Drehdurchmesser über Bett: 540 mm
Spitzenweite: 1500 mm
Spindelbohrung: 85 mm
Drehdurchmesser über Querschlitten: 310 mm
Bettbreite: 350 mm
Spindelaufnahme: D1-8
Spindelkegel: 1/20 MK
Drehzahlstufen: 3
Spindeldrehzahl: 27 - 2250 1/min
Quervorschub: 5000 mm/min
Eilgang Z-Achse: 8000 mm/min
Verstellbereich Querschlitten: 280 mm
Reitstock Pinolendurchmesser: 75 mm
Reitstock Aufnahme: 5 MK
Reitstock Pinolenweg: 190 mm
Motorleistung: 9 / 13,5 (S1 / S6 40%) kW
Genauigkeitsstandard: ISO3655
Länge: 3340 mm
Breite: 1905 mm
Höhe: 2235 mm
Gewicht: 3400 kg

Swing over bed: 460 mm
Distance between centers: 1000 mm
Spindle bore: 56 mm
swing over cross slide: 230 mm
Width of bed: 350 mm
Spindel nose type: D1-6
Spindle taper: 1/20 M
Spindle speed steps: 3
Spindle revs: 33 - 3100 rpm
Cross feed: 5000 m/min
Rapid traverse Z-axis: 8000 mm/min
Cross slide travel: 280 mm
Tailstock quill diameter: 75 mm
Tailstock quill taper: 5 MK
Tailstock travel: 190 mm
Motor power: 9 / 13,5 (S1/S6-40%) kW
Accuracy standard: ISO3655
Length: 2840 mm
Width: 1905 mm
Height: 2235 mm
Weight: 2900 kg

Cutting length: 2050 mm
Max. thickness - mild steel: 3 mm
Max. thickness - stainless steel: 1.5 mm
Strokes: 28 1/min
Cutting angle: 2 °
Back gauge: 600 mm
Motor power: 4 kW
Table height: 830 mm
Length: 2520 mm
Width: 1550 mm
Total width with support arm und protection fence: 2150 mm
Height: 1200 mm
Weight: 1450 kg

Ref. no.: 18627
Manufacturer: BATTENFELD
Year of construction: 2007

Clamping unit
Clamping force: 100 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 250 mm

Injection unit
Screw diameter: 22 + 14 mm
Injection volume: 47 +13 cm³
Shot weight: 45 + 12 g
Injection pressure: 2860 + 3000 bar

Measurements and weight
Dimensions: 4,1 x 1,5 x 2,4 m
Machine weight: 5000 kg

Further information:
2K Co-Injection Moulding Machine

This machine from the prestigious Austrian manufacturer Battenfeld is a 2007 horizontal injection moulding machine with 100 tonnes clamping force and a special Co-Injection (Sandwich Injection) configuration.

How Does Co-Injection Work?

The two injection units do not operate independently — they meet inside a combined nozzle. First, Unit A injects: the first material adheres to the mould wall and forms the outer skin. Then Unit B follows: the second material flows into the core of the first, pushing it forward. The result is a part with an outer skin of Material 1 and a core of Material 2. If both materials are injected simultaneously or overlapping, a decorative marble or blended colour effect is achieved. The entire process takes place in a single cycle with a standard mould — no expensive rotary platen tooling is required.

In the current production of this machine, Unit A feeds green and Unit B feeds yellow material of the same plastic type, both injected simultaneously through a single combined nozzle into the mould. As the green and yellow materials flow side by side and into each other, a natural marbled colour effect is created on the part surface. Permanent and visually appealing coloured surfaces are produced in a single cycle — no labels or post-painting required.

Ref. no.: 18617
Manufacturer: DEMAG
Year of construction: 2007

Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 51 cm³
Shot weight: 45 g
Injection pressure: 2000 bar

Measurements and weight
Dimensions: 4,3 x 1,3 x 2,3 m
Machine weight: 4750 kg

Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision

The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.

Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor

The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.

5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.

NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Ref. no.: 18616
Manufacturer: DEMAG
Year of construction: 2007

Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 51 cm³
Shot weight: 45 g
Injection pressure: 2000 bar

Measurements and weight
Dimensions: 4,3 x 1,3 x 2,3 m
Machine weight: 4750 kg

Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.

Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.

5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.

NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Ref. no.: 18615
Manufacturer: DEMAG
Year of construction: 2007

Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 51 cm³
Shot weight: 45 g
Injection pressure: 2000 bar

Measurements and weight
Dimensions: 4,3 x 1,3 x 2,3 m
Machine weight: 4750 kg

Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.

Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.

5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.

NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Ref. no.: 18614
Manufacturer: DEMAG
Year of construction: 2006

Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm

Injection unit
Screw diameter: 18 mm
Injection volume: 26 cm³
Shot weight: 23 g
Injection pressure: 2800 bar

Measurements and weight
Dimensions: 4,3 x1,3 x 2,3 m
Machine weight: 4750 kg

Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.

Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.

5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.

NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Ref. no.: 18613
Manufacturer: DEMAG
Year of construction: 2006

Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm

Injection unit
Screw diameter: 30 mm
Injection volume: 74 cm³
Shot weight: 60 g
Injection pressure: 1390 bar

Measurements and weight
Dimensions: 4,3 x1,3 x 2,3 m
Machine weight: 4750 kg

Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.

Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.

5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.

NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Ref. no.: 18612
Manufacturer: DEMAG
Year of construction: 2006

Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm

Injection unit
Screw diameter: 22 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 4,3 x1,3 x 2,3 m
Machine weight: 4750 kg

Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.

Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.

5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.

NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Ref. no.: 18138
Manufacturer: DEMAG
Year of construction: 2006

Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm

Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar

Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg

Ref. no.: 18625
Manufacturer: WITTMANN BATTENFELD
Year of construction: 2011

Clamping unit
Clamping force: 110 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 450 mm
Platen size (h x v): 680 x 663 mm

Injection unit
Screw diameter: 30 mm
Injection volume: 88 cm³
Shot weight: 80 g
Injection pressure: 1471 bar

Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 4600 kg

Further information:
Wittmann Battenfeld EcoPower series represents high-efficiency all-electric injection moulding technology designed for precision production and stable processing performance.

All major machine movements are driven by servo electric motors. Injection, dosing, clamping and ejector movements are performed completely electrically, ensuring extremely precise motion control, excellent repeatability and stable production quality.

Compared to conventional hydraulic injection moulding machines, the EcoPower series can achieve approximately 60% up to 80% energy savings depending on the application. In addition, the machines offer lower heat generation, quiet operation and a cleaner production environment.

The integrated UNILOG B6 / B6P control system is well known for its user-friendly operation, reliable process management and stable long-term performance. Combined with high dynamic servo technology and low-vibration operation, the EcoPower platform is especially suitable for technical plastic parts, electronic components, automotive applications and medical production.

Today, the Wittmann Battenfeld EcoPower series is still considered one of the most reliable and energy-efficient all-electric injection moulding machine platforms on the market.

Ref. no.: 18624
Manufacturer: WITTMANN BATTENFELD
Year of construction: 2010

Clamping unit
Clamping force: 180 ton
Opening stroke: 480 mm
Distance between tie bars: 570 x 520 mm
Mould height min.: 225 mm
Mould height max.: 550 mm
Platen size (h x v): 810 x 805 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 163 g
Injection pressure: 2083 bar

Measurements and weight
Dimensions: 5,2 x 1,6 x 2,2 m
Machine weight: 6800 kg

Further information:
Die Wittmann Battenfeld EcoPower Serie steht für hocheffiziente vollelektrische Spritzgießtechnologie, entwickelt für präzise Produktionsprozesse und stabile Fertigungsbedingungen.

