5
Food machinesAccessories and spare parts
Fuyi DL999 Quantitive filling machine, Stainless auto weighing and filling machine, 10g - 999g, filling speed up to 15pcs per min, filling error +or- 2g, mobile, 1Ph
Fuyi DL999 Quantitive filling machine, Stainless auto weighing and filling machine, 10g - 999g, filling speed up to 15pcs per min, filling error +or- 2g, mobile, 1Ph
12
Food machinesPackaging machinery
Pentavac Penta2100 VFFS bagger, 2007, vertical form fill and seal machine, 300mm jaw width, adjustable temperature controls, with printer, touch screen controls, with outfeed conveyor, belt width 280mm, belt height 950mm, with four different forming sets, with manual and box of spares, 3Ph
Pentavac Penta2100 VFFS bagger, 2007, vertical form fill and seal machine, 300mm jaw width, adjustable temperature controls, with printer, touch screen controls, with outfeed conveyor, belt width 280mm, belt height 950mm, with four different forming sets, with manual and box of spares, 3Ph
8
Food machinesCatering technologyWashing machines
IWM SAN100 SP Sanitiser tunnel, 2010, stainless, aperture 600mm x 600mm, belt dimensions 1800mm x 600mm, with recirculation tank, filter, level sensor, 3Ph
IWM SAN100 SP Sanitiser tunnel, 2010, stainless, aperture 600mm x 600mm, belt dimensions 1800mm x 600mm, with recirculation tank, filter, level sensor, 3Ph
14
Metal working and machine toolsOther
Temperature range: in Helium 2275 ° C
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good
High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.
Temperature range: in Helium 2275 ° C
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good
High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good
High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.
9
Packaging machineryPacking machinesPackaging machinery
Beck MP 240 X Foil Packaging Machine
Model: Multiplex type MP
Year: 2003
Beck MP 240 X Foil Packaging Machine
Model: Multiplex type MP
Year: 2003
Model: Multiplex type MP
Year: 2003
6
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 60
Rolls diameter: 177 mm
Driven rolls: 3
Motor power: 3.7 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 70x10 mm / 600 mm, 30x10 mm / 250 mm
Flat steel horizontal position (section / min. diameter): 90x25 mm / 500 mm, 50x5 mm / 250 mm
Square bar (section / min. diameter): 40x40 mm / 500 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø. 40 mm / 500 mm, Ø 20 mm / 300 mm
Tube (section / min. diameter): Ø 60x2 mm / 600 mm, Ø 20x1 / 250 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm
Form tube square (section / min. diameter): 60x60x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x5 mm / 1.000 mm, 30x4 mm / 350 mm
Angle leg inside (section / min. diameter): 50x5 mm / 500 mm, 30x3 mm / 250 mm
Length: 1160 mm
Width: 1000 mm
Height: 1175 mm
Weight: 1194 kg
Shaft diameter: 60
Rolls diameter: 177 mm
Driven rolls: 3
Motor power: 3.7 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 70x10 mm / 600 mm, 30x10 mm / 250 mm
Flat steel horizontal position (section / min. diameter): 90x25 mm / 500 mm, 50x5 mm / 250 mm
Square bar (section / min. diameter): 40x40 mm / 500 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø. 40 mm / 500 mm, Ø 20 mm / 300 mm
Tube (section / min. diameter): Ø 60x2 mm / 600 mm, Ø 20x1 / 250 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm
Form tube square (section / min. diameter): 60x60x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x5 mm / 1.000 mm, 30x4 mm / 350 mm
Angle leg inside (section / min. diameter): 50x5 mm / 500 mm, 30x3 mm / 250 mm
Length: 1160 mm
Width: 1000 mm
Height: 1175 mm
Weight: 1194 kg
Rolls diameter: 177 mm
Driven rolls: 3
Motor power: 3.7 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 70x10 mm / 600 mm, 30x10 mm / 250 mm
Flat steel horizontal position (section / min. diameter): 90x25 mm / 500 mm, 50x5 mm / 250 mm
Square bar (section / min. diameter): 40x40 mm / 500 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø. 40 mm / 500 mm, Ø 20 mm / 300 mm
Tube (section / min. diameter): Ø 60x2 mm / 600 mm, Ø 20x1 / 250 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm
Form tube square (section / min. diameter): 60x60x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x5 mm / 1.000 mm, 30x4 mm / 350 mm
Angle leg inside (section / min. diameter): 50x5 mm / 500 mm, 30x3 mm / 250 mm
Length: 1160 mm
Width: 1000 mm
Height: 1175 mm
Weight: 1194 kg
3
Metal working and machine toolsSheet metal working machinesPipe-bending machines
Flexion modulus: 170 cm³
Standard steel tube: 150 x 9 mm
Gas tube: 6" x 7,11 mm
Furniture tube: 150 x 9 mm
FE35 (for hydraulic tubes): 168,3 x 8,5 mm
Stainless steel AISI304-318: 141,3 x 6,55 mm
Stainless steel AISI308 (food industry): 141,3 x 6,55 mm
Brass soft: 168,3 x 9 mm
Hard copper and aluminium: 168,3 x 9 mm
Soft copper: 168,3 x 9 mm
Conduit tube (TAZ): 141,3 x 8 mm
Mepla, Gebereit and similar: 150 x 6 mm
Roundbar solid (S275JO): 110 mm
Squarebar solid (S275JO): 90 x 90 mm
Flatsteel solid (S275JO): 120 x 60 mm
Square profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mm
T-profile (S275JO): 120 x 120 x 10 mm
U-profile (S275JO): 120 x 120 x 8 mm
Max. bending radius: 800 mm
Min. bending radius: 100 mm
Min. tube Ø: 10 mm
Max. bending speed: 1 r/min
