" x 4 mm Furniture tube: 60 x 4 mm FE35 (for hydraulic tubes): 64 x 5 mm Stainless steel AISI304-318: 64 x 3 mm Stainless steel AISI308 (food industry): 60 x 3 mm Brass soft: 60 x 6 mm Hard copper and aluminium: 64 x 6 mm Soft copper: 64 x 6 mm Conduit tube (TAZ): 63 x 4 mm Mepla, Gebereit and similar: 50 x 4 mm Roundbar solid (S275JO): 35 mm Squarebar solid (S275JO): 30 x 30 mm Flatsteel solid (S275JO): 14 x 60 mm Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm T-profile (S275JO): 50 x 50 x 6 mm U-profile (S275JO): 40 x 20 x 6 mm Max. bending radius: 380 mm Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 1,5 / 3 r/min Motor: 1.5 kW Length: 500 mm Width: 760 mm Height: 1000 mm Weight: 186 kg
Flexion modulus: 10 cm³
Standard steel tube: 60 x 4 mm
Gas tube: 2" x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 5 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 3 mm
Brass soft: 60 x 6 mm
Hard copper and aluminium: 64 x 6 mm
Soft copper: 64 x 6 mm
Conduit tube (TAZ): 63 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 14 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 380 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,5 / 3 r/min
Motor: 1.5 kW
Length: 500 mm
Width: 760 mm
Height: 1000 mm
Weight: 186 kg
1
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Superbender SB

ERCOLINA Superbender SB 48T
Flexion modulus: 6 cm³ Standard steel tube: 48 x 3,5 mm Gas tube: 1"1/2 x 3.68 mm Furniture tube: 54 x 1,5 mm FE35 (for hydraulic tubes): 50 x 4 mm Stainless steel AISI304-318: 50 x 3 mm Stainless steel AISI308 (food industry): 40 x 2,5 mm Brass soft: 60 x 3 mm Hard copper and aluminium: 64 x 2 mm Soft copper: 64 x 2 mm Conduit tube (TAZ): 60 x 2 mm Mepla, Gebereit and similar: 50 x 4 mm Roundbar solid (S275JO): 32 mm Squarebar solid (S275JO): 30 x 30 mm Flatsteel solid (S275JO): 8 x 48 mm Square profile (S275JO): 20 x 40 x 3 bzw. 40 x 40 x 3 mm T-profile (S275JO): 40 x 40 x 5 mm U-profile (S275JO): 32 x 16 x 5 mm Max. bending radius: 300 mm Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 4 r/min Motor: 1.5 kW Length: 570 mm Width: 410 mm Height: 1000 mm Weight: 110 kg
Flexion modulus: 6 cm³
Standard steel tube: 48 x 3,5 mm
Gas tube: 1"1/2 x 3.68 mm
Furniture tube: 54 x 1,5 mm
FE35 (for hydraulic tubes): 50 x 4 mm
Stainless steel AISI304-318: 50 x 3 mm
Stainless steel AISI308 (food industry): 40 x 2,5 mm
Brass soft: 60 x 3 mm
Hard copper and aluminium: 64 x 2 mm
Soft copper: 64 x 2 mm
Conduit tube (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 32 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 8 x 48 mm
Square profile (S275JO): 20 x 40 x 3 bzw. 40 x 40 x 3 mm
T-profile (S275JO): 40 x 40 x 5 mm
U-profile (S275JO): 32 x 16 x 5 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 4 r/min
Motor: 1.5 kW
Length: 570 mm
Width: 410 mm
Height: 1000 mm
Weight: 110 kg
1
Metal working and machine toolsSheet metal working machinesBending machines

Profile bending machine with hydraulic feed of rolls HESSE b

HESSE by DURMA PBH 80
Shaft diameter: 85 Rolls diameter: 247 mm Driven rolls: 3 Motor power: 7.5 kW Flat steel vertical position (section / min. diameter): 80x20 mm / 500 mm, 30x10 mm / 350 mm Flat steel horizontal position (section / min. diameter): 120x30 mm / 650 mm, 50x10 mm / 300 mm Square bar (section / min. diameter): 50x50 mm / 500 mm, 30x30 mm / 350 mm Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 20 mm / 350 mm Tube (section / min. diameter): Ø 100x2,5 mm / 1.300 mm, Ø 20x1 / 300 mm Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x4 mm Form tube square (section / min. diameter): 70x70x4 mm Angle leg outside (Querschnitt / min. Durchmesser): 80x8 mm / 1.200 mm, 30x3 mm / 450 mm Angle leg inside (section / min. diameter): 80x8 mm / 800 mm, 30x3 mm / 450 mm Length: 1580 mm Width: 1200 mm Height: 1410 mm Weight: 2350 kg
Shaft diameter: 85
Rolls diameter: 247 mm
Driven rolls: 3
Motor power: 7.5 kW
Flat steel vertical position (section / min. diameter): 80x20 mm / 500 mm, 30x10 mm / 350 mm
Flat steel horizontal position (section / min. diameter): 120x30 mm / 650 mm, 50x10 mm / 300 mm
Square bar (section / min. diameter): 50x50 mm / 500 mm, 30x30 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 20 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.300 mm, Ø 20x1 / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x4 mm
Form tube square (section / min. diameter): 70x70x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x8 mm / 1.200 mm, 30x3 mm / 450 mm
Angle leg inside (section / min. diameter): 80x8 mm / 800 mm, 30x3 mm / 450 mm
Length: 1580 mm
Width: 1200 mm
Height: 1410 mm
Weight: 2350 kg
1
Metal working and machine toolsSheet metal working machinesBending machines

Profile bending machine with hydraulic feed of rolls HESSE b

HESSE by SAHINLER HPK 120
Shaft diameter: 120 Rolls diameter: 390 mm Driven rolls: 3 Motor power: 15 kW Speed: 2/7,5 m/min Flat steel vertical position (section / min. diameter): 125x25 mm / 1.200 mm, 30x10 mm / 500 mm Flat steel horizontal position (section / min. diameter): 200x50 mm / 1.000 mm, 100x10 mm / 500 mm Square bar (section / min. diameter): 65x65 mm / 750 mm, 20x20 mm / 500 mm Round bar (section / min. diameter): Ø 80 mm / 850 mm, Ø 20 mm / 500 mm Tube (section / min. diameter): Ø 160x4 mm / 2.800 mm, Ø 140x3 mm / 1.500 mm, Ø 50x2 mm / 500 mm, Ø 5"x6,35 / 1.500 mm, Ø 3/4"x2,87 / 500 mm Form tube vertical position (Querschnitt / min. Durchmesser): 120x40x4 mm / 1.800 mm, 30x20x3 mm / 500 mm Form tube square (section / min. diameter): 90x90x5 mm / 1.800 mm, 30x30x3 mm / 500 mm Angle leg outside (Querschnitt / min. Durchmesser): 120x120x12 mm / 1.200 mm, 40x40x4 mm / 600 mm Angle leg inside (section / min. diameter): 100x100x10 mm / 1.200 mm, 40x40x4 mm / 600 mm UPN leg outside (section / min. diameter): UPN 220 / 1.000 mm, UPN 180 / 800 mm, UPN 40 / 500 mm UPN leg inside (section / min. diameter): UPN 220 / 1.200 mm, UPN 180 / 900 mm, UPN 40 / 600 mm IPN horizontal position (section / min. diameter): IPN 220 / 1.000 mm, IPN 80 / 500 mm Length: 2000 mm Width: 1650 mm Height: 1900 mm Weight: 4770 kg
Shaft diameter: 120
Rolls diameter: 390 mm
Driven rolls: 3
Motor power: 15 kW
Speed: 2/7,5 m/min
Flat steel vertical position (section / min. diameter): 125x25 mm / 1.200 mm, 30x10 mm / 500 mm
Flat steel horizontal position (section / min. diameter): 200x50 mm / 1.000 mm, 100x10 mm / 500 mm
Square bar (section / min. diameter): 65x65 mm / 750 mm, 20x20 mm / 500 mm
Round bar (section / min. diameter): Ø 80 mm / 850 mm, Ø 20 mm / 500 mm
Tube (section / min. diameter): Ø 160x4 mm / 2.800 mm, Ø 140x3 mm / 1.500 mm, Ø 50x2 mm / 500 mm, Ø 5"x6,35 / 1.500 mm, Ø 3/4"x2,87 / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 120x40x4 mm / 1.800 mm, 30x20x3 mm / 500 mm
Form tube square (section / min. diameter): 90x90x5 mm / 1.800 mm, 30x30x3 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 120x120x12 mm / 1.200 mm, 40x40x4 mm / 600 mm
Angle leg inside (section / min. diameter): 100x100x10 mm / 1.200 mm, 40x40x4 mm / 600 mm
UPN leg outside (section / min. diameter): UPN 220 / 1.000 mm, UPN 180 / 800 mm, UPN 40 / 500 mm
UPN leg inside (section / min. diameter): UPN 220 / 1.200 mm, UPN 180 / 900 mm, UPN 40 / 600 mm
IPN horizontal position (section / min. diameter): IPN 220 / 1.000 mm, IPN 80 / 500 mm
Length: 2000 mm
Width: 1650 mm
Height: 1900 mm
Weight: 4770 kg
1
Metal working and machine toolsSheet metal working machinesSection steel shears

