5
Metal working and machine toolsSheet metal working machinesRound rolling machines
Bending length: 2050 mm
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 280 mm
Lower roll diameter: 280 mm
Lateral roll diameter: 220 mm
Bending speed: 1,5 / 5 m/min
Motor power: 16 kW
Length: 4350 mm
Width: 1700 mm
Height: 1850 mm
Weight: 8550 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 280 mm
Lower roll diameter: 280 mm
Lateral roll diameter: 220 mm
Bending speed: 1,5 / 5 m/min
Motor power: 16 kW
Length: 4350 mm
Width: 1700 mm
Height: 1850 mm
Weight: 8550 kg
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 280 mm
Lower roll diameter: 280 mm
Lateral roll diameter: 220 mm
Bending speed: 1,5 / 5 m/min
Motor power: 16 kW
Length: 4350 mm
Width: 1700 mm
Height: 1850 mm
Weight: 8550 kg
6
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg
1
Metal working and machine toolsSheet metal working machinesPipe-bending machines
Flexion modulus: 6 cm³
Standard steel tube: 48 x 3,5 mm
Gas tube: 1"1/2 x 3.68 mm
Furniture tube: 54 x 1,5 mm
FE35 (for hydraulic tubes): 50 x 4 mm
Stainless steel AISI304-318: 50 x 3 mm
Stainless steel AISI308 (food industry): 40 x 2,5 mm
Brass soft: 60 x 3 mm
Hard copper and aluminium: 64 x 2 mm
Soft copper: 64 x 2 mm
Conduit tube (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 32 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 8 x 48 mm
Square profile (S275JO): 20 x 40 x 3 bzw. 40 x 40 x 3 mm
T-profile (S275JO): 40 x 40 x 5 mm
U-profile (S275JO): 32 x 16 x 5 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 4 r/min
Motor: 1.5 kW
Length: 570 mm
Width: 410 mm
Height: 1000 mm
Weight: 110 kg
Flexion modulus: 6 cm³
Standard steel tube: 48 x 3,5 mm
Gas tube: 1"1/2 x 3.68 mm
Furniture tube: 54 x 1,5 mm
FE35 (for hydraulic tubes): 50 x 4 mm
Stainless steel AISI304-318: 50 x 3 mm
Stainless steel AISI308 (food industry): 40 x 2,5 mm
Brass soft: 60 x 3 mm
Hard copper and aluminium: 64 x 2 mm
Soft copper: 64 x 2 mm
Conduit tube (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 32 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 8 x 48 mm
Square profile (S275JO): 20 x 40 x 3 bzw. 40 x 40 x 3 mm
T-profile (S275JO): 40 x 40 x 5 mm
U-profile (S275JO): 32 x 16 x 5 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 4 r/min
Motor: 1.5 kW
Length: 570 mm
Width: 410 mm
Height: 1000 mm
Weight: 110 kg
Standard steel tube: 48 x 3,5 mm
Gas tube: 1"1/2 x 3.68 mm
Furniture tube: 54 x 1,5 mm
FE35 (for hydraulic tubes): 50 x 4 mm
Stainless steel AISI304-318: 50 x 3 mm
Stainless steel AISI308 (food industry): 40 x 2,5 mm
Brass soft: 60 x 3 mm
Hard copper and aluminium: 64 x 2 mm
Soft copper: 64 x 2 mm
Conduit tube (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 32 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 8 x 48 mm
Square profile (S275JO): 20 x 40 x 3 bzw. 40 x 40 x 3 mm
T-profile (S275JO): 40 x 40 x 5 mm
U-profile (S275JO): 32 x 16 x 5 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 4 r/min
Motor: 1.5 kW
Length: 570 mm
Width: 410 mm
Height: 1000 mm
Weight: 110 kg
14
Food machinesOther
Turbo Rotary Rotary filling line, Serial: R0061192, 2011, Stainless, rotary filling line, consists of Turbo D253P depositor, denester, lid applicator and lid sealer and outfeed conveyor, previously used for filling four pots of sauce in a multipack, tooling dimensions 100mm x 100mm, touch screen controls, 3Ph
Turbo Rotary Rotary filling line, Serial: R0061192, 2011, Stainless, rotary filling line, consists of Turbo D253P depositor, denester, lid applicator and lid sealer and outfeed conveyor, previously used for filling four pots of sauce in a multipack, tooling dimensions 100mm x 100mm, touch screen controls, 3Ph
6
Food machinesOther
Easiweigh Vibratory conveyor, Stainless vibratory conveyor, variable speed, dimple pan, with 50Kg stainless hopper, total length 1100mm, discharge width 270mm, 3Ph