Motor: 15 kW
Length: 1000 mm
Width: 1900 mm
Height: 1475 mm
Weight: 2700 kg
Flexion modulus: 170 cm³
Standard steel tube: 150 x 9 mm
Gas tube: 6" x 7,11 mm
Furniture tube: 150 x 9 mm
FE35 (for hydraulic tubes): 168,3 x 8,5 mm
Stainless steel AISI304-318: 141,3 x 6,55 mm
Stainless steel AISI308 (food industry): 141,3 x 6,55 mm
Brass soft: 168,3 x 9 mm
Hard copper and aluminium: 168,3 x 9 mm
Soft copper: 168,3 x 9 mm
Conduit tube (TAZ): 141,3 x 8 mm
Mepla, Gebereit and similar: 150 x 6 mm
Roundbar solid (S275JO): 110 mm
Squarebar solid (S275JO): 90 x 90 mm
Flatsteel solid (S275JO): 120 x 60 mm
Square profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mm
T-profile (S275JO): 120 x 120 x 10 mm
U-profile (S275JO): 120 x 120 x 8 mm
Max. bending radius: 800 mm
Min. bending radius: 100 mm
Min. tube Ø: 10 mm
Max. bending speed: 1 r/min
Motor: 15 kW
Length: 1000 mm
Width: 1900 mm
Height: 1475 mm
Weight: 2700 kg
Standard steel tube: 150 x 9 mm
Gas tube: 6" x 7,11 mm
Furniture tube: 150 x 9 mm
FE35 (for hydraulic tubes): 168,3 x 8,5 mm
Stainless steel AISI304-318: 141,3 x 6,55 mm
Stainless steel AISI308 (food industry): 141,3 x 6,55 mm
Brass soft: 168,3 x 9 mm
Hard copper and aluminium: 168,3 x 9 mm
Soft copper: 168,3 x 9 mm
Conduit tube (TAZ): 141,3 x 8 mm
Mepla, Gebereit and similar: 150 x 6 mm
Roundbar solid (S275JO): 110 mm
Squarebar solid (S275JO): 90 x 90 mm
Flatsteel solid (S275JO): 120 x 60 mm
Square profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mm
T-profile (S275JO): 120 x 120 x 10 mm
U-profile (S275JO): 120 x 120 x 8 mm
Max. bending radius: 800 mm
Min. bending radius: 100 mm
Min. tube Ø: 10 mm
Max. bending speed: 1 r/min
Motor: 15 kW
Length: 1000 mm
Width: 1900 mm
Height: 1475 mm
Weight: 2700 kg
2
Metal working and machine toolsSheet metal working machinesPipe-bending machines
Flexion modulus: 80 cm³
Standard steel tube: 127 x 7,1 mm
Gas tube: 4" x 8,56 mm
Furniture tube: 127 x 7,1 mm
FE35 (for hydraulic tubes): 100 x 11 mm
Stainless steel AISI304-318: 114,3 x 5,6 mm
Stainless steel AISI308 (food industry): 114,3 x 5,6 mm
Brass soft: 139,7 x 8,8 mm
Hard copper and aluminium: 139,7 x 8,8 mm
Soft copper: 139,7 x 8,8 mm
Conduit tube (TAZ): 120 x 9 mm
Mepla, Gebereit and similar: 120 x 6.5 mm
Roundbar solid (S275JO): 90 mm
Squarebar solid (S275JO): 75 x 75 mm
Flatsteel solid (S275JO): 100 x 50 mm
Square profile (S275JO): 120 x 60 x 9 bzw. 90 x 90 x 10 mm
T-profile (S275JO): 100 x 100 x 10 mm
U-profile (S275JO): 100 x 100 x 10 mm
Max. bending radius: 700 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 0,75 r/min
Motor: 3.5 kW
Length: 850 mm
Width: 1200 mm
Height: 850 mm
Weight: 720 kg
Flexion modulus: 80 cm³
Standard steel tube: 127 x 7,1 mm
Gas tube: 4" x 8,56 mm
Furniture tube: 127 x 7,1 mm
FE35 (for hydraulic tubes): 100 x 11 mm
Stainless steel AISI304-318: 114,3 x 5,6 mm
Stainless steel AISI308 (food industry): 114,3 x 5,6 mm
Brass soft: 139,7 x 8,8 mm
Hard copper and aluminium: 139,7 x 8,8 mm
Soft copper: 139,7 x 8,8 mm
Conduit tube (TAZ): 120 x 9 mm
Mepla, Gebereit and similar: 120 x 6.5 mm
Roundbar solid (S275JO): 90 mm
Squarebar solid (S275JO): 75 x 75 mm
Flatsteel solid (S275JO): 100 x 50 mm
Square profile (S275JO): 120 x 60 x 9 bzw. 90 x 90 x 10 mm
T-profile (S275JO): 100 x 100 x 10 mm
U-profile (S275JO): 100 x 100 x 10 mm
Max. bending radius: 700 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 0,75 r/min
Motor: 3.5 kW
Length: 850 mm
Width: 1200 mm
Height: 850 mm
Weight: 720 kg
Standard steel tube: 127 x 7,1 mm
Gas tube: 4" x 8,56 mm
Furniture tube: 127 x 7,1 mm
FE35 (for hydraulic tubes): 100 x 11 mm
Stainless steel AISI304-318: 114,3 x 5,6 mm
Stainless steel AISI308 (food industry): 114,3 x 5,6 mm
Brass soft: 139,7 x 8,8 mm
Hard copper and aluminium: 139,7 x 8,8 mm
Soft copper: 139,7 x 8,8 mm
Conduit tube (TAZ): 120 x 9 mm
Mepla, Gebereit and similar: 120 x 6.5 mm
Roundbar solid (S275JO): 90 mm
Squarebar solid (S275JO): 75 x 75 mm
Flatsteel solid (S275JO): 100 x 50 mm
Square profile (S275JO): 120 x 60 x 9 bzw. 90 x 90 x 10 mm
T-profile (S275JO): 100 x 100 x 10 mm
U-profile (S275JO): 100 x 100 x 10 mm
Max. bending radius: 700 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 0,75 r/min
Motor: 3.5 kW
Length: 850 mm
Width: 1200 mm
Height: 850 mm
Weight: 720 kg
2
Metal working and machine toolsSheet metal working machinesPipe-bending machines
Flexion modulus: 43 cm³
Standard steel tube: 100 x 6 mm
Gas tube: 3" 1/2 x 5,74 mm
Furniture tube: 100 x 6 mm
FE35 (for hydraulic tubes): 100 x 7,5 mm
Stainless steel AISI304-318: 100 x 3,6 mm
Stainless steel AISI308 (food industry): 100 x 3,6 mm
Brass soft: 114.3 x 6,3 mm
Hard copper and aluminium: 114,3 x 6,3 mm
Soft copper: 114,3 x 6,3 mm
Conduit tube (TAZ): 100 x 6 mm
Mepla, Gebereit and similar: 100 x 5 mm
Roundbar solid (S275JO): 70 mm
Squarebar solid (S275JO): 60 x 60 mm
Flatsteel solid (S275JO): 80 x 40 mm
Square profile (S275JO): 100 x 60 x 4 bzw. 90 x 90 x 4 mm
T-profile (S275JO): 90 x 90 x 6 mm
U-profile (S275JO): 90 x 90 x 6 mm
Max. bending radius: 400 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 1,3 r/min
Motor: 3.5 kW
Length: 500 mm
Width: 1200 mm
Height: 850 mm
Weight: 480 kg
Flexion modulus: 43 cm³
Standard steel tube: 100 x 6 mm
Gas tube: 3" 1/2 x 5,74 mm
Furniture tube: 100 x 6 mm