Steelworker GEKA HYD 165 SD

GEKA HYD 165 SD
Punching power: 165 ton Throat depth: 610 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/30 bzw. 34/34 mm Stroke: 110 mm Strokes: 31 1/min Flat steel: 750x20 / 400x30 mm Angle steel: 205x205x18 mm Round / square steel: 60 mm Notcher: 16x58x110 mm Motor: 15 kW Length: 2950 mm Width: 1600 mm Height: 2200 mm Weight: 6300 kg
Punching power: 165 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/30 bzw. 34/34 mm
Stroke: 110 mm
Strokes: 31 1/min
Flat steel: 750x20 / 400x30 mm
Angle steel: 205x205x18 mm
Round / square steel: 60 mm
Notcher: 16x58x110 mm
Motor: 15 kW
Length: 2950 mm
Width: 1600 mm
Height: 2200 mm
Weight: 6300 kg
1
Metal working and machine toolsSheet metal working machinesBending machines

Profile bending machine with hydraulic feed of rolls HESSE b

HESSE by SAHINLER HPK 40
Shaft diameter: 35 Upper roll diameter: 137 mm Lower roll diameter: 137 mm Driven rolls: 3 Motor power: 1.1 kW Speed: 7 m/min Flat steel vertical position (section / min. diameter): 35x8 mm / 300 mm Flat steel horizontal position (section / min. diameter): 50x12 mm / 400 mm Square bar (section / min. diameter): 18x18 mm / 250 mm Round bar (section / min. diameter): Ø 22 mm / 200 mm Tube (section / min. diameter): Ø 40x1,5 mm / 500 mm Form tube vertical position (Querschnitt / min. Durchmesser): 30x15x2,5 mm / 500 mm Form tube square (section / min. diameter): 25x25x2 mm / 450 mm Angle leg outside (Querschnitt / min. Durchmesser): 35x35x5 mm / 400 mm Angle leg inside (section / min. diameter): 30x30x4 mm / 550 mm Length: 1050 mm Width: 500 mm Height: 1250 mm Weight: 350 kg
Shaft diameter: 35
Upper roll diameter: 137 mm
Lower roll diameter: 137 mm
Driven rolls: 3
Motor power: 1.1 kW
Speed: 7 m/min
Flat steel vertical position (section / min. diameter): 35x8 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 50x12 mm / 400 mm
Square bar (section / min. diameter): 18x18 mm / 250 mm
Round bar (section / min. diameter): Ø 22 mm / 200 mm
Tube (section / min. diameter): Ø 40x1,5 mm / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 30x15x2,5 mm / 500 mm
Form tube square (section / min. diameter): 25x25x2 mm / 450 mm
Angle leg outside (Querschnitt / min. Durchmesser): 35x35x5 mm / 400 mm
Angle leg inside (section / min. diameter): 30x30x4 mm / 550 mm
Length: 1050 mm
Width: 500 mm
Height: 1250 mm
Weight: 350 kg
5
Metal working and machine toolsSheet metal working machinesBending machines

Profile bending machine with manual feed of rolls HESSE by L

HESSE by LFSS PK 30
Shaft diameter: 30 Upper roll diameter: 148 mm Lower roll diameter: 118 mm Driven rolls: 2 Motor power: 0.7 / 0,85 kW Speed: 2/4 m/min Flat steel vertical position (section / min. diameter): 50x10 mm / 1.800 mm, 20x6 mm / 300 mm Flat steel horizontal position (section / min. diameter): 80x15 mm / 700 mm, 30 x 6 mm / 400 mm Square bar (section / min. diameter): 30x30 mm / 900 mm, 10x10 mm / 200 mm Round bar (section / min. diameter): Ø 30 mm / 900 mm, Ø 10 mm / 200 mm Tube (section / min. diameter): Ø 60x1,5 mm / 1.000 mm, Ø 25x1,5 mm / 600 mm, 1 1/2"x2,9 mm / 600 mm, 1/4"x1,8 mm / 300 mm Form tube vertical position (Querschnitt / min. Durchmesser): 50x30x3 mm / 1.200 mm, 40x20x2 mm / 800 mm Form tube square (section / min. diameter): 40x40x3 mm / 1.200 mm, 30x30x2 mm / 800 mm Angle leg outside (Querschnitt / min. Durchmesser): 40x40x5 mm / 600 mm, 30x30x4 mm / 300 mm Angle leg inside (section / min. diameter): 35x35x5 mm / 600 mm, 30x30x4 mm / 400 mm Length: 600 mm Width: 800 mm Height: 1450 mm Weight: 220 kg
Shaft diameter: 30
Upper roll diameter: 148 mm
Lower roll diameter: 118 mm
Driven rolls: 2
Motor power: 0.7 / 0,85 kW
Speed: 2/4 m/min
Flat steel vertical position (section / min. diameter): 50x10 mm / 1.800 mm, 20x6 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 80x15 mm / 700 mm, 30 x 6 mm / 400 mm
Square bar (section / min. diameter): 30x30 mm / 900 mm, 10x10 mm / 200 mm
Round bar (section / min. diameter): Ø 30 mm / 900 mm, Ø 10 mm / 200 mm
Tube (section / min. diameter): Ø 60x1,5 mm / 1.000 mm, Ø 25x1,5 mm / 600 mm, 1 1/2"x2,9 mm / 600 mm, 1/4"x1,8 mm / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 50x30x3 mm / 1.200 mm, 40x20x2 mm / 800 mm
Form tube square (section / min. diameter): 40x40x3 mm / 1.200 mm, 30x30x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 40x40x5 mm / 600 mm, 30x30x4 mm / 300 mm
Angle leg inside (section / min. diameter): 35x35x5 mm / 600 mm, 30x30x4 mm / 400 mm
Length: 600 mm
Width: 800 mm
Height: 1450 mm
Weight: 220 kg
6
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Medibender MD