Alle Hauptbewegungen der Maschine werden durch Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Schließen und Auswerfen erfolgen vollständig elektrisch und ermöglichen dadurch eine äußerst präzise Bewegungssteuerung, hohe Wiederholgenauigkeit und stabile Produktionsqualität.

Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen kann die EcoPower Serie – abhängig von der Anwendung – Energieeinsparungen von ca. 60% bis 80% erreichen. Zusätzlich bieten die Maschinen eine reduzierte Wärmeentwicklung, einen ruhigen Lauf sowie eine saubere Produktionsumgebung.

Die integrierte UNILOG B6 / B6P Steuerung ist bekannt für ihre benutzerfreundliche Bedienung, zuverlässige Prozesskontrolle und stabile Langzeitleistung. In Kombination mit der hochdynamischen Servotechnologie und dem vibrationsarmen Betrieb eignet sich die EcoPower Plattform besonders für technische Kunststoffteile, elektronische Komponenten, Automobilanwendungen und medizinische Produktionen.

Die Wittmann Battenfeld EcoPower Serie zählt auch heute noch zu den zuverlässigsten und energieeffizientesten vollelektrischen Spritzgießmaschinenplattformen auf dem Markt.

Ref. no.: 18623
Manufacturer: WITTMANN BATTENFELD
Year of construction: 2010

Clamping unit
Clamping force: 180 ton
Opening stroke: 480 mm
Distance between tie bars: 570 x 520 mm
Mould height min.: 225 mm
Mould height max.: 550 mm
Platen size (h x v): 810 x 805 mm

Injection unit
Screw diameter: 30 mm
Injection volume: 124 cm³
Shot weight: 120 g
Injection pressure: 2823 bar

Measurements and weight
Dimensions: 4,8 x 1,6 x 2,2 m
Machine weight: 6800 kg

Further information:
Die Wittmann Battenfeld EcoPower Serie steht für hocheffiziente vollelektrische Spritzgießtechnologie, entwickelt für präzise Produktionsprozesse und stabile Fertigungsbedingungen.

Alle Hauptbewegungen der Maschine werden durch Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Schließen und Auswerfen erfolgen vollständig elektrisch und ermöglichen dadurch eine äußerst präzise Bewegungssteuerung, hohe Wiederholgenauigkeit und stabile Produktionsqualität.

Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen kann die EcoPower Serie – abhängig von der Anwendung – Energieeinsparungen von ca. 60% bis 80% erreichen. Zusätzlich bieten die Maschinen eine reduzierte Wärmeentwicklung, einen ruhigen Lauf sowie eine saubere Produktionsumgebung.

Die integrierte UNILOG B6 / B6P Steuerung ist bekannt für ihre benutzerfreundliche Bedienung, zuverlässige Prozesskontrolle und stabile Langzeitleistung. In Kombination mit der hochdynamischen Servotechnologie und dem vibrationsarmen Betrieb eignet sich die EcoPower Plattform besonders für technische Kunststoffteile, elektronische Komponenten, Automobilanwendungen und medizinische Produktionen.

Die Wittmann Battenfeld EcoPower Serie zählt auch heute noch zu den zuverlässigsten und energieeffizientesten vollelektrischen Spritzgießmaschinenplattformen auf dem Markt.

Ref. no.: 18635
Manufacturer: SEPRO
Year of construction: 2022

Further information:
SEPRO S5-25 med – 3-Axis Servo Linear Robot

* Manufacturer: SEPRO Robotique S.A.S. (France)
* Model: S5-25 med
* Year of manufacture: 2022
* Serial number: R015336-02
* Condition: Very good and clean condition
* Application: Injection moulding automation / part removal robot
Technical Specifications

Description Value
Robot type 3-axis servo linear robot
X-axis (Traverse) 2000 mm
Y-axis 700 mm
Vertical stroke 1200 mm
Rotation No rotation
Payload class approx. 10 kg
Control system SEPRO Visual 2
Voltage 3x400V – 3x480V
Frequency 50/60 Hz
Max. power 1.5 kVA
Weight approx. 100 kg
Series S5 med

Description
The SEPRO S5-25 med is a high-performance 3-axis servo linear robot designed for automated part removal and handling applications on injection moulding machines.

