Outreach: 3500 mm
Load capacity in kg: 1000 kg
Pan range: at least 160 degrees
Height: 3000mm
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Faceplate diameter: 1200 mm
Swing diameter: 1500 mm
Turning height: 1300 mm
Support adjustment: 800 mm
Side support - horizontal adjustment: 550 mm
Digital display: Heidenhain
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m

Turning diameter: 820 mm
Turning length: 300mm
Turning diameter over support: 465 mm
Spindle torque: 3000 Nm
Speed: 5.6-1120 rpm
Feed: 1-5000mm/min
Rapid traverse: 5000 mm/min
Tailstock quill mount MK: 6
Three-jaw chuck Forckrath: mm
Bezel: mm
Main drive motor: 50 kW
Main spindle diameter: 170 mm
Spindle passage: 128 mm
Tailstock quill diameter: 125 mm
Tailstock quill stroke: 250 mm
z-axis: 3000 mm
x-axis: 550 mm
Total power requirement: 52 kW
Machine weight approx.: 7.1 t
Space requirement approx.: m

Scissor lift

380 volts
Max weight: 1200 kg.
Easy loading with pallet truck.
Equipped with foot protection.

Max height: 78 cm
Min height: 8 cm

Dimensions: 1.3 x 0.9 meters (suitable for Euro pallets)

Heidelberg SBB ( 56×82 cm) Gray cylinder

Very nice Heidelberg SBB cylinder

Fitted with safety covers with switches.
Electronics renewed.

Complete with 2 punch frames

Ref. no.: 18255
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar

Measurements and weight
Machine weight: 13500 kg

Robot
Producer: Wittman
Type: W743
Year: 2009

Further information:
ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology

The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility.

Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system.

⸻

🔍 Advantages of the ENGEL Victory Series

✔ Tie-Bar-Less Design

The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction.

This system offers several important advantages:

• Larger moulds can be installed easily
• Easier access for complex mould geometries
• Reduced mould changeover times
• Easier robot integration
• More efficient use of production space

This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications.

⸻

✔ Wittmann Robot Integration

The machine has been operated together with a Wittmann robot.

Robot specifications:

• Wittmann W743-0424
• Year of manufacture: 2009
• Payload capacity: 25 kg
• X-axis: 1200 mm
• Y-axis: 1600 mm
• Z-axis: 4000 mm

This configuration provides major advantages for automated production processes.

⸻

🔍 Machine Operating System

The ENGEL Victory Tech series operates with a servo-hydraulic system.

✔ Hydraulic System:

• Clamping unit
• Injection movements
• Ejector system
• Mould movements

are driven by a high-performance hydraulic system.

✔ Thanks to the servo-controlled hydraulic system:

• Only the required amount of energy is consumed
• Power consumption is significantly reduced
• Quieter operation is achieved
• Production stability is improved

Unlike older conventional hydraulic machines, the machine does not run continuously at full power.

The servo pump system operates only when needed, providing the following advantages:

• Lower energy costs
• Reduced heat generation
• Longer component lifetime
• More stable processing conditions

x-travel: 30000 mm
y-travel: 3600 mm
z-travel: 1900 mm
Control: Heidenhain
Type: TNC 530 i
Milling head - pivoting: CNC
Speed: 4000 rpm
Cone mount: DIN 69871+AD mm
Spindle motor: 46 kW
Feed: 10000mm/min
Rapid traverse: 25000 mm/min
Chip conveyor: 2 pcs.
Panel field: 30000x3000 mm
Total power requirement: 85 kW
Machine weight approx.: t
Space requirement approx.: m

Hans Wahli stream feeder

complete with delivery belt

Polar RAB 4 Jogger

Year: 1998
With automatic side flaps and air removing roller

Dorit VV3-450 vacuum tumbler, Serial: 941000323, Stainless, 450l vacuum tumbler, variable speed drum, with manual, with vacuum pump, 3Ph

Pokomat P16/320 Injector, Stainless, 16 needle injector, capacity 800Kgs/h, with two sets of needles, belt dimensions 1300mm x 300mm, 3Ph

