_thumb.jpeg "Show advert")
-2_thumb.jpeg "Show advert")
-3_thumb.jpeg "Show advert")
-4_thumb.jpeg "Show advert")
-5_thumb.jpeg "Show advert")
6
Printing machineryCutting machines
Schneider Senator 76 e-line
Complete with spare knife and knife change tools
Air table
Year 1996
Schneider Senator 76 e-line
Complete with spare knife and knife change tools
Air table
Year 1996
Complete with spare knife and knife change tools
Air table
Year 1996
 Nijmegen_thumb.jpg "Show advert")
 -6 _thumb.jpg "Show advert")
2
Printing machineryPost press machinesPile elevators
Polar LW 1000-4 Stack Lift
Year: 2001
Platform 80 × 126 mm.
The lift automatically raises the material to an ergonomic working height, allowing the operator to easily load it into the jogger or directly into the cutting machine.
It can also be used for stacking the cut material.
No floor anchoring is required, so the unit is easy to relocate.
Equipped with continuously adjustable reflex light barriers for automatic lifting and lowering.
The control panel can be mounted on either the right or left side.
Polar LW 1000-4 Stack Lift
Year: 2001
Platform 80 × 126 mm.
The lift automatically raises the material to an ergonomic working height, allowing the operator to easily load it into the jogger or directly into the cutting machine.
It can also be used for stacking the cut material.
No floor anchoring is required, so the unit is easy to relocate.
Equipped with continuously adjustable reflex light barriers for automatic lifting and lowering.
The control panel can be mounted on either the right or left side.
Year: 2001
Platform 80 × 126 mm.
The lift automatically raises the material to an ergonomic working height, allowing the operator to easily load it into the jogger or directly into the cutting machine.
It can also be used for stacking the cut material.
No floor anchoring is required, so the unit is easy to relocate.
Equipped with continuously adjustable reflex light barriers for automatic lifting and lowering.
The control panel can be mounted on either the right or left side.
2
Metal working and machine toolsLathes
Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
3
Printing machineryOther
Pescha round cornering
Radius of knige ± 5 mm
Pescha round cornering
Radius of knige ± 5 mm
Radius of knige ± 5 mm
9
Metal working and machine toolsSheet metal working machinesPipe-bending machines
Round tube: 42 x 2,5 mm
Square tube: 40 x 1,2 mm
Rect. tube easy way: 30 x 40 x 1,7 mm
Rect. tube hard way: 40 x 30 x 1,3 mm
Max. bending radius: 255 mm
Min. bending radius: 22 mm
Max. bending angle: 180 °
Speed: 90 °/s
Motor: 5 kW
Hydraulic oil capacity: 120 l
Length: 4665 mm
Width: 800 mm
Height: 1160 mm
Weight: 1470 kg
Round tube: 42 x 2,5 mm
Square tube: 40 x 1,2 mm
Rect. tube easy way: 30 x 40 x 1,7 mm
Rect. tube hard way: 40 x 30 x 1,3 mm
Max. bending radius: 255 mm
Min. bending radius: 22 mm
Max. bending angle: 180 °
Speed: 90 °/s
Motor: 5 kW
Hydraulic oil capacity: 120 l
Length: 4665 mm
Width: 800 mm
Height: 1160 mm
Weight: 1470 kg
Square tube: 40 x 1,2 mm
Rect. tube easy way: 30 x 40 x 1,7 mm
Rect. tube hard way: 40 x 30 x 1,3 mm
Max. bending radius: 255 mm
Min. bending radius: 22 mm
Max. bending angle: 180 °
Speed: 90 °/s
Motor: 5 kW
Hydraulic oil capacity: 120 l
Length: 4665 mm
Width: 800 mm
Height: 1160 mm
Weight: 1470 kg
11
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18643
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
Ref. no.: 18643
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
4
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 18 mm
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Quill travel: 100 mm
Distance spindle - table: 155 - 415 mm
Distance spindle-base: 155 - 550 mm
Table: 340 x 280 mm
Column diameter: 82 mm
Length: 355 mm
Width: 705 mm
Height: 1065 mm
Weight: 170 kg
Drilling capacy mild steel: 18 mm
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Quill travel: 100 mm
Distance spindle - table: 155 - 415 mm
Distance spindle-base: 155 - 550 mm
Table: 340 x 280 mm
Column diameter: 82 mm
Length: 355 mm
Width: 705 mm
Height: 1065 mm
Weight: 170 kg