Easiweigh Vibratory conveyor, Stainless vibratory conveyor, variable speed, dimple pan, with 50Kg stainless hopper, total length 1100mm, discharge width 270mm, 3Ph
4
Food machinesMixing machinery
F&M Melting tank, Stainless, 200L melting tank, electrically heated, side bottom discharge, 3Ph
F&M Melting tank, Stainless, 200L melting tank, electrically heated, side bottom discharge, 3Ph
5
Food machinesMixing machinery
F&M Melting tank, Stainless, 200L melting tank, electrically heated, side bottom discharge, 3Ph
F&M Melting tank, Stainless, 200L melting tank, electrically heated, side bottom discharge, 3Ph
7
Metal working and machine toolsLathes
Swing over bed: 330 mm
Distance between centers: 1000 mm
Centre height: 167 mm
Spindle bore: 38 mm
swing over cross slide: 210 mm
Spindle speed steps: 12
Spindle revs: 40 - 2500 rpm
Number of feeds: 16
Longitudinal feed range: 0.03 - 1 mm/r
Metric thread range: 0.2 - 14 mm
Inch thread range: 2 - 56 TPI Tpi
Cross slide travel: 190 mm
Top slide travel: 92 mm
Tailstock quill diameter: 42 mm
Tailstock quill taper: 3 MK
Tailstock travel: 110 mm
Motor power: 2 kW
Length: 1940 mm
Width: 1000 mm
Height: 1550 mm
Weight: 685 kg
Swing over bed: 330 mm
Distance between centers: 1000 mm
Centre height: 167 mm
Spindle bore: 38 mm
swing over cross slide: 210 mm
Spindle speed steps: 12
Spindle revs: 40 - 2500 rpm
Number of feeds: 16
Longitudinal feed range: 0.03 - 1 mm/r
Metric thread range: 0.2 - 14 mm
Inch thread range: 2 - 56 TPI Tpi
Cross slide travel: 190 mm
Top slide travel: 92 mm
Tailstock quill diameter: 42 mm
Tailstock quill taper: 3 MK
Tailstock travel: 110 mm
Motor power: 2 kW
Length: 1940 mm
Width: 1000 mm
Height: 1550 mm
Weight: 685 kg
Distance between centers: 1000 mm
Centre height: 167 mm
Spindle bore: 38 mm
swing over cross slide: 210 mm
Spindle speed steps: 12
Spindle revs: 40 - 2500 rpm
Number of feeds: 16
Longitudinal feed range: 0.03 - 1 mm/r
Metric thread range: 0.2 - 14 mm
Inch thread range: 2 - 56 TPI Tpi
Cross slide travel: 190 mm
Top slide travel: 92 mm
Tailstock quill diameter: 42 mm
Tailstock quill taper: 3 MK
Tailstock travel: 110 mm
Motor power: 2 kW
Length: 1940 mm
Width: 1000 mm
Height: 1550 mm
Weight: 685 kg
6
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 6000 x 41 x 1,3 mm
Band speed continous: 20 - 100 m/min
Cutting capacity 0° round: 560 mm
Cutting capacity 0° square: 560 mm
Cutting capacity 0° flat: 600 x 560 mm
Working height: 810 mm
Hydraulic motor: 2.2 kW
Motor: 5.5 kW
Coolant pump motor: 0.12 kW
Length: 3250 mm
Width: 2200 mm
Height: 2350 mm
Weight: 4500 kg
Saw frame: Double column
Band dimensions: 6000 x 41 x 1,3 mm
Band speed continous: 20 - 100 m/min
Cutting capacity 0° round: 560 mm
Cutting capacity 0° square: 560 mm
Cutting capacity 0° flat: 600 x 560 mm
Working height: 810 mm
Hydraulic motor: 2.2 kW
Motor: 5.5 kW
Coolant pump motor: 0.12 kW
Length: 3250 mm
Width: 2200 mm
Height: 2350 mm
Weight: 4500 kg
Band dimensions: 6000 x 41 x 1,3 mm
Band speed continous: 20 - 100 m/min
Cutting capacity 0° round: 560 mm
Cutting capacity 0° square: 560 mm
Cutting capacity 0° flat: 600 x 560 mm
Working height: 810 mm
Hydraulic motor: 2.2 kW
Motor: 5.5 kW
Coolant pump motor: 0.12 kW
Length: 3250 mm
Width: 2200 mm
Height: 2350 mm
Weight: 4500 kg
9
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 85
Rolls diameter: 247 mm
Driven rolls: 3
Motor power: 7.5 kW
Flat steel vertical position (section / min. diameter): 80x20 mm / 500 mm, 30x10 mm / 350 mm
Flat steel horizontal position (section / min. diameter): 120x30 mm / 650 mm, 50x10 mm / 300 mm
Square bar (section / min. diameter): 50x50 mm / 500 mm, 30x30 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 20 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.300 mm, Ø 20x1 / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x4 mm
Form tube square (section / min. diameter): 70x70x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x8 mm / 1.200 mm, 30x3 mm / 450 mm