FE35 (for hydraulic tubes): 100 x 7,5 mm
Stainless steel AISI304-318: 100 x 3,6 mm
Stainless steel AISI308 (food industry): 100 x 3,6 mm
Brass soft: 114.3 x 6,3 mm
Hard copper and aluminium: 114,3 x 6,3 mm
Soft copper: 114,3 x 6,3 mm
Conduit tube (TAZ): 100 x 6 mm
Mepla, Gebereit and similar: 100 x 5 mm
Roundbar solid (S275JO): 70 mm
Squarebar solid (S275JO): 60 x 60 mm
Flatsteel solid (S275JO): 80 x 40 mm
Square profile (S275JO): 100 x 60 x 4 bzw. 90 x 90 x 4 mm
T-profile (S275JO): 90 x 90 x 6 mm
U-profile (S275JO): 90 x 90 x 6 mm
Max. bending radius: 400 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 1,3 r/min
Motor: 3.5 kW
Length: 500 mm
Width: 1200 mm
Height: 850 mm
Weight: 480 kg
Standard steel tube: 100 x 6 mm
Gas tube: 3" 1/2 x 5,74 mm
Furniture tube: 100 x 6 mm
FE35 (for hydraulic tubes): 100 x 7,5 mm
Stainless steel AISI304-318: 100 x 3,6 mm
Stainless steel AISI308 (food industry): 100 x 3,6 mm
Brass soft: 114.3 x 6,3 mm
Hard copper and aluminium: 114,3 x 6,3 mm
Soft copper: 114,3 x 6,3 mm
Conduit tube (TAZ): 100 x 6 mm
Mepla, Gebereit and similar: 100 x 5 mm
Roundbar solid (S275JO): 70 mm
Squarebar solid (S275JO): 60 x 60 mm
Flatsteel solid (S275JO): 80 x 40 mm
Square profile (S275JO): 100 x 60 x 4 bzw. 90 x 90 x 4 mm
T-profile (S275JO): 90 x 90 x 6 mm
U-profile (S275JO): 90 x 90 x 6 mm
Max. bending radius: 400 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 1,3 r/min
Motor: 3.5 kW
Length: 500 mm
Width: 1200 mm
Height: 850 mm
Weight: 480 kg
2
Metal working and machine toolsSheet metal working machinesPipe-bending machines
Flexion modulus: 10.5 cm³
Standard steel tube: 60 x 3 mm
Gas tube: 2"Gas x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 4 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 4 mm
Brass soft: 60 x 4 mm
Hard copper and aluminium: 64 x 4 mm
Soft copper: 64 x 4 mm
Conduit tube (TAZ): 60 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 10 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,25 / 2,60 r/min
Motor: 1 kW
Length: 595 mm
Width: 363 mm
Height: 900 mm
Weight: 130 kg
Flexion modulus: 10.5 cm³
Standard steel tube: 60 x 3 mm
Gas tube: 2"Gas x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 4 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 4 mm
Brass soft: 60 x 4 mm
Hard copper and aluminium: 64 x 4 mm
Soft copper: 64 x 4 mm
Conduit tube (TAZ): 60 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 10 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,25 / 2,60 r/min
Motor: 1 kW
Length: 595 mm
Width: 363 mm
Height: 900 mm
Weight: 130 kg
Standard steel tube: 60 x 3 mm
Gas tube: 2"Gas x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 4 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 4 mm
Brass soft: 60 x 4 mm
Hard copper and aluminium: 64 x 4 mm
Soft copper: 64 x 4 mm
Conduit tube (TAZ): 60 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 10 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,25 / 2,60 r/min
Motor: 1 kW
Length: 595 mm
Width: 363 mm
Height: 900 mm
Weight: 130 kg
1
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 100
Rolls diameter: 315 mm
Driven rolls: 3
Motor power: 7.5 kW
Speed: 7 m/min
Flat steel vertical position (section / min. diameter): 100x20 mm / 800 mm, 30x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 200x30 mm / 1.200 mm, 160x35 mm / 800 mm, 80x5 mm / 400 mm
Square bar (section / min. diameter): 60x60 mm / 750 mm, 15x15 mm / 400 mm
Round bar (section / min. diameter): Ø 75 mm / 800 mm, Ø 15 mm / 450 mm
Tube (section / min. diameter): Ø 125x2,5 mm / 1.400 mm, Ø 15x1 mm / 450 mm, Ø 4"x6,02 / 1.000 mm, Ø 1/2"x2,77 / 450 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 100x40x4 mm / 1.300 mm, 25x15x2 mm / 450 mm
Form tube square (section / min. diameter): 80x80x5 mm / 1.500 mm, 25x25x2 mm / 450 mm
Angle leg outside (Querschnitt / min. Durchmesser): 100x100x12 mm / 1.000 mm, 40x40x4 mm / 700 mm
Angle leg inside (section / min. diameter): 100x100x10 mm / 1.000 mm, 40x40x4 mm / 550 mm
UPN leg outside (section / min. diameter): UPN 180 / 900 mm, UPN 30 / 400 mm
UPN leg inside (section / min. diameter): UPN 180 / 1.000 mm, UPN 30 / 400 mm
IPN horizontal position (section / min. diameter): IPN 180 / 1.000 mm, IPN 80 / 400 mm
Length: 1465 mm
Width: 2000 mm
Height: 1700 mm
Weight: 4000 kg
Shaft diameter: 100
Rolls diameter: 315 mm
Driven rolls: 3
Motor power: 7.5 kW
Speed: 7 m/min
Flat steel vertical position (section / min. diameter): 100x20 mm / 800 mm, 30x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 200x30 mm / 1.200 mm, 160x35 mm / 800 mm, 80x5 mm / 400 mm
Square bar (section / min. diameter): 60x60 mm / 750 mm, 15x15 mm / 400 mm
Round bar (section / min. diameter): Ø 75 mm / 800 mm, Ø 15 mm / 450 mm
Tube (section / min. diameter): Ø 125x2,5 mm / 1.400 mm, Ø 15x1 mm / 450 mm, Ø 4"x6,02 / 1.000 mm, Ø 1/2"x2,77 / 450 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 100x40x4 mm / 1.300 mm, 25x15x2 mm / 450 mm
Form tube square (section / min. diameter): 80x80x5 mm / 1.500 mm, 25x25x2 mm / 450 mm
Angle leg outside (Querschnitt / min. Durchmesser): 100x100x12 mm / 1.000 mm, 40x40x4 mm / 700 mm
Angle leg inside (section / min. diameter): 100x100x10 mm / 1.000 mm, 40x40x4 mm / 550 mm
UPN leg outside (section / min. diameter): UPN 180 / 900 mm, UPN 30 / 400 mm