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Quill travel: 100 mm
Distance spindle - table: 155 - 415 mm
Distance spindle-base: 155 - 550 mm
Table: 340 x 280 mm
Column diameter: 82 mm
Length: 355 mm
Width: 705 mm
Height: 1065 mm
Weight: 170 kg
-1_thumb.jpeg "Show advert")
-2_thumb.jpeg "Show advert")
-3_thumb.jpeg "Show advert")
-4_thumb.jpeg "Show advert")
-5_thumb.jpeg "Show advert")
-6_thumb.jpeg "Show advert")
-7_thumb.jpeg "Show advert")
8
Printing machineryBinding machines
Horauf BDM Universal
Max cover dimensions:410 x 720 mm
Min cover dimenions: 170 x 105 mm
Cardboard thickiness min 1 mm to max 4 mm
Cover paper material: 80-120 g/m2
Horauf BDM Universal
Max cover dimensions:410 x 720 mm
Min cover dimenions: 170 x 105 mm
Cardboard thickiness min 1 mm to max 4 mm
Cover paper material: 80-120 g/m2
Max cover dimensions:410 x 720 mm
Min cover dimenions: 170 x 105 mm
Cardboard thickiness min 1 mm to max 4 mm
Cover paper material: 80-120 g/m2
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
_thumb.jpeg "Show advert")
-6._thumb.jpeg "Show advert")
10
Printing machineryPost press machinesBinding machines
ang 470 PLC Ring Binder & Lever arch Assembly Line
High-performance automatic production line for ring binders
Brand: Hang
Year: 2007
Model: 470 PLC – FANUC Controlled
This fully automatic line is designed for efficient production of ring binders according to customer specifications. The machine is equipped with multiple processing stations and a Fanuc PLC control with touchscreen interface.
Main Components:
Sheet feeder (Saug-Anleger)
Creasing station
Gripping hole punching unit (Griffloch-Ösmaschine)
Double riveting station
Operator control panel (Fanuc QuickPanel View)
Mechanic feeding unit
Single riveting station
Folding station
Technical Specifications
PLC Control: FANUC with memory for up to 1000 programs and modem for remote support
Setup time: Approx. 2-3 minutes
Material Range:
Cover height: 120 – 400 mm
Cover width: 300 – 820 mm
Material thickness: Min. 1 mm – Max. 3.5 mm
Rivet spacing: 90 – 300 mm
Machine Condition
- In excellent working condition
-Touch panel with program counter, total counter and production statistics
- Fanuc QuickPanel View display
- Ready for immediate production
- Available for inspection in our warehouse
Production Counter Information (Machine Usage)
Day Counter: 250,895 cycles
Total Counter: 9,495,162 cycles
Product Counter: 1,336,482 units
Operating Time: 12,838 hours
ang 470 PLC Ring Binder & Lever arch Assembly Line
High-performance automatic production line for ring binders
Brand: Hang
Year: 2007
Model: 470 PLC – FANUC Controlled
This fully automatic line is designed for efficient production of ring binders according to customer specifications. The machine is equipped with multiple processing stations and a Fanuc PLC control with touchscreen interface.
Main Components:
Sheet feeder (Saug-Anleger)
Creasing station
Gripping hole punching unit (Griffloch-Ösmaschine)
Double riveting station
Operator control panel (Fanuc QuickPanel View)
Mechanic feeding unit
Single riveting station
Folding station
Technical Specifications
PLC Control: FANUC with memory for up to 1000 programs and modem for remote support
Setup time: Approx. 2-3 minutes
Material Range:
Cover height: 120 – 400 mm
Cover width: 300 – 820 mm
Material thickness: Min. 1 mm – Max. 3.5 mm
Rivet spacing: 90 – 300 mm
Machine Condition
- In excellent working condition
-Touch panel with program counter, total counter and production statistics
- Fanuc QuickPanel View display
- Ready for immediate production
- Available for inspection in our warehouse
Production Counter Information (Machine Usage)
Day Counter: 250,895 cycles
Total Counter: 9,495,162 cycles
Product Counter: 1,336,482 units
Operating Time: 12,838 hours
High-performance automatic production line for ring binders
Brand: Hang
Year: 2007
Model: 470 PLC – FANUC Controlled
This fully automatic line is designed for efficient production of ring binders according to customer specifications. The machine is equipped with multiple processing stations and a Fanuc PLC control with touchscreen interface.
