Bending length: 1550 mm
Max. bending capacity - mild steel: 4.5
Max. plate thickness without prebending - mild steel: 4.5 mm
Max. plate thickness with prebending - mild steel: 3.5 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2.5 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3300 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2370 kg

Drilling capacy mild steel: 32 mm
Taper: MK 3
Distance spindle - column: 250 mm
Revs: 65 - 125 - 185 - 365 - 540 - 1.055 - 1.560 - 3.060 r.p.m.
Tapping capacity: M24
Feeds: Automatisch 0,10 - 0,20 - 0,30 (3) mm/r
Column diameter: 100 mm
Distance spindle - table: 85 - 635 mm
Distance spindle-base: 1.17 mm
Table: 300 x 270 mm
Base dimensions: 665 x 400 mm
Quill travel: 120 mm
Length: 665 mm
Width: 640 mm
Height: 2100 mm
Weight: 260 kg

Swing over bed: 860 mm
Distance between centers: 3000 mm
Centre height: 430 mm
Spindle bore: 135 mm
swing over cross slide: 620 mm
Width of bed: 560 mm
Spindle nose / DIN55027: 11
Spindle taper: 140 M
Revs continuous variable: 7 - 42, 28 - 170, 165 - 1.015 rpm
Number of feeds: 150
Longitudinal feed range: 0.039 - 18 mm/r
Cross feed range: 0.02 - 9 mm/r
Metric thread range: 0.5 - 180 mm
Inch thread range: 60 - 1/6 Tpi
Module thread range: 0.125 - 45
DP thread range: 240
Cross slide travel: 435 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 15 kW
Weight: 4650 kg

Drilling capacy mild steel: 40 mm
Taper: MK 4
Distance spindle - column: 350 mm
Revs: 132-194-277-319-466-666-883-1296-1852 r.p.m.
Motor: 2.2 kW
Tapping capacity: M33
Feeds: 0,1 - 0,2 - 0,3 mm/r
Column diameter: 150 mm
Distance spindle - table: 80 - 880 mm
Distance spindle-base: 1225 mm
Table: 480 x 480 mm
Quill travel: 175 mm
Length: 755 mm
Width: 480 mm
Height: 2280 mm
Weight: 490 kg

Drilling capacy mild steel: 35 mm
Taper: MK 4
Distance spindle - column: 300 mm
Motor: 1.5 kW
Tapping capacity: M27
Column diameter: 125 mm
Distance spindle - table: 90 - 890 mm
Distance spindle-base: 1250 mm
Table: 400 x 420 mm
Quill travel: 150 mm
Length: 755 mm
Width: 480 mm
Height: 2205 mm
Weight: 385 kg

Saw frame: Double column
Band dimensions: 10430x54x1,6 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 750 mm
Cutting capacity 0° flat: 1300x700 mm
Cutting capacity 45°: rechteck 850 x 750 mm
Cutting capacity 60°: rechteck 570 x 750 mm
Cutting capacity - 45°: rechteck 850 x 750 mm
Working height: 930 mm
Hydraulic motor: 4 kW
Motor: 11 kW
Coolant pump motor: 0.12 kW
Length: 5500 mm
Width: 2280 mm
Height: 3400 mm
Weight: 8500 kg

Saw frame: Double column
Band dimensions: 6800x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 560 mm
Cutting capacity 0° flat: 820 x 540 mm
Cutting capacity 45°: rechteck 550 x 540 mm
Cutting capacity 60°: rechteck 360 x 540 mm
Cutting capacity - 45°: rechteck 550 x 540 mm
Working height: 880 mm
Hydraulic motor: 1.1 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3800 mm
Width: 1750 mm
Height: 2350 mm
Weight: 3200 kg

Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. coil width for version with pneumatic downholder: 80 mm
Length: 1600 mm
Width: 1550 mm
Height: 2000 mm
Weight: 580 kg