The robot is in very good technical and visual condition and comes from a clean production environment. The “med” version is particularly suitable for medical and clean-room applications.

The robot has only been used for testing and training purposes.

The system offers:
* fast and precise movements
* reliable servo technology
* compact and stable construction
* modern SEPRO Visual control system
* ideal integration into injection moulding automation systems

Ref. no.: 18592
Manufacturer: SEALPAC
Year of construction: 2013

Further information:
TECHNICAL DATA

Feature Specification
Manufacturer SEALPAC GmbH
Model SEALPAC A5
Machine Type Tray Sealer / Schalenverschließanlage
Serial Number A5-01-2661
Year of Manufacture 2013
Electrical Connection 3 x 400 / 230 V
Frequency 50–60 Hz
Installed Power max. 8 kW
Machine Weight approx. 1,600 kg
Control System Touchscreen control panel
Construction Stainless steel
Working Environment Cleanroom / Clean room
Application Areas Medical / Food / Technical packaging

SEALPAC A5 Tray Sealer

Used – Excellent Condition – From Cleanroom Production
Previously used for cleanroom packaging of medical and laboratory consumables, including pipette tip racks.

This high-quality SEALPAC A5 tray sealing machine is designed for professional packaging applications where hygiene, reliability and process stability are essential.

The machine was previously operated in a cleanroom environment, making it particularly suitable for medical, laboratory and sensitive packaging applications. Thanks to its stainless steel construction, compact design and user-friendly control system, the machine offers reliable and efficient production performance.

As visible in the photos, the machine is in very clean and well-maintained condition.

General Condition

The machine is currently dismantled and stored. Visual condition is very clean and the machine was previously used in a professional production environment.

Ref. no.: 18439
Manufacturer: MOTAN
Year of construction: 1995

Further information:
MOTAN Central Drying & Vacuum Conveying System

Complete MOTAN central drying and automatic material conveying system for plastic injection molding applications.

The system includes:

* 15 pcs stainless steel drying hoppers
* Hopper capacity: 60 liters each

The system was used in technical plastics production and is suitable for processing hygroscopic materials such as:
PA, PC, PET, PBT, ABS, TPU and other engineering plastics.

System Components

1. MOTAN ADC 200/10 Dry Air Generator

* Year of manufacture: 1995
* Dry air capacity: approx. 200 m³/h
* Heating power: approx. 19.5 kW
* Central dry air generation system
* Desiccant drying technology

Function:
Provides low-humidity hot air for the drying hoppers.

2. MOTAN LA net 200 Central Control System

* Year of manufacture: 2006
* Central process and automation control unit
* Touchscreen operator panel
* Drying and conveying process management
* Alarm and monitoring functions

Function:
Central control of all drying, conveying and material distribution processes.

3. Drying Hoppers

* 15 pcs stainless steel drying hoppers
* Hopper volume: 60 liters each
* Central dry air connection
* Automatic material loading
* Suitable for technical plastics drying

4. Central Vacuum Conveying System

* Elmo Rietschle central vacuum pump
* Automatic granule conveying system
* Central material distribution
* Multi-machine supply capability

5. Stainless Steel Piping & Filter System

* Central conveying pipework
* Filter units
* Material loaders
* Automatic distribution station

Working Principle

Plastic granules are automatically conveyed through the central vacuum system into the drying hoppers.

The MOTAN ADC 200/10 dry air generator produces low-humidity hot air which continuously circulates through the material inside the hoppers.

During this process, moisture is removed from the plastic granules to prepare the material for injection molding production.

After drying, the material is automatically transported through the central conveying lines and distributed to the connected injection molding machines.