Main Components:
Sheet feeder (Saug-Anleger)
Creasing station
Gripping hole punching unit (Griffloch-Ösmaschine)
Double riveting station
Operator control panel (Fanuc QuickPanel View)
Mechanic feeding unit
Single riveting station
Folding station
Technical Specifications
PLC Control: FANUC with memory for up to 1000 programs and modem for remote support
Setup time: Approx. 2-3 minutes
Material Range:
Cover height: 120 – 400 mm
Cover width: 300 – 820 mm
Material thickness: Min. 1 mm – Max. 3.5 mm
Rivet spacing: 90 – 300 mm
Machine Condition
- In excellent working condition
-Touch panel with program counter, total counter and production statistics
- Fanuc QuickPanel View display
- Ready for immediate production
- Available for inspection in our warehouse
Production Counter Information (Machine Usage)
Day Counter: 250,895 cycles
Total Counter: 9,495,162 cycles
Product Counter: 1,336,482 units
Operating Time: 12,838 hours
1
Metal working and machine toolsSheet metal working machinesPress brakes
Druck: 100 tAbkantlänge: 3000 mmStänderweite: 2550 mmHub: 150 mmGesamtleistungsbedarf: kWBetriebsstunden: . hMaschinengewicht ca.: 8,3 tRaumbedarf ca.: m
Druck: 100 t
Abkantlänge: 3000 mm
Ständerweite: 2550 mm
Hub: 150 mm
Gesamtleistungsbedarf: kW
Betriebsstunden: . h
Maschinengewicht ca.: 8,3 t
Raumbedarf ca.: m
Abkantlänge: 3000 mm
Ständerweite: 2550 mm
Hub: 150 mm
Gesamtleistungsbedarf: kW
Betriebsstunden: . h
Maschinengewicht ca.: 8,3 t
Raumbedarf ca.: m
5
Metal working and machine toolsDrilling machines and boring mills
Drilling capacy mild steel: 18 mm
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Motor: 0.75 kW
Tapping capacity: M12
Feeds: manual mm/r
Column diameter: 82 mm
Distance spindle - table: 180 - 870 mm
Table: 340 x 280 mm
Quill travel: 100 mm
Length: 705 mm
Width: 355 mm
Height: 1825 mm
Weight: 195 kg
Drilling capacy mild steel: 18 mm
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Motor: 0.75 kW
Tapping capacity: M12
Feeds: manual mm/r
Column diameter: 82 mm
Distance spindle - table: 180 - 870 mm
Table: 340 x 280 mm
Quill travel: 100 mm
Length: 705 mm
Width: 355 mm
Height: 1825 mm
Weight: 195 kg
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Motor: 0.75 kW
Tapping capacity: M12
Feeds: manual mm/r
Column diameter: 82 mm
Distance spindle - table: 180 - 870 mm
Table: 340 x 280 mm
Quill travel: 100 mm
Length: 705 mm
Width: 355 mm
Height: 1825 mm
Weight: 195 kg
10
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18565
Hersteller: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
Ref. no.: 18565
Hersteller: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
Hersteller: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
5
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 5200x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 650x460 mm
Cutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3100 mm
Width: 1000 mm
Height: 1800 mm
Weight: 1520 kg
Saw frame: Double column
Band dimensions: 5200x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 650x460 mm
Cutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3100 mm
Width: 1000 mm
Height: 1800 mm
Weight: 1520 kg
Band dimensions: 5200x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 650x460 mm
Cutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3100 mm
Width: 1000 mm
Height: 1800 mm
Weight: 1520 kg
10
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 5400x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 450 mm
Cutting capacity 0° square: 425 mm
Cutting capacity 0° flat: 560x425 mm
Cutting capacity 45°: rund 430 mm, quadrat 425 mm, rechteck 430 x 425 mm
Cutting capacity 60°: rund 320 mm, quadrat 290 mm, rechteck 425 x 260 mm
Working height: 690 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3090 mm
Width: 1200 mm
Height: 1940 mm
Weight: 1630 kg
Saw frame: Double column
Band dimensions: 5400x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 450 mm
Cutting capacity 0° square: 425 mm
Cutting capacity 0° flat: 560x425 mm
Cutting capacity 45°: rund 430 mm, quadrat 425 mm, rechteck 430 x 425 mm
Cutting capacity 60°: rund 320 mm, quadrat 290 mm, rechteck 425 x 260 mm
Working height: 690 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3090 mm