Angle leg inside (section / min. diameter): 80x8 mm / 800 mm, 30x3 mm / 450 mm
Length: 1580 mm
Width: 1200 mm
Height: 1410 mm
Weight: 2350 kg
Shaft diameter: 85
Rolls diameter: 247 mm
Driven rolls: 3
Motor power: 7.5 kW
Flat steel vertical position (section / min. diameter): 80x20 mm / 500 mm, 30x10 mm / 350 mm
Flat steel horizontal position (section / min. diameter): 120x30 mm / 650 mm, 50x10 mm / 300 mm
Square bar (section / min. diameter): 50x50 mm / 500 mm, 30x30 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 20 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.300 mm, Ø 20x1 / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x4 mm
Form tube square (section / min. diameter): 70x70x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x8 mm / 1.200 mm, 30x3 mm / 450 mm
Angle leg inside (section / min. diameter): 80x8 mm / 800 mm, 30x3 mm / 450 mm
Length: 1580 mm
Width: 1200 mm
Height: 1410 mm
Weight: 2350 kg
Rolls diameter: 247 mm
Driven rolls: 3
Motor power: 7.5 kW
Flat steel vertical position (section / min. diameter): 80x20 mm / 500 mm, 30x10 mm / 350 mm
Flat steel horizontal position (section / min. diameter): 120x30 mm / 650 mm, 50x10 mm / 300 mm
Square bar (section / min. diameter): 50x50 mm / 500 mm, 30x30 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 20 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.300 mm, Ø 20x1 / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x4 mm
Form tube square (section / min. diameter): 70x70x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x8 mm / 1.200 mm, 30x3 mm / 450 mm
Angle leg inside (section / min. diameter): 80x8 mm / 800 mm, 30x3 mm / 450 mm
Length: 1580 mm
Width: 1200 mm
Height: 1410 mm
Weight: 2350 kg
1
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 120
Rolls diameter: 390 mm
Driven rolls: 3
Motor power: 15 kW
Speed: 2/7,5 m/min
Flat steel vertical position (section / min. diameter): 125x25 mm / 1.200 mm, 30x10 mm / 500 mm
Flat steel horizontal position (section / min. diameter): 200x50 mm / 1.000 mm, 100x10 mm / 500 mm
Square bar (section / min. diameter): 65x65 mm / 750 mm, 20x20 mm / 500 mm
Round bar (section / min. diameter): Ø 80 mm / 850 mm, Ø 20 mm / 500 mm
Tube (section / min. diameter): Ø 160x4 mm / 2.800 mm, Ø 140x3 mm / 1.500 mm, Ø 50x2 mm / 500 mm, Ø 5"x6,35 / 1.500 mm, Ø 3/4"x2,87 / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 120x40x4 mm / 1.800 mm, 30x20x3 mm / 500 mm
Form tube square (section / min. diameter): 90x90x5 mm / 1.800 mm, 30x30x3 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 120x120x12 mm / 1.200 mm, 40x40x4 mm / 600 mm
Angle leg inside (section / min. diameter): 100x100x10 mm / 1.200 mm, 40x40x4 mm / 600 mm
UPN leg outside (section / min. diameter): UPN 220 / 1.000 mm, UPN 180 / 800 mm, UPN 40 / 500 mm
UPN leg inside (section / min. diameter): UPN 220 / 1.200 mm, UPN 180 / 900 mm, UPN 40 / 600 mm
IPN horizontal position (section / min. diameter): IPN 220 / 1.000 mm, IPN 80 / 500 mm
Length: 2000 mm
Width: 1650 mm
Height: 1900 mm
Weight: 4450 kg
Shaft diameter: 120
Rolls diameter: 390 mm
Driven rolls: 3
Motor power: 15 kW
Speed: 2/7,5 m/min
Flat steel vertical position (section / min. diameter): 125x25 mm / 1.200 mm, 30x10 mm / 500 mm
Flat steel horizontal position (section / min. diameter): 200x50 mm / 1.000 mm, 100x10 mm / 500 mm
Square bar (section / min. diameter): 65x65 mm / 750 mm, 20x20 mm / 500 mm
Round bar (section / min. diameter): Ø 80 mm / 850 mm, Ø 20 mm / 500 mm
Tube (section / min. diameter): Ø 160x4 mm / 2.800 mm, Ø 140x3 mm / 1.500 mm, Ø 50x2 mm / 500 mm, Ø 5"x6,35 / 1.500 mm, Ø 3/4"x2,87 / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 120x40x4 mm / 1.800 mm, 30x20x3 mm / 500 mm
Form tube square (section / min. diameter): 90x90x5 mm / 1.800 mm, 30x30x3 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 120x120x12 mm / 1.200 mm, 40x40x4 mm / 600 mm