ERCOLINA Medibender MD 070
Flexion modulus: 19 cm³ Standard steel tube: 38 x 1,5 mm Furniture tube: 38 x 1,5 mm FE35 (for hydraulic tubes): 35 x 3 mm Stainless steel AISI304-318: 30 x 2 mm Stainless steel AISI308 (food industry): 35 x 1,5 mm Brass soft: 42 x 1,5 mm Hard copper and aluminium: 42 x 1,5 mm Soft copper: 50 x 2 mm Conduit tube (TAZ): 50 x 2 mm Mepla, Gebereit and similar: 50 x 4 mm Roundbar solid (S275JO): 20 mm Squarebar solid (S275JO): 10 x 25 mm Flatsteel solid (S275JO): 25 x 20 (stehend), 25 x 16 (stehend) mm Max. bending radius: 180 mm Min. bending radius: 36 mm Min. tube Ø: 10 mm Max. bending speed: 2 r/min Motor: 0.9 kW Length: 245 mm Width: 300 mm Height: 320 mm Weight: 23 kg
Flexion modulus: 19 cm³
Standard steel tube: 38 x 1,5 mm
Furniture tube: 38 x 1,5 mm
FE35 (for hydraulic tubes): 35 x 3 mm
Stainless steel AISI304-318: 30 x 2 mm
Stainless steel AISI308 (food industry): 35 x 1,5 mm
Brass soft: 42 x 1,5 mm
Hard copper and aluminium: 42 x 1,5 mm
Soft copper: 50 x 2 mm
Conduit tube (TAZ): 50 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 20 mm
Squarebar solid (S275JO): 10 x 25 mm
Flatsteel solid (S275JO): 25 x 20 (stehend), 25 x 16 (stehend) mm
Max. bending radius: 180 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 2 r/min
Motor: 0.9 kW
Length: 245 mm
Width: 300 mm
Height: 320 mm
Weight: 23 kg
3
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Medibender MB

ERCOLINA Medibender MB 42T
Flexion modulus: 4 cm³ Standard steel tube: 42 x 3 mm Furniture tube: 48 x 1,5 mm FE35 (for hydraulic tubes): 42 x 4 mm Stainless steel AISI304-318: 42 x 3 mm Stainless steel AISI308 (food industry): 42 x 2,5 mm Brass soft: 50 x 3 mm Hard copper and aluminium: 54 x 2 mm Soft copper: 60 x 2 mm Conduit tube (TAZ): 60 x 2 mm Mepla, Gebereit and similar: 50 x 4 mm Roundbar solid (S275JO): 30 mm Flatsteel solid (S275JO): 40x20 (liegend), 40x12 (stehend) mm Max. bending radius: 260 mm Min. bending radius: 10 mm Max. bending speed: 4 r/min Motor: 1.1 kW Length: 400 mm Width: 570 mm Height: 1000 mm Weight: 80 kg
Flexion modulus: 4 cm³
Standard steel tube: 42 x 3 mm
Furniture tube: 48 x 1,5 mm
FE35 (for hydraulic tubes): 42 x 4 mm
Stainless steel AISI304-318: 42 x 3 mm
Stainless steel AISI308 (food industry): 42 x 2,5 mm
Brass soft: 50 x 3 mm
Hard copper and aluminium: 54 x 2 mm
Soft copper: 60 x 2 mm
Conduit tube (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 30 mm
Flatsteel solid (S275JO): 40x20 (liegend), 40x12 (stehend) mm
Max. bending radius: 260 mm
Min. bending radius: 10 mm
Max. bending speed: 4 r/min
Motor: 1.1 kW
Length: 400 mm
Width: 570 mm
Height: 1000 mm
Weight: 80 kg
5
Metal working and machine toolsSheet metal working machinesBending machines

Profile bending machine with hydraulic feed of rolls HESSE b

HESSE by SAHINLER HPK 50
Shaft diameter: 50 Upper roll diameter: 152 mm Lower roll diameter: 162 mm Driven rolls: 3 Motor power: 1.1 kW Speed: 4 m/min Flat steel vertical position (section / min. diameter): 60x10 mm / 600 mm, 20x10 mm / 300 mm Flat steel horizontal position (section / min. diameter): 100x15 mm / 600 mm, 50 x 10 mm / 300 mm Square bar (section / min. diameter): 35x35 mm / 600 mm, 15x15 mm / 300 mm Round bar (section / min. diameter): 35 mm / 600 mm, Dm. 20 mm / 300 mm Tube (section / min. diameter): 70x2 mm / 1200 mm, Dm. 25x1,5 mm / 400 mm, 2"x2,9 mm / 1000 mm, 1/2"x2,3 mm / 350 mm Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x3 mm / 1500 mm, 30x15x2 mm / 400 mm Form tube square (section / min. diameter): 50x50x3 mm / 1600 mm, 20x20x2 mm / 400 mm Angle leg outside (Querschnitt / min. Durchmesser): 50x50x6 mm / 600 mm, 30x30x3 mm / 400 mm Angle leg inside (section / min. diameter): 50x50x6 mm / 900 mm, 30x30x3 mm / 600 mm Length: 810 mm Width: 950 mm Height: 1500 mm Weight: 500 kg
Shaft diameter: 50
Upper roll diameter: 152 mm
Lower roll diameter: 162 mm
Driven rolls: 3
Motor power: 1.1 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 600 mm, 20x10 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 600 mm, 50 x 10 mm / 300 mm
Square bar (section / min. diameter): 35x35 mm / 600 mm, 15x15 mm / 300 mm
Round bar (section / min. diameter): 35 mm / 600 mm, Dm. 20 mm / 300 mm
Tube (section / min. diameter): 70x2 mm / 1200 mm, Dm. 25x1,5 mm / 400 mm, 2"x2,9 mm / 1000 mm, 1/2"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x3 mm / 1500 mm, 30x15x2 mm / 400 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1600 mm, 20x20x2 mm / 400 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x6 mm / 600 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 900 mm, 30x30x3 mm / 600 mm
Length: 810 mm
Width: 950 mm
Height: 1500 mm
Weight: 500 kg
3
Metal working and machine toolsSheet metal working machinesSection steel shears

Steelworker GEKA Bendicrop 130 SD

GEKA Bendicrop 130 SD
Punching power: 130 ton Throat depth: 600 mm Number of stations: 5 Cylinder: 2 Max. diameter at sheet thickness (mild steel): 50x18 mm Stroke: 80 mm Flat steel: 600x18 (max. 600x20 mit Deformation) mm Angle steel: 120x120x11 (max. 150x150x15 mit Deformation) mm Round / square steel: 45/40 mm Notcher: 130x12 mm Bending unit: 250x12 mm Motor: 15 kW
Punching power: 130 ton
Throat depth: 600 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 50x18 mm
Stroke: 80 mm
Flat steel: 600x18 (max. 600x20 mit Deformation) mm
Angle steel: 120x120x11 (max. 150x150x15 mit Deformation) mm
Round / square steel: 45/40 mm
Notcher: 130x12 mm
Bending unit: 250x12 mm
Motor: 15 kW
7
Packaging machineryBanderoling machines

Banding machines

ATS Ultra Sonic 2000-L
ATS Ultra Sonic 2000-L Banding machine ATS Band white 30 mm, 230 Volt
ATS Ultra Sonic 2000-L Banding machine

ATS Band white 30 mm,
230 Volt
1
Metal working and machine toolsSheet metal working machinesSection steel shears