Width: 1200 mm
Height: 1940 mm
Weight: 1630 kg
Band dimensions: 5400x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 450 mm
Cutting capacity 0° square: 425 mm
Cutting capacity 0° flat: 560x425 mm
Cutting capacity 45°: rund 430 mm, quadrat 425 mm, rechteck 430 x 425 mm
Cutting capacity 60°: rund 320 mm, quadrat 290 mm, rechteck 425 x 260 mm
Working height: 690 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3090 mm
Width: 1200 mm
Height: 1940 mm
Weight: 1630 kg
6
Metal working and machine toolsSawingBelt saws
Saw frame: Double column
Band dimensions: 4800x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 380 mm
Cutting capacity 0° square: 380 mm
Cutting capacity 0° flat: 520x380 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 380 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 930 mm
Height: 1660 mm
Weight: 1330 kg
Saw frame: Double column
Band dimensions: 4800x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 380 mm
Cutting capacity 0° square: 380 mm
Cutting capacity 0° flat: 520x380 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 380 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 930 mm
Height: 1660 mm
Weight: 1330 kg
Band dimensions: 4800x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 380 mm
Cutting capacity 0° square: 380 mm
Cutting capacity 0° flat: 520x380 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 380 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 930 mm
Height: 1660 mm
Weight: 1330 kg
1
Metal working and machine toolsSawingBelt saws
Saw frame: Pivot frame
Band dimensions: 4160x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 610x320 mm
Cutting capacity 30°: rund 260 mm, quadrat 225 mm, rechteck 280 x 200 mm
Cutting capacity 45°: rund 320 mm, quadrat 320 mm, rechteck 355 x 320 mm
Cutting capacity 60°: rund 320 mm, quadrat 320 mm, rechteck 510 x 320 mm
Working height: 740 mm
Hydraulic motor: 0.37 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Cutting capacity 75°: rund 320 mm, quadrat 320 mm, rechteck 580 x 320 mm
Length: 2100 mm
Width: 1200 mm
Height: 1350 mm
Weight: 1150 kg
Saw frame: Pivot frame
Band dimensions: 4160x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 610x320 mm
Cutting capacity 30°: rund 260 mm, quadrat 225 mm, rechteck 280 x 200 mm
Cutting capacity 45°: rund 320 mm, quadrat 320 mm, rechteck 355 x 320 mm
Cutting capacity 60°: rund 320 mm, quadrat 320 mm, rechteck 510 x 320 mm
Working height: 740 mm
Hydraulic motor: 0.37 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Cutting capacity 75°: rund 320 mm, quadrat 320 mm, rechteck 580 x 320 mm
Length: 2100 mm
Width: 1200 mm
Height: 1350 mm
Weight: 1150 kg
Band dimensions: 4160x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 610x320 mm
Cutting capacity 30°: rund 260 mm, quadrat 225 mm, rechteck 280 x 200 mm
Cutting capacity 45°: rund 320 mm, quadrat 320 mm, rechteck 355 x 320 mm
Cutting capacity 60°: rund 320 mm, quadrat 320 mm, rechteck 510 x 320 mm
Working height: 740 mm
Hydraulic motor: 0.37 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Cutting capacity 75°: rund 320 mm, quadrat 320 mm, rechteck 580 x 320 mm
Length: 2100 mm
Width: 1200 mm
Height: 1350 mm
Weight: 1150 kg
1
Metal working and machine toolsSheet metal working machinesPunching
Punching power: 50 ton
Throat depth: 130 mm
Max. diameter at sheet thickness (mild steel): 13/27 mm
Max. number of strokes at 20 mm stroke: 23 1/min
Motor: 3 kW
Length: 1100 mm
Width: 900 mm
Height: 1550 mm
Weight: 355 kg
Punching power: 50 ton
Throat depth: 130 mm
Max. diameter at sheet thickness (mild steel): 13/27 mm
Max. number of strokes at 20 mm stroke: 23 1/min
Motor: 3 kW
Length: 1100 mm
Width: 900 mm
Height: 1550 mm
Weight: 355 kg
Throat depth: 130 mm
Max. diameter at sheet thickness (mild steel): 13/27 mm
Max. number of strokes at 20 mm stroke: 23 1/min
Motor: 3 kW
Length: 1100 mm
Width: 900 mm
Height: 1550 mm
Weight: 355 kg
2
Metal working and machine toolsSheet metal working machinesFeed straighteners
Coil weight: 4000 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 4000 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
2
Metal working and machine toolsSheet metal working machinesFeed straighteners
Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