All drying and conveying processes are centrally controlled via the MOTAN LA net 200 control system

Condition

The system was in production operation until dismantling.

Further technical information, photos and videos available on request.

Ref. no.: 18622
Manufacturer: DEMAG
Year of construction: 2008

Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 115 cm³
Shot weight: 103 g
Injection pressure: 1600 bar

Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg

Additional information & extras
Core pull: 1 pcs

Further information:
The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.

All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.

The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.

The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.

Key advantages of the IntElect series:

* All-electric direct-drive servo technology
* Extremely low energy consumption
* High precision and process repeatability
* Quiet and low-vibration operation
* High dynamic servo performance
* Low maintenance requirements
* Clean production environment
* Ideal solution for technical and precision plastic parts
* Suitable for high-speed serial production

The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.

The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Ref. no.: 18621
Manufacturer: DEMAG
Year of construction: 2008

Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 115 cm³
Shot weight: 103 g
Injection pressure: 1600 bar

Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg

Further information:
The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.

All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.

The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.

The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.

Key advantages of the IntElect series:

* All-electric direct-drive servo technology
* Extremely low energy consumption
* High precision and process repeatability
* Quiet and low-vibration operation
* High dynamic servo performance
* Low maintenance requirements
* Clean production environment
* Ideal solution for technical and precision plastic parts
* Suitable for high-speed serial production

The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.

The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Ref. no.: 18620
Manufacturer: DEMAG
Year of construction: 2008

Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm

Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 76 g
Injection pressure: 2180 bar

Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg

Additional information & extras
Core pull: 1 pcs

Further information:
The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.

All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.

The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.

The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.

Key advantages of the IntElect series:

* All-electric direct-drive servo technology
* Extremely low energy consumption
* High precision and process repeatability
* Quiet and low-vibration operation
* High dynamic servo performance
* Low maintenance requirements
* Clean production environment
* Ideal solution for technical and precision plastic parts
* Suitable for high-speed serial production

The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.

The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Ref. no.: 18619
Manufacturer: DEMAG
Year of construction: 2008

Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm

Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 76 g
Injection pressure: 2180 bar

Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg

Further information:
Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden.

Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und ermöglichen dadurch höchste Präzision, ausgezeichnete Wiederholgenauigkeit und maximale Prozessstabilität.

Die IntElect Serie ist besonders bekannt für ihren niedrigen Energieverbrauch und ihre hohe Produktionspräzision. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen können – abhängig von der Anwendung – Energieeinsparungen von ca. 60 % bis zu 80 % erzielt werden. Gleichzeitig reduziert die geringe Wärmeentwicklung den Kühlbedarf und senkt die gesamten Betriebskosten.

Die Maschine verfügt über ein direktes Servo-Einspritz- und Dosiersystem, das sehr schnelle Reaktionszeiten und eine hochpräzise Einspritzsteuerung ermöglicht. Die Spritzeinheit ist mit 4 Heizzonen ausgestattet und sorgt dadurch für eine homogene Plastifizierung sowie stabile Prozessbedingungen, insbesondere bei technischen Kunststoffen.

Die wichtigsten Vorteile der IntElect Serie:

* Vollelektrische Direct-Drive Servo-Technologie
* Sehr geringer Energieverbrauch
* Hohe Präzision und Prozesswiederholgenauigkeit
* Geräuscharmer und vibrationsarmer Betrieb
* Hohe dynamische Servo-Performance
* Geringer Wartungsaufwand
* Saubere Produktionsumgebung
* Ideale Lösung für technische und Präzisionsteile
* Geeignet für schnelle Serienproduktionen

Die Sumitomo Demag IntElect Serie zählt aufgrund ihrer langen Lebensdauer, stabilen Produktionsleistung und hohen Energieeffizienz auch heute noch zu den gefragtesten vollelektrischen Spritzgießmaschinen am Markt.