UPN leg inside (section / min. diameter): UPN 180 / 1.000 mm, UPN 30 / 400 mm
IPN horizontal position (section / min. diameter): IPN 180 / 1.000 mm, IPN 80 / 400 mm
Length: 1465 mm
Width: 2000 mm
Height: 1700 mm
Weight: 4000 kg
Rolls diameter: 315 mm
Driven rolls: 3
Motor power: 7.5 kW
Speed: 7 m/min
Flat steel vertical position (section / min. diameter): 100x20 mm / 800 mm, 30x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 200x30 mm / 1.200 mm, 160x35 mm / 800 mm, 80x5 mm / 400 mm
Square bar (section / min. diameter): 60x60 mm / 750 mm, 15x15 mm / 400 mm
Round bar (section / min. diameter): Ø 75 mm / 800 mm, Ø 15 mm / 450 mm
Tube (section / min. diameter): Ø 125x2,5 mm / 1.400 mm, Ø 15x1 mm / 450 mm, Ø 4"x6,02 / 1.000 mm, Ø 1/2"x2,77 / 450 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 100x40x4 mm / 1.300 mm, 25x15x2 mm / 450 mm
Form tube square (section / min. diameter): 80x80x5 mm / 1.500 mm, 25x25x2 mm / 450 mm
Angle leg outside (Querschnitt / min. Durchmesser): 100x100x12 mm / 1.000 mm, 40x40x4 mm / 700 mm
Angle leg inside (section / min. diameter): 100x100x10 mm / 1.000 mm, 40x40x4 mm / 550 mm
UPN leg outside (section / min. diameter): UPN 180 / 900 mm, UPN 30 / 400 mm
UPN leg inside (section / min. diameter): UPN 180 / 1.000 mm, UPN 30 / 400 mm
IPN horizontal position (section / min. diameter): IPN 180 / 1.000 mm, IPN 80 / 400 mm
Length: 1465 mm
Width: 2000 mm
Height: 1700 mm
Weight: 4000 kg
1
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 80
Rolls diameter: 260 mm
Driven rolls: 3
Motor power: 7.5 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 80x15 mm / 800 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x8 mm / 400 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 600 mm, Ø 15 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 350 mm, Ø 3"x5,48 / 800 mm, Ø 3/8"x1,65 / 400 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 400 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.400 mm, 40x40x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 40x40x4 mm / 400 mm
Angle leg inside (section / min. diameter): 80x80x8 mm / 1.000 mm, 40x40x4 mm / 400 mm
UPN leg outside (section / min. diameter): UPN 120 / 800 mm
UPN leg inside (section / min. diameter): UPN 120 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 800 mm
Length: 1150 mm
Width: 1200 mm
Height: 1300 mm
Weight: 1600 kg
Shaft diameter: 80
Rolls diameter: 260 mm
Driven rolls: 3
Motor power: 7.5 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 80x15 mm / 800 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x8 mm / 400 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 600 mm, Ø 15 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 350 mm, Ø 3"x5,48 / 800 mm, Ø 3/8"x1,65 / 400 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 400 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.400 mm, 40x40x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 40x40x4 mm / 400 mm
Angle leg inside (section / min. diameter): 80x80x8 mm / 1.000 mm, 40x40x4 mm / 400 mm
UPN leg outside (section / min. diameter): UPN 120 / 800 mm
UPN leg inside (section / min. diameter): UPN 120 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 800 mm
Length: 1150 mm
Width: 1200 mm
Height: 1300 mm
Weight: 1600 kg
Rolls diameter: 260 mm
Driven rolls: 3
Motor power: 7.5 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 80x15 mm / 800 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x8 mm / 400 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 600 mm, Ø 15 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 350 mm, Ø 3"x5,48 / 800 mm, Ø 3/8"x1,65 / 400 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 400 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.400 mm, 40x40x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 40x40x4 mm / 400 mm
Angle leg inside (section / min. diameter): 80x80x8 mm / 1.000 mm, 40x40x4 mm / 400 mm
UPN leg outside (section / min. diameter): UPN 120 / 800 mm
UPN leg inside (section / min. diameter): UPN 120 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 800 mm
Length: 1150 mm
Width: 1200 mm
Height: 1300 mm
Weight: 1600 kg
1
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 80
Rolls diameter: 245 mm
Driven rolls: 3
Motor power: 4 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 100x20 mm / 2000 mm, 80x20 mm / 800 mm, 30x10 / 300
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x5 mm / 300 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 380 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 15 mm / 380 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 380 mm, Ø 3"x5,48 / 800 mm, Ø 1/2"x2,77 / 380 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 350 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.300 mm, 25x25x2 mm / 350 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 700 mm, 30x30x3 mm / 450 mm
UPN leg outside (section / min. diameter): UPN 140 / 1600 mm, UPN 120 / 900 mm, UPN 100 / 800 mm
UPN leg inside (section / min. diameter): UPN 140 / 1.600 mm, UPN 120 / 1000 mm, UPN 100 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 600 mm, IPN 80 / 400 mm
Length: 1450 mm
Width: 1000 mm
Height: 1400 mm
Weight: 1700 kg
Shaft diameter: 80
Rolls diameter: 245 mm
Driven rolls: 3