Frampton FR1-3 Flash roaster, Stainless flash roaster, used when pre cooked meats need to have a roast finish, allows products such as hams to be roasted in under 3mins and still cool enough to be packed, ideal for meats, fish, veg and more, belt dimensions 2100mm x 140mm, variable speed, adjustable temp control, mobile, 3Ph

Bizerba S121 Meat tenderizer Serial: 11437855 2017, can be used as a strip cutter or tenderizing of meat. Ideal for turning fresh meat and cold cuts as well as fruit and veg into fine salads, tabletop, 1Ph

Turbovac TV5575 Dip tank Serial: 20151529 2015, stainless dip tank, shrink tank, platform dimensions 730mm x 535mm, dipping length 300mm, max product height 250mm, max water capacity 130l, max product weight 30Kgs, adjustable temp control, exhaust hood, with outfeed conveyor, mobile, 3Ph

Nock C460 Meat derinder Serial: 1956290 Stainless, cutting width 430mm, cutting speed 19m/min, with 10 spare brand new blades, 0.75Kw, mobile, 3Ph

Temperature range: in Helium 2275 ° C
Combustion Ø x hight: 114 x 153
Total power: 20 kW
Space requirement (W x D x H): 1,55 x 0,65 x 1,9 m
Weight of machine: 640 kg
Condition: very good

High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes, the heating element is made of graphite and the oven was used for sintering ceramic components.

Stainless sanitiser tunnel, variable speed, forward / reverse, top mounted jets, side inspection door, conveyor dimensions 3500mm x 300mm, max tray 550mm W x 490mm H, 3Ph

2007, Stainless mixer aerator, 500L, mobile frame, see link for all spec http://www.shufflemix.com/en/aerators/shufflemixer-250-1000/

2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph

Shuffle-mix 250 mixer / aerator, Serial: 200-103 Stainless mixer, 250L, mobile frame, see http://www.shufflemix.com/en/aerators/shufflemixer-250-1000/ for all spec

Bending length: 3200 mm
Sheet thickness (420 N/mm²): 1 mm
Max. thickness - stainless steel: 0.6 mm
Max. thickness - aluminium: 15 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 750 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 4500 mm
Width: 2100 mm
Height: 1650 mm
Weight: 2900 kg

Bending length: 2550 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2 mm
Antrieb: Motorized
Max. bending angle: 155 °
Max. opening: 110 mm
Back gauge: 750 mm
Back gauge speed: 300 mm/s
Back gauge accuracy: 0.1 +/- mm
adjustment range of the bending flange max.: 0-20 mm
Bending speed: 100 °/sek
Max. clamping speed: 90 mm/s
Length: 3800 mm
Width: 2100 mm
Height: 1650 mm
Weight: 2500 kg

pressing capacity: 600 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 3100 mm
Gap in side frame: 410 mm
Daylight: 700 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 280 l
Length: 5750 mm
Width: 2500 mm
Height: 4000 mm
Weight: 40500 kg

Stock LM 123


A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.

Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.

Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.

A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).

Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt

Beck packautomaten,

complete with shrink tunnel

Tischgröße: 1300x650 mm
Arbeitshöhe: 350 mm
Stärke der Platten: . mm

Temperaturbereich: Max. 30 °C
Heizleistung: . kW
Kühlleistung: . W
Umlaufmedium: 30 Grad
Gesamtleistungsbedarf: 4,5 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

x-Weg: 6300 mm
y-Weg: 2200 mm
Werkstückhöhe: 1835 mm
Tischfläche: 6000x1835 mm
Support: 2
Seitensupport: 2
Anzahl der T-Nuten: 7
T-Nuten - Abstand: 240 mm
T-Nuten - Breite: 28 mm
Bettlänge: 14650 mm
Ständerdurchgang: 2075 mm
Vorschub: 5-60 m/min
Werkstückgewicht: 15000 kg
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 55 t
Raumbedarf ca.: 14,65x4,37x4,05 m

Leistung: 5,5 KW
Druckbehälter: 50 L
Maschinengewicht ca.: 0,450 t
Raumbedarf ca.: . m
Förderdruck: 330 bar
Literleistung: . l