2
Metal working and machine toolsSheet metal working machinesFeed straighteners
Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
2
Metal working and machine toolsSheet metal working machinesFeed straighteners
Coil weight: 1250 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 1250 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
7
Metal working and machine toolsDeburring machines
Working width: 1300
Sheet thickness range - mild steel: 150 mm
Brush diameter: 150 mm
Vacuum area: 250x350 mm
Table height: 945 mm
Motor: 0.75 kW
Length: 1400 mm
Width: 1000 mm
Height: 1450 mm
Weight: 300 kg
Working width: 1300
Sheet thickness range - mild steel: 150 mm
Brush diameter: 150 mm
Vacuum area: 250x350 mm
Table height: 945 mm
Motor: 0.75 kW
Length: 1400 mm
Width: 1000 mm
Height: 1450 mm
Weight: 300 kg
Sheet thickness range - mild steel: 150 mm
Brush diameter: 150 mm
Vacuum area: 250x350 mm
Table height: 945 mm
Motor: 0.75 kW
Length: 1400 mm
Width: 1000 mm
Height: 1450 mm
Weight: 300 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1030 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Strokes: 10 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 5000 mm
Motor power: 11 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1900 kg
Cutting length: 1030 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Strokes: 10 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 5000 mm
Motor power: 11 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1900 kg
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Strokes: 10 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 5000 mm
Motor power: 11 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1900 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1030 mm
Max. thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 7.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1800 kg
Cutting length: 1030 mm
Max. thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 7.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1800 kg
Max. thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 7.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1800 kg
1
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 1030 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 5.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1700 kg
Cutting length: 1030 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 5.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1700 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 5.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1700 kg
2
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 6080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 29 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 5 pcs.
Table height: 900 mm
Table width: 630 mm
Table length: 6370 mm
Length: 7300 mm
Width: 2150 mm
Total width with support arm und protection fence: 3400 mm
Height: 2750 mm
Weight: 25500 kg
Cutting length: 6080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 29 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 5 pcs.
Table height: 900 mm
Table width: 630 mm
Table length: 6370 mm
Length: 7300 mm
Width: 2150 mm
Total width with support arm und protection fence: 3400 mm
Height: 2750 mm
Weight: 25500 kg
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 29 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 5 pcs.
Table height: 900 mm
Table width: 630 mm
Table length: 6370 mm
Length: 7300 mm
Width: 2150 mm
Total width with support arm und protection fence: 3400 mm
Height: 2750 mm
Weight: 25500 kg
2
Metal working and machine toolsLathes
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
8
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18591
Hersteller: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Ref. no.: 18591
Hersteller: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Hersteller: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
10
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18494
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
Ref. no.: 18494
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
_thumb.jpeg "Show advert")
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18589