Motor power: 4 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 100x20 mm / 2000 mm, 80x20 mm / 800 mm, 30x10 / 300
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x5 mm / 300 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 380 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 15 mm / 380 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 380 mm, Ø 3"x5,48 / 800 mm, Ø 1/2"x2,77 / 380 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 350 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.300 mm, 25x25x2 mm / 350 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 700 mm, 30x30x3 mm / 450 mm
UPN leg outside (section / min. diameter): UPN 140 / 1600 mm, UPN 120 / 900 mm, UPN 100 / 800 mm
UPN leg inside (section / min. diameter): UPN 140 / 1.600 mm, UPN 120 / 1000 mm, UPN 100 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 600 mm, IPN 80 / 400 mm
Length: 1450 mm
Width: 1000 mm
Height: 1400 mm
Weight: 1700 kg
Rolls diameter: 245 mm
Driven rolls: 3
Motor power: 4 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 100x20 mm / 2000 mm, 80x20 mm / 800 mm, 30x10 / 300
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x5 mm / 300 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 380 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 15 mm / 380 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 380 mm, Ø 3"x5,48 / 800 mm, Ø 1/2"x2,77 / 380 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 350 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.300 mm, 25x25x2 mm / 350 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 700 mm, 30x30x3 mm / 450 mm
UPN leg outside (section / min. diameter): UPN 140 / 1600 mm, UPN 120 / 900 mm, UPN 100 / 800 mm
UPN leg inside (section / min. diameter): UPN 140 / 1.600 mm, UPN 120 / 1000 mm, UPN 100 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 600 mm, IPN 80 / 400 mm
Length: 1450 mm
Width: 1000 mm
Height: 1400 mm
Weight: 1700 kg
1
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 60
Upper roll diameter: 215 mm
Lower roll diameter: 215 mm
Driven rolls: 3
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 80x20 mm / 1200 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 120x25 mm / 600 mm, 50 x 10 mm / 400 mm
Square bar (section / min. diameter): 50x50 mm / 800 mm, 20x20 mm / 400 mm
Round bar (section / min. diameter): Ø 50 mm / 800 mm, Ø 20 mm / 400 mm
Tube (section / min. diameter): Ø 100x2 mm / 1600 mm, Ø 60x2 mm / 500 mm, 3"x3,2 mm / 1600 mm, 1"x2,6 mm / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm / 1400 mm, 40x20x2 mm / 500 mm
Form tube square (section / min. diameter): 70x3 mm / 1600 mm, 40x2 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 70x70x7 mm / 1000 mm, 40x40x5 mm / 500 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 1200 mm, 40x40x5 mm / 600 mm
Length: 1000 mm
Width: 1400 mm
Height: 1650 mm
Weight: 950 kg
Shaft diameter: 60
Upper roll diameter: 215 mm
Lower roll diameter: 215 mm
Driven rolls: 3
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 80x20 mm / 1200 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 120x25 mm / 600 mm, 50 x 10 mm / 400 mm
Square bar (section / min. diameter): 50x50 mm / 800 mm, 20x20 mm / 400 mm
Round bar (section / min. diameter): Ø 50 mm / 800 mm, Ø 20 mm / 400 mm
Tube (section / min. diameter): Ø 100x2 mm / 1600 mm, Ø 60x2 mm / 500 mm, 3"x3,2 mm / 1600 mm, 1"x2,6 mm / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm / 1400 mm, 40x20x2 mm / 500 mm
Form tube square (section / min. diameter): 70x3 mm / 1600 mm, 40x2 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 70x70x7 mm / 1000 mm, 40x40x5 mm / 500 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 1200 mm, 40x40x5 mm / 600 mm
Length: 1000 mm
Width: 1400 mm
Height: 1650 mm
Weight: 950 kg
Upper roll diameter: 215 mm
Lower roll diameter: 215 mm
Driven rolls: 3
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 80x20 mm / 1200 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 120x25 mm / 600 mm, 50 x 10 mm / 400 mm
Square bar (section / min. diameter): 50x50 mm / 800 mm, 20x20 mm / 400 mm
Round bar (section / min. diameter): Ø 50 mm / 800 mm, Ø 20 mm / 400 mm
Tube (section / min. diameter): Ø 100x2 mm / 1600 mm, Ø 60x2 mm / 500 mm, 3"x3,2 mm / 1600 mm, 1"x2,6 mm / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm / 1400 mm, 40x20x2 mm / 500 mm
Form tube square (section / min. diameter): 70x3 mm / 1600 mm, 40x2 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 70x70x7 mm / 1000 mm, 40x40x5 mm / 500 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 1200 mm, 40x40x5 mm / 600 mm
Length: 1000 mm
Width: 1400 mm
Height: 1650 mm
Weight: 950 kg
6
Metal working and machine toolsSawingCircular saws
Saw blade diameter: 500 mm
Saw blade speed: 2800 rpm
Cutting capacity 0°: Rund 180 mm, Quadratprofil 160 mm, Rechteckprofil 250 x 120 mm
Cutting capacity 45° right: Rund 120 mm, Quadratprofil 120 mm, Rechteckprofil 210 x 100 mm
Width: 1100 mm
Depth: 1450 mm
Height: 1350 mm
Weight: 490 kg
Saw blade diameter: 500 mm
Saw blade speed: 2800 rpm
Cutting capacity 0°: Rund 180 mm, Quadratprofil 160 mm, Rechteckprofil 250 x 120 mm
Cutting capacity 45° right: Rund 120 mm, Quadratprofil 120 mm, Rechteckprofil 210 x 100 mm
Width: 1100 mm
Depth: 1450 mm
Height: 1350 mm
Weight: 490 kg
Saw blade speed: 2800 rpm