Ref. no.: 18610
Manufacturer: DEMAG
Year of construction: 2012

Clamping unit
Clamping force: 160 ton
Opening stroke: 495 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 275 mm
Mould height max.: 585 mm
Platen size (h x v): 760 x 785 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 156 cm³
Shot weight: 139 g
Injection pressure: 2180 bar

Measurements and weight
Dimensions: 5,4 x 1,5 x 2,1 m
Machine weight: 7600 kg

Further information:
The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.

All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.

The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.

The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.

Key advantages of the IntElect series:

* All-electric direct-drive servo technology
* Extremely low energy consumption
* High precision and process repeatability
* Quiet and low-vibration operation
* High dynamic servo performance
* Low maintenance requirements
* Clean production environment
* Ideal solution for technical and precision plastic parts
* Suitable for high-speed serial production

The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.

The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Bending length: 3100 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 360 mm
Lower roll diameter: 360 mm
Lateral roll diameter: 270 mm
Max. opening: 60 mm
Working height: 1510 mm
Motor power: 22 kW
Length: 5560 mm
Width: 2060 mm
Height: 2050 mm
Weight: 16750 kg

Bending length: 2550 mm
Max. bending capacity - mild steel: 15
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 4760 mm
Width: 1660 mm
Height: 1155 mm
Weight: 8950 kg

Bending length: 3100 mm
Max. bending capacity - mild steel: 13
Max. plate thickness without prebending - mild steel: 12 mm
Max. plate thickness with prebending - mild steel: 8 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 5310 mm
Width: 1660 mm
Height: 1590 mm
Weight: 10050 kg

Bending length: 2550 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5500 mm
Width: 2000 mm
Height: 1900 mm
Weight: 13000 kg

Bending length: 2050 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1550 mm
Weight: 6100 kg

Bending length: 3100 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1550 mm
Weight: 7685 kg

Bending length: 2550 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4800 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6170 kg

Bending length: 2550 mm
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 220 mm
Lower roll diameter: 220 mm
Lateral roll diameter: 160 mm
Bending speed: 1,5-6 m/min
Motor power: 5.5 kW
Length: 4900 mm
Width: 1150 mm
Height: 1250 mm
Weight: 4600 kg

Bending length: 1550 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg

Bending length: 1550 mm
Max. bending capacity - mild steel: 2
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.5 kW
Length: 2130 mm
Width: 700 mm
Height: 1200 mm
Weight: 545 kg

Bending length: 1550 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2700 mm
Width: 750 mm
Height: 1000 mm
Weight: 1420 kg

Omac B110 Lobe pump, Unused, Stainless, durable and efficient lobe pump, complete with 3Ph Seipee motor, 1400Rpm, 0.55Kw motor, on stainless skid, 55mm inlet and outlet

Ref. no.: 18637
Manufacturer: BUSCH
Year of construction: 2010

Further information:
Make | Model | Year | Capacity | Frequency |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |

BUSCH MINK MM 1252 AV VACUUM PUMPS

A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale.

The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications.

TECHNICAL SPECIFICATIONS
• Manufacturer: Busch
• Model: MINK MM 1252 AV
• Technology: Dry Claw / Oil-Free Vacuum Technology
• Capacity: 250 – 300 m³/h
• Final Vacuum: 100 hPa (0.1 bar)
• Frequency: 50/60 Hz
• Year of Manufacture: 2009 / 2010
• Origin: Germany

MAIN ADVANTAGES
• Oil-free operating system
• Low maintenance costs
• Energy-efficient operation
• Quiet and reliable performance
• Suitable for continuous industrial operation
• High Busch quality with worldwide service support

APPLICATION AREAS
• Plastic injection molding machines
• Central vacuum systems
• Packaging machines
• Thermoforming systems
• Automation and conveying systems
• Industrial production facilities

Ref. no.: 18636
Manufacturer: EICHHOLZ
Year of construction: 2014

Further information:
WHAT IS AN OCTABIN TIPPER?

An octabin tipper is an industrial automation system used for the controlled and safe discharge of plastic raw materials, granules, or regrind materials from large-volume octabin containers.