Angle leg inside (section / min. diameter): 100x100x10 mm / 1.200 mm, 40x40x4 mm / 600 mm
UPN leg outside (section / min. diameter): UPN 220 / 1.000 mm, UPN 180 / 800 mm, UPN 40 / 500 mm
UPN leg inside (section / min. diameter): UPN 220 / 1.200 mm, UPN 180 / 900 mm, UPN 40 / 600 mm
IPN horizontal position (section / min. diameter): IPN 220 / 1.000 mm, IPN 80 / 500 mm
Length: 2000 mm
Width: 1650 mm
Height: 1900 mm
Weight: 4450 kg
Rolls diameter: 390 mm
Driven rolls: 3
Motor power: 15 kW
Speed: 2/7,5 m/min
Flat steel vertical position (section / min. diameter): 125x25 mm / 1.200 mm, 30x10 mm / 500 mm
Flat steel horizontal position (section / min. diameter): 200x50 mm / 1.000 mm, 100x10 mm / 500 mm
Square bar (section / min. diameter): 65x65 mm / 750 mm, 20x20 mm / 500 mm
Round bar (section / min. diameter): Ø 80 mm / 850 mm, Ø 20 mm / 500 mm
Tube (section / min. diameter): Ø 160x4 mm / 2.800 mm, Ø 140x3 mm / 1.500 mm, Ø 50x2 mm / 500 mm, Ø 5"x6,35 / 1.500 mm, Ø 3/4"x2,87 / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 120x40x4 mm / 1.800 mm, 30x20x3 mm / 500 mm
Form tube square (section / min. diameter): 90x90x5 mm / 1.800 mm, 30x30x3 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 120x120x12 mm / 1.200 mm, 40x40x4 mm / 600 mm
Angle leg inside (section / min. diameter): 100x100x10 mm / 1.200 mm, 40x40x4 mm / 600 mm
UPN leg outside (section / min. diameter): UPN 220 / 1.000 mm, UPN 180 / 800 mm, UPN 40 / 500 mm
UPN leg inside (section / min. diameter): UPN 220 / 1.200 mm, UPN 180 / 900 mm, UPN 40 / 600 mm
IPN horizontal position (section / min. diameter): IPN 220 / 1.000 mm, IPN 80 / 500 mm
Length: 2000 mm
Width: 1650 mm
Height: 1900 mm
Weight: 4450 kg
3
Metal working and machine toolsSawingBand saw machines
Schnittdurchmesser: 260 mmSägebandlänge: . mmSchnittbreite: . mmMaschinengewicht ca.: tRaumbedarf ca.: m
Schnittdurchmesser: 260 mm
Sägebandlänge: . mm
Schnittbreite: . mm
Maschinengewicht ca.: t
Raumbedarf ca.: m
Sägebandlänge: . mm
Schnittbreite: . mm
Maschinengewicht ca.: t
Raumbedarf ca.: m
11
Food machinesOther
Guttridge Screw conveyor, 2019, Stainless screw conveyor, elevates from 400mm to 900mm, screw diameter 100mm, 1.1Kw motor, discharges onto a mettler toledo platform scale, weight up to 50Kg, mobile, 3Ph
Guttridge Screw conveyor, 2019, Stainless screw conveyor, elevates from 400mm to 900mm, screw diameter 100mm, 1.1Kw motor, discharges onto a mettler toledo platform scale, weight up to 50Kg, mobile, 3Ph
5
Food machinesMixing machinery
NNP 200L cooking vessel, Stainless, capacity 200L, electrically heated jacket, mobile, side discharge, 3Ph
NNP 200L cooking vessel, Stainless, capacity 200L, electrically heated jacket, mobile, side discharge, 3Ph
10
Packaging machineryPacking machines
Dimensions of the bars: Ø 35 mm - 2.200
Set: 2 x 5
Space requirement (W x D x H): in box 1,45 x 2,38 x 0,38 m
Dimensions of the bars: Ø 35 mm - 2.200
Set: 2 x 5
Space requirement (W x D x H): in box 1,45 x 2,38 x 0,38 m
Set: 2 x 5
Space requirement (W x D x H): in box 1,45 x 2,38 x 0,38 m
2
Metal working and machine toolsLathes
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 75 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 25-100, 100-400, 500-2000 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2800 kg
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 75 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 25-100, 100-400, 500-2000 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2800 kg
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 75 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 25-100, 100-400, 500-2000 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2800 kg
2
Metal working and machine toolsLathes
Swing over bed: 325 mm
Distance between centers: 750 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Revs continuous variable in gear steps: 2