Hersteller: NETSTAL
Year of construction: 2015
Clamping unit
Clamping force: 175 ton
Opening stroke: 450 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 500 mm
Mould height max.: 800 mm
Platen size (h x v): 830 x 845 mm
Injection unit
Screw diameter: 40 mm
Injection volume: 201 cm³
Shot weight: 193 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 7,1x2,2x2,0 m
Machine weight: 12750 kg
Ref. no.: 18589
Hersteller: NETSTAL
Year of construction: 2015
Clamping unit
Clamping force: 175 ton
Opening stroke: 450 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 500 mm
Mould height max.: 800 mm
Platen size (h x v): 830 x 845 mm
Injection unit
Screw diameter: 40 mm
Injection volume: 201 cm³
Shot weight: 193 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 7,1x2,2x2,0 m
Machine weight: 12750 kg
Hersteller: NETSTAL
Year of construction: 2015
Clamping unit
Clamping force: 175 ton
Opening stroke: 450 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 500 mm
Mould height max.: 800 mm
Platen size (h x v): 830 x 845 mm
Injection unit
Screw diameter: 40 mm
Injection volume: 201 cm³
Shot weight: 193 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 7,1x2,2x2,0 m
Machine weight: 12750 kg
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18588
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
Ref. no.: 18588
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
5
Metal working and machine toolsSheet metal working machinesBending machines
Shaft diameter: 50
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
Shaft diameter: 50
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
10
Metal working and machine toolsDrilling machines and boring millsPlate boring mills
Spindeldurchmesser: 205 mmx-Weg: 10000 mmy-Weg: 2500 mmw-Achse: 500 mmSpindelweg: 1250 mmSteuerung: HeidenhainTyp: TNC 355Spindelaufnahme ISO: 50Getriebestufen: 2Vorschub - selbsttätig: 0-3000 mmSpindelantrieb: 37 kWGesamtleistungsbedarf: 70 kWMaschinengewicht ca.: tRaumbedarf ca.: 14,1x3,2x5,6 m
Spindeldurchmesser: 205 mm
x-Weg: 10000 mm
y-Weg: 2500 mm
w-Achse: 500 mm
Spindelweg: 1250 mm
Steuerung: Heidenhain
Typ: TNC 355
Spindelaufnahme ISO: 50
Getriebestufen: 2
Vorschub - selbsttätig: 0-3000 mm
Spindelantrieb: 37 kW
Gesamtleistungsbedarf: 70 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 14,1x3,2x5,6 m
x-Weg: 10000 mm
y-Weg: 2500 mm
w-Achse: 500 mm
Spindelweg: 1250 mm
Steuerung: Heidenhain
Typ: TNC 355
Spindelaufnahme ISO: 50
Getriebestufen: 2
Vorschub - selbsttätig: 0-3000 mm
Spindelantrieb: 37 kW
Gesamtleistungsbedarf: 70 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 14,1x3,2x5,6 m
10
Metal working and machine toolsLathesCenter lathes and spindle lathes
Drehdurchmesser über Bett: . mmDrehdurchmesser über Support: . mmDrehlänge: 5000 mmBohrtiefe: . mmDigitalanzeige: DigitalanzeigeSpitzenhöhe: 600 mmUmlauf über Bett: 1200 mmAntrieb: 55 PSSpindeldrehzahlen: 5-1000 U/minEilgang: quer 2000 mm/minZubehör:: Stahlhalter, LynettenGewicht ohne Lynette: zwischen Spitzen 8000 kgGewicht mit Lynette: zwischen Spitzen 11500 kgGesamtleistungsbedarf: kWMaschinengewicht ca.: ca. 20 tRaumbedarf ca.: m
Drehdurchmesser über Bett: . mm
Drehdurchmesser über Support: . mm
Drehlänge: 5000 mm
Bohrtiefe: . mm
Digitalanzeige: Digitalanzeige
Spitzenhöhe: 600 mm
Umlauf über Bett: 1200 mm
Antrieb: 55 PS
Spindeldrehzahlen: 5-1000 U/min
Eilgang: quer 2000 mm/min
Zubehör:: Stahlhalter, Lynetten
Gewicht ohne Lynette: zwischen Spitzen 8000 kg
Gewicht mit Lynette: zwischen Spitzen 11500 kg
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: ca. 20 t
Raumbedarf ca.: m
Drehdurchmesser über Support: . mm
Drehlänge: 5000 mm
Bohrtiefe: . mm
Digitalanzeige: Digitalanzeige
Spitzenhöhe: 600 mm
Umlauf über Bett: 1200 mm
Antrieb: 55 PS
Spindeldrehzahlen: 5-1000 U/min
Eilgang: quer 2000 mm/min
Zubehör:: Stahlhalter, Lynetten
Gewicht ohne Lynette: zwischen Spitzen 8000 kg
Gewicht mit Lynette: zwischen Spitzen 11500 kg
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: ca. 20 t
Raumbedarf ca.: m
12
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18587
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 416 cm³
Shot weight: 375 g
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Ref. no.: 18587