Steelworker GEKA HYD 110 SD

GEKA HYD 110 SD
Punching power: 110 ton Throat depth: 610 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 420/20 bzw. 28/28 mm Stroke: 80 mm Strokes: 28 1/min Flat steel: 600x15 / 400x20 mm Angle steel: 152x152x13 mm Round / square steel: 50 mm Notcher: 13x52x90 mm Motor: 9 kW Length: 2690 mm Width: 1400 mm Height: 2200 mm Weight: 3300 kg
Punching power: 110 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 420/20 bzw. 28/28 mm
Stroke: 80 mm
Strokes: 28 1/min
Flat steel: 600x15 / 400x20 mm
Angle steel: 152x152x13 mm
Round / square steel: 50 mm
Notcher: 13x52x90 mm
Motor: 9 kW
Length: 2690 mm
Width: 1400 mm
Height: 2200 mm
Weight: 3300 kg
8
Food machinesPackaging machinery

Freemantle S03 Two flap sealer

Freemantle S03 Two flap sealer, Serial: 171028 Stainless, two flap sealer, hot melt glue pots, up to 20 cartons per min, mobile, 1Ph
Freemantle S03 Two flap sealer, Serial: 171028 Stainless, two flap sealer, hot melt glue pots, up to 20 cartons per min, mobile, 1Ph
8
Food machinesPackaging machinery

Freemantle TF Two flap sealer

Freemantle TF Two flap sealer, Serial: 98037 Stainless, two flap sealer, hot melt glue pots, overall length 3100mm, mobile
Freemantle TF Two flap sealer, Serial: 98037 Stainless, two flap sealer, hot melt glue pots, overall length 3100mm, mobile
2
Metal working and machine toolsPressesWorkshop press

Hydraulic multifunction workshop press SICMI PSL 100 A

SICMI PSL 100 A
pressing capacity: 100 to Cylinder fix or moveable: fix Bending length: 835 mm Stroke: 500 mm Daylight: 780 mm Distance between columns: 1050 mm Rapid speed: 25 mm/s Approaching speed with foot pedal mode: 10 mm/s Working speed: 4 mm/s Table: 800 x 600 mm Upper clamping plate: 700 x 350 mm Length: 1800 mm Width: 1000 mm Height: 2400 mm Weight: 2050 kg
pressing capacity: 100 to
Cylinder fix or moveable: fix
Bending length: 835 mm
Stroke: 500 mm
Daylight: 780 mm
Distance between columns: 1050 mm
Rapid speed: 25 mm/s
Approaching speed with foot pedal mode: 10 mm/s
Working speed: 4 mm/s
Table: 800 x 600 mm
Upper clamping plate: 700 x 350 mm
Length: 1800 mm
Width: 1000 mm
Height: 2400 mm
Weight: 2050 kg
5
Metal working and machine toolsPressesWorkshop press

Hydraulic workshop press HESSE by LFSS DPM-K 1070-100

HESSE by LFSS DPM-K 1070-100
pressing capacity: 100 to Cylinder fix or moveable: horizontal moveable Stroke: 300 mm Distance between columns: 1070 mm Working speed: 5 mm/s Retraction speed: 10 mm/s Length: 2110 mm Width: 1000 mm Height: 2430 mm Weight: 1500 kg
pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2430 mm
Weight: 1500 kg
7
Metal working and machine toolsLathesLathes

Lathe - cycle controlled

BOEHRINGER DNE 820/DL 3000
Turning diameter: 820 mm Turning length: 300mm Turning diameter over support: 465 mm Spindle torque: 3000 Nm Speed: 5.6-1120 rpm Feed: 1-5000mm/min Rapid traverse: 5000 mm/min Tailstock quill mount MK: 6 Three-jaw chuck Forckrath: mm Bezel: mm Main drive motor: 50 kW Main spindle diameter: 170 mm Spindle passage: 128 mm Tailstock quill diameter: 125 mm Tailstock quill stroke: 250 mm z-axis: 3000 mm x-axis: 550 mm Total power requirement: 52 kW Machine weight approx.: 7.1 t Space requirement approx.: m
Turning diameter: 820 mm
Turning length: 300mm
Turning diameter over support: 465 mm
Spindle torque: 3000 Nm
Speed: 5.6-1120 rpm
Feed: 1-5000mm/min
Rapid traverse: 5000 mm/min
Tailstock quill mount MK: 6
Three-jaw chuck Forckrath: mm
Bezel: mm
Main drive motor: 50 kW
Main spindle diameter: 170 mm
Spindle passage: 128 mm
Tailstock quill diameter: 125 mm
Tailstock quill stroke: 250 mm
z-axis: 3000 mm
x-axis: 550 mm
Total power requirement: 52 kW
Machine weight approx.: 7.1 t
Space requirement approx.: m
10
Metal working and machine toolsMilling machinesTravelling column milling machines

Traveling column milling machine

SORALUCE Dano Batgro FR-30000
x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain Type: TNC 530 i Milling head - pivoting: CNC Speed: 4000 rpm Cone mount: DIN 69871+AD mm Spindle motor: 46 kW Feed: 10000mm/min Rapid traverse: 25000 mm/min Chip conveyor: 2 pcs. Panel field: 30000x3000 mm Total power requirement: 85 kW Machine weight approx.: t Space requirement approx.: m
x-travel: 30000 mm
y-travel: 3600 mm
z-travel: 1900 mm
Control: Heidenhain
Type: TNC 530 i
Milling head - pivoting: CNC
Speed: 4000 rpm
Cone mount: DIN 69871+AD mm
Spindle motor: 46 kW
Feed: 10000mm/min
Rapid traverse: 25000 mm/min
Chip conveyor: 2 pcs.
Panel field: 30000x3000 mm
Total power requirement: 85 kW
Machine weight approx.: t
Space requirement approx.: m
9
Food machinesMeat processing

Frampton FR1-3 Flash roaster

Frampton FR1-3 Flash roaster, Stainless flash roaster, used when pre cooked meats need to have a roast finish, allows products such as hams to be roasted in under 3mins and still cool enough to be packed, ideal for meats, fish, veg and more, belt dimensions 2100mm x 140mm, variable speed, adjustable temp control, mobile, 3Ph
Frampton FR1-3 Flash roaster, Stainless flash roaster, used when pre cooked meats need to have a roast finish, allows products such as hams to be roasted in under 3mins and still cool enough to be packed, ideal for meats, fish, veg and more, belt dimensions 2100mm x 140mm, variable speed, adjustable temp control, mobile, 3Ph
3
Metal working and machine toolsSheet metal working machinesPress brakes

Hydraulic CNC press brake HESSE by DURMA AD-Servo 40600

HESSE by DURMA AD-Servo 40600
pressing capacity: 600 to Bending length: 4050 mm Axes: Y1 / Y2 / X und R Achse Stroke: 365 mm Inside distance between side frames: 3100 mm Gap in side frame: 410 mm Daylight: 700 mm Power concept: hydraulic rapid speed Y-axis: 160 mm/s Working speed Y-axis: 10 Retractionspeed Y-axis: 160 Back gauge travel X-axis: 650 mm Back gauge speed X-axis: 500 Back gauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Oiltank: 280 l Motor power: 2 x 11 kW Length: 5750 mm Width: 2500 mm Height: 4000 mm Weight: 40500 kg
pressing capacity: 600 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 3100 mm
Gap in side frame: 410 mm
Daylight: 700 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 280 l
Motor power: 2 x 11 kW
Length: 5750 mm
Width: 2500 mm
Height: 4000 mm
Weight: 40500 kg
10
Metal working and machine toolsMilling machinesTravelling column milling machines

Traveling column milling machine

SORALUCE SL 5000
x-travel: 3500 mm y-travel: 1600 mm z-travel: 900 mm Speed: 20-2000 rpm Spindle mount ISO: SK50 Table dimension: 5000x1000 mm Control: Heidenhain TNC 426 Spindle drive motor: 22 kW Rapid traverse: 5000 mm/min Machine weight approx.: 16 t
x-travel: 3500 mm
y-travel: 1600 mm
z-travel: 900 mm
Speed: 20-2000 rpm
Spindle mount ISO: SK50
Table dimension: 5000x1000 mm
Control: Heidenhain TNC 426
Spindle drive motor: 22 kW
Rapid traverse: 5000 mm/min
Machine weight approx.: 16 t
10
Printing machineryPost press machinesLaminating machines

Semi-Automatic Spot and Full Sheet laminating machine

Stock LM 123
Stock LM 123 A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet. Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine. Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box. A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P). Squeeze roller that presses the labelled sheets and blanks together. Integrated sensor for detecting and registering the glued label Label registering unit for placing and applying the corrugated blank to the glued label Manual feeding of the corrugated blank or box pressure roller Take-off table for the manual take-off of the labeled sheets / blanks. Integrated sheet counter. Siemens PLC control. Suction belt
Stock LM 123


A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.

Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.

Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.

A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).

Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
7
Metal working and machine toolsSheet metal working machinesPlate shears

Hydraulic plate shear SIMAT ATS 2006

SIMAT ATS 2006
Cutting length: 2050 mm Max. thickness - mild steel: 6 mm Strokes: 12 - 20 1/min Cutting angle: 0,5 – 3 ° Number of downholders: 13 pcs. Back gauge: 750 mm Motor power: 7.5 kW Table height: 770 mm Length: 2680 mm Width: 1650 mm Height: 1570 mm Weight: 3000 kg
Cutting length: 2050 mm
Max. thickness - mild steel: 6 mm
Strokes: 12 - 20 1/min
Cutting angle: 0,5 – 3 °
Number of downholders: 13 pcs.
Back gauge: 750 mm
Motor power: 7.5 kW
Table height: 770 mm
Length: 2680 mm
Width: 1650 mm
Height: 1570 mm
Weight: 3000 kg
6
Metal working and machine toolsSheet metal working machinesBending machines

Profile bending machine with hydraulic feed of rolls HESSE b

HESSE by DURMA PBH 60
Shaft diameter: 60 Rolls diameter: 177 mm Driven rolls: 3 Motor power: 3.7 kW Speed: 6 m/min Flat steel vertical position (section / min. diameter): 70x10 mm / 600 mm, 30x10 mm / 250 mm Flat steel horizontal position (section / min. diameter): 90x25 mm / 500 mm, 50x5 mm / 250 mm Square bar (section / min. diameter): 40x40 mm / 500 mm, 20x20 mm / 300 mm Round bar (section / min. diameter): Ø. 40 mm / 500 mm, Ø 20 mm / 300 mm Tube (section / min. diameter): Ø 60x2 mm / 600 mm, Ø 20x1 / 250 mm Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm Form tube square (section / min. diameter): 60x60x4 mm Angle leg outside (Querschnitt / min. Durchmesser): 50x5 mm / 1.000 mm, 30x4 mm / 350 mm Angle leg inside (section / min. diameter): 50x5 mm / 500 mm, 30x3 mm / 250 mm Length: 1160 mm Width: 1000 mm Height: 1175 mm Weight: 1194 kg
Shaft diameter: 60
Rolls diameter: 177 mm
Driven rolls: 3
Motor power: 3.7 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 70x10 mm / 600 mm, 30x10 mm / 250 mm
Flat steel horizontal position (section / min. diameter): 90x25 mm / 500 mm, 50x5 mm / 250 mm
Square bar (section / min. diameter): 40x40 mm / 500 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø. 40 mm / 500 mm, Ø 20 mm / 300 mm
Tube (section / min. diameter): Ø 60x2 mm / 600 mm, Ø 20x1 / 250 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm
Form tube square (section / min. diameter): 60x60x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x5 mm / 1.000 mm, 30x4 mm / 350 mm
Angle leg inside (section / min. diameter): 50x5 mm / 500 mm, 30x3 mm / 250 mm
Length: 1160 mm
Width: 1000 mm
Height: 1175 mm
Weight: 1194 kg
3
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Topbender TB 1

ERCOLINA Topbender TB 180 PT
Flexion modulus: 170 cm³ Standard steel tube: 150 x 9 mm Gas tube: 6" x 7,11 mm Furniture tube: 150 x 9 mm FE35 (for hydraulic tubes): 168,3 x 8,5 mm Stainless steel AISI304-318: 141,3 x 6,55 mm Stainless steel AISI308 (food industry): 141,3 x 6,55 mm Brass soft: 168,3 x 9 mm Hard copper and aluminium: 168,3 x 9 mm Soft copper: 168,3 x 9 mm Conduit tube (TAZ): 141,3 x 8 mm Mepla, Gebereit and similar: 150 x 6 mm Roundbar solid (S275JO): 110 mm Squarebar solid (S275JO): 90 x 90 mm Flatsteel solid (S275JO): 120 x 60 mm Square profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mm T-profile (S275JO): 120 x 120 x 10 mm U-profile (S275JO): 120 x 120 x 8 mm Max. bending radius: 800 mm Min. bending radius: 100 mm Min. tube Ø: 10 mm Max. bending speed: 1 r/min Motor: 15 kW Length: 1000 mm Width: 1900 mm Height: 1475 mm Weight: 2700 kg
Flexion modulus: 170 cm³
Standard steel tube: 150 x 9 mm
Gas tube: 6" x 7,11 mm
Furniture tube: 150 x 9 mm
FE35 (for hydraulic tubes): 168,3 x 8,5 mm
Stainless steel AISI304-318: 141,3 x 6,55 mm
Stainless steel AISI308 (food industry): 141,3 x 6,55 mm
Brass soft: 168,3 x 9 mm
Hard copper and aluminium: 168,3 x 9 mm
Soft copper: 168,3 x 9 mm
Conduit tube (TAZ): 141,3 x 8 mm
Mepla, Gebereit and similar: 150 x 6 mm
Roundbar solid (S275JO): 110 mm
Squarebar solid (S275JO): 90 x 90 mm
Flatsteel solid (S275JO): 120 x 60 mm
Square profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mm
T-profile (S275JO): 120 x 120 x 10 mm
U-profile (S275JO): 120 x 120 x 8 mm
Max. bending radius: 800 mm
Min. bending radius: 100 mm
Min. tube Ø: 10 mm
Max. bending speed: 1 r/min
Motor: 15 kW
Length: 1000 mm
Width: 1900 mm
Height: 1475 mm
Weight: 2700 kg
2
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Topbender TB 1