Revs continuous variable: 85-405, 470-2200 rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: Array
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Length: 2150 mm
Width: 950 mm
Height: 1350 mm
Weight: 770 kg
Swing over bed: 325 mm
Distance between centers: 750 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Revs continuous variable in gear steps: 2
Revs continuous variable: 85-405, 470-2200 rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: Array
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Length: 2150 mm
Width: 950 mm
Height: 1350 mm
Weight: 770 kg
Distance between centers: 750 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Revs continuous variable in gear steps: 2
Revs continuous variable: 85-405, 470-2200 rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: Array
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Length: 2150 mm
Width: 950 mm
Height: 1350 mm
Weight: 770 kg
1
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 165 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/30 bzw. 34/34 mm
Stroke: 110 mm
Strokes: 31 1/min
Flat steel: 750x20 / 400x30 mm
Angle steel: 205x205x18 mm
Round / square steel: 60 mm
Notcher: 16x58x110 mm
Motor: 15 kW
Length: 2950 mm
Width: 1600 mm
Height: 2200 mm
Weight: 6300 kg
Punching power: 165 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/30 bzw. 34/34 mm
Stroke: 110 mm
Strokes: 31 1/min
Flat steel: 750x20 / 400x30 mm
Angle steel: 205x205x18 mm
Round / square steel: 60 mm
Notcher: 16x58x110 mm
Motor: 15 kW
Length: 2950 mm
Width: 1600 mm
Height: 2200 mm
Weight: 6300 kg
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/30 bzw. 34/34 mm
Stroke: 110 mm
Strokes: 31 1/min
Flat steel: 750x20 / 400x30 mm
Angle steel: 205x205x18 mm
Round / square steel: 60 mm
Notcher: 16x58x110 mm
Motor: 15 kW
Length: 2950 mm
Width: 1600 mm
Height: 2200 mm
Weight: 6300 kg
11
Metal working and machine toolsPressesStraightening presses
Druck: 400 tAusladung: 1140 mmHub: 600 mmTischfläche: 2000x1000 mmPlatte: 4000x1000x300 mmStößelabmessungen: 2000x1040 mmZylinder: 300 mmEinbauhöhe: 650Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: 3,9x4x4,2 m
Druck: 400 t
Ausladung: 1140 mm
Hub: 600 mm
Tischfläche: 2000x1000 mm
Platte: 4000x1000x300 mm
Stößelabmessungen: 2000x1040 mm
Zylinder: 300 mm
Einbauhöhe: 650
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: 3,9x4x4,2 m
Ausladung: 1140 mm
Hub: 600 mm
Tischfläche: 2000x1000 mm
Platte: 4000x1000x300 mm
Stößelabmessungen: 2000x1040 mm
Zylinder: 300 mm
Einbauhöhe: 650
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: 3,9x4x4,2 m
5
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 40 to
Bending length: 1250 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 1750 mm
Width: 950 mm
Height: 1900 mm
Weight: 1640 kg
pressing capacity: 40 to
Bending length: 1250 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 1750 mm
Width: 950 mm
Height: 1900 mm
Weight: 1640 kg
Bending length: 1250 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 1750 mm
Width: 950 mm
Height: 1900 mm
Weight: 1640 kg
4
Food machinesMeat processing
Advecto Handwash station, Stainless handwash station, knee operated, with sink
Advecto Handwash station, Stainless handwash station, knee operated, with sink
6
Food machinesMeat processing
Syspal Stainless sinks, a variety of stainless sinks, freestanding, single station and two station with knee operated
Syspal Stainless sinks, a variety of stainless sinks, freestanding, single station and two station with knee operated
5
Food machinesCooling technologyRefrigerators
LEC BC9097ST Bottle cooler, Stainless bottle cooler, refrigerated cabinet, twin door, 1Ph
LEC BC9097ST Bottle cooler, Stainless bottle cooler, refrigerated cabinet, twin door, 1Ph
4
Food machinesAccessories and spare parts
Accurex RXT30S Scales, Stainless platform scale, 5g - 30Kg, 1Ph
Accurex RXT30S Scales, Stainless platform scale, 5g - 30Kg, 1Ph