Cauhe II

Year 2004
Format: 82x112 cm
Weight 4400 kg
Heated Plate

Bending length: 1550 mm
Max. bending capacity - mild steel: 12
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 220 mm
Lower roll diameter: 200 mm
Lateral roll diameter: 160 mm
Bending speed: 1,5 / 6 m/min
Motor power: 5.5 kW
Length: 3900 mm
Width: 1150 mm
Height: 1250 mm
Weight: 3600 kg

Trotec 8005 professional C100

Head Extraction
Chiller Unit
Max workpiece surface 1500x1500 x 135 mm
Power consumption: 2600W/25A

Grassair / Allup compressor RLR30V8T

Capacity: 234 m3/h
bar max: 9.25
KW: 22

Simplacutter VI

Max dimensions: 200x 120 cm

Stock A134R-R5PS6M / 1650 x 2050P Laming machine

Sheet to board laminating machine for producing displays and packing material

Horizon AC 8000 S collating machine

* collating stations
* suctions feeder
* jogger with cris cross

Sallmetal Laminating machine

S1050

Max Laminating size: 105 cm

Heidelberg KSB Cilinder

Format 40x57 cm

Polar Mohr 78 ED paper guillotine

Technical data:
Cutting width 780mm
Stack height 120mm
Color LCD display
Power supply 400V
Weight 1400 kg
Side tables
Chrome table surface

Spare knife, cutting sticks, tapping block, maintenance tools.

OKS Air receiver tank, Serial: 575531, 2012, 500L tank, 11Bar

Precia Access Mini400 platform scale, stainless, max weigh 55Kgs, 0.00Kgs, 1Ph

Salmson Priuxmaster, Serial: D4080, Circulating pump 4x

BuschVacuum pumps, Three vac pumps, models: RA0255 / WV0500 / RA0250, can be bough as a package or individually

pressing capacity: 50 to
Cylinder fix or moveable: horizontal moveable
Stroke: 350 mm
Daylight: 900 mm
Distance between columns: 900 mm
Working speed: max. 9 mm/s
Horizontal movable cylinder: 550 mm
Length: 1700 mm
Width: 700 mm
Height: 2100 mm
Weight: 720 kg

Swing over bed: 600 mm
Distance between centers: 1500 mm
Centre height: 300 mm
Spindle bore: 80 mm
swing over cross slide: 400 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 90 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 20 - 100, 80 - 400, 400 - 2000 rpm
Longitudinal feed range: max. 8 m/min
Cross feed range: max. 8 m/min
Cross slide travel: 290 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Z-axis servo drive: 3,5 / 22 kW/Nm
X-axis servo drive: 1,75 / 11 kW/Nm
Spindle max. torque: 120 Nm
Tow strength Z-axis: 1250 daN
Tow strength X-axis: 1050 daN

Tragfähigkeit: 2000 kg
Greifbereich: 550-650 mm
Aufhängung / Größe BxL: . 0
Eigengewicht: . kg
Tragkraft: 2 t
Spannweite: . mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m

Load capacity: 2000kg
Gripping range: 1050-1200 mm
Suspension / size WxL: . 0
Own weight: 180 kg
Load capacity: 2 t
Span: . mm
Total power requirement: . kW
Machine weight approx.: . t
Space requirement approx.: . m

Shrink packaging FL5545TB L sealer and shrink tunnel, Serial: 872, 2012, L sealer on conveyor, sealing bars 550mm x 450mm, into shrink tunnel, aperture 400mm x 220mm, variable speed conveyor and adjustable temperature controls, mobile, 3Ph

Record Panda1000 flow wrapper, Serial: 300376, flow wrapper, adjustable temperature jaws and crimpers, infeed length 1500mm, overall length 3500mm, variable speed, jaw width 300mm, 3Ph

x-Weg: 10000 mm
y-Weg: 1100 mm
z-Weg: 1700 mm
Steuerung: Heidenhain
Typ: TNC 155
Werkzeugwechsler: 30
Tischfläche: 10000x1000 mm
Höhe des Tisches über Flur: 800 mm

SMIpack SL55 Lsealer Serial: 52137 2015, sealing bar 560mm x 430mm, max pack height 260mm, up to 300 products per hour, mobile, 3Ph