ERCOLINA Topbender TB 130 PT
Flexion modulus: 80 cm³ Standard steel tube: 127 x 7,1 mm Gas tube: 4" x 8,56 mm Furniture tube: 127 x 7,1 mm FE35 (for hydraulic tubes): 100 x 11 mm Stainless steel AISI304-318: 114,3 x 5,6 mm Stainless steel AISI308 (food industry): 114,3 x 5,6 mm Brass soft: 139,7 x 8,8 mm Hard copper and aluminium: 139,7 x 8,8 mm Soft copper: 139,7 x 8,8 mm Conduit tube (TAZ): 120 x 9 mm Mepla, Gebereit and similar: 120 x 6.5 mm Roundbar solid (S275JO): 90 mm Squarebar solid (S275JO): 75 x 75 mm Flatsteel solid (S275JO): 100 x 50 mm Square profile (S275JO): 120 x 60 x 9 bzw. 90 x 90 x 10 mm T-profile (S275JO): 100 x 100 x 10 mm U-profile (S275JO): 100 x 100 x 10 mm Max. bending radius: 700 mm Min. bending radius: 36 mm Min. tube Ø: 10 mm Max. bending speed: 0 - 0,75 r/min Motor: 3.5 kW Length: 850 mm Width: 1200 mm Height: 850 mm Weight: 720 kg
Flexion modulus: 80 cm³
Standard steel tube: 127 x 7,1 mm
Gas tube: 4" x 8,56 mm
Furniture tube: 127 x 7,1 mm
FE35 (for hydraulic tubes): 100 x 11 mm
Stainless steel AISI304-318: 114,3 x 5,6 mm
Stainless steel AISI308 (food industry): 114,3 x 5,6 mm
Brass soft: 139,7 x 8,8 mm
Hard copper and aluminium: 139,7 x 8,8 mm
Soft copper: 139,7 x 8,8 mm
Conduit tube (TAZ): 120 x 9 mm
Mepla, Gebereit and similar: 120 x 6.5 mm
Roundbar solid (S275JO): 90 mm
Squarebar solid (S275JO): 75 x 75 mm
Flatsteel solid (S275JO): 100 x 50 mm
Square profile (S275JO): 120 x 60 x 9 bzw. 90 x 90 x 10 mm
T-profile (S275JO): 100 x 100 x 10 mm
U-profile (S275JO): 100 x 100 x 10 mm
Max. bending radius: 700 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 0,75 r/min
Motor: 3.5 kW
Length: 850 mm
Width: 1200 mm
Height: 850 mm
Weight: 720 kg
2
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Topbender TB 1

ERCOLINA Topbender TB 100 PT
Flexion modulus: 43 cm³ Standard steel tube: 100 x 6 mm Gas tube: 3" 1/2 x 5,74 mm Furniture tube: 100 x 6 mm FE35 (for hydraulic tubes): 100 x 7,5 mm Stainless steel AISI304-318: 100 x 3,6 mm Stainless steel AISI308 (food industry): 100 x 3,6 mm Brass soft: 114.3 x 6,3 mm Hard copper and aluminium: 114,3 x 6,3 mm Soft copper: 114,3 x 6,3 mm Conduit tube (TAZ): 100 x 6 mm Mepla, Gebereit and similar: 100 x 5 mm Roundbar solid (S275JO): 70 mm Squarebar solid (S275JO): 60 x 60 mm Flatsteel solid (S275JO): 80 x 40 mm Square profile (S275JO): 100 x 60 x 4 bzw. 90 x 90 x 4 mm T-profile (S275JO): 90 x 90 x 6 mm U-profile (S275JO): 90 x 90 x 6 mm Max. bending radius: 400 mm Min. bending radius: 36 mm Min. tube Ø: 10 mm Max. bending speed: 0 - 1,3 r/min Motor: 3.5 kW Length: 500 mm Width: 1200 mm Height: 850 mm Weight: 480 kg
Flexion modulus: 43 cm³
Standard steel tube: 100 x 6 mm
Gas tube: 3" 1/2 x 5,74 mm
Furniture tube: 100 x 6 mm
FE35 (for hydraulic tubes): 100 x 7,5 mm
Stainless steel AISI304-318: 100 x 3,6 mm
Stainless steel AISI308 (food industry): 100 x 3,6 mm
Brass soft: 114.3 x 6,3 mm
Hard copper and aluminium: 114,3 x 6,3 mm
Soft copper: 114,3 x 6,3 mm
Conduit tube (TAZ): 100 x 6 mm
Mepla, Gebereit and similar: 100 x 5 mm
Roundbar solid (S275JO): 70 mm
Squarebar solid (S275JO): 60 x 60 mm
Flatsteel solid (S275JO): 80 x 40 mm
Square profile (S275JO): 100 x 60 x 4 bzw. 90 x 90 x 4 mm
T-profile (S275JO): 90 x 90 x 6 mm
U-profile (S275JO): 90 x 90 x 6 mm
Max. bending radius: 400 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 1,3 r/min
Motor: 3.5 kW
Length: 500 mm
Width: 1200 mm
Height: 850 mm
Weight: 480 kg
2
Metal working and machine toolsSheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Topbender TB 0

ERCOLINA Topbender TB 050 T
Flexion modulus: 10.5 cm³ Standard steel tube: 60 x 3 mm Gas tube: 2"Gas x 4 mm Furniture tube: 60 x 4 mm FE35 (for hydraulic tubes): 64 x 4 mm Stainless steel AISI304-318: 64 x 3 mm Stainless steel AISI308 (food industry): 60 x 4 mm Brass soft: 60 x 4 mm Hard copper and aluminium: 64 x 4 mm Soft copper: 64 x 4 mm Conduit tube (TAZ): 60 x 4 mm Mepla, Gebereit and similar: 50 x 4 mm Roundbar solid (S275JO): 35 mm Squarebar solid (S275JO): 30 x 30 mm Flatsteel solid (S275JO): 10 x 60 mm Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm T-profile (S275JO): 50 x 50 x 6 mm U-profile (S275JO): 40 x 20 x 6 mm Max. bending radius: 300 mm Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 1,25 / 2,60 r/min Motor: 1 kW Length: 595 mm Width: 363 mm Height: 900 mm Weight: 130 kg
Flexion modulus: 10.5 cm³
Standard steel tube: 60 x 3 mm
Gas tube: 2"Gas x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 4 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 4 mm
Brass soft: 60 x 4 mm
Hard copper and aluminium: 64 x 4 mm
Soft copper: 64 x 4 mm
Conduit tube (TAZ): 60 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 10 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,25 / 2,60 r/min
Motor: 1 kW
Length: 595 mm
Width: 363 mm
Height: 900 mm
Weight: 130 kg
1
Metal working and machine toolsSheet metal working machinesBending machines

Profile bending machine with hydraulic feed of rolls HESSE b

HESSE by SAHINLER HPK 100
Shaft diameter: 100 Rolls diameter: 315 mm Driven rolls: 3 Motor power: 7.5 kW Speed: 7 m/min Flat steel vertical position (section / min. diameter): 100x20 mm / 800 mm, 30x10 mm / 400 mm Flat steel horizontal position (section / min. diameter): 200x30 mm / 1.200 mm, 160x35 mm / 800 mm, 80x5 mm / 400 mm Square bar (section / min. diameter): 60x60 mm / 750 mm, 15x15 mm / 400 mm Round bar (section / min. diameter): Ø 75 mm / 800 mm, Ø 15 mm / 450 mm Tube (section / min. diameter): Ø 125x2,5 mm / 1.400 mm, Ø 15x1 mm / 450 mm, Ø 4"x6,02 / 1.000 mm, Ø 1/2"x2,77 / 450 mm Form tube vertical position (Querschnitt / min. Durchmesser): 100x40x4 mm / 1.300 mm, 25x15x2 mm / 450 mm Form tube square (section / min. diameter): 80x80x5 mm / 1.500 mm, 25x25x2 mm / 450 mm Angle leg outside (Querschnitt / min. Durchmesser): 100x100x12 mm / 1.000 mm, 40x40x4 mm / 700 mm Angle leg inside (section / min. diameter): 100x100x10 mm / 1.000 mm, 40x40x4 mm / 550 mm UPN leg outside (section / min. diameter): UPN 180 / 900 mm, UPN 30 / 400 mm UPN leg inside (section / min. diameter): UPN 180 / 1.000 mm, UPN 30 / 400 mm IPN horizontal position (section / min. diameter): IPN 180 / 1.000 mm, IPN 80 / 400 mm Length: 1465 mm Width: 2000 mm Height: 1700 mm Weight: 4000 kg
Shaft diameter: 100
Rolls diameter: 315 mm
Driven rolls: 3
Motor power: 7.5 kW
Speed: 7 m/min
Flat steel vertical position (section / min. diameter): 100x20 mm / 800 mm, 30x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 200x30 mm / 1.200 mm, 160x35 mm / 800 mm, 80x5 mm / 400 mm
Square bar (section / min. diameter): 60x60 mm / 750 mm, 15x15 mm / 400 mm
Round bar (section / min. diameter): Ø 75 mm / 800 mm, Ø 15 mm / 450 mm
Tube (section / min. diameter): Ø 125x2,5 mm / 1.400 mm, Ø 15x1 mm / 450 mm, Ø 4"x6,02 / 1.000 mm, Ø 1/2"x2,77 / 450 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 100x40x4 mm / 1.300 mm, 25x15x2 mm / 450 mm
Form tube square (section / min. diameter): 80x80x5 mm / 1.500 mm, 25x25x2 mm / 450 mm
Angle leg outside (Querschnitt / min. Durchmesser): 100x100x12 mm / 1.000 mm, 40x40x4 mm / 700 mm
Angle leg inside (section / min. diameter): 100x100x10 mm / 1.000 mm, 40x40x4 mm / 550 mm
UPN leg outside (section / min. diameter): UPN 180 / 900 mm, UPN 30 / 400 mm
UPN leg inside (section / min. diameter): UPN 180 / 1.000 mm, UPN 30 / 400 mm
IPN horizontal position (section / min. diameter): IPN 180 / 1.000 mm, IPN 80 / 400 mm
Length: 1465 mm
Width: 2000 mm
Height: 1700 mm
Weight: 4000 kg
1
Metal working and machine toolsSheet metal working machinesBending machines