Cutting capacity 0°: Rund 180 mm, Quadratprofil 160 mm, Rechteckprofil 250 x 120 mm
Cutting capacity 45° right: Rund 120 mm, Quadratprofil 120 mm, Rechteckprofil 210 x 100 mm
Width: 1100 mm
Depth: 1450 mm
Height: 1350 mm
Weight: 490 kg
5
Metal working and machine toolsSheet metal working machinesSection steel shears
X-axis: 1000 mm
Y-axis: 400 mm
Positioning speed: 12 m/min
Weight: 300 kg
X-axis: 1000 mm
Y-axis: 400 mm
Positioning speed: 12 m/min
Weight: 300 kg
Y-axis: 400 mm
Positioning speed: 12 m/min
Weight: 300 kg
1
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 170 ton
Min. angle steel: 40x40x4 mm
Max. angle steel: 65x65x7 mm
Amount of punching units: 2
Max. diameter at sheet thickness (mild steel): 25/5 bzw- 18/7 mm
Cutting power: 350 to
Motor: 5 kW
Max. pressure: 265 bar
Oiltank: 70 l
Punching power: 170 ton
Min. angle steel: 40x40x4 mm
Max. angle steel: 65x65x7 mm
Amount of punching units: 2
Max. diameter at sheet thickness (mild steel): 25/5 bzw- 18/7 mm
Cutting power: 350 to
Motor: 5 kW
Max. pressure: 265 bar
Oiltank: 70 l
Min. angle steel: 40x40x4 mm
Max. angle steel: 65x65x7 mm
Amount of punching units: 2
Max. diameter at sheet thickness (mild steel): 25/5 bzw- 18/7 mm
Cutting power: 350 to
Motor: 5 kW
Max. pressure: 265 bar
Oiltank: 70 l
1
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 80 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2400 kg
Punching power: 80 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2400 kg
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2400 kg
5
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 80 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2070 kg
Punching power: 80 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2070 kg
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2070 kg
3
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 55 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 / 200x20 mm
Notcher: 10x42x90 mm
Motor: 5 kW
Length: 2100 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1750 kg
Punching power: 55 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 / 200x20 mm
Notcher: 10x42x90 mm
Motor: 5 kW
Length: 2100 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1750 kg
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 / 200x20 mm
Notcher: 10x42x90 mm
Motor: 5 kW
Length: 2100 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1750 kg
1
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 36 ton
Throat depth: 170 mm
Number of stations: 3
Max. diameter at sheet thickness (mild steel): 27x10 mm
Stroke: 15 mm
Strokes: 24 1/min
Flat steel: 350x6 mm
Angle steel: 80x8 mm
Motor: 2 kW
Length: 1100 mm
Width: 800 mm
Height: 1400 mm
Weight: 485 kg
Punching power: 36 ton
Throat depth: 170 mm
Number of stations: 3
Max. diameter at sheet thickness (mild steel): 27x10 mm
Stroke: 15 mm
Strokes: 24 1/min
Flat steel: 350x6 mm
Angle steel: 80x8 mm
Motor: 2 kW
Length: 1100 mm
Width: 800 mm
Height: 1400 mm
Weight: 485 kg
Throat depth: 170 mm
Number of stations: 3
Max. diameter at sheet thickness (mild steel): 27x10 mm
Stroke: 15 mm
Strokes: 24 1/min
Flat steel: 350x6 mm
Angle steel: 80x8 mm
Motor: 2 kW
Length: 1100 mm
Width: 800 mm
Height: 1400 mm
Weight: 485 kg
1
Metal working and machine toolsSheet metal working machinesSection steel shears
X-axis: 6000 mm
Min. flat steel width: 40 mm
Max. flat steel length: 6000 mm
Max. flat steel weight: 600 kg
Min. rest piece length: 180 mm
X-axis: 6000 mm
Min. flat steel width: 40 mm
Max. flat steel length: 6000 mm
Max. flat steel weight: 600 kg
Min. rest piece length: 180 mm
Min. flat steel width: 40 mm
Max. flat steel length: 6000 mm
Max. flat steel weight: 600 kg
Min. rest piece length: 180 mm
3
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 85 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
Punching power: 85 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
2
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 85 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
Punching power: 85 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/15 bzw. 24x24 mm
Flat steel: 450x15 / 450x18 mm
Blade length: 475 mm
Angle steel: 130x130x13 mm
Round / square steel: 45/40 mm
Notcher: 12 mm
Bending unit: 200x12 mm
Motor: 9 kW
Length: 2300 mm
Width: 1200 mm
Height: 2100 mm
Weight: 2400 kg
6
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40x11 mm
Stroke: 32 mm
Flat steel: 350x15 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
Motor: 5.5 kW
Length: 1950 mm
Width: 2000 mm
Height: 1900 mm
Weight: 1900 kg
Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40x11 mm
Stroke: 32 mm
Flat steel: 350x15 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
Motor: 5.5 kW
Length: 1950 mm
Width: 2000 mm
Height: 1900 mm
Weight: 1900 kg
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40x11 mm
Stroke: 32 mm
Flat steel: 350x15 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
Motor: 5.5 kW
Length: 1950 mm
Width: 2000 mm
Height: 1900 mm
Weight: 1900 kg
2
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x11 mm
Flat steel: 350x10 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x11 mm
Flat steel: 350x10 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
Throat depth: 500 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x11 mm