Heavy octabins are loaded by forklift and then lifted and tilted in a controlled manner using a hydraulic or chain-driven mechanism. The material is discharged into the lower hopper and can then be transferred to the production line via vacuum conveying or dosing systems.

These systems are widely used in plastic injection molding and extrusion plants to reduce labor, increase production efficiency, and ensure safe material handling.

FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEM

For sale: 1 heavy-duty industrial octabin tipper / material discharge system.

The system was removed from a running plastic production line and is in clean and good cosmetic condition.

The machine is designed for the controlled discharge of plastic raw materials from large-volume octabins and for transferring the material into centralized conveying systems.

The system is equipped with high-quality industrial components from Aerzen, Rittal, Omron, and DMN Westinghouse.

BRANDED COMPONENTS INCLUDED IN THE SYSTEM

Aerzen Vacuum / Blower Unit (Germany)

Aerzen is one of the world’s leading German manufacturers of industrial blower and vacuum technologies.

Technical Details

• Brand: Aerzen
• Model: GM15L
• Year: 2014
• Capacity: 12.50 m³/min
• Motor Power: 11 kW
• Max. Pressure: 1.25 bar
• Operating Pressure: 1.0 bar
• Weight: approx. 626 kg

Advantages

• High-efficiency German technology
• Suitable for continuous industrial operation
• Reliable and low-maintenance
• Ideal for centralized vacuum systems

Rittal Industrial Control System

The system is equipped with a Rittal industrial control cabinet.

Rittal is a globally recognized premium brand in industrial automation and control systems.

Features

• Industrial control cabinet
• Operator control system
• Integrated safety circuits
• CE-compliant construction

Omron Safety Sensors

The machine is equipped with Omron safety sensors.

Features

• Industrial safety barriers
• Operator protection system
• Safe working area monitoring
• Compatible with automation systems

DMN Westinghouse Rotary Valve System

A DMN Westinghouse rotary valve is installed at the lower hopper outlet.

DMN Westinghouse is a globally recognized premium manufacturer for bulk material handling systems.

Technical Details

• Brand: DMN Westinghouse
• Model: ALD 200-6
• Low-dust controlled material transfer
• Suitable for granule and bulk material applications

Advantages

• Controlled material flow
• Reliable continuous operation
• Suitable for centralized conveying systems

Druck: 100 t
Tischlänge: 1800 mm
Tischbreite: 1550 mm
Tischweg: 2000 mm
Einbauhöhe: 1800 mm
Gesamtleistungsbedarf: 19,5 KVA
Maschinengewicht ca.: 22 t

Blechbreite: 3355 mm
Blechstärke: 63,5 mm
Rollendurchmesser: 686 mm
Spannung: 400 V
Gesamtleistungsbedarf: 150 HP
Maschinengewicht ca.: 95 t
Raumbedarf ca.: 62 m

x-Weg: 850 mm
y-Weg: 300 mm
z-Weg: 550 mm
Tischfläche: 1100x270 mm
Drehzahl: U/min
Vorschub: . m/min
Ausladung: . mm
Spindelhub: . mm
Aufnahme: Sk40

x-Weg: 8000 mm
y-Weg: 2500 mm
z-Weg: 1000 mm
Steuerung: Heidenhain TNC 355
Aufnahme ISO: 50
Werkstückspindel-Drehzahlen: 20 - 1800 mm
Spannung: 380 V
Gesamtleistungsbedarf: 27,6 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

x-Weg: 1060 mm
y-Weg: 710 mm
z-Weg: 710 mm
Steuerung: Heidenhain
Typ: ITNC 530
Spindeldrehzahl:: .
Spindelaufnahme: SK 40
Aufspannfläche: 1500x795 mm
Tischbelastung: 550 kg
Vorschubantrieb: 20-15000 kW
Eilgang: 30000 mm/min
Rundtisch: 800 mm
Durchmesser: 800 mm
Tischdrehzahlbereich: 15 U/min
Werkzeugwechsler: 32