4
Food machinesAccessories and spare parts
Adam ABK32 scales, Stainless platform scale, 0.001Kg - 32Kgs, 1Ph, three in stock
Adam ABK32 scales, Stainless platform scale, 0.001Kg - 32Kgs, 1Ph, three in stock
4
Food machinesAccessories and spare parts
Gram K3-F2-60 scales, Stainless platform scale, 10g to 60kg, 1Ph, two in stock
Gram K3-F2-60 scales, Stainless platform scale, 10g to 60kg, 1Ph, two in stock
1
Metal working and machine toolsPressesEccentric presses
pressing capacity: 110 to
Table length: 900 mm
Table width: 540 mm
Hole in table: 180 mm
Stroke: 14 - 114 mm
Strokes: 60 1/min
Ram: 490x325 mm
Ram adjustment: 90 mm
Throat depth: 280 mm
Motor: 7.5 kW
Length: 1870 mm
Width: 1320 mm
Height: 2800 mm
Weight: 5600 kg
pressing capacity: 110 to
Table length: 900 mm
Table width: 540 mm
Hole in table: 180 mm
Stroke: 14 - 114 mm
Strokes: 60 1/min
Ram: 490x325 mm
Ram adjustment: 90 mm
Throat depth: 280 mm
Motor: 7.5 kW
Length: 1870 mm
Width: 1320 mm
Height: 2800 mm
Weight: 5600 kg
Table length: 900 mm
Table width: 540 mm
Hole in table: 180 mm
Stroke: 14 - 114 mm
Strokes: 60 1/min
Ram: 490x325 mm
Ram adjustment: 90 mm
Throat depth: 280 mm
Motor: 7.5 kW
Length: 1870 mm
Width: 1320 mm
Height: 2800 mm
Weight: 5600 kg
1
Metal working and machine toolsSheet metal working machinesSection steel shears
Punching power: 45 ton
Throat depth: 175 mm
Number of stations: 4
Max. diameter at sheet thickness (mild steel): 27 x 12 mm
Stroke: 15 mm
Strokes: 16 1/min
Flat steel: 300x10 / 200x13 mm
Angle steel: 80x80x8 mm
Notcher: 7 mm
Motor: 2.2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
Punching power: 45 ton
Throat depth: 175 mm
Number of stations: 4
Max. diameter at sheet thickness (mild steel): 27 x 12 mm
Stroke: 15 mm
Strokes: 16 1/min
Flat steel: 300x10 / 200x13 mm
Angle steel: 80x80x8 mm
Notcher: 7 mm
Motor: 2.2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
Throat depth: 175 mm
Number of stations: 4
Max. diameter at sheet thickness (mild steel): 27 x 12 mm
Stroke: 15 mm
Strokes: 16 1/min
Flat steel: 300x10 / 200x13 mm
Angle steel: 80x80x8 mm
Notcher: 7 mm
Motor: 2.2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
3
Metal working and machine toolsAccessories and spare partsOther
Diameter: 200 mm
Weight of machine: 20 kg
hight 105 mm, mounting via 4 x M12, hole distance 95 mm, outlet 55 mm
Diameter: 200 mm
Weight of machine: 20 kg
hight 105 mm, mounting via 4 x M12, hole distance 95 mm, outlet 55 mm
Weight of machine: 20 kg
hight 105 mm, mounting via 4 x M12, hole distance 95 mm, outlet 55 mm
3
Packaging machineryPacking machines
Working height: 820 mm
Weight of machine: 890 kg
Space requirement (W x D x H): 2,0 x 1,0 x 0,82 m
Condition: the plate is top
nice solid surface plate, welding table
Working height: 820 mm
Weight of machine: 890 kg
Space requirement (W x D x H): 2,0 x 1,0 x 0,82 m
Condition: the plate is top
nice solid surface plate, welding table
Weight of machine: 890 kg
Space requirement (W x D x H): 2,0 x 1,0 x 0,82 m
Condition: the plate is top
nice solid surface plate, welding table
8
Woodworking machinerySawingVertical band saws
Troath: 500 mm
Table size: 700 x 700 mm
Workpiece hight: 300 mm
Tape speed: 19 - 2.900 m/min m/min.
Total power: 1,1 kW
Weight of machine: 920 kg
Space requirement (W x D x H): 1,2 x 1,0 x 2,2 m
Table can be swiveled in all directions, 3 gear levels/speeds - in the individual levels, controllable speed setting
Accessory: Work light, belt welding device
Troath: 500 mm
Table size: 700 x 700 mm
Workpiece hight: 300 mm
Tape speed: 19 - 2.900 m/min m/min.
Total power: 1,1 kW
Weight of machine: 920 kg
Space requirement (W x D x H): 1,2 x 1,0 x 2,2 m
Table can be swiveled in all directions, 3 gear levels/speeds - in the individual levels, controllable speed setting
Accessory: Work light, belt welding device
Table size: 700 x 700 mm
Workpiece hight: 300 mm
Tape speed: 19 - 2.900 m/min m/min.