Flat steel: 350x10 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
6
Metal working and machine toolsSheet metal working machinesPunching machines
Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
14
Packaging machineryPacking machines
Product witdh: 45 - 400 mm
Product hight: 1 - 200 mm
Product length: 50 - unlimited mm
Power: max. 60 stroke/min
Transport speed: 8 - 30 m/min
Film thickness: 10 - 80 µm
Temperature range: 170 ° C
Total power: 25 kW
Weight of machine: 2.100 kg
Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m
System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
Product witdh: 45 - 400 mm
Product hight: 1 - 200 mm
Product length: 50 - unlimited mm
Power: max. 60 stroke/min
Transport speed: 8 - 30 m/min
Film thickness: 10 - 80 µm
Temperature range: 170 ° C
Total power: 25 kW
Weight of machine: 2.100 kg
Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m
System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
Product hight: 1 - 200 mm
Product length: 50 - unlimited mm
Power: max. 60 stroke/min
Transport speed: 8 - 30 m/min
Film thickness: 10 - 80 µm
Temperature range: 170 ° C
Total power: 25 kW
Weight of machine: 2.100 kg
Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m
System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
12
Metal working and machine toolsEroding machines
X: 500 mm
Y: 295 mm
Z: 385 mm
C axis: 360 °
Mounting table: 780 x 500 mm
Distance table to quill: 285 - 660 mm
Workpiece weight: 1200 kg
Max. Travel speed X,Y,Z: 600 mm/min
Clamping system: EROWA
C-axis measurement resolution: 0,001 °
Electrode changer: 16 -station
Elektrode changer: Pick-Up
Electrode weight: C-axis 20 kg
Max. single electrode weight: 5 kg
Electrode changer total load: 40 kg
Dielectric cooler: yes
Dielectric filter candles: 3 pcs.
Dielectric filling level: 345 mm
Dielectric fill quantity: 450 l ltr
Dielectric aggregate: separately
Generator: 30 A
Control: EROCOM 200
Fire-extinguishing systems: yes
Total power: 8 kW
Weight of machine: 4400 kg
Space requirement (W x D x H): 2,2 x 3,3 x 2,4 m
Condition: very good
checked by Maho technicians, ready for demonstration under power, instruction / training optionally possible
Accessory: Documentation, no holder available, optional 60 A for an additional charge of EUR 1,500
X: 500 mm
Y: 295 mm
Z: 385 mm
C axis: 360 °
Mounting table: 780 x 500 mm
Distance table to quill: 285 - 660 mm
Workpiece weight: 1200 kg
Max. Travel speed X,Y,Z: 600 mm/min
Clamping system: EROWA
C-axis measurement resolution: 0,001 °
Electrode changer: 16 -station
Elektrode changer: Pick-Up
Electrode weight: C-axis 20 kg
Max. single electrode weight: 5 kg
Electrode changer total load: 40 kg
Dielectric cooler: yes
Dielectric filter candles: 3 pcs.
Dielectric filling level: 345 mm
Dielectric fill quantity: 450 l ltr
Dielectric aggregate: separately
Generator: 30 A
Control: EROCOM 200
Fire-extinguishing systems: yes
Total power: 8 kW
Weight of machine: 4400 kg
Space requirement (W x D x H): 2,2 x 3,3 x 2,4 m
Condition: very good
checked by Maho technicians, ready for demonstration under power, instruction / training optionally possible
Accessory: Documentation, no holder available, optional 60 A for an additional charge of EUR 1,500
Y: 295 mm
Z: 385 mm
C axis: 360 °
Mounting table: 780 x 500 mm
Distance table to quill: 285 - 660 mm
Workpiece weight: 1200 kg
Max. Travel speed X,Y,Z: 600 mm/min
Clamping system: EROWA
C-axis measurement resolution: 0,001 °
Electrode changer: 16 -station
Elektrode changer: Pick-Up
Electrode weight: C-axis 20 kg
Max. single electrode weight: 5 kg
Electrode changer total load: 40 kg
Dielectric cooler: yes
Dielectric filter candles: 3 pcs.
Dielectric filling level: 345 mm
Dielectric fill quantity: 450 l ltr
Dielectric aggregate: separately
Generator: 30 A
Control: EROCOM 200
Fire-extinguishing systems: yes
Total power: 8 kW
Weight of machine: 4400 kg
Space requirement (W x D x H): 2,2 x 3,3 x 2,4 m
Condition: very good
checked by Maho technicians, ready for demonstration under power, instruction / training optionally possible
Accessory: Documentation, no holder available, optional 60 A for an additional charge of EUR 1,500
14
Metal working and machine toolsMilling machinesOther
X: 1050 mm
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
X: 1050 mm
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
5
Woodworking machineryExhaust systemsDeduster
Anschlußdurchmesser: 300 mmSaugleistung: 500 m³/hUnterdruck: paFilterfläche: m²
Anschlußdurchmesser: 300 mm
Saugleistung: 500 m³/h
Unterdruck: pa
Filterfläche: m²
Saugleistung: 500 m³/h
Unterdruck: pa
Filterfläche: m²
9
Metal working and machine toolsSheet metal working machinesRoll forming lines
Blechbreite: 480 mmBlechstärke: 3 mmStationen: 13Gesamtleistungsbedarf: kWMaschinengewicht ca.: 11 tRaumbedarf ca.: 15,x2 m
Blechbreite: 480 mm
Blechstärke: 3 mm
Stationen: 13
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 11 t
Raumbedarf ca.: 15,x2 m
Blechstärke: 3 mm
Stationen: 13
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 11 t
Raumbedarf ca.: 15,x2 m
11
Metal working and machine toolsSheet metal working machinesRoll forming lines
Blechbreite: 400 mmBlechstärke: 3 mmStationen: .Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Blechbreite: 400 mm
Blechstärke: 3 mm
Stationen: .