Spindeldurchmesser: 100 mm
x-Weg: 1500 mm
y-Weg: 1250 mm
z-Weg: 1800 mm
Drehzahl: 7,1-1120 U/min
Tischfläche: 1200x1200 mm
w-Achse: 800 mm
Planschieber: 600 mm
Planschieberweg: 200 mm
Setzstock: mm
Digitalanzeige: Heidenhain
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Kernbohrdurchmesser - max.: 50-600 mm
Bohrtiefe: 6000 mm
Tischbelastung: 6 t
Drehzahl: 50-600 U/min
Einspanndurchmesser max.: 650 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Drehdurchmesser über Bett: 980 mm
Drehdurchmesser über Support: 720 mm
Drehlänge: 7000 mm
Bettbreite: 620 mm
Drehzahl: 1,8-355 U/min
Planscheiben Durchmesser: 800 mm
Drehdurchmesser in der Kröpfung: 1000 mm
Länge der Kröpfung: 350 mm
Pinolenhub: 900 mm
Spindeldurchlaß: 80 mm
Gewicht: 20 t
Lünette: 480 mm

Drehdurchmesser über Bett: 540 mm
Drehdurchmesser über Support: 340 mm
Drehdurchmesser in der Kröpfung: 800 mm
Länge der Kröpfung: 350 mm
Drehlänge: 3000 mm
Drehzahl: 40-1800 U/min
Bettbreite: 340 mm
Dreibackenfutter: 255 mm
Spindeldurchlass: 52 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Drehdurchmesser über Bett: 430 mm
Drehdurchmesser über Support: 220 mm
Drehdurchmesser in der Kröpfung: . mm
Drehlänge: . mm
Drehzahl: 12,5-1600 U/min
Bettbreite: 410 mm
Dreibackenfutter: 250 mm
Spindeldurchlass: 550 mm
Spitzenweite: 750 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 2 t
Raumbedarf ca.: m

Drehdurchmesser über Bett: 1000 mm
Drehdurchmesser über Support: 760 mm
Drehlänge: 2750 mm
Spindelbohrung: 82 mm
Drehzahl: 3,55-710 U/min
Planscheibe: 1000 mm
Dreibackenfutter: 500 mm
Lünette: 2
Drehdurchmesser in der Kröpfung: 1400 mm
Länge der Kröpfung: 900 mm
Gesamtleistungsbedarf: 22 kW
Maschinengewicht ca.: 10 t
Raumbedarf ca.: 8x2x1,8 m

Planscheibendurchmesser: 2000 mm
Drehdurchmesser: 2500 mm
Drehzahl: 0,5-100 U/min
Werkstückgewicht max. - fliegend: 6000 kg
Werkstückgewicht zwischen Spitzen max.: 25000 kg
Plattenfeld: mm
Drehdurchmesser in der Grube: 3200 mm
Gesamtleistungsbedarf: 55 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 22x5x4 m

Planscheibendurchmesser: 1400 mm
Umlaufdurchmesser: 1600 mm
Drehhöhe: 1200 mm
Drehzahlbereich - fräsen: 1 - 240 U/min
Steuerung: Siemens SIN 820T
Stößelsupport - Horizontalverstellung: 1000 mm
Gesamtleistungsbedarf: 55 kW
Raumbedarf ca.: m

Drehdurchmesser: 555 mm
Drehlänge: 4000 mm
Steuerung: Monforts Control System
Typ: MTC-K CCUO
Drehdurchmesser über Support: 290 mm
Planweg: . mm
Spindeldurchlass: . mm
Drehzahl: 1600 U/min
Getriebestufen: .
Pinolenhub: . mm
Eilgang: . m/min
Hauptantriebsmotor: . kW
Dreibackenfutter: Rotha-S Plus
Dreibackenfutter Durchmesser: . mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m