Punching power: 55 ton
Throat depth: 500 mm
Max. diameter at sheet thickness (mild steel): 40 x 10 mm
Max. number of strokes at 20 mm stroke: 37 1/min
Motor: 5 kW
Length: 1550 mm
Width: 1200 mm
Height: 1950 mm
Weight: 1150 kg

Faceplate diameter: 1200 mm
Swing diameter: 1500 mm
Turning height: 1300 mm
Support adjustment: 800 mm
Side support - horizontal adjustment: 550 mm
Digital display: Heidenhain
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Turning diameter: 820 mm
Turning length: 300mm
Turning diameter over support: 465 mm
Spindle torque: 3000 Nm
Speed: 5.6-1120 rpm
Feed: 1-5000mm/min
Rapid traverse: 5000 mm/min
Tailstock quill mount MK: 6
Three-jaw chuck Forckrath: mm
Bezel: mm
Main drive motor: 50 kW
Main spindle diameter: 170 mm
Spindle passage: 128 mm
Tailstock quill diameter: 125 mm
Tailstock quill stroke: 250 mm
z-axis: 3000 mm
x-axis: 550 mm
Total power requirement: 52 kW
Machine weight approx.: 7.1 t
Space requirement approx.: m

Scissor lift

380 volts
Max weight: 1200 kg.
Easy loading with pallet truck.
Equipped with foot protection.

Max height: 78 cm
Min height: 8 cm

Dimensions: 1.3 x 0.9 meters (suitable for Euro pallets)

Heidelberg SBB ( 56×82 cm) Gray cylinder

Very nice Heidelberg SBB cylinder

Fitted with safety covers with switches.
Electronics renewed.

Complete with 2 punch frames

Ref. no.: 18255
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar

Measurements and weight
Machine weight: 13500 kg

Robot
Producer: Wittman
Type: W743
Year: 2009

Hans Wahli stream feeder

complete with delivery belt

Polar RAB 4 Jogger

Year: 1998
With automatic side flaps and air removing roller

Polar 78 ES

Year 1996
Chrome air table
Complete with tools and spare knife

Bizerba S121 Meat tenderizer Serial: 11437855 2017, can be used as a strip cutter or tenderizing of meat. Ideal for turning fresh meat and cold cuts as well as fruit and veg into fine salads, tabletop, 1Ph

Turbovac TV5575 Dip tank Serial: 20151529 2015, stainless dip tank, shrink tank, platform dimensions 730mm x 535mm, dipping length 300mm, max product height 250mm, max water capacity 130l, max product weight 30Kgs, adjustable temp control, exhaust hood, with outfeed conveyor, mobile, 3Ph

Temperature range: in Helium 2275 ° C
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good

High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.

Stainless sanitiser tunnel, variable speed, forward / reverse, top mounted jets, side inspection door, conveyor dimensions 3500mm x 300mm, max tray 550mm W x 490mm H, 3Ph

Bending length: 3200 mm
Sheet thickness (420 N/mm²): 1 mm
Max. thickness - stainless steel: 0.6 mm
Max. thickness - aluminium: 15 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 750 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 4500 mm
Width: 2100 mm
Height: 1650 mm
Weight: 2900 kg

Bending length: 2550 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 750 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 0-20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 3800 mm
Width: 2100 mm
Height: 1650 mm
Weight: 2500 kg

Bending length: 2550 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 1000 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 0-20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 3800 mm
Width: 2350 mm
Height: 1650 mm
Weight: 2500 kg

Stock LM 123


A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.

Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.

Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.

A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).

Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt

Beck MP 240 X Foil Packaging Machine
Model: Multiplex type MP

Year: 2003

Beck packautomaten,

complete with shrink tunnel

Label Producing BLUMER ATLAS 115,
complete line with die cutting unit D-18 and Bandrolling Machine PB 18.1 incl. strip feeder of Blumer and delivery table behind Blumer, size min: 25×45 mm, max. 150×180 mm,