Total power: 1,1 kW
Weight of machine: 920 kg
Space requirement (W x D x H): 1,2 x 1,0 x 2,2 m
Table can be swiveled in all directions, 3 gear levels/speeds - in the individual levels, controllable speed setting
Accessory: Work light, belt welding device
11
Packaging machineryPacking machines
Processing diameter: 320 mm
Coolant system: yes
Mitre cut: 45 -/+ degree
Saw blade dimensions: 4860 x 34 x 1,1 mm
Stop: with ruler 450 mm
Total power: 2,8 kW
Weight of machine: 1500 kg
Space requirement (W x D x H): 2,95 x 1,6 x 1,8 m
Condition: good
on wheels, column-guided, good condition, ready to use
Accessory: 4 band saw blades
Processing diameter: 320 mm
Coolant system: yes
Mitre cut: 45 -/+ degree
Saw blade dimensions: 4860 x 34 x 1,1 mm
Stop: with ruler 450 mm
Total power: 2,8 kW
Weight of machine: 1500 kg
Space requirement (W x D x H): 2,95 x 1,6 x 1,8 m
Condition: good
on wheels, column-guided, good condition, ready to use
Accessory: 4 band saw blades
Coolant system: yes
Mitre cut: 45 -/+ degree
Saw blade dimensions: 4860 x 34 x 1,1 mm
Stop: with ruler 450 mm
Total power: 2,8 kW
Weight of machine: 1500 kg
Space requirement (W x D x H): 2,95 x 1,6 x 1,8 m
Condition: good
on wheels, column-guided, good condition, ready to use
Accessory: 4 band saw blades
12
Metal working and machine toolsMilling machinesOther
X: 750 mm
Y: 500 mm
Z: 500 mm
Table size: 490 x 950 mm
Speed range: 9.000 rpm
Taper fixture: SK 40
Internal coolant supply: yes
Tool changer: 20 -station
Control: Heidenhain 426 / 430 CB
Control on: 36299 h
Program run: 16867 h
Total power: 25 kW
Condition: good, ready for immediate use
Weight of machine: 4000 kg
Space requirement (W x D x H): 2,7 x 2,2 x 2,4 m
Coolant pan, no chip conveyor
Accessory: Documentation, 9 SK40 recordings
X: 750 mm
Y: 500 mm
Z: 500 mm
Table size: 490 x 950 mm
Speed range: 9.000 rpm
Taper fixture: SK 40
Internal coolant supply: yes
Tool changer: 20 -station
Control: Heidenhain 426 / 430 CB
Control on: 36299 h
Program run: 16867 h
Total power: 25 kW
Condition: good, ready for immediate use
Weight of machine: 4000 kg
Space requirement (W x D x H): 2,7 x 2,2 x 2,4 m
Coolant pan, no chip conveyor
Accessory: Documentation, 9 SK40 recordings
Y: 500 mm
Z: 500 mm
Table size: 490 x 950 mm
Speed range: 9.000 rpm
Taper fixture: SK 40
Internal coolant supply: yes
Tool changer: 20 -station
Control: Heidenhain 426 / 430 CB
Control on: 36299 h
Program run: 16867 h
Total power: 25 kW
Condition: good, ready for immediate use
Weight of machine: 4000 kg
Space requirement (W x D x H): 2,7 x 2,2 x 2,4 m
Coolant pan, no chip conveyor
Accessory: Documentation, 9 SK40 recordings
4
Packaging machineryPacking machines
Trunk length: 3
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m
Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.
Accessory: options: more trunk supports
Trunk length: 3
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m
Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.
Accessory: options: more trunk supports
Trunk diameter: depending on the existing sword length
Saw options: electric saw, chainsaw
Trunk supports: 2 piece
Material: steel
Surface: powder coated
Weight of machine: 30 kg
Space requirement (W x D x H): 1,2 x 3,0 x 1,4 m
Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.