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Blechstärke: 3 mm
Stationen: .
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
4
Metal working and machine toolsMilling machinesUniversal milling machines
x-Weg: 1600 mmy-Weg: 700 mmz-Weg: 850 mmSteuerung: Heidenhain TNC 407Aufnahme ISO: 50Tischabmessung: 1950 x 650 mmWerkstückspindel-Drehzahlen: 80 - 3000 U7minSpannung: 400 VGesamtleistungsbedarf: 23 kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 1600 mm
y-Weg: 700 mm
z-Weg: 850 mm
Steuerung: Heidenhain TNC 407
Aufnahme ISO: 50
Tischabmessung: 1950 x 650 mm
Werkstückspindel-Drehzahlen: 80 - 3000 U7min
Spannung: 400 V
Gesamtleistungsbedarf: 23 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
y-Weg: 700 mm
z-Weg: 850 mm
Steuerung: Heidenhain TNC 407
Aufnahme ISO: 50
Tischabmessung: 1950 x 650 mm
Werkstückspindel-Drehzahlen: 80 - 3000 U7min
Spannung: 400 V
Gesamtleistungsbedarf: 23 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsMachining centersUniversal machining centers
x-Weg: 600 mmy-Weg: 450 mmz-Weg: 450 mmDrehzahl: 20-6300 U/minSteuerung: PfilipsTyp: CNC 532Spindelaufnahme ISO: 40Pinolenhub: 80 mmVorschub: 1-6000 mm/minEilgang: 6 m/minGesamtleistungsbedarf: 15 KVAMaschinengewicht ca.: 3,6 tRaumbedarf ca.: 3,3x2,1x2,2 m
x-Weg: 600 mm
y-Weg: 450 mm
z-Weg: 450 mm
Drehzahl: 20-6300 U/min
Steuerung: Pfilips
Typ: CNC 532
Spindelaufnahme ISO: 40
Pinolenhub: 80 mm
Vorschub: 1-6000 mm/min
Eilgang: 6 m/min
Gesamtleistungsbedarf: 15 KVA
Maschinengewicht ca.: 3,6 t
Raumbedarf ca.: 3,3x2,1x2,2 m
y-Weg: 450 mm
z-Weg: 450 mm
Drehzahl: 20-6300 U/min
Steuerung: Pfilips
Typ: CNC 532
Spindelaufnahme ISO: 40
Pinolenhub: 80 mm
Vorschub: 1-6000 mm/min
Eilgang: 6 m/min
Gesamtleistungsbedarf: 15 KVA
Maschinengewicht ca.: 3,6 t
Raumbedarf ca.: 3,3x2,1x2,2 m
6
Metal working and machine toolsAccessories and spare partsOther
Diameter: 300mm
Number of cutting edges: . z=
Recording: .
Diameter: 300mm
Number of cutting edges: . z=
Recording: .
Number of cutting edges: . z=
Recording: .
13
Food machinesPackaging machinery
PAL FP8 Rotary filler Serial: FP8MC00024 2017, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.
PAL FP8 Rotary filler Serial: FP8MC00024 2017, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.
14
Food machinesPackaging machinery
PAL FP8 Rotary filler Serial: FP8MC00016 2016, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.
PAL FP8 Rotary filler Serial: FP8MC00016 2016, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.
10
Food machinesMeat processing
Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph
Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph
10
Food machinesMeat processing
Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph
Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph
8
Food machinesMeat processing
Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph
Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph
8
Food machinesMeat processing
Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph
Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph
6
Food machinesMeat processing
Stainless, easycount will make a precise inventory of all hard and soft gelatin capsules and most sizes and shapes of tablets, fill all kinds of containers exactly and automatically, check number of full containers at any time and identify how many pieces have been counted in the last and incomplete containers, 1Ph
Stainless, easycount will make a precise inventory of all hard and soft gelatin capsules and most sizes and shapes of tablets, fill all kinds of containers exactly and automatically, check number of full containers at any time and identify how many pieces have been counted in the last and incomplete containers, 1Ph
7
Food machinesOther
Stainless depositor, Rotary cut off depositing head, adjustable fill size, with foot pedal low level on wheels
Stainless depositor, Rotary cut off depositing head, adjustable fill size, with foot pedal low level on wheels
6
Food machinesOther
Stainless depositor, Rotary cut off sheeting head, adjustable fill size, low level on wheels, with foot pedal
Stainless depositor, Rotary cut off sheeting head, adjustable fill size, low level on wheels, with foot pedal
6
Food machinesOther
Stainless depositor, Rotary cut off depositing head, adjustable fill size, low level on wheels
Stainless depositor, Rotary cut off depositing head, adjustable fill size, low level on wheels
7
Food machinesOther
Stainless depositor, Rotary cut off depositing head, adjustable fill size, low level on wheels, with foot pedal
Stainless depositor, Rotary cut off depositing head, adjustable fill size, low level on wheels, with foot pedal
6
Food machinesOther
Stainless depositor, Rotary cut off depositing head, adjustable fill size, low level on wheels, with foot pedal
Stainless depositor, Rotary cut off depositing head, adjustable fill size, low level on wheels, with foot pedal
6
Food machinesOther
Stainless depositor, adjustable fill size, low level on wheels, with foot pedal
Stainless depositor, adjustable fill size, low level on wheels, with foot pedal
6
Food machinesOther
Stainless depositor, adjustable fill size, low level on wheels, with foot pedal
Stainless depositor, adjustable fill size, low level on wheels, with foot pedal