Druck: 630 KN
Ständerweite: 800 mm
Hub: 150 mm
Tischfläche: 720x550 mm
Stößelfläche: 720x520 mm
Einbauhöhe: 420 mm
Eilsenkgeschwindigkeit: 394 mm/sec
Arbeitsgeschwindigkeit: 71/17 mm/sec
Rücklaufgeschwindigkeit: 390 mm/sec
Verstellwege der Hublage: 120 mm
Gesamtleistungsbedarf: 15 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Revs: 40 -3200 r.p.m.
Taper: ISO 40
Working area: 600 x 500 x 400 mm
Table: 1000 x 500 mm
Motor: 3.75 kW
Rapid feed in all 3 axes: 1000 mm/min
Clamping slots: 8
Width x Distance: 14 x 63 mm
Maximal table load: 300 kg
Travel longitudinal: 600 mm
Travel cross: 500 mm
Travel vertical: 400 mm
Feeds stepless X,Y range: 0 - 600 mm/min.
Feeds stepless Z range: 0 - 600 mm/min.
Horizontal spindle number of rates: 40 - 3200
Vertical spindle number of rates: 40 - 3200
Spindle swivelling: +/- 90° °
Quill travel: 100 mm
Clamping of tools: manuell
Spindle motor: 3 kW
vertical table: 1200 x 250 mm
Distance vertical milling spindle - milling table: 160 - 660 mm
Distance horizontal milling spindle - milling table: 95 - 495 (2. T-Nut), 180 - 580 (3. T-Nut) mm
Weight: 1814 kg

Revs: 65 - 2600 r.p.m.
Taper: ISO 40
Working area: 420 x 220 x 380 mm
Table: 840 x 390 mm
Motor: 2.2 kW
Working table clamping surface: 840 x 390 mm
Rapid feed in all 3 axes: 1000 mm/min
Clamping slots: 5
Width x Distance: 14 x 63 mm
Maximal table load: 200 kg
Travel longitudinal: 420 mm
Travel cross: 220 mm
Travel vertical: 380 mm
Feeds stepless X,Y range: 0 - 600 mm/min.
Feeds stepless Z range: 0 - 600 mm/min.
Horizontal spindle number of rates: 65 - 2600
Distance of spindle axis from frame guide ways: 90 - 310 mm
Vertical spindle number of rates: 65 - 2600
Spindle swivelling: +/- 90° °
Quill travel: 100 mm
Clamping of tools: manuell
Spindle motor: 2 kW
vertical table: 950 x 250 mm
Distance vertical milling spindle - milling table: 90 - 310 mm
Distance horizontal milling spindle - milling table: 100 - 480 mm
Length: 1600 mm
Width: 1700 mm
Height: 2000 mm
Weight: 1145 kg

pressing capacity: 100 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X Achse
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Table height: 900 mm
Table width: 104 mm
Motor power: 11 kW
Length: 4200 mm
Width: 1670 mm
Height: 2850 mm
Weight: 8500 kg

pressing capacity: 60 to
Bending length: 1250 mm
Axes: 3 (Y1, Y2, X)
Stroke: 265 mm
Inside distance between side frames: 1050 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 110
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 7.5 kW
Length: 2300 mm
Width: 1550 mm
Height: 2850 mm
Weight: 4700 kg

pressing capacity: 160 to
Bending length: 4050 mm
Axes: Y1 / Y2 und X Achse
Stroke: 200 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 300 mm
Daylight: 430 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 858 mm
Table width: 104 mm
Motor power: 15 kW
Length: 4850 mm
Width: 1900 mm
Height: 2610 mm
Weight: 10500 kg

Drilling capacy mild steel: 42 mm
Taper: MK 4
Distance spindle - column: 280 – 1.100 mm
Revs: 44 – 1.500 (12) r.p.m.
Tapping capacity: Stahl: M 25, Guss: M 38
Distance table - spindle underside: 470 – 1.270 mm
automatic feed: 0,05 – 0,15 (3) mm/min
Spindle motor: 2.2 kW
Column diameter: 260 mm
Quill travel: 280 mm
Table: 1.725 x 715 x 180 mm
Box table dimensions: 635 x 520 x 415 mm
max. height: 2530 mm
Length: 1880 mm
Width: 870 mm
Height: 2210 mm
Weight: 1800 kg

Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: Array
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg

Revs: 50 – 1700 (12) r.p.m.
Taper: ISO 40
Working area: 600/210/400 mm
Table: 800 x 225 mm
Spindle motor: 1 kW
Length: 1500 mm
Width: 1350 mm
Height: 1850 mm
Weight: 950 kg

pressing capacity: 220 to
Bending length: 6050 mm
Axes: Y1 / Y2 / X
Stroke: 265 mm
Inside distance between side frames: 5100 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 1050 mm
Table width: 154 mm
Oiltank: 250 l
Motor: 22 kW
Length: 7500 mm
Width: 1770 mm
Height: 3350 mm
Weight: 20800 kg

pressing capacity: 320 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X
Stroke: 365 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1770 mm
Height: 2850 mm
Weight: 20000 kg

pressing capacity: 600 to
Bending length: 6050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 5100 mm
Gap in side frame: 510 mm
Daylight: 700 mm
Power concept: hydraulic
rapid speed Y-axis: 80 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 80
Back gauge travel X-axis: 750 mm
Oiltank: 280 l
Motor: 2 x 11 kW kW
Length: 7600 mm
Width: 2650 mm
Height: 3950 mm
Weight: 52500 kg

pressing capacity: 400 to
Bending length: 6050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 5100 mm
Gap in side frame: 510 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 150 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 150
Back gauge travel X-axis: 750 mm
Oiltank: 160 l
Motor power: 2x11 kW
Length: 7500 mm
Width: 2110 mm
Height: 3810 mm
Weight: 34600 kg

pressing capacity: 320 to
Bending length: 6050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 5100 mm
Gap in side frame: 450 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 1100 mm
Table width: 154 mm
Oiltank: 160 l
Motor power: 2 x 11 kW
Length: 7500 mm
Width: 1910 mm
Height: 3350 mm
Weight: 29000 kg

pressing capacity: 400 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X und R Achse
Stroke: 365 mm
Inside distance between side frames: 3400 mm
Gap in side frame: 410 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Motor: 2 x 11 kW
Length: 5750 mm
Width: 2110 mm
Height: 3450 mm
Weight: 27780 kg

pressing capacity: 60 to
Bending length: 2050 mm
Axes: 3 (Y1, Y2, X)
Stroke: 265 mm
Inside distance between side frames: 1700 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 110
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor: 7.5 kW
Back gauge: 650 mm
Length: 3200 mm
Width: 1550 mm
Height: 2850 mm
Weight: 5600 kg

Revs: 50 – 1700 (12) r.p.m.
Taper: ISO 40
Working area: 600/210/400 mm
Table: 800 x 225 mm
Spindle motor: 1 kW
Length: 1700 mm
Width: 1500 mm
Height: 1960 mm
Weight: 950 kg

Bending length: 2040 mm
Sheet thickness (420 N/mm²): 0.8 mm
Max. bending angle: 70 °
Length: 2400 mm
Width: 750 mm
Height: 850 mm
Weight: 290 kg

Revs: 40 – 1.300 r.p.m.
Taper: ISO 30
Working area: 465 x 230 x 380 mm
Table: 1000 x 280 mm
Motor: 2.2 kW
Spindle head tiltable left-right: 90 °
Spindle speed (load-free): 115 – 1.750 (115, 230,290,360,580,720,875,1.750) rpm
Length: 1400 mm
Width: 1300 mm
Height: 2200 mm
Weight: 1120 kg

Max. thickness - mild steel: 5 mm
Throat depth: 1200 mm
Speed: 4 m/min
min / max diameter: 250 / 2000 mm
gap on blade side: 300 mm
Length: 3000 mm
Width: 750 mm
Height: 1400 mm
Weight: 1350 kg

Sheet Thickness - mild steel: 0.4 - 4 mm
Max. sheet width: 100 mm
Max. cross-section: 400 mm
Feed roll diameter: 80 mm
Feeding speed: 75 m/min
Feeding acceleration: 10 m/s²
Motor torque: 10 Nm