Accessory: options: more trunk supports
10
Food machinesBakery-, pastry equipmentCutting machines
Grote 713 Slicer, Stainless slicer, suitable for meat and cheese, this machine performs a variety of slicing applications, including bulk slicing, stacking and shingling into portions, Up to 90 strokes per min per lane, stainless mesh outfeed, 1Ph
Grote 713 Slicer, Stainless slicer, suitable for meat and cheese, this machine performs a variety of slicing applications, including bulk slicing, stacking and shingling into portions, Up to 90 strokes per min per lane, stainless mesh outfeed, 1Ph
7
Food machinesOther
Cox and plant, vibratory conveyor Stainless vibratory conveyor, conveyor dimensions 1700mm L x 750mm W, comes with a 20mm diameter mesh that can be removed, mobile, 1Ph
Cox and plant, vibratory conveyor Stainless vibratory conveyor, conveyor dimensions 1700mm L x 750mm W, comes with a 20mm diameter mesh that can be removed, mobile, 1Ph
7
Food machinesAccessories and spare parts
Toyota 8FGF18 forklift truck, Serial: 10637 2013, forklift truck, capacity 1800Kgs, lifts to 4700mm, gas
Toyota 8FGF18 forklift truck, Serial: 10637 2013, forklift truck, capacity 1800Kgs, lifts to 4700mm, gas
5
Food machinesCooling technologyRefrigerators
Polar G592-04 Refrigerator, Stainless fridge, adjustable temp control, mobile, 1Ph
Polar G592-04 Refrigerator, Stainless fridge, adjustable temp control, mobile, 1Ph
4
Food machinesOther
EKU CI750 Induction hob, 2016, Stainless, induction hob, two station, adjustable temp controls
EKU CI750 Induction hob, 2016, Stainless, induction hob, two station, adjustable temp controls
6
Food machinesOther
Retigo O611ic Combi oven, 2016, RP series, Stainless combi oven, electric, 10Kw, with steam, with 7 trays, adjustable timer and temperature controls, mounted on tray rack, 1Ph
Retigo O611ic Combi oven, 2016, RP series, Stainless combi oven, electric, 10Kw, with steam, with 7 trays, adjustable timer and temperature controls, mounted on tray rack, 1Ph
5
Food machinesMixing machinery
Cleveland Bratt pan, Stainless, tilting, gas heated bratt pan, capacity 130L, 1Ph
Cleveland Bratt pan, Stainless, tilting, gas heated bratt pan, capacity 130L, 1Ph
5
Food machinesMixing machinery
Cleveland Bratt pan, Stainless, tilting, gas heated bratt pan, capacity 130L, 1Ph
Cleveland Bratt pan, Stainless, tilting, gas heated bratt pan, capacity 130L, 1Ph
5
Food machinesOther
Retigo O2021ic Combi oven, 2016, RP series, Stainless combi oven, electric, 59Kw, with steam, with trolley for 20trays, adjustable timer and temperature controls, with two trolleys, 1Ph
Retigo O2021ic Combi oven, 2016, RP series, Stainless combi oven, electric, 59Kw, with steam, with trolley for 20trays, adjustable timer and temperature controls, with two trolleys, 1Ph
6
Food machinesOther
Retigo O2021ic Combi oven, 2016, RP series, Stainless combi oven, electric, 59Kw, with steam, with trolley for 20trays, adjustable timer and temperature controls, with two trolleys, 1Ph
Retigo O2021ic Combi oven, 2016, RP series, Stainless combi oven, electric, 59Kw, with steam, with trolley for 20trays, adjustable timer and temperature controls, with two trolleys, 1Ph
6
Food machinesMixing machinery
Cleveland KGL40 kettle, stainless, 40gallon, jacketed cooking kettle, adjustable temperature controls, steam jacketed, 1Ph
Cleveland KGL40 kettle, stainless, 40gallon, jacketed cooking kettle, adjustable temperature controls, steam jacketed, 1Ph
5
Food machinesMeat processing
AWE Boot scrubber 2021, Stainless boot scrubbing station, 1Ph
AWE Boot scrubber 2021, Stainless boot scrubbing station, 1Ph
7
Food machinesPackaging machinery
Haloila CobraX Pallet wrapper, 2016, Pallet wrapper, rotating arm, wraps up to 2300mm, 1Ph
Haloila CobraX Pallet wrapper, 2016, Pallet wrapper, rotating arm, wraps up to 2300mm, 1Ph
12
Food machinesMeat processing
Fitzpatrick L1A Fitzmill, 2006, stainless, duel sided knives, 150mm rounded cutting chamber, for wet and dry produce, two boxes of spare parts, mounted on mobile frame
Fitzpatrick L1A Fitzmill, 2006, stainless, duel sided knives, 150mm rounded cutting chamber, for wet and dry produce, two boxes of spare parts, mounted on mobile frame
10
Food machinesBakery-, pastry equipmentMixers
Dowitec MW120-SPT Agitator drum, agitator drum with vibratory conveyor discharge, 120L agitation drum, screw outfeed onto stainless vibratory conveyor, downstream whisk distributes product evenly across the outfeed conveyor
Dowitec MW120-SPT Agitator drum, agitator drum with vibratory conveyor discharge, 120L agitation drum, screw outfeed onto stainless vibratory conveyor, downstream whisk distributes product evenly across the outfeed conveyor
5
Food machinesPackaging machinery
Siat Case taper, top and bottom case taper, bottom belts, max box width 450mm, max box height 550mm, mobile, 3Ph
Siat Case taper, top and bottom case taper, bottom belts, max box width 450mm, max box height 550mm, mobile, 3Ph