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 416 cm³
Shot weight: 375 g
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 416 cm³
Shot weight: 375 g
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
13
Plastic processing machinesInjection molding machinesPlastic injection molding machines
Ref. no.: 18586
Hersteller: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg
Ref. no.: 18586
Hersteller: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg
Hersteller: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg
6
Food machinesContainers, shelves and tanks
Scandibrew holding tank, Stainless, 1000L holding tank, jacketed, central bottom discharge,
Scandibrew holding tank, Stainless, 1000L holding tank, jacketed, central bottom discharge,
6
Werkstückdurchmesser - max.: . mmWerkstückdurchmesser - min.: . mmWerkstücklänge: . mmEinspanndurchmesser max.: 550 mmHöhenverstellung: 800 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Werkstückdurchmesser - max.: . mm
Werkstückdurchmesser - min.: . mm
Werkstücklänge: . mm
Einspanndurchmesser max.: 550 mm
Höhenverstellung: 800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Werkstückdurchmesser - min.: . mm
Werkstücklänge: . mm
Einspanndurchmesser max.: 550 mm
Höhenverstellung: 800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsSheet metal working machinesPress brakes
Druck: 120 tAbkantlänge: . mmStänderweite: 2550 mmHub: 200 mmGesamtleistungsbedarf: kWBetriebsstunden: 2500 hMaschinengewicht ca.: 8,3 tRaumbedarf ca.: m
Druck: 120 t
Abkantlänge: . mm
Ständerweite: 2550 mm
Hub: 200 mm
Gesamtleistungsbedarf: kW
Betriebsstunden: 2500 h
Maschinengewicht ca.: 8,3 t
Raumbedarf ca.: m
Abkantlänge: . mm
Ständerweite: 2550 mm
Hub: 200 mm
Gesamtleistungsbedarf: kW
Betriebsstunden: 2500 h
Maschinengewicht ca.: 8,3 t
Raumbedarf ca.: m
Metal working and machine toolsWelding machinesOther
Länge: . mmHöhe: . mm
Länge: . mm
Höhe: . mm
Höhe: . mm
5
Food machinesCooling technologyRefrigerators
HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph
HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph
11
Food machinesConfectionery production
Sollich Minitemper Turbo MT150 chocolate tempering machine, Serial: 31542055, 2017, Stainless, 120Kg/h, HMI touch screen controls, mobile, also have the Sollich RT250 chocolate tank that went inline available, mobile, 3Ph
Sollich Minitemper Turbo MT150 chocolate tempering machine, Serial: 31542055, 2017, Stainless, 120Kg/h, HMI touch screen controls, mobile, also have the Sollich RT250 chocolate tank that went inline available, mobile, 3Ph
5
Food machinesPackaging machinery
Soco T10 Case taper, Serial: 17395T10, 2017, Top and bottom case taper, side grip belts, max box with 500mm, max box height 550mm, 3Ph
Soco T10 Case taper, Serial: 17395T10, 2017, Top and bottom case taper, side grip belts, max box with 500mm, max box height 550mm, 3Ph
8
Food machinesAccessories and spare parts
Logopak 410 IIIF Labeller, Serial: LP10021552, Logopak print and apply labeller, mounted on variable speed conveyor, conveyor 700mm x 300mm, previously used on labels 100mm x 60mm,
Logopak 410 IIIF Labeller, Serial: LP10021552, Logopak print and apply labeller, mounted on variable speed conveyor, conveyor 700mm x 300mm, previously used on labels 100mm x 60mm,
6
Food machinesPackaging machinery
Carton Sealer Case taper, Top case taper, side grip belts, max box width 450mm x max box height 550mm, mobile, 3Ph
Carton Sealer Case taper, Top case taper, side grip belts, max box width 450mm x max box height 550mm, mobile, 3Ph
5
Metal working and machine toolsSheet metal working machinesPress brakes
pressing capacity: 120 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R-axis
Stroke: 180 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 375 mm
Power concept: hydraulic
rapid speed Y-axis: 100 mm/s
Working speed Y-axis: 9
Retractionspeed Y-axis: 77
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 878 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 11 kW
Length: 3750 mm
Width: 1230 mm
Height: 2400 mm
Weight: 5900 kg
pressing capacity: 120 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R-axis
Stroke: 180 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 375 mm