Profile bending machine with hydraulic feed of rolls HESSE b

HESSE by ISITAN 3R HPK 80
Shaft diameter: 80 Rolls diameter: 260 mm Driven rolls: 3 Motor power: 7.5 kW Speed: 6 m/min Flat steel vertical position (section / min. diameter): 80x15 mm / 800 mm, 40x10 mm / 400 mm Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x8 mm / 400 mm Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 350 mm Round bar (section / min. diameter): Ø 50 mm / 600 mm, Ø 15 mm / 350 mm Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 350 mm, Ø 3"x5,48 / 800 mm, Ø 3/8"x1,65 / 400 mm Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 400 mm Form tube square (section / min. diameter): 70x70x3 mm / 1.400 mm, 40x40x2 mm / 800 mm Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 40x40x4 mm / 400 mm Angle leg inside (section / min. diameter): 80x80x8 mm / 1.000 mm, 40x40x4 mm / 400 mm UPN leg outside (section / min. diameter): UPN 120 / 800 mm UPN leg inside (section / min. diameter): UPN 120 / 800 mm IPN horizontal position (section / min. diameter): IPN 120 / 800 mm Length: 1150 mm Width: 1200 mm Height: 1300 mm Weight: 1600 kg
Shaft diameter: 80
Rolls diameter: 260 mm
Driven rolls: 3
Motor power: 7.5 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 80x15 mm / 800 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x8 mm / 400 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 600 mm, Ø 15 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 350 mm, Ø 3"x5,48 / 800 mm, Ø 3/8"x1,65 / 400 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 400 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.400 mm, 40x40x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 40x40x4 mm / 400 mm
Angle leg inside (section / min. diameter): 80x80x8 mm / 1.000 mm, 40x40x4 mm / 400 mm
UPN leg outside (section / min. diameter): UPN 120 / 800 mm
UPN leg inside (section / min. diameter): UPN 120 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 800 mm
Length: 1150 mm
Width: 1200 mm
Height: 1300 mm
Weight: 1600 kg
1
Metal working and machine toolsSheet metal working machinesBending machines

Profile bending machine with hydraulic feed of rolls HESSE b

HESSE by SAHINLER HPK 80
Shaft diameter: 80 Rolls diameter: 245 mm Driven rolls: 3 Motor power: 4 kW Speed: 6 m/min Flat steel vertical position (section / min. diameter): 100x20 mm / 2000 mm, 80x20 mm / 800 mm, 30x10 / 300 Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x5 mm / 300 mm Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 380 mm Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 15 mm / 380 mm Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 380 mm, Ø 3"x5,48 / 800 mm, Ø 1/2"x2,77 / 380 mm Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 350 mm Form tube square (section / min. diameter): 70x70x3 mm / 1.300 mm, 25x25x2 mm / 350 mm Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 30x30x3 mm / 400 mm Angle leg inside (section / min. diameter): 70x70x7 mm / 700 mm, 30x30x3 mm / 450 mm UPN leg outside (section / min. diameter): UPN 140 / 1600 mm, UPN 120 / 900 mm, UPN 100 / 800 mm UPN leg inside (section / min. diameter): UPN 140 / 1.600 mm, UPN 120 / 1000 mm, UPN 100 / 800 mm IPN horizontal position (section / min. diameter): IPN 120 / 600 mm, IPN 80 / 400 mm Length: 1450 mm Width: 1000 mm Height: 1400 mm Weight: 1700 kg
Shaft diameter: 80
Rolls diameter: 245 mm
Driven rolls: 3
Motor power: 4 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 100x20 mm / 2000 mm, 80x20 mm / 800 mm, 30x10 / 300
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x5 mm / 300 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 380 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 15 mm / 380 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 380 mm, Ø 3"x5,48 / 800 mm, Ø 1/2"x2,77 / 380 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 350 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.300 mm, 25x25x2 mm / 350 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 700 mm, 30x30x3 mm / 450 mm
UPN leg outside (section / min. diameter): UPN 140 / 1600 mm, UPN 120 / 900 mm, UPN 100 / 800 mm
UPN leg inside (section / min. diameter): UPN 140 / 1.600 mm, UPN 120 / 1000 mm, UPN 100 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 600 mm, IPN 80 / 400 mm
Length: 1450 mm
Width: 1000 mm
Height: 1400 mm
Weight: 1700 kg
1
Metal working and machine toolsSheet metal working machinesBending machines

Profile bending machine with hydraulic feed of rolls HESSE b

HESSE by SAHINLER HPK 60
Shaft diameter: 60 Upper roll diameter: 215 mm Lower roll diameter: 215 mm Driven rolls: 3 Motor power: 1.5 kW Speed: 4 m/min Flat steel vertical position (section / min. diameter): 80x20 mm / 1200 mm, 40x10 mm / 400 mm Flat steel horizontal position (section / min. diameter): 120x25 mm / 600 mm, 50 x 10 mm / 400 mm Square bar (section / min. diameter): 50x50 mm / 800 mm, 20x20 mm / 400 mm Round bar (section / min. diameter): Ø 50 mm / 800 mm, Ø 20 mm / 400 mm Tube (section / min. diameter): Ø 100x2 mm / 1600 mm, Ø 60x2 mm / 500 mm, 3"x3,2 mm / 1600 mm, 1"x2,6 mm / 500 mm Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm / 1400 mm, 40x20x2 mm / 500 mm Form tube square (section / min. diameter): 70x3 mm / 1600 mm, 40x2 mm / 500 mm Angle leg outside (Querschnitt / min. Durchmesser): 70x70x7 mm / 1000 mm, 40x40x5 mm / 500 mm Angle leg inside (section / min. diameter): 70x70x7 mm / 1200 mm, 40x40x5 mm / 600 mm Length: 1000 mm Width: 1400 mm Height: 1650 mm Weight: 950 kg
Shaft diameter: 60
Upper roll diameter: 215 mm
Lower roll diameter: 215 mm
Driven rolls: 3
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 80x20 mm / 1200 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 120x25 mm / 600 mm, 50 x 10 mm / 400 mm
Square bar (section / min. diameter): 50x50 mm / 800 mm, 20x20 mm / 400 mm
Round bar (section / min. diameter): Ø 50 mm / 800 mm, Ø 20 mm / 400 mm
Tube (section / min. diameter): Ø 100x2 mm / 1600 mm, Ø 60x2 mm / 500 mm, 3"x3,2 mm / 1600 mm, 1"x2,6 mm / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm / 1400 mm, 40x20x2 mm / 500 mm
Form tube square (section / min. diameter): 70x3 mm / 1600 mm, 40x2 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 70x70x7 mm / 1000 mm, 40x40x5 mm / 500 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 1200 mm, 40x40x5 mm / 600 mm
Length: 1000 mm
Width: 1400 mm
Height: 1650 mm
Weight: 950 kg
1
Metal working and machine toolsSheet metal working machinesSection steel shears