Power concept: hydraulic
rapid speed Y-axis: 100 mm/s
Working speed Y-axis: 9
Retractionspeed Y-axis: 77
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 878 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 11 kW
Length: 3750 mm
Width: 1230 mm
Height: 2400 mm
Weight: 5900 kg
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R-axis
Stroke: 180 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 375 mm
Power concept: hydraulic
rapid speed Y-axis: 100 mm/s
Working speed Y-axis: 9
Retractionspeed Y-axis: 77
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 878 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 11 kW
Length: 3750 mm
Width: 1230 mm
Height: 2400 mm
Weight: 5900 kg
6
Metal working and machine toolsSheet metal working machinesPlate shears
Cutting length: 2050 mm
Max. thickness - mild steel: 6 mm
Strokes: 30 1/min
Cutting angle: 2 °
Back gauge: 750 mm
Motor power: 7 kW
Table height: 800 mm
Table width: 530 mm
Table length: 2355 mm
Length: 2720 mm
Width: 1630 mm
Height: 1230 mm
Weight: 3200 kg
Cutting length: 2050 mm
Max. thickness - mild steel: 6 mm
Strokes: 30 1/min
Cutting angle: 2 °
Back gauge: 750 mm
Motor power: 7 kW
Table height: 800 mm
Table width: 530 mm
Table length: 2355 mm
Length: 2720 mm
Width: 1630 mm
Height: 1230 mm
Weight: 3200 kg
Max. thickness - mild steel: 6 mm
Strokes: 30 1/min
Cutting angle: 2 °
Back gauge: 750 mm
Motor power: 7 kW
Table height: 800 mm
Table width: 530 mm
Table length: 2355 mm
Length: 2720 mm
Width: 1630 mm
Height: 1230 mm
Weight: 3200 kg
4
Metal working and machine toolsMilling machinesUniversal milling machines
x-Weg: 1700 mmy-Weg: 1200 mmz-Weg: 1600 mmTischfläche: 1700x1200 mmDrehzahl: 35-1800 U/minVorschub: 20-1550 m/minSpindel: 300 mmAusladung: 1200 mm
x-Weg: 1700 mm
y-Weg: 1200 mm
z-Weg: 1600 mm
Tischfläche: 1700x1200 mm
Drehzahl: 35-1800 U/min
Vorschub: 20-1550 m/min
Spindel: 300 mm
Ausladung: 1200 mm
y-Weg: 1200 mm
z-Weg: 1600 mm
Tischfläche: 1700x1200 mm
Drehzahl: 35-1800 U/min
Vorschub: 20-1550 m/min
Spindel: 300 mm
Ausladung: 1200 mm
9
Metal working and machine toolsLathes
Swing over bed: 600 mm
Distance between centers: 2000 mm
Centre height: 300 mm
Spindle bore: 80 mm
swing over cross slide: 400 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 90 M
Spindle speed steps: 21
Spindle revs: 20 - 2000 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: 60 - 1/4 Tpi
Module thread range: 0.125 - 30
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7.5 kW
Length: 3600 mm
Width: 1250 mm
Height: 1400 mm
Weight: 3110 kg
Swing over bed: 600 mm
Distance between centers: 2000 mm
Centre height: 300 mm
Spindle bore: 80 mm
swing over cross slide: 400 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 90 M
Spindle speed steps: 21
Spindle revs: 20 - 2000 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: 60 - 1/4 Tpi
Module thread range: 0.125 - 30
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7.5 kW
Length: 3600 mm
Width: 1250 mm
Height: 1400 mm
Weight: 3110 kg
Distance between centers: 2000 mm
Centre height: 300 mm
Spindle bore: 80 mm
swing over cross slide: 400 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 90 M
Spindle speed steps: 21
Spindle revs: 20 - 2000 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: 60 - 1/4 Tpi
Module thread range: 0.125 - 30
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7.5 kW
Length: 3600 mm
Width: 1250 mm
Height: 1400 mm
Weight: 3110 kg
2
Metal working and machine toolsSheet metal working machines
pressing capacity: 100 to
Stroke: 400 mm
Table: 800 x 500 mm mm
Daylight: 500 mm
Rapid speed: 110 mm/s
Working speed: 10 mm/s
Retraction speed: 160 mm/s
Motor: 11 kW
Working pressure: 250 bar
Length: 1900 mm
Width: 1700 mm
Height: 2930 mm
Weight: 5500 kg
pressing capacity: 100 to
Stroke: 400 mm
Table: 800 x 500 mm mm
Daylight: 500 mm
Rapid speed: 110 mm/s
Working speed: 10 mm/s
Retraction speed: 160 mm/s
Motor: 11 kW
Working pressure: 250 bar
Length: 1900 mm
Width: 1700 mm
Height: 2930 mm
Weight: 5500 kg
Stroke: 400 mm
Table: 800 x 500 mm mm
Daylight: 500 mm
Rapid speed: 110 mm/s
Working speed: 10 mm/s
Retraction speed: 160 mm/s
Motor: 11 kW
Working pressure: 250 bar
Length: 1900 mm
Width: 1700 mm
Height: 2930 mm
Weight: 5500 kg