Steelworker GEKA HYD 80 SD

GEKA HYD 80 SD
Punching power: 80 ton Throat depth: 500 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm Stroke: 70 mm Strokes: 40 1/min Flat steel: 450x15 / 300x20 mm Angle steel: 130x130x13 mm Round / square steel: 45 mm Notcher: 12x52x90 mm Motor: 9 kW Length: 2310 mm Width: 1200 mm Height: 2050 mm Weight: 2400 kg
Punching power: 80 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2400 kg
5
Metal working and machine toolsSheet metal working machinesSection steel shears

Steelworkers GEKA HYD 80 S

GEKA HYD 80 S
Punching power: 80 ton Throat depth: 300 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm Stroke: 70 mm Strokes: 40 1/min Flat steel: 450x15 / 300x20 mm Angle steel: 130x130x13 mm Round / square steel: 45 mm Notcher: 12x52x90 mm Motor: 9 kW Length: 2310 mm Width: 1200 mm Height: 2050 mm Weight: 2070 kg
Punching power: 80 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2070 kg
3
Metal working and machine toolsSheet metal working machinesSection steel shears

Steelworker GEKA BENDICROP 85 SD

GEKA BENDICROP 85 SD
Punching power: 85 ton Throat depth: 500 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm Flat steel: 450x15 / 450x18 mm Blade length: 475 mm Angle steel: 130x130x13 mm Round / square steel: 45/40 mm Notcher: 12 mm Bending unit: 200x12 mm Motor: 9 kW Length: 2300 mm Width: 1200 mm Height: 2100 mm Weight: 2400 kg
Punching power: 85 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
2
Metal working and machine toolsSheet metal working machinesSection steel shears

Steelworker GEKA BENDICROP 85 S

GEKA BENDICROP 85 S
Punching power: 85 ton Throat depth: 300 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm Flat steel: 450x15 / 450x18 mm Blade length: 475 mm Angle steel: 130x130x13 mm Round / square steel: 45/40 mm Notcher: 12 mm Bending unit: 200x12 mm Motor: 9 kW Length: 2300 mm Width: 1200 mm Height: 2100 mm Weight: 2400 kg
Punching power: 85 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
6
Metal working and machine toolsSheet metal working machinesSection steel shears

Steelworker GEKA Bendicrop 60 SD Semipaxy 1000x400

GEKA Bendicrop 60 SD Semipaxy 1000x400
Punching power: 60 ton Throat depth: 500 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40x11 mm Stroke: 32 mm Flat steel: 350x15 mm Angle steel: 120x10 mm Round / square steel: 45/40 mm Bending unit: 150x10 mm Motor: 5.5 kW Length: 1950 mm Width: 2000 mm Height: 1900 mm Weight: 1900 kg
Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40x11 mm
Stroke: 32 mm
Flat steel: 350x15 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
Motor: 5.5 kW
Length: 1950 mm
Width: 2000 mm
Height: 1900 mm
Weight: 1900 kg
2
Metal working and machine toolsSheet metal working machinesSection steel shears

Steelworker GEKA Bendicrop 60 SD

GEKA Bendicrop 60 SD
Punching power: 60 ton Throat depth: 500 mm Number of stations: 5 Cylinder: 2 Max. diameter at sheet thickness (mild steel): 40x11 mm Flat steel: 350x10 mm Angle steel: 120x10 mm Round / square steel: 45/40 mm Bending unit: 150x10 mm
Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x11 mm
Flat steel: 350x10 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
4
Metal working and machine toolsSheet metal working machinesPress brakes

Conventional press brake HESSE by ISITAN Edgebender 1540

HESSE by ISITAN Edgebender 1540
pressing capacity: 40 to Bending length: 1500 mm Axes: X and Y axis Stroke: 160 mm Inside distance between side frames: 1100 mm Gap in side frame: 320 mm Daylight: 390 mm Power concept: hydraulic rapid speed Y-axis: 150 mm/s Working speed Y-axis: 10 Back gauge travel X-axis: 500 mm Motor power: 4 kW Length: 1700 mm Width: 1600 mm Height: 2230 mm Weight: 3450 kg
pressing capacity: 40 to
Bending length: 1500 mm
Axes: X and Y axis
Stroke: 160 mm
Inside distance between side frames: 1100 mm
Gap in side frame: 320 mm
Daylight: 390 mm
Power concept: hydraulic
rapid speed Y-axis: 150 mm/s
Working speed Y-axis: 10
Back gauge travel X-axis: 500 mm
Motor power: 4 kW
Length: 1700 mm
Width: 1600 mm
Height: 2230 mm
Weight: 3450 kg
7
Other machinery

Albis / Weidemann TWDM 8+15/40 Angled Belt Conveyor

Albis / Weidemann TWDM 8+15/40
Weight of machine: 170 kg Dimensions see picture / drawing, height + inclination adjustable, splitted band, height of cleats 15 mm, splitting of cleats 300 mm
Weight of machine: 170 kg

Dimensions see picture / drawing, height + inclination adjustable, splitted band, height of cleats 15 mm, splitting of cleats 300 mm
9
Metal working and machine toolsMilling machinesOther

Bearbeitungszentrum - Vertikal

MATSUURA RA-2
x-Weg: 600 mmy-Weg: 410 mmz-Weg: 470 mmArbeitshöhe: 620 mmTischfläche: 600x380 mmAnzahl der Paletten: 2Drehzahl: 30-7000 U/minSpindeldurchmesser: 75 mmWerkzeugwechsler: 30Steuerung: MatsuuraTyp: MX 3 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 600 mm
y-Weg: 410 mm
z-Weg: 470 mm
Arbeitshöhe: 620 mm
Tischfläche: 600x380 mm
Anzahl der Paletten: 2
Drehzahl: 30-7000 U/min
Spindeldurchmesser: 75 mm
Werkzeugwechsler: 30
Steuerung: Matsuura
Typ: MX 3 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
6
Food machinesBakery-, pastry equipmentCutting machines

Scharfen V330 meat slicer

stainless, ideal for slicing ham, cheese and other fresh meats, 1Ph, 330mm diameter blade, (four in stock from 2016 - 2018)
stainless, ideal for slicing ham, cheese and other fresh meats, 1Ph, 330mm diameter blade, (four in stock from 2016 - 2018)
6
Food machinesOther

NNP Stainless 90 degree slat band conveyor

Plastic 200mm wide slats 1200 and 900mm centre of straight sections to bend
Plastic 200mm wide slats 1200 and 900mm centre of straight sections to bend
Save search
  • You will receive free new offers by e-mail
  • You can end the search request at any time
  • Your email address will not be shared with third parties under any circumstances
Here you can advertise.
Contact us for a non-binding offer.
Get offer
Not yet registered ?

Click on the "More Information" button to find out more about our services and prices.

For each of our offered tariffs there is a trial period of 6 months. Try us for free !
Sign up now for free